3605175 [MARL]

Single Color LED,;


型号：	3605175
厂家：	MARL INTERNATIONAL LIMITED
描述：	Single Color LED, 光电
文件：	总4页 (文件大小：369K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

514 RS series

features

• Ø12.7mm mounting

• Robust bright nickel plated brass housing

• Raised profile styling with a colour diffused lens

• Sealed to IP67

• Suitable for high vibration applications

• Internal reverse protection diode fitted as standard in all voltage models

• Pack Quantity = 10 Pieces

specifications

Typical characteristics (Ta = 25°C)

Current Luminous

Wave

Length

(nm)

Operating

Temp.

(°C)

Storage

Temp.

(°C)

RS Part

Number

Marl Part

Number

Voltage

Vac/dc

De-rating

Graphs

Colour

Intensity

(mcd)

(mA)

3605311

3605096

3605147

3605226

3605276

3605333

3605119

3605153

3605197

3605282

3605175

3605305

3605349

3605125

3605169

3605204

3605248

3605298

514-102-04

514-102-21

514-102-22

514-102-75

514-102-76

514-105-04

514-105-21

514-105-22

514-105-72

514-105-76

514-111-22

514-111-76

514-114-04

514-114-21

514-114-22

514-114-72

514-114-75

514-114-76

Red

1.85^ Vdc

12 Vdc

24 Vdc

110 Vac

230 Vac

2^ Vdc

500

660

625

590

565

-40 - +85

Red

12 Vdc

24 Vdc

24 Vac

230 Vac

24 Vdc

230 Vac

2.2^ Vdc

12 Vdc

24 Vdc

24 Vac

110 Vac

230 Vac

Red

Yellow

Green

^ = Voltage for 20mA product is Vf at 20mA, not Vopr

- Products must be de-rated according to the de-rating information. Each de-rating graph refers to

specific LEDs. Please refer to graphs on page 3.

- Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.

providing information, which must not be copied or released to

a third party without prior written consent from marl

international limited. the information provided does not constitute part of any order or contract and should not be regarded as a

representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl

international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.

BS EN ISO 9001:2008

approved manufacturer

marl international limited - dsn 514 RS - version 2013-09-24-173347

page 1 of 4

514 RS series

technical data

+0.1

12.70

11.50

Mounting Hole

Anode termination indicated by red sleeve.

Mounting hole to be clean and burr free.

Dimensions in mm (typical)

Not to scale

housing material

push on connectors

Brass to BS 2874 CZ121, Nickel plated to BS 1224

Viton

Body

Nut

Panel Seal

Brass to BS 2874 CZ108. Copper flash base, silver flash finish

Termination

Lens

925-000-00 is brass tin plated - for use

with 514 series lamps

PC5430 Resin

Encapsulation

Lock Washer

Header

Zinc Plated Steel

Dimensions in mm (typical). Not to scale.

technical characteristics

Max. Power

Series

Dissipation

Max. Reverse

Voltage

Nut Mounting

Torque

Min. Mounting

Centres

Max. Panel

Thickness

Panel Cutout

514

1000

3*/1000^

12.7

1.0

19.5

1.5 - 8.0

units

Vdc

* = Current version

^ = Voltage version

optional flying lead terminators

Order Code

Suffix

Supply

Voltage

Wire

No/Diameter

of Conductor

Diameter

Insulation

Comments

Colour

Length

DC products

AC products

DC products

AC products

Red-anode/ Black-cathode

Brown-live/ Blue-neutral

Red-anode/ Black-cathode

Brown-live/ Blue-neutral

150mm

1000mm

Customised

lengths

19/0.15mm

1.2mm

available

providing information, which must not be copied or released to third party without prior written consent from marl

international limited. the information provided does not constitute part of any order or contract and should not be regarded as a

representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl

international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.

BS EN ISO 9001:2008

approved manufacturer

marl international limited - dsn 514 RS - version 2013-09-24-173347

page 2 of 4

514 RS series

de-rating information

Derating Graph B

Derating Graph C

0.0

20.0

40.0

60.0

80.0 100.0

0.0

20.0

40.0

60.0

80.0 100.0

Ambient Temperature Ta (°C)

also available

Part numbers also available in the 514 series:

Part

Voltage

Vopr

Colour

Number

514-102-20

514-102-23

514-102-25

514-102-72

514-105-23

514-105-25

514-105-55-15

514-105-72-19

514-105-75

514-111-04

514-111-21

514-111-23

514-111-72

514-111-72-19

514-111-75

514-111-75-19

514-114-23

514-114-55-15

514-501-04

Red

Yellow

Green

Red

5/6 Vdc

28 Vdc

110 Vdc

24 Vac 50 Hz

28 Vdc

110 Vdc

130 Vdc

24 Vac 50 Hz

110 Vac 50 Hz

20 mA dc

12 Vdc

28 Vdc

24 Vac 50 Hz

110 Vac 50 Hz

28 Vdc

130 Vdc

20 mA dc

The products listed here illustrate all of the options available to order. These products may have custom modifications that

alter their operation beyond the generic information contained within this datasheet. Please contact sales for further

information.

RP = Reverse Polarity

providing information, which must not be copied or released to

a third party without prior written consent from marl

international limited. the information provided does not constitute part of any order or contract and should not be regarded as a

representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl

international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.

BS EN ISO 9001:2008

approved manufacturer

marl international limited - dsn 514 RS - version 2013-09-24-173347

page 3 of 4

514 RS series

Electro-Static Discharge (ESD)

design considerations

Build up of electro-static discharge occurs in many situations involving people moving and handling products. The range of

possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in many individual

situations. When an operator charged up to these levels handles a static sensitive device, there is a very probable likelihood

that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and

assembly of these products. Although LEDs were never considered to be static sensitive devices, changes in manufacturing

technology and materials used to produce higher intensity products over a large range of the wavelength spectrum have

changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and

despatch. Marl recommend all users of LED based products follow the guidelines of BS 100015.

Power De-Rating

The forward voltage/ current value of an LED is dependant upon the ambient temperature of the environment in which it is

operated. Therefore, care must be taken to operate the LED at the correct voltage/ current values, depending upon the

ambient temperature. Consequently, a recommendation regarding operating voltages and currents is given in order to address

these temperature effects. This recommendation is termed ‘de-rating’. It is usual for forward voltages and currents to be

specified for ambient temperature of 25°C. However, because the values of these qualities vary with temperature, please refer

to the de-rating graphs for correct operation. Marl accept no liability for any product that is operated higher than the stated

voltage.

providing information, which must not be copied or released to

a third party without prior written consent from marl

international limited. the information provided does not constitute part of any order or contract and should not be regarded as a

representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl

international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.

BS EN ISO 9001:2008

approved manufacturer

marl international limited - dsn 514 RS - version 2013-09-24-173347

page 4 of 4

相关型号：