MAX2870EVKIT [MAXIM]
All Critical Peripheral Components Included;型号: | MAX2870EVKIT |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | All Critical Peripheral Components Included |
文件: | 总17页 (文件大小:4044K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Evaluate: MAX2870/MAX2871
MAX2870/MAX2871 Evaluation
Kits
General Description
Features
The MAX2870/MAX2871 evaluation kits (EV kits) simplify
the testing and evaluation of the MAX2870 and MAX2871
ultra-wideband phase-locked loop (PLL) with integrated
voltage-control oscillators (VCOs). Each EV kit is fully
assembled and tested at the factory. Standard 50Ω SMA
connectors are included on the EV kits for the inputs
and outputs to enable quick and easy evaluation on the
test bench.
● Easy Evaluation of the MAX2870 and MAX2871
● 50Ω SMA Connectors
● All Critical Peripheral Components Included
● PC Control Software
● Proven PCB Layout
● Fully Assembled and Tested
This document provides a Quick Start guide, a
description of the EV kit circuit, a Troubleshooting Guide,
the circuit schematic, a list of components for the EV kit,
and diagrams for each layer of the PCB.
Ordering Information appears at end of data sheet.
Note: This EV kit data sheet supports the MAX2870 (Rev
B) and MAX2871 EV kits. Customers using MAX2870
(Rev A) EV kit can access the schematic, PCB layout, and
user guide under the Help menu of the EV kit software.
Software Installation and Evaluation Guide
Quick Start
1) Visit www.maximintegrated.com/evkitsoftware to
download the latest version of the EV kit software,
Max287X_Setup_1-1-x.zip.
Required Equipment
●
●
●
●
MAX2870/MAX2871 EV kit board
Mini-USB type A-to-type B cable (included)
User-supplied Windows PC
2) Extract the zip file and run the installation file.
Restart the PC after installation.
User-supplied spectrum analyzer or signal analyzer
3) Run the MAX287x.exe file. Choose the correct IC
type (MAX2870 or MAX2871) at the front page and
click the Continue button. The EV kit GUI appears
and looks similar to Figure 2.
Note: In the following sections, software-related items are
identified by bolding. Text in bold refers to items from the
EV kit software. Text in bold and underlined refers to
items from the Windows operating system.
4) Verify that USB Connected is displayed in green in
the lower right-hand corner of the GUI.
Procedure
5) Verify that the EV kit TCXO (U2) frequency matches
the EV kit software REF. FREQ. If not, enter the
correct value in MHz (default is 50) and press the
Enter key.
Hardware Connection Guide
Each EV kit is fully assembled and tested. Follow the
steps below to verify board operation:
1) Verify that all jumpers are in their default positions, as
shown in Figure 1.
6) In the GUI, click on the Defaults button and then the
Send All button located at the top of the GUI.
2) Connect the USB cable from the PC to the EV kit.
7) Enter the desired output frequency in MHz in the
RF_OUTA or RF_OUTB edit box and press the
Enter key.
3) Connect one of the RFOUT SMA connectors to a
signal analyzer or spectrum analyzer.
8) Verify that the PLL Lock indicator in the lower right-
4) Terminate the remaining unused RFOUT ports with a
hand corner of the GUI is displayed in green.
50Ω pad.
9) Use the signal analyzer to verify the performance of
the MAX2870 or MAX2871.
19-6805; Rev 2; 11/15
Evaluate: MAX2870/MAX2871
MAX2870/MAX2871 Evaluation Kits
Figure 1. MAX2870/MAX2871 EV Kit Hardware Connection
MAX2870 simulated phase noise (using the Maxim
EE-Sim® PLL tool). Note: If the reference-source
phase noise is poor, it could impact the ICs’ output
phase noise.
Troubleshooting Guide
External Reference Source
The default on-board crystal oscillator frequency is
50MHz. To use a different reference frequency, perform
the following steps:
RF Output Level
There is a 3dB pad at each RFOUT port. The purpose of
these 3dB pads is to provide reasonable matched load
to the ICs’ outputs when unused. Therefore, direct power
measurement at the EV kit’s RF OUT SMA ports is 3dB
lower than the actual output level. To measure the true
output level, remove the 3dB pads and terminate all active
unused ports with a 50Ω load.
1) Remove jumper JP14 (disables on-board XTAL
oscillator).
