MMIQ-0205HSM [MARKIMICROWAVE]
MMIC Double-Balanced I/Q Mixer;
| 型号： | MMIQ-0205HSM |
| 厂家： | 
Marki |
| 描述： | MMIC Double-Balanced I/Q Mixer |
| 文件： | 总9页 (文件大小：783K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MMIC Double-Balanced I/Q Mixer
Page 1
MMIQ-0205HSM
The MMIQ-0205HSM is a miniaturized, surface-mount multi-octave
1.75-5.0 GHz IQ mixer. It features matched double balanced mixers
connected with an integrated LO hybrid and RF power divider. It can
be used for either upconversion or downconversion. Applications
include communications or radar systems with advanced digital
modulation formats and phase modulated signals, test and
measurement, or electronic warfare. Image reject or single sideband
modulation with excellent suppression is possible with use of an
external IF quadrature (90°) hybrid. For a list of recommended LO
driver amps for all mixers and IQ mixers, see here.
Features
5mm QFN Surface-Mount Package
CAD Optimized for Superior Isolation, Spurious Response, and Image Rejection/Sideband Suppression
Broadband Performance
Excellent Unit-to-Unit Repeatability
Fully nonlinear software models available with Marki Circuit Models for Microwave Office
RoHS Compliant
Electrical Specifications - Specifications guaranteed from -55 to +100C, measured in a 50Ω system.
Parameter
LO
(GHz)
RF
(GHz)
IF
(GHz)
Min
Typ
Max
Diode Option
LO drive level (dBm)
Conversion Loss (dB)
DC-0.2
0.2-2.0
8.0
10.5
(Combined IF with Test Hybrid)
10.5
Image Rejection (dB)
See
Plots
(Combined IF with Test Hybrid)
I/Q Amplitude Balance (dB)
0.16
3
I/Q Quadrature Phase Balance
(Degrees)
Isolation (dB)
1.75-5.0
+14 to +20
DC-2.0
LO-RF
See
LO-IF
Plots
RF-IF
Input 1 dB Compression (dBm)
(Combined IF with Test Hybrid)
Input Two-Tone Intercept (dBm)
(Combined IF with Test Hybrid)
+12
+20
Part Number Options
Model Number
Description
MMIQ-0205HSM-2 1
EVAL-MMIQ-0205H
MMIQ-0205HXA
Surface Mount
Connectorized Evaluation Fixture
Connectorized Module
1 For port locations and I/O designations, refer to the drawing on page 3 of this document.
215 Vineyard Court, Morgan Hill, CA 95037 | Ph: 408.778.4200 | Fax 408.778.4300 | info@markimicrowave.com
Copyright © [2017, 2020] Marki Microwave, Inc. All Rights Reserved
MMIC Double-Balanced I/Q Mixer
Page 2
MMIQ-0205HSM
Figure 1a. I/Q Mixer Schematic
________________________________________________________________________________________________________________
Figure 1b. Image Reject Mixer Schematic
________________________________________________________________________________________________________________
215 Vineyard Court, Morgan Hill, CA 95037 | Ph: 408.778.4200 | Fax 408.778.4300 | info@markimicrowave.com
Copyright © [2017, 2020] Marki Microwave, Inc. All Rights Reserved
MMIC Double-Balanced I/Q Mixer
Page 3
MMIQ-0205HSM
PROJECTION
.038
[.98]
Pad #
1
2
Function
INCH
N/C
N/C
N/C
RF
[MM]
.193
3
[4.90]
4
.028
5
6
7
8
N/C
N/C
N/C
N/C
N/C
N/C
N/C
IF-Q
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
LO
.020
[.70]
I
I
[.50]
25 26 27 28 29 30 31 32
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
24
23
22
21
20
19
18
17
1
2
3
4
5
6
7
8
LO
LO
MMIQH
6132
XXYY
RF
RF
.193
[4.90]
.138
[3.50]
Ground Paddle
.012
[.30]
N/C
N/C
N/C
N/C
N/C
16 15 14 13 12 11 10
9
N/C
IF-I
Q
Q
.016
[.40]
N/C
N/C
N/C
.003
[.08]
Outline Drawing – 5mm QFN Package
Substrate material is Ceramic.
I/O Leads and Ground Paddle are 1.4+0.6 microns (55+24 micro-inches) Au over 1.3 microns (51 micro-inches) Ni.
