PSOSSO3B [MACOM]
Versatile Power Entry Module with Small Footprint; 多功能电源输入模块,占地面积小型号: | PSOSSO3B |
厂家: | Tyco Electronics |
描述: | Versatile Power Entry Module with Small Footprint |
文件: | 总9页 (文件大小:849K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Catalog: 1654001
Issue Date: 06.2011
Corcom Product Guide
Versatile Power Entry Module with Small Footprint
P Series
UL Recognized
CSA Certified
VDE Approved
PE filtered
PS non-filtered
PS filtered
P Series
L models
feature a high performance medical filter
The P series CHAMELEON power entry module offers
the most popular features in a small footprint design
designed to help bring most digital equipment
(including switching power supplies) into compliance
with EN55022, Level B (as well as FCC part 15J, Class
B) conducted emissions limits. They are available
with current ratings of 6 and 10A. These high
performance versions are only available with
mounting ears, single voltage selection, in a complete
RFI shield with options for switch, fuses and current
ratings. Mounting extenders are not compatible with
the L or Z models.
As the first 10A module to provide all five power
entry functions in one compact design, the
chameleon module readily adapts to its environment
and the needs of international markets.
• Snap-in or flange mounting
• Standard IEC 60321-1 C14 power inlet
• Both North American and metric fusing
capabilities
Z models
provide a high performance three element
• Two voltage selection options (for 4-voltage
selection, see the M, L or LA Series)
differential mode circuit filter, with extended EMI
attenuation similar to the M Series Z models, to help
bring most digital equipment (including switching
power supplies) into compliance with EN55022, Level
B (as well as FCC Part 15J, Class B) conducted emis-
sions limits. They are available with current ratings of
6 and 10A. These high performance versions are only
available with mounting ears, single voltage selection,
in a complete RFI shield with options for switch, fuses
and current ratings. Mounting extenders are not
compatible with the L or Z models. For minimum
depth behind the panel, see the M Series
• Optional DPST on/off switch
• Filter options for general purpose, medical and
high-performance EMI filtering
The CHAMELEON module’s compact design and
modular construction allows selection of the required
power entry feature — without altering the panel
cutout. And the CHAMELEON module, with its
optional adapters, will fit several common panel
cutouts.
B models are non-filtered and incorporate an inter-
connection block. The block connects the voltage
selection terminals of an unfiltered CHAMELEON
module with an IEC connector and an optional switch
to reduce external wiring. Compatible with the A or B
RFI shield options.
Filter Types
The CHAMELEON module has four filter and one
non-filtered option:
S models provide an extended performance two
element circuit EMI filter, with attenuation similar to
the EEB Series power inlet filter. It offers protection
for general purpose applications with stray Line to
Ground and Line to Line noise that must be attenu-
ated at the power inlet. These filters have limited
leakage current and are available in current ratings of
3, 6 and 10A.
H models provide susceptibility protection with
minimal leakage current, and are suitable for patient
care and non-patient care medical equipment.
192
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
For email, phone or live chat, please go to
te.com/help
corcom.com
Catalog: 1654001
Issue Date: 06.2011
Corcom Product Guide
Versatile Power Entry Module with Small Footprint (continued)
P Series
Ordering Information
Part numbers are constructed by selecting the alphanumeric character which represents the desired feature.
Note: For any option where shown as “0” use the digit ZERO (0) not the letter (O).
Mounting
Style
Extender
Options!
Switch
Options*
Voltage
Select"
Fuse
Options
Filter
Type
Filter
Current
Shield
Options!
P S J 0 X S S 6 0
Mounting Style
E = Mounting ears
(Horizontal axis)
S = Snap-in
M = Mounting ears
(Vertical axis)
Switch Option
Fuse Options
D = Dual fuse
S = Single fuse
Filter Current
0 = No filter
3 = 3A
6 = 6A
X = 10A
0 = Blank
S = Double pole
single throw
(DPST)
3
Extender
Input Voltage Select
Filter Type
Shield Options
0 = No shield
A = Filter shield
B = Complete
Shield
Option
0 = Single voltage
S = Dual voltage"
select (SMPS)
0 = No filter
0 = None
C = FN260
J = J Series
L = L Series!
