DS21602SN+ [MAXIM]
PLL Based Clock Driver, 21602 Series, 2 True Output(s), 0 Inverted Output(s), PDSO16, ROHS COMPLIANT, SOP-16;
| 型号： | DS21602SN+ |
| 厂家： | 
MAXIM INTEGRATED PRODUCTS |
| 描述： | PLL Based Clock Driver, 21602 Series, 2 True Output(s), 0 Inverted Output(s), PDSO16, ROHS COMPLIANT, SOP-16 时钟 |
| 文件： | 总13页 (文件大小：339K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DS21600/DS21602/DS21604
www.maxim-ic.com
GENERAL DESCRIPTION
FEATURES
The DS21600/DS21602/DS21604 are multiple-rate
clock adapters that convert between E-carrier and T-
carrier clocks rates. A T1 or E1 clock output,
CLKOUT1, is available, along with a higher multiple
rate clock output, CLKOUT2. CLKOUT1 and
CLKOUT2 are frequency locked to the clock input
CLKIN. The clock outputs, along with frame-sync
output, can be phase-aligned to a frame-sync input.
The devices are fully compatible with the LXP600A,
LXP602, and LXP604, and operate from either a 5V
or 3.3V supply. All operation modes include a
standard 8kHz output.
Cꢀ Direct Drop-In Replacement for LXP600ASE,
LXP602SE, and LXP604SE
Cꢀ Converts E-Carrier Clock Rates to T-Carrier
Clock Rates
Cꢀ Converts T-Carrier Clock Rates to E-Carrier
Clock Rates
Cꢀ 3.3V or 5V Supply
Cꢀ Low Jitter Output
Cꢀ Multiple Output Clocks Synchronized to Input
Clock
Cꢀ 8kHz Frequency-Locked Output for All Operation
Modes
Cꢀ No External Components Required
Cꢀ 16-Pin SO and 8-Pin DIP
Cꢀ Industrial Temperature Range: -40°C to +85°C
The DS21600/DS21602/DS21604 are available in
16-pin SO, and are rated for industrial temperatures.
ORDERING INFORMATION
PIN CONFIGURATION
PART
DS21600SN
DS21600N
DS21602SN
DS21602N
DS21604SN
DS21604N
TEMP RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
16 SO
TOP VIEW
8 DIP
16 SO
8 DIP
Dallas
Semiconductor
DS21600/2/4
16 SO
8 DIP
FREQUENCY CONVERSIONS (MHz)
SO
PART
CLKIN
1.544
2.048
1.544
2.048
1.544
4.096
CLKOUT1
2.048
CLKOUT2
6.144
DS21600
1.544
6.176
2.048
8.192
DS21602
DS21604
1.544
6.176
4.096
8.192
1.544
6.176
Note: Some revisions of this device may incorporate deviations from published specifications known as errata. Multiple revisions of any device
may be simultaneously available through various sales channels. For information about device errata, click here: www.maxim-ic.com/errata.
1 of 13
REV: 113004
DS21600/DS21602/DS21604 3.3V/5V Clock Rate Adapter
TABLE OF CONTENTS
1.
2.
PIN DESCRIPTION ......................................................................................................................3
PIN NAME CROSS-REFERENCE TO LXP60X ....................................................................................................3
FUNCTIONAL DESCRIPTION......................................................................................................4
1.1
2.1
2.2
MODE SELECT................................................................................................................................................4
FRAME SYNC INPUT........................................................................................................................................4
3.
OUTPUT JITTER..........................................................................................................................4
JITTER TRANSFER ..........................................................................................................................................5
OPERATING PARAMETERS .......................................................................................................7
3.1
4.
5.
6.