All unconnected pads should be connected to PCB RF ground.
.028
.077
.096
.057
.028
.077
.028
.116
.096
.011 Typ .012 Typ
.031 Typ
QFN-Package Surface-Mount Landing Pattern
Click here for a DXF of the above layout.
Click here for leaded solder reflow. Click here for lead-free solder reflow
215 Vineyard Court, Morgan Hill, CA 95037 | Ph: 408.778.4200 | Fax 408.778.4300 | info@markimicrowave.com
Copyright © [2017, 2020] Marki Microwave, Inc. All Rights Reserved
MMIC Double-Balanced I/Q Mixer
Page 4
MMIQ-0205HSM
Typical Performance
Combined-IF Downconversion Loss: 60 MHz IF (dB)1-4
Combined-IF Downconversion Image Rejection: 60 MHz IF (dB)1-4
-4
-6
0
-5
RF in < LO
RF in > LO
-10
-15
-20
-25
-30
-35
-40
-45
-50
-8
-10
-12
-14
-16
-18
-20
-22
RF in < LO
RF in > LO
1
2
3
4
5
6
7
1
2
3
4
5
6
7
RF Frequency (GHz)
RF Frequency (GHz)
LO to IF Isolation (dB)
LO to RF Isolation (dB)
0
-10
-20
-30
-40
-50
-60
-70
-80
0
-10
-20
-30
-40
-50
-60
-70
-80
Port I
Port Q
1
2
3
4
5
6
7
1
2
3
4
5
6
7
LO Frequency (GHz)
LO Frequency (GHz)
I/Q Port Conversion Loss: 60 MHz IF (dB)1-4
Combined-IF Downconversion Loss vs. LO Power: 60 MHz IF (dB)1-4
-7
-9
-4
-6
-11
-13
-15
-17
-19
-21
-23
-25
-8
-10
-12
-14
-16
-18
-20
-22
+17 dBm
+16 dBm
+15 dBm
+14 dBm
+13 dBm
Port I
Port Q
1
2
3
4
5
6
7
1
2
3
4
5
6
7
RF Frequency (GHz)
RF Frequency (GHz)
Combined-IF Upconversion Loss: 60 MHz IF (dB)1-4
Combined-IF Upconversion Sideband Suppression: 60 MHz IF (dB)1-4
-4
-6
0
-5
RF out < LO
RF out > LO
-10
-15
-20
-25
-30
-35
-40
-45
-50
-8
-10
-12
-14
-16
-18
-20
-22
RF out < LO
RF out > LO
1
2
3
4
5
6
7
1
2
3
4
5
6
7
RF Frequency (GHz)
RF Frequency (GHz)
215 Vineyard Court, Morgan Hill, CA 95037 | Ph: 408.778.4200 | Fax 408.778.4300 | info@markimicrowave.com
Copyright © [2017, 2020] Marki Microwave, Inc. All Rights Reserved
MMIC Double-Balanced I/Q Mixer
Page 5
MMIQ-0205HSM
Typical Performance
Port "I" to Port "Q" IF Amplitude Match: 60 MHz IF (dB)
Port "I" to Port "Q" IF Quad. Phase Deviation: 60 MHz IF (Degrees)
3
2
-60
-70
1
-80
0
-90
-1
-2
-3
-100
-110
-120
1
1
0
0
2
3
4
5
6
7
7
3
3
1
1
1
1
2
3
4
5
6
7
7
7
7
RF Frequency (GHz)
RF Frequency (GHz)
Port "I" Conversion Loss vs. LO Power: 60 MHz IF (dB)1-4
Port "Q" Conversion Loss vs. LO Power: 60 MHz IF (dB)1-4
-7
-9
-7
-9
-11
-13
-15
-17
-19
-21
-23
-25
-11
-13
-15
-17
-19
-21
-23
-25
+17 dBm
+16 dBm
+15 dBm
+14 dBm
+13 dBm
+17 dBm
+16 dBm
+15 dBm
+14 dBm
+13 dBm
2
3
4
5
6
2
3
4
5
6
RF Frequency (GHz)
RF Frequency (GHz)
High Side LO Port "I" Downconversion Loss (dB)1-4
High Side LO Relative IF Response (dB): 2 GHz RF
0
-2
-7
-9
-11
-13
-15
-17
-19
-21
-23
-25
-4
60 MHz IF
-6
500 MHz IF
1000 MHz IF
1500 MHz IF
2000 MHz IF
2500 MHz IF
-8
-10
0.5
1
1.5
2
2.5
2
3
4
5
6
IF Frequency (GHz)
RF Frequency (GHz)
Low Side LO Port "I" Downconversion Loss (dB)1-4
Low Side LO Relative IF Response (dB): 5 GHz RF
0
-2
-7
-9
-11
-13
-15
-17
-19
-21
-23
-25
-4
60 MHz IF
-6
500 MHz IF
1000 MHz IF
1500 MHz IF
2000 MHz IF
2500 MHz IF
-8
-10
0.5
