MAX11213EVKIT+ [MAXIM]
On-Board Isolated Power Supplies Rejecting Power Line Noise;型号: | MAX11213EVKIT+ |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | On-Board Isolated Power Supplies Rejecting Power Line Noise |
文件: | 总19页 (文件大小:1137K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
19-5509; Rev 0; 9/10
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
General Description
Features
S Windows XP-, Windows Vista-, and Windows
TheMAX11200,MAX11206,MAX11209,MAX11210,
and MAX11213 evaluation kits (EV kits) consist of
one MAX11200, MAX11206, MAX11209, MAX11210,
or MAX11213 evaluation board and software. The EV
kits are fully assembled and tested circuit boards that
evaluate the MAX11200 family of ultra-low-power, high-
resolution, serial output ADCs.
7-Compatible Software
S USB-PC Connection (Cable Included)
S USB Powered (No External Power Supply
Required)
S On-Board Isolated Power Supplies Rejecting
Power Line Noise
M
M
The EV kits include Windows XP -, Windows Vista -,
M
S On-Board Optocouplers Isolating ADC from Other
and Windows 7-compatible software that provides a
Circuitry
graphical user interface (GUI) for exercising the features
of the MAX11200 family of data converters. The EV kits are
connected to a PC through a USB A-to-B cable.
S Real-Time Data Acquisition through USB
S Proven PCB Layout
Selector Guide
Ordering Information
PART
TYPE
EV Kit
EV Kit
EV Kit
EV Kit
EV Kit
PROGRAMMABLE
PART
RESOLUTION
GAIN
MAX11200EVKIT+
MAX11206EVKIT+
MAX11209EVKIT+
MAX11210EVKIT+
MAX11213EVKIT+
MAX11200EEE+
MAX11206EEE+
MAX11209EEE+
MAX11210EEE+
MAX11213EEE+
24
20
18
24
16
N/A
1–128
1–128
1–16
+Denotes lead(Pb)-free and RoHS compliant.
1–128
Component List
DESIGNATION QTY
DESCRIPTION
DESIGNATION QTY
DESCRIPTION
10FF Q20%, 6.3V X5R ceramic
capacitor (0603)
Murata GRM188R60J106M
1FF Q10%, 16V X7R ceramic
capacitors (0603)
Murata GRM188R71C105K
C21, C24, C25,
C1
C2
1
1
4
C28
0.01FF Q10%, 16V X7R ceramic
capacitor (0603)
Murata GRM188R71C 103K
18pF Q5%, 50V C0G ceramic
capacitors (0603)
Murata GRM1885C1H180J
C22, C23, C26,
4
C27
Not installed, ceramic capacitors
(0805)
C3–C10, C13,
C14, C15, C17,
C18, C33
0.1FF Q10%, 25V X7R ceramic
capacitors (0603)
Murata GRM188R71E104K
C34–C37
D1–D4
0
4
14
2
30V, 1A Schottky diodes
(SOD123)
1000pF Q10%, 50V X7R ceramic
capacitors (0603)
Murata GRM188R71H102K
C11, C12
D5
D6
D7
1
1
1
15V zener diode (DO35)
Green LED (0603)
Red LED (0603)
4.7FF Q10%, 10V X5R ceramic
capacitors (0805)
Murata GRM219R61A475K
C16, C19, C20,
C29–C32
7
120 at 100MHz, 200mA ferrite
bead (0603)
FB1
1
Murata BLM18RK121SN1
Windows, Windows XP, and Windows Vista are registered
trademarks of Microsoft Corp.