B = Interconnection
block#
H = Medical Filter
X = Dual voltage"
select (series/parallel)
L = High Performance C = Complete can
Medical4
(for L & Z models)
S = General purpose
Z = High Performance4
Notes:
1
Extender for
J-Series or others
L Series extender cannot be added to units
with a shield. No style of extender can be
added to units with B or C shields.
Fuse holder
2
3
Dual voltage options are not available with
L or Z Filter Types
When using the interconnection block, the last
3 digits of the part number are BX (0, A, or B)
4 High performance versions (L or Z filter types)
are available with any switch or fuse option but
only in 6 or 10A with horizontal (PE) or
Optional switch
vertical (PM) mounting ears, single voltage (0),
complete shield (C) and no extenders
*
For alternative switch orientation options,
please contact technical support or your
Corcom product sales representative
Optional filter
The part number PS0SXSS6B would represent:
P Series (P) with a snap-in mount (S) with no extender (0) a switch (S) dual voltage select (X) single fusing (S)
general purpose filter (S) for 6A (6) with a B shield (B)
193
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
For email, phone or live chat, please go to
te.com/help
corcom.com
Catalog: 1654001
Issue Date: 06.2011
Corcom Product Guide
Versatile Power Entry Module with Small Footprint (continued)
P Series
Voltage Selection
Shield Options
P series power entry modules include the voltage
selector integral with the fuse holder. Three voltage
selection options are each supported by one of three
different fuse holders. The fifth digit of the part
number specifies which of the three fuse holders is
included to provide the desired voltage selection.
The single voltage fuse holder (option “0”) has no
voltage indication markings. The dual voltage options
select 115V or 230V by removing the fuse holder, flip-
ping it over, and reinstalling it. Voltage selection is
indicated through a window in the P Series door. The
“SMPS” fuse holder (option “S”) jumpers two inde-
pendent P Series terminals to indicate 230V
The P series offers several RF shield options. The
metal shield, optional on S, H and B filtered models,
provides shielding from radiated emissions and
provides an RF ground for the filter to the panel. This
shield is available in two versions; a shield of the filter
components (designated by an A as the final digit)
and a complete shield (designated by B as the final
digit).
The A shield covers the filter portion of the module
and increases performance of the filter by protecting
the components from RFI coupling. This shield
allows the use of the C or J extender.
operation to a switching mode power supply. The
“PRSR” parallel/serial fuse holder (option “X”)
connects the windings of the equipment’s dual
primary transformer (not included) to step down the
voltage or double up the current. The markings on
the voltage selection fuse holders also remind the
user to install the appropriate fuse for the current at
the selected voltage.
The B shield covers the entire power entry module
with metal, protecting the filter from RFI coupling,
and covering the mounting cut-out to block RFI
entering or leaving the equipment. The B shield
cannot be used with any extender.
A complete metal enclosure is integral to both the
high performance L and Z models, and must be spec-
ified by a C in the part number’s final digit. This
option is only available with the L or Z models.
Input Voltage Selection Schemes
S - “SPMS” Jumper Type
115V
230V
Power on/off
Power
input
Hot
Ground
Neutral
G
H
A
B
C
Note
Note
1
1
Note
Note
1
1
Sel.