1
1.5
2
2.5
2
3
4
5
6
IF Frequency (GHz)
RF Frequency (GHz)
215 Vineyard Court, Morgan Hill, CA 95037 | Ph: 408.778.4200 | Fax 408.778.4300 | info@markimicrowave.com
Copyright © [2017, 2020] Marki Microwave, Inc. All Rights Reserved
MMIC Double-Balanced I/Q Mixer
Page 6
MMIQ-0205HSM
Typical Performance
Output IP3: 60 MHz Combined IF (dBm)
Input IP3: 60 MHz Combined IF (dBm)
35
30
25
20
15
10
5
35
30
25
20
15
10
5
0
0
-5
-5
1
2
3
4
5
6
7
1
2
3
4
5
6
7
7
3
RF Frequency (GHz)
RF Frequency (GHz)
Conv. Comp. with a +10 dBm RF Input: 60 MHz Combined IF (dB)1-4
Conv. Comp. with +13 dBm RF Input: 60 MHz Combined IF (dB)1-4
5
4
5
4
3
3
2
2
1
1
0
0
-1
-2
-3
-4
-5
-1
-2
-3
-4
-5
1
1
1
2
2
2
3
4
5
5
5
6
6
6
7
1
0
1
2
0.5
2
3
4
5
2
5
6
2.5
6
RF Frequency (GHz)
RF Frequency (GHz)
RF to IF Isolation (dB)
IF Return Loss (dB)
0
-10
-20
-30
-40
-50
-60
-70
-80
0
-5
-10
-15
-20
-25
-30
2 GHz RF
5 GHz RF
Port I
Port Q
1
1.5
3
4
7
IF Frequency (GHz)
RF Frequency (GHz)
LO Return Loss (dB)
RF Return Loss (dB)
0
-5
0
-5
-10
-15
-20
-25
-10
-15
-20
-25
3
4
7
3
4
7
RF Frequency (GHz)
LO Frequency (GHz)
215 Vineyard Court, Morgan Hill, CA 95037 | Ph: 408.778.4200 | Fax 408.778.4300 | info@markimicrowave.com
Copyright © [2017, 2020] Marki Microwave, Inc. All Rights Reserved
MMIC Double-Balanced I/Q Mixer
Page 7
MMIQ-0205HSM
Typical Performance
2xLO Harmonic to RF Isolation (dB)
2xLO Harmonic to IF Isolation (dB)
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
1.5
1.5
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
6
6
1.5
1.5
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
6
6
LO Output Frequency (GHz)
LO Output Frequency (GHz)
3xLO Harmonic to RF Isolation (dB)
3xLO Harmonic to IF Isolation (dB)
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
2
2.5
3
3.5
4
4.5
5
5.5
2
2.5
3
3.5
4
4.5
5
5.5
LO Output Frequency (GHz)
LO Output Frequency (GHz)
2RF x 2LO Spurious Suppression (dBc) -10 dBm RF Input
2IF x 1LO Spurious Suppression (dBc) -10 dBm IF Input
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
-110
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
-110
2
2.5
3
3.5
4
4.5
5
5.5
2
2.5
3
3.5
4
4.5
5
5.5
RF Input Frequency (GHz)
RF Output Frequency (GHz)
215 Vineyard Court, Morgan Hill, CA 95037 | Ph: 408.778.4200 | Fax 408.778.4300 | info@markimicrowave.com
Copyright © [2017, 2020] Marki Microwave, Inc. All Rights Reserved
MMIC Double-Balanced I/Q Mixer
MMIQ-0205HSM
Page 8
Downconversion Spurious Suppression
Spurious data is taken by selecting RF and LO frequencies (+mLO+nRF) within the RF/LO bands, to create a spurious
output within the IF band. The mixer is swept across the full spurious band and the mean is calculated. The numbers
shown in the table below are for a -10 dBm RF input. Spurious suppression is scaled for different RF power levels by (n-
1), where “n” is the RF spur order. For example, the 2RFx2LO spur is 83 dBc for a -10 dBm input, so a -20 dBm RF
input creates a spur that is (2-1) x (-10 dB) dB lower, or 93 dBc.