2) Apply a reference signal to the REFIN SMA port,
(power > 0 dBm).
3) Update the REF. FREQ. value in the EV kit GUI .
4) Program the IC to the desired frequency.
5) Optional: It is recommended to measure the
reference-source phase noise and check the
EE-Sim is a registered trademark of Maxim Integrated Products, Inc.
Maxim Integrated
│ 2
www.maximintegrated.com
Evaluate: MAX2870/MAX2871
MAX2870/MAX2871 Evaluation Kits
Figure 2. MAX2870/MAX2871 EV Kit Software GUI
Export/Import Full Register Settings
To export the full register settings from the MAX2870/
MAX2871, perform the following steps:
To import full register settings to the MAX2870/MAX2871,
perform the following steps:
● Copy the register settings (comma delimited) from a
text editor to the clipboard.
● Click on Reg → Clip in the lower left-hand corner
of the GUI. The registers are then saved to the clip-
board.
● Click on Clip → Reg in the lower left-hand corner of
the GUI.
● Paste the clipboard to any text editor.
● Click the Send All button in the top right-hand
corner of the GUI.
Maxim Integrated
│ 3
www.maximintegrated.com
Evaluate: MAX2870/MAX2871
MAX2870/MAX2871 Evaluation Kits
Component List, PCB Layout, and
Schematics
See the following links for component information, PCB
layout diagrams, and schematics.
Ordering Information
PART
TYPE
EV Kit
EV Kit
MAX2870VKIT#
MAX2871VKIT#
● MAX2870/MAX2871 EV BOM
#Denotes RoHS compliant.
● MAX2870/MAX2871 EV PCB Layout
● MAX2870/MAX2871 EV Schematics
Note: Customers using older versions of the MAX2870 EV kit
can access the EV kit data sheet from the Help menu in the
software GUI.
Maxim Integrated
│ 4
www.maximintegrated.com
Evaluate: MAX2870/MAX2871
MAX2870/MAX2871 Evaluation Kits
Revision History
REVISION REVISION
PAGES
CHANGED
DESCRIPTION
NUMBER
DATE
0
1
2
9/13
Initial release
—
10/14
11/15
Added MAX2871 to data sheet
1–15
Step 4 added to hardware connections to terminate unused ports
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at www.maximintegrated.com.
Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses
are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time.
©
Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc.
2015 Maxim Integrated Products, Inc.
│ 5
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MAX2870/MAX2871 Bil Value= open or NPI, means Do Not install
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Item
Qty
Reference
Value
Toler
10%
10%
Description
Part Name
Manufacturer
Part Number
0.01UF_10%_TR\GRM155R71E\610MURA,
10nF,10%
1
1
C72
10nF
Capacitor
GRM155R71E103K
GRM188R71C104K
LT L29S-P2R1-25-Z
1N4001
0.1UF_10%_TR\GRM188R71C\610MURA,0
.1uF,10%
2
5
C28-29 C41 C44 C71
D1 D3-5
D2
0.1uF
0603 Capacitor
GREEN LED
3
4
Green LED
Diode
0603_LED,Green LED
4
1
GENERIC DIODE AXIAL LEAD