Jumpers
D
SMPS
Provision for
single fusing
X - “PRSR” Parallel / Serial Type for
Dual Primary Transformer
115V
230V
Power on/off
“A” Shield
G
A
B
C
Hot
Ground
Neutral
115V
115V
Note
Note
2
2
Note
Note
1
1
“B” Shield
H
D
Transformer
primary
Provision for
single fusing
194
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
For email, phone or live chat, please go to
te.com/help
corcom.com
Catalog: 1654001
Issue Date: 06.2011
Corcom Product Guide
Versatile Power Entry Module with Small Footprint (continued)
P Series
Fuseholder
Accessories
GA400
: NEMA 5-15P to IEC 60320-1 C-13 line cord
Another feature of the P series power entry module is
the versatile fusing arrangement. The fuse holder can
hold two 1/4” x 1-1/4” (3AG) or 5 x 20mm (metric)
fuses. Single fusing is supported with a conversion
clip that shorts one of the two fuse positions, and is
designated by an S in the sixth part number digit. A
module designated for a single fuse may be reconfig-
ured by the manufacturer or the user to accept two
fuses by simply removing the shorting clip. For appli-
cations intended for dual fusing, specify a D in the
sixth part number digit.
PA100
: Power interconnect assembly
For voltage select models. Designed for use with
either filtered or non-filtered units, 6” wire leads
Conversion Clip for
Single Fuse
Applications
3
PA101: Plug only
PA102: Pins only for use with PA101
PA105
: Same as PA100 but with two wires for
units with no voltage selection
Interconnection Block
PA400: J Extender
Installation of the unfiltered versions of the P series
requires wiring of the IEC socket terminals to the
optional switch and the switch to the fuse holder.
Labor can be eliminated by ordering the module
with an interconnection block. This feature, desig-
nated by “BX” in the seventh and eighth digits, pre
wires the module so that only connection to the
equipment must be done during installation. The
interconnection block includes a plastic case to
prevent access to the internal connections.
Extends P Series height to fit J panel cutout
PA410: L Extender
Extends P Series width to fit L panel cutout
PA420: C Extender
Extends P Series height to fit C panel cutout
PA400
The dimensions of this alternative are the same as the
filtered versions.
J Series Extender
C & L Extenders can not be used with B Shields.
L Extender can not be used with shields
195
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
For email, phone or live chat, please go to
te.com/help
corcom.com
Catalog: 1654001
Issue Date: 06.2011
Corcom Product Guide
Versatile Power Entry Module with Small Footprint (continued)
P Series
Specifications
Electrical Schematics
H Model
Maximum leakage current each Line to Ground:
H & L Models
2 A
S & Z Models
LINE
LOAD
@ 120 VAC 60 Hz:
@ 250 VAC 50 Hz:
.25 mA
.50 mA
5 A
Hipot rating (one minute):
Line to Ground:
Line to Line:
2250 VDC
1450 VDC
Rated Voltage(max.):
250VAC
S Model
LINE
LOAD
Operating Voltages:
Selectable or Fixed
115/230 VAC
50/60 Hz
Operating Frequency:
Rated Current:
Non-Filtered – 10A
Filtered – 3, 6 or 10A
L Model
LINE
LOAD
Fuseholder:
Switch:
Accepts one or two fuses
.25 x 1.25”(not included)
or 5 x 20mm (not included)
DPST
10,000 operations at 51A max. inrush
Z Model
LINE
LOAD
Case Styles
Front View
PM
PE
PS
High Performance
Version Only
2.88 2.39
73.15 60.71
2.29
58.16
2.496
63.4
1.58
40.13
1.22
30.98
1.95
49.53
1.22
30.98
196
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
For email, phone or live chat, please go to
te.com/help
corcom.com
Catalog: 1654001
Issue Date: 06.2011
Corcom Product Guide
Versatile Power Entry Module with Small Footprint (continued)
P Series
Case Styles
(continued)
Extender Options
C Extender - FN260
J Extender - J Series
2.51
63.75
2.72
69.08
Bottom edge
Bottom edge
Standard Models - Side and Rear View
Non-Filtered
Filtered
3
2.29
58.16
2.13
54.10
.225
5.715
1.93
49.02
High Performance Models - Side and Rear View
PM
PE
2.39
60.71
2.17
55.12
1.12
28.45
3.93
99.82
1.23
31.24
4.42
112.27
197
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
For email, phone or live chat, please go to
te.com/help
corcom.com
Catalog: 1654001
Issue Date: 06.2011
Corcom Product Guide
Versatile Power Entry Module with Small Footprint (continued)
P Series
Case Styles (continued)
Shield Options
“A” Shield
“B” Shield
2.19
55.63
2.19
55.63
Note: Shields can only be used with filtered models. B shield may not be used with J or C extender
Recommended Panel Cutout
Cutout
PM
PE
“A”
2.496
63.40
“B”
.06
1.524
1.575
40.00
R
.135
3.43
Mounting Hole Diameter
Note: For snap-in applications, the “A” sides must have a .020 [.508] radius on the installation side.