Typical Downconversion Spurious Suppression (dBc) 4
-10 dBm RF
0xLO
1xLO
Reference
63
2xLO
3xLO
4xLO
55
5xLO
18
Input
1xRF
23
42
15
2xRF
3xRF
4xRF
5xRF
91
83
64
78
67
92
76
88
68
94
68
142
155
110
118
134
109
121
119
129
103
115
126
Upconversion Spurious Suppression
Spurious data is taken by mixing an input within the IF band, with LO frequencies (+mLO+nIF), to create a spurious
output within the RF output band. The mixer is swept across the full spurious output band and the mean is
calculated. The numbers shown in the table below are for a -10 dBm IF input. Spurious suppression is scaled for
different IF input power levels by (n-1), where “n” is the IF spur order. For example, the 2IFx1LO spur is typically 78 dBc
for the A configuration for a -10 dBm input, so a -20 dBm IF input creates a spur that is (2-1) x (-10 dB) dB lower, or 88
dBc.
Typical Upconversion Spurious Suppression (dBc) 4
-10 dBm IF
0xLO
1xLO
Reference
78
2xLO
3xLO
4xLO
51
5xLO
33
Input
1xIF
23
39
9
2xIF
3xIF
4xIF
5xIF
59
59
84
59
81
92
58
84
54
84
60
107
135
124
97
120
106
101
123
120
103
103
127
215 Vineyard Court, Morgan Hill, CA 95037 | Ph: 408.778.4200 | Fax 408.778.4300 | info@markimicrowave.com
Copyright © [2017, 2020] Marki Microwave, Inc. All Rights Reserved
MMIC Double-Balanced I/Q Mixer
Page 9
MMIQ-0205HSM
Port
Description
DC Interface Schematic
LO
LO
The LO port is DC open and AC matched to 50 Ohms from 1.75 to 5
GHz. Blocking capacitor is optional.
RF
I/Q
RF
I/Q
The RF port is DC short to ground and AC matched to 50 Ohms from
1.75 to 5 GHz. Blocking capacitor is optional.
The I/Q ports are DC coupled to the diodes. Blocking capacitor is
optional.
Absolute Maximum Ratings
Parameter
Maximum Rating
30 mA
RF DC Current
LO DC Current
IF DC Current1
N/A
30 mA
RF Power Handling (RF+LO)
+26 dBm at +25°C, derated
linearly to +23 dBm at +100°C
Operating Temperature
Storage Temperature
-55ºC to +100ºC
-65ºC to +125ºC
1Application of DC current has been known to damage mixer diodes. Any application of DC current >30 mA could cause field damage and void
the warranty.
DATA SHEET NOTES:
1. Mixer Conversion Loss, Rejection, Sideband Suppression, and IP3 plot IF frequency is 60 MHz.
2. Mixer Noise Figure typically measures within 0.5 dB of conversion loss for IF frequencies greater than 5 MHz.
3. Conversion Loss typically degrades less than 0.5 dB at +100°C and improves less than 0.5 dB at -55°C.
4. Unless otherwise specified H diode data taken with +16 dBm LO drive
5. Specifications are subject to change without notice. Contact Marki Microwave for the most recent specifications and data sheets.
6. Catalog mixer circuits are continually improved. Configuration control requires custom mixer model numbers and specifications.
Marki Microwave reserves the right to make changes to the product(s) or information contained herein without notice. Marki Microwave makes no
warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does Marki Microwave assume any
liability whatsoever arising out of the use or application of any product.
© Marki Microwave, Inc.
215 Vineyard Court, Morgan Hill, CA 95037 | Ph: 408.778.4200 | Fax 408.778.4300 | info@markimicrowave.com
Copyright © [2017, 2020] Marki Microwave, Inc. All Rights Reserved
相关型号：
©2020 ICPDF网 联系我们和版权申明