0402 Capacitor
0402 Capacitor
Hex Buffer/Driver OC
Red Bananna Plug
Red Bananna Plug
Shield
1N4001,Diode
330PF_10%_TR\GRM155R71H\610MURA,
330pF,10%
5
2
C38 C56
C42-43
U6
330pF
10%
5%
GRM155R71H331K
GRM1555C1H330J
SN74LV07ADR
571-0500-01
33PF_5%_TR\GRM1555C1H\610MURA,33
pF,5%
6
2
33pF
7
1
SN74LV07ADR
Bananna Plug Black
Bananna Plug Red
NPI
74LV07A,SN74LV07ADR
8
1
GNDSUPPLY
VSUPPLY
S1
BANANNA_JACK,Bananna Plug Black
BANANNA_JACK,Bananna Plug Red
BMIS-203MOD1,NPI
9
1
571-0500-01
10
11
12
13
14
15
16
0
BMI-S-205
2
C48 C50
C23 C37
Y1
4.7 uf
0805 Capacitor
Tantalum Capacitor - C-Case
6 MHz Crystal
CAP0805MIL,4.7 uf
MURATA
GRM219R61A475K
TAJC106K016R
ECS-60-20-5PX-TR
CWX823-050.0M
PEC36DAAN
2
10uF
10%
CAPT6032N,10uF,10%
1
ECS-60-20-5PX-TR
CWX823-050.0M
Open
CSM-7,ECS-60-20-5PX-TR
CWX8XX_5X7MM,CWX823-050.0M
INTERFACE_2300\730\HEAD,Open
JUMPER2,2 Pin Header
1
U2
0
INTF2400
JP14
0.1 Centers 2x10 Header
1
2 Pin Header
2 Pin In-Line Header - 100 Mil Centers
PEC36SAAN
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
1
3
1
2
1
1
6
2
1
9
2
1
4
4
1
3
4
1
2
2
JP7
NPI
3 Pin In-Line Header - 100 Mil Center
3 Pin In-Line Header - 100 Mil Center
6GHz Pll withopen VCO
LDO
JUMPER3,NPI
PEC36SAAN
PEC36SAAN
VCC_PLL VCC_VCO VUSB
3 Pin Header
MAX2870 /MAX2871
MAX8559ET
PIC16C765-I/PT
0 ohm
JUMPER3_SHORT,3 Pin Header
MAX2870/MAX2871
MAX2870ETJ+/MAX287
1ETJ+
U1
MAXIM
MAXIM
U3 U5
U8
MAX8559_JLA,MAX8559ET
PIC16C765_TQFQ,PIC16C765-I/PT
SHORT\0402\600WIND,0 ohm
SMA_EDGE_MOUNT,SMA
SN74LV07A,SN74LV07ADR
TBD\0402\600WIND,0,5%
TBD\0402\600WIND,0 ohm,5%
TBD\0402\600WIND,0 ohms
TBD\0402\600WIND,1.5K,5%
TBD\0402\600WIND,100,5%
TBD\0402\600WIND,10k
MAX8559ETAAA+
PIC MICROCONTROLLER
0402 Resistor
PIC16C765-I/PT
R104
Use Lead-Free parts only
142-0701-851
MUXOUT REFIN RFOUTAN RFOUTAP
RFOUTBN RFOUTBP
SMA
SMA End Launch Jack Receptacle 0.062"
Hex Buffer/Driver OC
0402 Resistor
U4 U10
SN74LV07ADR
0
SN74LV07ADR
R46
0.05
5%
Use Lead-Free parts only
Use Lead-Free parts only
R18 R112-117 R119-120
0 ohm
0402 Resistor
R10 R51
R33
0 ohms
1.5K
0402 Resistor
0.05
5%
0402 Resistor
Use Lead-Free parts only
Use Lead-Free parts only
R42 R55 R61-62
R11 R17 R39-40
R54
100
0402 Resistor
10k
0402 Resistor
10kohms
120
0402 Resistor
TBD\0402\600WIND,10kohms
TBD\0402\600WIND,120,5%
TBD\0402\600WIND,18 Ohms,1%
TBD\0402\600WIND,240 ohms,5%
TBD\0402\600WIND,27nH,1%
TBD\0402\600WIND,3.1K
R12-14
0.05
0.01
5%
0402 Resistor
R1 R23 R26 R29
R3
18 Ohms
240 ohms
27nH
0402 Resistor
0402 Resistor
R6-7
1%
0402 inductor
LQP15MN27NG02
R45 R64
3.09K
1%
0402 Resistor
Use Lead-Free parts only
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
6
R71-73 R83 R85 R87
3.09K
1%
1%
1%
1%
0402 Resistor
0402 Resistor
0402 Resistor
0402 Resistor
0402 Resistor
0402 Resistor
0402 Resistor