_______________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Component List (continued)
DESIGNATION QTY
DESCRIPTION
12-position terminal block
BNC PC-mount connector
DESIGNATION QTY
DESCRIPTION
J1
J2
1
1
U4, U5, U6
3
High-speed optocouplers (8 DIP)
H-bridge driver (8 SO-EP*)
Maxim MAX256ASA+
U7
1
USB type-B right-angle
receptacle
J3
J4
1
0
Linear regulator (8 SO)
Maxim MAX1659ESA+
U8
U9
1
1
Not installed, 10-pin (2 x 5)
header
Linear regulator (8 SO)
Maxim MAX1658ESA+
JU1
JU2–JU5
JU6, JU7, JU10
JU8, JU9
R1
1
4
3
2
1
3
4
1
2
2
1
1
1
1
2
4
4-pin header
3-pin headers
USB peripheral controller
(24 TQFN-EP*)
Maxim MAX3420EETG+
2-pin headers
U10
1
12-pin (2 x 6) headers
100I Q5% resistor (0603)
180I Q5% resistors (0603)
330I Q5% resistors (0603)
47kI Q5% resistor (0603)
360I Q5% resistors (0603)
33.2I Q1% resistors (0603)
10kI Q5% resistor (0603)
10.5kI Q1% resistor (0603)
6.49kI Q1% resistor (0603)
100kI Q5% resistor (0603)
10kI Q1% resistors (0603)
0I Q5% resistors (0603)
Microcontroller (68 QFN-EP*)
Maxim MAXQ2000-RAX+
U11
U12
1
1
R2, R3, R4
R5–R8
2.5V LDO regulator (5 SC70)
Maxim MAX8511EXK25+
R9
R10, R14
R11, R12
R13
Adjustable LDO regulator
(6 SOT23)
Maxim MAX8880EUT+
U13
Y1
1
1
1
1
1
R15
2.4576MHz clock oscillator
Hong Kong X’tals
C4L24576NSMI02601-0
R16
R17
R18, R19
R20–R23
2.048MHz clock oscillator
Hong Kong X’tals
C4L20480NSMI02601-0
Y2
198FH, 3W, 1:1:2.6:2.6-turn
400kHz transformer
HALO Electronics TGM-H281NF
T1
1
12MHz crystal
Hong Kong X’tals
SSM12000N1HK188F0-0
Y3
TP1, TP3
TP2, TP4
TP5–TP13
2
2
9
Red multipurpose test points
Black multipurpose test points
Orange miniature test points
20MHz crystal
Hong Kong X’tals
SSM20000NSMI02801-0
Y4
See the EV Kit-Specific
Component List
U1
1
—
—
1
USB high-speed A-to-B cable
Shunts
10
4:1 analog multiplexer
(16 TSSOP)
Maxim MAX4782EUE+
U2
1
PCB: MAX11200/11206/11209/1
1210/11213 EVALUATION KIT+
—
1
*EP = Exposed pad.
High-precision, low-noise voltage
reference (8 FMAXM)
U3
1
Maxim MAX6126A30+
µMAX is a registered trademark of Maxim Integrated Products,
Inc.
2
______________________________________________________________________________________
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
EV Kit-Specific Component List
PART
DESIGNATION
DESCRIPTION
24-bit single-channel ADC (16 QSOP)
Maxim MAX11200EEE+
MAX11200EVKIT+
20-bit single-channel ADC (16 QSOP)
Maxim MAX11206EEE+
MAX11206EVKIT+
MAX11209EVKIT+
MAX11210EVKIT+
MAX11213EVKIT+
18-bit single-channel ADC (16 QSOP)
Maxim MAX11209EEE+
U1
24-bit single-channel ADC (16 QSOP)
Maxim MAX11210EEE+
16-bit single-channel ADC (16 QSOP)
Maxim MAX11213EEE+
Component Suppliers
SUPPLIER
PHONE
WEBSITE
www.haloelectronics.com
www.hongkongcrystal.com
www.murata-northamerica.com
HALO Electronics, Inc.
650-903-3800
852-35112388
770-436-1300
Hong Kong X’tals Ltd.
Murata Electronics North America, Inc.
Note: Indicate that you are using the MAX11200, MAX11206, MAX11209, MAX11210, or MAX11213 when contacting these
component suppliers.
MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Files
FILE
INSTALL.EXE
DESCRIPTION
Installs the EV kit files on your computer
Application program
11200_06_09_10_13.EXE
UNINST.INI
Uninstalls the EV kit software
Procedure
Quick Start
Recommended Equipment
•ꢀ MAX11200,ꢀMAX11206,ꢀMAX11209,ꢀMAX11210,ꢀorꢀ
MAX11213 EV kit (USB A-to-B cable included)
The EV kits are fully assembled and tested. Follow
the steps below to verify board operation before
exercising the full features of the MAX11200 family of data
converters:
•ꢀ WindowsꢀXP,ꢀWindowsꢀVista,ꢀorꢀWindowsꢀ7ꢀPCꢀwithꢀ
1) Verify that all the jumpers are set in their default
positions (see Table 3).
a spare USB port
•ꢀ High-precisionꢀdigitalꢀvoltmeterꢀ(DVM)
2) Visit www.maxim-ic.com/evkitsoftware to down-
load the latest version of the EV kit software,
11200_06_09_10_13Rxx.ZIP.
Refer to the MAX11200/MAX11210, MAX11203/
MAX11213, MAX11206/MAX11207, and MAX11209/
MAX11211 IC data sheets while using this EV kit for
detailed descriptions of the device features.
3) Install the evaluation software on your computer
by running the INSTALL.EXE program. The pro-
gram files are copied and icons are created in the
Windows Start | Programs menu.
Note: In the following sections, software-related items
are identified by bolding. Text in bold refers to items
directly from the EV kit software. Text in bold and under-
lined refers to items from the Windows operating system.
4) Connect the USB cable from the PC to the EV kit
board.
_______________________________________________________________________________________
3
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
5) Verify that green LED D6 on the EV kit board
illuminates, indicating the isolated power supply is
good.
9) The software automatically configures the device
to perform a self-calibration and enables the use of
the self-calibration offset and self-calibration gain
values when computing the final offset and gain-
corrected data value (set the CTRL3 register to
0x18).
6) Verify that red LED D7 on the EV kit board
illuminates, indicating the microcontroller has
successfully finished the board self-test.
10) The EV kit software main window appears (Figure
2). Verify that Hardware: Connected is displayed
on the status bar at the bottom of the main window.
7) Start the EV kit software by opening its icon in the
Windows Start | Programs menu.
8) A Device Select window pops up. Select the device
variant installed on the EV kit board and press the
OK button (Figure 1).
11) Press the Start Conversion & Data Logging
button. The software switches to the Data Analysis
tab (Figure 3), displaying the scope of the sampled
data.
Figure 1. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Software (Device Select Window)
4
______________________________________________________________________________________
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Figure 2. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Software (Main Window)
_______________________________________________________________________________________
5
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Figure 3. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Software (Data Analysis Tab)
6
______________________________________________________________________________________
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
e. Press the Send button. The device performs
Calibration Notes
The user MUST perform at least one calibration (either
self-calibration and/or system calibration) before any
a system offset calibration with self-calibration
registers enabled.
3) The second step of the system calibration is to
measurement. Refer to the MAX11200/MAX11210,
perform a system gain calibration. The SOC register
MAX11203/MAX11213, MAX11206/MAX11207, and
must be enabled before a system gain calibration
MAX11209/MAX11211 IC data sheets for calibration
is performed.
details. The following calibration procedure details how
to use all the calibration registers in a measurement.
a. This is a conversion with the inputs held at
system full-scale reference. For the EV kit, one
option is to place the shunt on JU9 across pins
1-2 (AINP = REFP = 3.0V) and place the shunt
on JU8 across pins 3-4 (AINN = REFN = GND).
In the case of a user system, the user should
apply the target system full-scale reference to
the AINP and AINN inputs.
1) To perform a self-calibration (both offset and gain):
a. This is a conversion with internally shorted
inputs, which is done by the internal state
machine. No user manual action is required.