PACKAGE INFORMATION ........................................................................................................11
REVISION HISTORY..................................................................................................................13
LIST OF FIGURES
Figure 1-1. Block Diagram....................................................................................................................3
Figure 3-1. Nominal Jitter Transer for 2.048MHz to 1.544MHz Conversion..........................................5
Figure 3-2. Nominal Jitter Transfer for 1.544MHz to 2.048MHz Conversion.........................................6
Figure 4-1. DS21600/DS21602 High-to-Low Frequency Conversion Frame-Sync Alignment...............8
Figure 4-2. DS21604 High-To-Low Frequency Conversion Frame-Sync Alignment..............................9
Figure 4-3. DS21600 Low-to-High Frequency Conversion Frame-Sync Alignment...............................9
Figure 4-4. DS21602 Low-to-High Frequency Conversion Frame-Sync Alignment.............................10
Figure 4-5. DS21604 Low-to-High Frequency Conversion Frame-Sync Alignment.............................10
LIST OF TABLES
Table 1-A. Pin Description....................................................................................................................3
Table 1-B. Pin Name Cross-Reference to LXP60x...............................................................................3
Table 2-A. Frequency Conversions (MHz)............................................................................................4
Table 3-A. Output Jitter Specifications..................................................................................................4
2 of 13
DS21600/DS21602/DS21604 3.3V/5V Clock Rate Adapter
1. PIN DESCRIPTION
Table 1-A. Pin Description
PIN
NAME
TYPE
FUNCTION
DIP
SO
1, 3, 6, 8, 10,
11, 13, 15
—
N.C.
—
No Connect
Synchronization Output. An 8kHz output that can be
synchronized to the clock outputs.
1
2
3
2
4
5
SYNCOUT
CLKOUT2
CLKIN
Output
Output
Input
Clock Output 2. T1 or E1 carrier clock output referenced to
CLKIN.
Clock Input. Reference Clock Input. CLKOUT1 and CLKOUT2
will be referenced to this clock.
Clock Output 1. T1 or E1 carrier clock output referenced to
4
5
6
7
9
CLKOUT1
Vss
Output
Supply
Input
CLKIN.
Ground
12
SEL
Clock Mode Select. Conversion mode select.
Synchronization Input. Used to synchronize the clock outputs
and SYNCOUT to CLKIN and SYNCIN. SYNCIN should be tied
high or low when not in use.
7
8
14
16
SYNCIN
VDD
Input
Supply
Positive Supply, 3.3V or 5V ±5%
1.1 Pin Name Cross-Reference to LXP60X
Table 1-B. Pin Name Cross-Reference to LXP60x
DS21600/DS21602
/DS21604
SYNCOUT
CLKOUT2
CLKIN
LXP600ALXP602/
FUNCTION
LXP604
FSO
HFO
CLKI
CLKO
GND
SEL
Synchronization Pulse Output
Clock 2 Output
Clock Input
CLKOUT1
VSS
Clock 1 Output
Ground
SEL
Clock Mode Select
Synchronization Pulse Input
No Connect
SYNCIN
N.C.
FSI
N.C.
VDD
VCC
Positive Supply
Figure 1-1. Block Diagram
CLKOUT2
CLKOUT1
ANALOG
CLKIN
PLL
FEEDBACK
CIRCUIT
OUTPUT
DIVIDER
Dallas Semiconductor
DS21600/DS21602/DS21604
SEL
FRAME SYNC
GENERATOR
SYNCOUT
SYNCIN
3 of 13
DS21600/DS21602/DS21604 3.3V/5V Clock Rate Adapter
2. FUNCTIONAL DESCRIPTION
A clock input at CLKIN is converted to an alternate clock rate available on CLKOUT1. A higher multiple-rate clock
also is available on CLKOUT2. Additionally, an 8kHz clock locked to CLKIN is always available at the SYNCOUT
pin. The SEL pin controls clock-rate conversion selection.
2.1 Mode Select
The SEL pin is used to select the operating frequencies. Table 2-A shows the SEL state for the various operating
modes of the DS21600, DS21602, and DS21604.
Table 2-A. Frequency Conversions (MHz)
PART
SEL
CLKIN
1.544
2.048
1.544
2.048
1.544
4.096
CLKOUT1
CLKOUT2
6.144
0
2.048
DS21600
1
1.544
6.176
0
2.048
8.192
DS21602
DS21604
1
1.544
6.176
0
4.096
8.192
1
1.544
6.176
2.2 Frame-Sync Input
In all cases, CLKOUT1 and CLKOUT2 are frequency-locked to CLKIN. CLKOUT1, CLKOUT2, and SYNCOUT are
phased-locked to SYNCIN when SYNCIN is asserted. The signal applied to SYNCIN can be 8kHz or some integer
subrate such as 1kHz, 2kHz, or 4kHz. Phase synchronization occurs within a maximum of 50ms when SYNCIN is
8kHz.