0402 Resistor
0402 Resistor
0402 Resistor
0402 Resistor
0402 Resistor
0402 Resistor
0402 Resistor
0402 Capacitor
0402 Capacitor
0402 Capacitor
0402 Capacitor
0402 Capacitor
0402 Capacitor
TBD\0402\600WIND,3.1K,5%
TBD\0402\600WIND,30.1 Ohms,1%
TBD\0402\600WIND,300 Ohms,1%
TBD\0402\600WIND,49.9 Ohms,1%
TBD\0402\600WIND,5.1K
1
R2A
30.1 Ohms
300 Ohms
49.9 Ohms
5.1K
8
R2 R22 R24-25 R27-28 R30-31
2
R4-5
R32 R65 R70 R74-77 R80 R88 R92
R105-106
12
5
Use Lead-Free parts only
Use Lead-Free parts only
R15-16 R36 R41 R99
5.1k
TBD\0402\600WIND,5.1k
1
R93
5.1k
1%
TBD\0402\600WIND,5.1k,1%
TBD\0402\600WIND,5.1k,5%
TBD\0402\600WIND,90.9 Ohms,1%
TBD\0402\600WIND,OPEN
1
R60
5.1k
5%
1
R2B
90.9 Ohms
OPEN
0.01
0
R8-9 R52-53
R19-21
R37-38
R43-44
R34-35
C1
0
Open
0.01
0.05
TBD\0402\600WIND,Open,1%
TBD\0402\600WIND,open
0
open
0
open
TBD\0402\600WIND,open
Use Lead-Free parts only
Use Lead-Free parts only
GRM155R71C123K
GRM155R71C103K
GRM155R61C104K
GRM155R61A105K
C1005C0G1H101K
0
open
TBD\0402\600WIND,open,5%
TBD\0402\610WIND,0.012uF
TBD\0402\610WIND,0.01uF
TBD\0402\610WIND,0.1uF
1
0.012uF
0.01uF
0.1uF
MURATA
MURATA
MURATA
MURATA
TAIYOYUDEN
C5-6 C9-10 C21-22 C31 C33 C39-40
C45-46 C92
13
4
C2 C47 C49 C91
C15-16 C24
3
1.0uF
10%
5%
TBD\0402\610WIND,1.0uF,10%
TBD\0402\610WIND,100pF,5%
TBD\0402\610WIND,10pF,5%
10
3
C0 C4 C7-8 C11 C17-20 C93
C25-27
100pF
10pF
TDK
CORPORATION
0.05
C1005C0G1H100D
57
58
59
60
61
62
63
64
65
66
67
68
69
70
1
0
0
6
0
9
0
0
0
1
4
2
1
1
C3
820pF
0402 Capacitor
0402 Capacitor
0402 Capacitor
0603 Capacitor
0603 Capacitor
0805 Resistor
1206 Capacitor
1206 Capacitor
Testpoint
TBD\0402\610WIND,820pF
TBD\0402\610WIND,NPI
TBD\0402\610WIND,open
TBD\0603\610WIND,2.2uF
TBD\0603\610WIND,NPI
TBD\0805\600WIND,0,1%
TBD\1206\610WIND,NPI
TBD\1206\610WIND,NPI
TESTPOINT,NPI
MURATA
MURATA
GRM155R71H821K
GRM188R61A225K
C12
NPI
C13
open
C14 C30 C32 C34-36
C101-103
R47-50 R56-59 R63
C201-202
C203
2.2uF
NPI
0
0.01
NPI
NPI
CE CLK DATA LD MUX_OUT RF_EN SW
VTUNE
NPI
5000
VCC
PC Mini - Red
PC Mini-Black
PC Mini-Yellow
Mini USB
Mini USB Cable
Testpoint
TESTPOINT,PC Mini - Red
TESTPOINT,PC Mini-Black
TESTPOINT,PC Mini-Yellow
USB_MINI_B,Mini USB
5000
GND GND1-3
LE PHASE_ADJ
J2
Testpoint
5001
Testpoint
5000
MINI-USB T YPE B
897-43-005-00100001
This is USB cable should be placed in EVK
package, not the component on PCB
Qualtek 3021003-03
digikey # Q362-ND
Mini USB Cable
3 4
3 5
3 6
3 7
3 8
3 9
4 0
4 1
4 2
4 3
4 4
N C
R A 3 / A N 3 / V R E F
2 2
R C 1 / T 1 O S I / C C P 2
R C 2 / C C P 1
V U S B
R A 2 / A N 2
2 1
R A 1 / A N 1
2 0
R A 0 / A N O
1 9
R D 0 / P S P 0
R D 1 / P S P 1
R D 2 / P S P 2
R D 3 / P S P 3
M C L R N / V P P
1 8
R B 7
1 7
R B 6
1 6
R B 5
1 5
D -
R B 4
1 4
D +
N C
1 3
R C 6 / T X / C K
N C
1 2
相关型号:
©2020 ICPDF网 联系我们和版权申明