That is, JU9 and JU8 shunt positions can be
anywhere.
b. In the CAL1, CAL0 group box, select the
01 – Self Calibration radio button.
b. In the CAL1, CAL0 group box, select the
11 – System Gain Calibration radio button.
c. In the IMPD group box, select the
0 – Calibration/Conversion radio button.
c. In the IMPD group box, select the
0 – Calibration/Conversion radio button.
d. Press the Send button. The device performs a
d. In the CTRL3 register row, type 10 in the Write
Value edit box to enable the system offset
register and the self-calibration registers. Press
the Write button.
self-calibration.
2) To perform a system calibration, a system offset
calibration must be performed first:
a. This is a conversion with the inputs held at
system zero. For the EV kit, one option is to
place the shunt on JU9 across pins 7-8 (AINP =
GND) and place the shunt on JU8 across pins
7-8 (AINN = GND). In the case of a user system,
the user should apply the target system zero to
the AINN and AINP inputs.
e. Press the Send button. The device performs a
system gain calibration.
4) To enable the calibration coefficients:
a. In the CTRL3 register row, type 00 in the Write
Value edit box. Press the Write button. All the
self and system calibration gain and offset
values are used in the calculation of the
conversion result.
b. In the CAL1, CAL0 group box, select the
10 – System Offset Calibration radio button.
5) Continue to perform a measurement by connecting
AINP and AINN to the measurement target.
c. In the IMPD group box, select the
0 – Calibration/Conversion radio button.
d. In the CTRL3 register row, type 18 in the Write
Value edit box to enable SCOC and SCGC
registers. Press the Write button.
Programmable Gain Register Bits
In the CTRL3 register of the MAX11206, MAX11209,
MAX11210, and MAX11213 devices, there are 3 digital
gain bits that control the input-referred gain. The user
can change the gain by typing a new value in the CTRL3
_______________________________________________________________________________________
7
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Table 1. MAX11206/MAX11209/MAX11213
DGAIN[2:0] Decoding
Table 2. MAX11210 DGAIN[2:0] Decoding
GAIN
1
DGAIN2
DGAIN1
DGAIN0
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
GAIN
DGAIN2
DGAIN1
DGAIN0
2
1
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
4
2
8
4
16
16
16
16
8
16
32
64
128
register row’s Write Value edit box and pressing the
Write button. Decoding of programmable gain bits is
listed in Tables 1 and 2.
type in the new values, and press Enter to update these
values for conversion-result calculation.
In the Number of Samples Requested edit box, type in
the number of samples expected.
Detailed Description of Software
Press the Start Conversion
&
Data Logging
Software Main Window
In the top section of the main window, an SPIK
command byte can be generated. Select the expected
bit values and press the Send button to send the
command to the ADC.
button to start a data-acquisition session. For continuous
conversion mode, the user can discard the first 3
samples by checking the Do not log the first 3 samples
checkbox.
Press the Stop Conversion & Data Logging button to
stop the data-acquisition session before the requested
number of samples is reached.
In the middle section of the main window, SPI register
access commands can be generated. On each register
row, the register bit names are listed. Press the Read
button to read the register value. Type in a new value in
the Write Value edit box, and press the Write button to
write a new value to the register. Every write operation is
automatically followed by a readback operation to verify
that the write operation is successful. Press the Read All
button to read all the register values. Press the Write All
button to write all the new values in the edit boxes to the
registers.
After a data-acquisition session is complete or stopped
by the user, the software displays a popup window
(Figure 4) asking if the user wants to save the data to
a file. If the user presses the Yes button, the software
displays a Save As window (Figure 5) to let the user
input the file information for logged data.
In the bottom section of the main window, EV kit and
device status are displayed.
The CLK Selection group box lists the clock input
options for the MAX11200 family of data converters.
The Conversion Mode group box is a duplicate for the
SCYCLE register bit.
In the REFP, REFN, AVDD group box, the factory-set
AVDD and reference voltages are listed. The user can
apply user-supplied AVDD and reference voltages,
Figure 4. MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 EV Kit Software (Save Data Information Popup
Window)
SPI is a trademark of Motorola, Inc.