3. OUTPUT JITTER
Table 3-A shows the output jitter specifications for 2.048MHz (or 4.096MHz) to 1.544MHz conversions (SEL = 1)
and 1.544MHz to 2.048MHz (or 4.096MHz) conversions (SEL = 0).
Table 3-A. Output Jitter Specifications
CLKIN
(MHz)
1.544
CLKOUT1
(MHz)
FREQUENCY
BAND
SPECIFICATION
VALUE
TYP
MAX
UNITS
20Hz–100kHz
18kHz–100kHz
No bandlimiting
10Hz–40kHz
8kHz–40kHz
G.823
G.823
1.500
0.200
0.050
0.025
0.025
0.018
0.012
0.010
0.005
0.006
0.035
0.025
0.020
0.010
0.012
UIP-P
UIP-P
UIP-P
UIP-P
UIP-P
2.048
TR62411
TR62411
TR62411
2.048 or
4.096
1.544
4 of 13
DS21600/DS21602/DS21604 3.3V/5V Clock Rate Adapter
3.1 Jitter Transfer
Figure 3-1 and Figure 3-2 show jitter transfer for 2.048MHz-to-1.544MHz conversions and vice versa.
Figure 3-1. Nominal Jitter Transfer for 2.048MHz-to-1.544MHz Conversion
2
1.8
1.6
1.4
1.2
1
0.8
0.6
0.4
0.2
0
0
10
20
30
40
50
60
70
80
JITTER FREQUENCY (kHz)
NOTE: THE TYPICAL PEAK JITTER GAIN OF THE DS21600/DS21602/DS21604 IS ABOUT 1.6 FOR CONVERSION FROM
T1 TO E1. THE TYPICAL PEAK-JITTER GAIN OF THE LEVEL ONE DEVICE IS ABOUT 1.1. HOWEVER, THE JITTER GAIN
FOR THE DS21600/DS21602/DS21604 PEAKS IN THE 4kHz TO 8kHz RANGE, WHEREAS THE PEAK JITTER GAIN FOR
THE LXP6XX DEVICES SPANS A GREATER FREQUENCY RANGE (20kHz TO 40kHz).
5 of 13
DS21600/DS21602/DS21604 3.3V/5V Clock Rate Adapter
Figure 3-2. Nominal Jitter Transfer for 1.544MHz-to-2.048MHz Conversion
2.00
1.80
1.60
1.40
1.20
1.00
0.80
0.60
0.40
0.20
0.00
0
5
10
15
20
25
30
35
40
JITTER FREQUENCY (kHz)
NOTE: THE TYPICAL PEAK JITTER GAIN OF THE DS21600/DS21602/DS21604 IS ABOUT 1.6 FOR CONVERSION
FROM T1 TO E1. THE TYPICAL PEAK-JITTER GAIN OF THE LEVEL ONE DEVICE IS ABOUT 1.1. HOWEVER, THE
JITTER GAIN FOR THE DS21600/DS21602/DS21604 PEAKS IN THE 4kHz TO 8kHz RANGE, WHEREAS THE PEAK
JITTER GAIN FOR THE LXP6XX DEVICES SPANS A GREATER FREQUENCY RANGE (20kHz TO 40kHz).
6 of 13
DS21600/DS21602/DS21604 3.3V/5V Clock Rate Adapter
-1.0V to +6.0V
4. OPERATING PARAMETERS
ABSOLUTE MAXIMUM RATINGS
Voltage Range on Any Pin Relative to Ground
Operating Temperature Range for DS21600SN, DS21602SN, DS21604SN
Storage Temperature Range
-40°C to +85°C
-55°C to +125°C
Soldering Temperature
See IPC/JEDEC J-STD-020
Specification
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications
is not implied. Exposure to absolute maximum rating conditions for extended periods can affect device reliability.
RECOMMENDED DC OPERATING CONDITIONS
(TA = -40°C to +85°C)
PARAMETER
SYMBOL
VIH
CONDITIONS
MIN
2.0
TYP
MAX
5.5
UNITS
Logic 1
Logic 0
V
V
VIL
-0.3
+0.8
3.465
5.25
3.3V
5V
3.135
4.75
3.3
5
Supply Voltage
VDD
V
DC CHARACTERISTICS
(VDD = 3.3V/5V M 5%, TA = -40°C to +85°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
14
UNITS
mA
ꢀA
Supply Current
IDD
IIL
(Note 1)
(Note 2)
Input Leakage
-1.0
+1.0
1.0
Output Leakage
ILO
IOH
IOL
ꢀA
Output Current (2.4V)
Output Current (0.4V)
-1.0
mA
mA
+4.0
Note 1: 100pF load on all outputs.