Dimensions are for front mount applications. Rear mount dimensions should be determined based on customer’s application
parameters. Snap-in models allow for front mounting only. Not recommended for use in plastic panels.
Dimension “A”
Dimension “B”
+.008 - .000
+.008 - .000
Style
No Shield
Shielded
High Performance
Standard
High Performance
PM
PE
1.06 [26.92]
1.12 [28.45]
1.06 [26.92]
1.06 [26.92]
1.06 [26.92]
1.12 [28.45]
1.12 [28.45]
1.12 [28.45]
1.12 [28.45]
1.12 [28.45]
1.12 [28.45]
-
1.12 [28.45]
2.13 [54.10]
2.201 [55.91]*
2.201 [55.91]*
2.52 [64.01]
2.60 [66.04]
2.201 [55.91]*
2.201 [55.91]
1.15 [29.21]
2.201 [55.91]
PS
-
-
-
-
-
-
-
-
PSC
PSJ
PSL
*For panel thickness of 0.031 - 0.079 [0.787 - 2.01] only. Use 2.213 [56.21] for panel thickness of 0.083 - 0.114 [2.0 - 2.90]
198
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
For email, phone or live chat, please go to
te.com/help
corcom.com
Catalog: 1654001
Issue Date: 06.2011
Corcom Product Guide
Versatile Power Entry Module with Small Footprint (continued)
P Series
Performance Data
Typical Insertion Loss
Measured in closed 50 Ohm system
Common Mode / Asymmetrical (L-G)
Differential Mode / Symmetrical (L-L)
S Models
3A
6A
10A
db
db
db
100
100
100
90
80
70
60
50
40
30
20
10
90
80
70
60
50
40
30
20
10
90
80
70
60
50
40
30
20
10
0
0
0
0.1
1
10
30
0.1
1
10
30
0.1
1
10
30
Frequency in MHz
Frequency in MHz
Frequency in MHz
H Models
3
3A
6A
100
10A
100
db
db
db
100
90
80
70
60
50
40
30
20
10
90
80
70
60
50
40
30
20
10
90
80
70
60
50
40
30
20
10
0
0
0
0.1
1
10
30
0.1
1
10
30
0.1
1
10
30
Frequency in MHz
Frequency in MHz
Frequency in MHz
L Models
6A
10A
db
db
100
100
90
80
70
60
50
40
30
20
10
90
80
70
60
50
40
30
20
10
0
0
0.01
0.1
1
10
30
0.01
0.1
1
10
30
Frequency in MHz
Frequency in MHz
Z Models
6A
10A
db
db
100
100
90
80
70
60
50
40
30
20
10
90
80
70
60
50
40
30
20
10
0
0
0.01
0.1
1
10
30
0.01
0.1
1
10
30
Frequency in MHz
Frequency in MHz
199
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
For email, phone or live chat, please go to
te.com/help
corcom.com
Catalog: 1654001
Issue Date: 06.2011
Corcom Product Guide
Versatile Power Entry Module with Small Footprint (continued)
P Series
Minimum Insertion Loss
Measured in closed 50 Ohm system
Common Mode / Asymmetrical (Line to Ground)
Differential Mode / Symmetrical (Line to Line)
200
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
For email, phone or live chat, please go to
te.com/help
corcom.com
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明