8
______________________________________________________________________________________
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Figure 5. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Software (Save As Window)
scope. Doing data analysis while data acquisition is in
progress can cause data loss because the PC may not
have enough processing power for multitasking.
Data Analysis Tab
The Data Analysis tab sheet (Figure 3) shows the
waveform scope of the sampled signal. The user can
load previous logged data to view the signal waveform
by pressing the Load Log File… button. The user can
zoom in and zoom out the scope. The user can also save
and print the scope screenshot.
Logged Data
Figure 6 shows a sample of logged data (*.csv) opened
M
in the Microsoft Excel spreadsheet. Figure 7 shows
the same file opened in the Microsoft Notepad. Use
monospaced fonts (such as Courier or Lucida Console)
to open the file for clear alignment.
The user can select the Y axis of the scope to be the
ADC conversion counts or the calculated voltage values.
When the device works in fast continuous-conversion
mode, avoid frequently moving the mouse over the
Excel is a registered trademark of Microsoft Corporation.
_______________________________________________________________________________________
9
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Figure 6. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Software (Logged Data Opened in Excel)
10 _____________________________________________________________________________________
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Figure 7. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Software (Logged Data Opened in Notepad)
______________________________________________________________________________________ 11
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Signal Routing
When using an external reference, firmly connect the
reference cables on pins 9 and 10 of the J1 connector.
Detailed Description of Hardware
The MAX11200, MAX11206, MAX11209, MAX11210,
and MAX11213 EV kits are complete evaluation systems
for the MAX11200 family of data converters. The EV kits
provide on-board isolated power supplies and
optocouplers to reduce noise. The EV kits can do simple
real-time data acquisition for the user to evaluate the
performance of the devices.
The devices in the MAX11200 family are single-channel
data converters. Normally, the inputs are applied on pins
11 and 12 of the J1 connector.
Using GPIO1, GPIO2, and GPIO3 to control the MAX4782
4-channel multiplexer, 4 channels of signals can be input
to the MAX11200 family devices. See Table 4 for GPIO1,
GPIO2, and GPIO3 functions.
See Table 3 for a description of all EV kit jumper
configurations.
Table 3. Jumper Descriptions (JU1–JU10)
JUMPER
SHUNT POSITON
1-2*
1-3
DESCRIPTION
ADC CLK connected to on-board 2.4576MHz clock
JU1
ADC CLK connected to on-board 2.048MHz clock
ADC CLK connected to a user-supplied clock
ADC REFP connected to on-board 3.0V reference
ADC REFP connected to user-supplied reference EXT_REFP
ADC REFN connected to isolated GND
1-4
1-2*
2-3
JU2
JU3
JU4
JU5
JU6
JU7
1-2*
2-3
ADC REFN connected to user-supplied reference EXT_REFN
ADC DVDD connected to on-board 3.3V isolated power supply
ADC DVDD connected to user-supplied power supply
ADC AVDD connected to on-board 3.3V isolated power supply
ADC AVDD connected to user-supplied power supply
Disable 2.4576MHz clock oscillator (reduce noise)
Enable 2.4576MHz clock oscillator
1-2*
2-3
1-2*
2-3
Open*
1-2
Open*
1-2
Disable 2.048MHz clock oscillator (reduce noise)
Enable 2.048MHz clock oscillator
1-2*
3-4
ADC AINN connected to REFP
ADC AINN connected to REFN
5-6
ADC AINN connected to (REFP+REFN)/2
ADC AINN connected to isolated GND
JU8
JU9
7-8
9-10
11-12
1-2*
3-4
ADC AINN connected to EXT_AINN
ADC AINN connected to MAX4782, pin Y
ADC AINP connected to REFP
ADC AINP connected to REFN
5-6
ADC AINP connected to (REFP+REFN)/2
ADC AINP connected to isolated GND
7-8
9-10
11-12
1-2*
ADC AINP connected to EXT_AINP
ADC AINP connected to MAX4782, pin X
ADC DVDD connected to on-board 3.3V isolated power supply
JU10
ADC DVDD disconnected from on-board 3.3V isolated power supply
(for current measurement)
Open
*Default position.