Note 2: 0V < VIN < VDD
.
7 of 13
DS21600/DS21602/DS21604 3.3V/5V Clock Rate Adapter
AC TIMING
(Figure 4-1, Figure 4-2, Figure 4-3, Figure 4-4, and Figure 4-5)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
Capture Range on CLKIN
(Note 3)
±10,000
ppm
Lock Range on CLKIN
CLKIN Duty Cycle
(Note 3)
(Note 3)
±10,000
35
ppm
%
65
SYNCIN Setup to CLKIN Rising
tSU
tHI
46
ns
SYNCIN Hold After CLKIN Rising
30
ns
CLKIN
period
SYNCIN Pulse Width
tPW
76
ns
ns
3.3V
5V
-15
-15
49
0
0
+15
CLKOUT1 Delay from CLKIN Rising
tD
+31
51
CLKOUT1 Duty Cycle
CD
tDF
%
SYNCOUT Delay from CLKOUT2
-5
30
ns
CLKOUT
1 period
SYNCOUT Pulse Width
tSPW
tDH
tRF
ns
ns
ns
ns
CLKOUT1 Delay from CLKOUT2
-15
0
+15
Rising
Rise/Fall Time on CLKIN, SYNCIN
(Note 3)
3.3V
5V
60
40
60
40
3.3V
5V
Rise/Fall Time on CLKOUT,
tRF
SYNCOUT, CLKOUT2 (Note 4)
Note 3: Guaranteed by design.
Note 4: 100pF load on CLKOUT, SYNCOUT, CLKOUT.
Figure 4-1. DS21600/DS21602 High-to-Low Frequency Conversion Frame-Sync
Alignment
CLKIN
tSU
tHI
SYNCIN
tPW
CLKOUT1
tD
tDH
SYNCOUT
tSPW
tDF
CLKOUT2
8 of 13
DS21600/DS21602/DS21604 3.3V/5V Clock Rate Adapter
Figure 4-2. DS21604 High-To-Low Frequency Conversion Frame-Sync Alignment
CLKIN
tSU
tHI
SYNCIN
tPW
CLKOUT1
tD
tDH
SYNCOUT
tSPW
tDF
CLKOUT2
Figure 4-3. DS21600 Low-to-High Frequency Conversion Frame-Sync Alignment
CLKIN
(1.544MHz)
tSU
tHI
tPW
tD
SYNCIN
CLKOUT1
tDH
(2.048MHz)
tSPW
SYNCOUT
tDF
CLKOUT2
9 of 13
DS21600/DS21602/DS21604 3.3V/5V Clock Rate Adapter
Figure 4-4. DS21602 Low-to-High Frequency Conversion Frame-Sync Alignment
CLKIN
(1.544MHz)
tSU
tHI
SYNCIN
tPW
tD
CLKOUT1
(2.048MHz)
tDH
tSP
SYNCOUT
tDF
CLKOUT2
Figure 4-5. DS21604 Low-to-High Frequency Conversion Frame-Sync Alignment
CLKIN
(1.544MHz)
tSU
tHI
SYNCIN
tPW
tDH
CLKOUT1
(4.096MHz)
tD
TSPW
SYNCOUT
tDF
CLKOUT2
(8.192MHz
)
10 of 13
DS21600/DS21602/DS21604 3.3V/5V Clock Rate Adapter
5. PACKAGE INFORMATION
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to
www.maxim-ic.com/DallasPackInfo.)
16-Pin SO, 0.300" Body
11 of 13
DS21600/DS21602/DS21604 3.3V/5V Clock Rate Adapter
8-PIN DIP (300 mil)
12 of 13
DS21600/DS21602/DS21604 3.3V/5V Clock Rate Adapter
6. REVISION HISTORY
REVISION
DESCRIPTION
082100
083100
090100
011101
092801
032002
032803
Preliminary release
Added package specifications
Correct operating voltage range
Added mechanical drawing for DIP package
Added jitter specifications and pin list for all packages; added timing diagrams
Updated jitter specifications
Added 3.3V operation specifications
Added the spec for soldering temperature in the Absolute Maximum Ratings
113004
section.
13 of 13
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明