502-997-22 [MARL]
PROFESSIONAL LED INDICATORS Ø 8.1mm Mounting; 专业LED指示灯Ø 8.1毫米安装型号: | 502-997-22 |
厂家: | MARL INTERNATIONAL LIMITED |
描述: | PROFESSIONAL LED INDICATORS Ø 8.1mm Mounting |
文件: | 总3页 (文件大小:253K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PROFESSIONAL LED INDICATORS Ø 8.1mm Mounting
FEATURES
l
l
l
l
l
Nickel plated brass housing
502 SERIES
PACK QUANTITY = 10 PIECES
Sealed to IP67
Water clear lens for good on/off contrast ratio
Internally potted for use in high vibration applications
Internal reverse protection diode fitted as standard in all
voltage models.
l
Wide viewing angle
SPECIFICATION
Ordering Information & Typical Technical Characteristics (Ta = 25°C)
Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.
PART NUMBER
COLOUR
LENS
VOLTAGE CURRENT LUMINOUS
DC (Vdc)
Vopr
WAVE
LENGTH
OPERATING
TEMP
Topr
STORAGE
TEMP
Tstg
DC (mA)
lopr
INTENSITY
lv@20mA (mcd) λp (nm)
HIGH INTENSITY
502-501-21
502-521-21
502-532-21
502-930-21
502-997-21
502-501-23
502-521-23
502-532-23
502-930-23
502-997-23
UNITS
Red
Water Clear
Water Clear
Water Clear
Water Clear
Water Clear
Water Clear
Water Clear
Water Clear
Water Clear
Water Clear
12
20
20
20
20
20
20
20
20
20
20
mA
11000
16000
23000
7000
643
591
527
470
-40 ~ +95^
-40 ~ +95^
-40 ~ +95^
-40 ~ +95^
-40 ~ +100
-40 ~ +100
-40 ~ +100
-40 ~ +100
-40 ~ +100
-40 ~ +100
-40 ~ +100
-40 ~ +100
-40 ~ +100
-40 ~ +100
°C
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yellow
Green
Blue
12
12
12
Cool White
Red
12
14000
11000
16000
23000
7000
*see below -40 ~ +95^
24-28
24-28
24-28
24-28
24-28
Vdc
643
591
527
470
-40 ~ +95^
-40 ~ +95^
-40 ~ +95^
-40 ~ +95^
Yellow
Green
Blue
Cool White
14000
mcd
*see below -40 ~ +95^
nm °C
997F-C *Typical emission colour cool white
Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs
within a batch.
x
y
0.245 0.361 0.356
0.229 0.385 0.351
0.264
0.220
Other voltages AC/DC available. Please contact our Technical Sales.
^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Refer to page 3.
How to Order:
website: www.marl.co.uk email: sales@marl.co.uk
•
Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155
•
•
•
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
BS EN ISO 9001:2000
Approved Manufacturer
Page 1 of 3
© MARL INTERNATIONAL LTD 2008 : DS 014/08 Issue 2
SAMPLES AVAILABLE
502 Series
+0.1
23.3
6.0
Ø8.10
7.8
Mounting Hole
Dimensions in mm (Typical)
Not to scale
Anode termination indicated by red sleeve
Mounting hole to be clean and burr free.
MATERIALS
PUSH-ON CONNECTORS
Body
Bright Nickel Plated Brass
Bright Nickel Plated Brass
Viton
Nut
Panel Seal
Termination Tags
Lens
Silver Flash Coated Brass
Polycarbonate
Dimensions in mm (Typical)
Not to scale
925-000-00 is brass tin plated.
For use with 502 series lamps.
Encapsulation
Lock Washer
PC5430 resin
Spring Steel
TECHNICAL CHARACTERISTICS
SERIES
MAXIMUM
POWER
DISSIPATION
MAXIMUM
REVERSE
VOLTAGE
PANEL
CUTOUT
NUT
MOUNTING
TORQUE
MINIMUM
MOUNTING PANEL
MIN/MAX.
CENTRES
x,y = 14.5
mm
THICKNESS
502
700
mW
3* / 1000•
8.1
0.6
1.5-13.0
mm
UNITS
Vdc
mm
Nm
* = Current Version
• = Voltage Version
OPTIONAL FLYING LEAD TERMINATIONS
ORDER
CODE
SUFFIX
SUPPLY
VOLTAGE
WIRE
COLOUR
WIRE
LENGTH
NO/DIAMETER
OF
CONDUCTORS
DIAMETER
OVER
INSULATION
COMMENTS
15
15
19
19
DC Products
AC Products
DC Products
AC Products
Red-anode / Black-cathode 150mm
Brown-live / Blue-neutral 150mm
Red-anode / Black-cathode 1000mm
Brown-live / Blue-neutral 1000mm
Customised
lengths
available
19/0.15mm
1.2mm
website: www.marl.co.uk email: sales@marl.co.uk
•
Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155
•
•
•
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
BS EN ISO 9001:2000
Approved Manufacturer
Page 2 of 3
© MARL INTERNATIONAL LTD 2008 : DS 014/08 Issue 2
SAMPLES AVAILABLE
DERATING INFORMATION
501 & 521
532, 930 & 997
ALSO AVAILABLE
Part numbers also available in the 502 Series:
PART NO.
COLOUR VOLTAGE DC
(Vdc) Vopr
502-501-20
502-501-86-19
502-521-20
502-521-25
502-521-86-19
502-532-20
502-532-24
502-532-86
502-532-86-19
502-997-20
502-997-22
502-997-24
502-997-86
UNITS
Red
5/6 VDC
115 VAC
5/6 VDC
110 VDC
115 VAC
5/6 VDC
48 VDC
115 VAC
115 VAC
5/6 VDC
24 VDC
48 VDC
115 VAC
Red
Yellow
Yellow
Yellow
Green
Green
Green
Green
White
White
White
White
The products listed above illustrate all of the options available to order. These products may have custom modifications that alter
their operation beyond the generic information contained within this datasheet. Please contact sales for further information.
website: www.marl.co.uk email: sales@marl.co.uk
•
Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155
•
•
•
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
BS EN ISO 9001:2000
Approved Manufacturer
Page 3 of 3
© MARL INTERNATIONAL LTD 2008 : DS 014/08 Issue 2
SAMPLES AVAILABLE
相关型号:
©2020 ICPDF网 联系我们和版权申明