12 _____________________________________________________________________________________
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Table 4. MAX4782 Switch Programming (GPIO1, GPIO2, GPIO3)
SELECT INPUT
ENABLE INPUT
(GPIO1)
CTRL2 REGISTER WRITE
EXAMPLE
ON SWITCHES
B(GPIO2)
A(GPIO3)
H
Don’t care
Don’t care
All switches open
0xF1
X-X0
Y-Y0
L
L
L
H
L
0xF0
X-X1
Y-Y1
L
L
L
L
H
H
0xF4
0xF2
0xF6
X-X2
Y-Y2
X-X3
Y-Y3
H
______________________________________________________________________________________ 13
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Figure 8a. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Schematic (Sheet 1 of 2)
14 _____________________________________________________________________________________
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Figure 8b. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Schematic (Sheet 2 of 2)
______________________________________________________________________________________ 15
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
1.0”
Figure 9. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Component Placement Guide—Component Side
1.0”
Figure 10. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit PCB Layout—Component Side
16 _____________________________________________________________________________________
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
1.0”
Figure 11. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit PCB Layout—Inner Layer 2
1.0”
Figure 12. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit PCB Layout—Inner Layer 3
______________________________________________________________________________________ 17
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
1.0”
Figure 13. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit PCB Layout—Solder Side
18 _____________________________________________________________________________________
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Revision History
REVISION REVISION
PAGES
CHANGED
DESCRIPTION
NUMBER
DATE
0
9/10
Initial release
—
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied.
Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
19
©
2010 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.
相关型号:
MAX1121EGK
1.8V, 8-Bit, 250Msps Analog-to-Digital Converter with LVDS Outputs for Wideband Applications
MAXIM
MAX1121EGK+D
ADC, Proprietary Method, 8-Bit, 1 Func, 1 Channel, Parallel, 8 Bits Access, 10 X 10 MM, 0.9 MM HEIGHT, ROHS COMPLIANT, MO-220, QFN-68
MAXIM
MAX1121EGK+TD
ADC, Proprietary Method, 8-Bit, 1 Func, 1 Channel, Parallel, 8 Bits Access, 10 X 10 MM, 0.9 MM HEIGHT, ROHS COMPLIANT, MO-220, QFN-68
MAXIM
MAX1121EGK-D
ADC, Proprietary Method, 8-Bit, 1 Func, 1 Channel, Parallel, 8 Bits Access, 10 X 10 MM, 0.9 MM HEIGHT, MO-220, QFN-68
MAXIM
MAX1121EGK-TD
ADC, Proprietary Method, 8-Bit, 1 Func, 1 Channel, Parallel, 8 Bits Access, 10 X 10 MM, 0.9 MM HEIGHT, MO-220, QFN-68
MAXIM
MAX1122
1.8V. 10-Bit. 170Msps Analog-to-Digital Converter with LVDS Outputs for Wideband Applications
MAXIM
MAX1122BEGK+D
ADC, Proprietary Method, 10-Bit, 1 Func, 1 Channel, Parallel, Word Access, 10 X 10 MM, 0.90 MM HEIGHT, ROHS COMPLIANT, MO-220, QFN-68
MAXIM
MAX1122BEGK+TD
ADC, Proprietary Method, 10-Bit, 1 Func, 1 Channel, Parallel, Word Access, 10 X 10 MM, 0.90 MM HEIGHT, ROHS COMPLIANT, MO-220, QFN-68
MAXIM
MAX1122BEGK-D
ADC, Proprietary Method, 10-Bit, 1 Func, 1 Channel, Parallel, Word Access, 10 X 10 MM, 0.90 MM HEIGHT, MO-220, QFN-68
MAXIM
©2020 ICPDF网 联系我们和版权申明