MAX40005 [MAXIM]

0.1V to 5.5V Input Voltage Range;


型号：	MAX40005
厂家：	MAXIM INTEGRATED PRODUCTS
描述：	0.1V to 5.5V Input Voltage Range
文件：	总6页 (文件大小：632K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Evaluates: MAX40002–MAX40005

MAX40012–MAX40015

MAX40002–MAX40005

Evaluation Kits

General Description

Quick Start

The MAX40002–MAX40005 evaluation kits (EV kits) are

fully assembled and tested PC boards that evaluate

Required Equipment

Before beginning, the following equipment is needed:

the

comparators. The MAX40002ANS02–MAX40005ANS02

operate from a V supply between 1.7V to 5.5V, come

MAX40002ANS02–MAX40005ANS02

single

●

Three +5V DC power supplies (V /REF, IN, and V

)

One digital multimeter (DMM)

with an internal reference voltage of 0.2V, and have a

wide 0.1V to 5.5V input voltage (IN) range. These EV kits

demonstrate the MAX40002ANS02–MAX40005ANS02 in

an ultra-small, 0.76mm x 0.76mm, 4-bump wafer-level

package (WLP) with 0.35mm bump spacing.

Procedure

The MAX40002–MAX40005 EV kits are fully assembled

andtested. Followthesestepstoverifyboardoperation. Do

not turn on the power supply until all connections are

completed.

These EV kits are conﬁgured to evaluate all devices in

the MAX40002–MAX40005/MAX40012–MAX40015 family

that have a 4-bump wafer-level package (WLP). To evalu-

ate other WLP devices in this MAX40002–MAX40005/

MAX40012–MAX40015 family other than what is pre-

installed, replace the U1 IC with the desired part (see

Ordering Information for details).

1) Connect the positive terminal of a DC power supply to

the V

pad and the ground terminal to the GND pad.

2) Connect the positive terminal of a DC power supply to

the V pad and the ground terminal to the GND pad

(MAX40002/MAX40003/MAX40012/MAX40013 only).

3) Connect the positive terminal of a DC power supply to

the IN pad and the ground terminal to the GND pad.

4) Turn on the V

desired level.

Features

● 0.1V to 5.5V Input Voltage Range

power supply and set it to the

5) Turn on the V

power supply and set it to the

● 1.7V to 5.5V External Reference Range

desired level (MAX40002/MAX40003/MAX40012/

MAX40013 only).

6) Turn on the IN power supply and set it to the

desired level.

7) Monitor the output using a DMM at the OUT pad,

and study its response to varying voltage at IN (see

Table 1 for more information).

(MAX40002ANS─MAX40005ANS)

● 1.7V to 5.5V V

Range with Internal Reference

(MAX40002ANS_ _─MAX40005ANS_ _)

• 0.2V, 0.5V, 0.9V, and 1.222V Internal Reference

Options Available

● Evaluates 4-Bump WLP Package

● Fully Assembled and Tested

Ordering Information appears at the end of the data sheet.

19-8554; Rev 1; 2/20

Evaluates: MAX40002–MAX40005

MAX40012–MAX40015

MAX40002–MAX40005

Evaluation Kits

Table 1. How Devices Behave Under Various Input Voltage Conditions

INPUT VOLTAGE

CONDITIONS

PART

INPUT POLARITY

ACTION AT OUTPUT

REF

> V

< V

> V

< V

Output goes high

MAX40002,

MAX40004

MAX40012,

MAX40014

REF

Noninverting

Output goes low

Output goes high

Output goes low

REF

External

MAX40003,

MAX40005

MAX40013,

MAX40015

REF

Inverting

Noninverting

Inverting

REF

> V

< V

MAX40002,

MAX40004

MAX40012,

MAX40014

REF _INT

Internal

MAX40003,

MAX40005

MAX40013,

MAX40015

> V

Output goes low

Output goes high

REF _INT

< V

The V

Pad

Detailed Description of Hardware

The MAX40002–MAX40005 EV kits are fully assembled

and tested PC boards that evaluate the 4-bump WLP

MAX40002ANS02–MAX40005ANS02 comparators.

pad on the EV kit is used to connect a pullup

supply voltage up to 5.5V for the open-drain output

devices (MAX40002/MAX40003/MAX40012/MAX40013)

for proper operation. Remove R1 and eliminate V

evaluating the push-pull output devices (MAX40004/

MAX40005/MAX40014/MAX40015).

/REF Supply Selection

The V /REF pad on the EV kit is used to either supply a

1.7V to 5.5V V

voltage (internal reference devices) or a

1.7V to 5.5V external reference voltage to the IC. Refer to

the MAX40002–MAX40005 and MAX40012–MAX40015

data sheets for more information.

Ordering Information

(V)

SWAP U1 IC TO

EVALUATE

REF

PART*

U1 IC (INSTALLED)

TYPE

MAX40002EVKIT#

MAX40003EVKIT#

MAX40004EVKIT#

MAX40005EVKIT#

MAX40002ANS02+

MAX40003ANS02+

MAX40004ANS02+

MAX40005ANS02+

0.2

EV Kit

MAX40012

MAX40013

MAX40014

MAX40015

0.2

#Denotes RoHS-compliant

Maxim Integrated

│ 2

www.maximintegrated.com

Evaluates: MAX40002–MAX40005

MAX40012–MAX40015

MAX40002–MAX40005

Evaluation Kits

MAX40002–MAX40005 EV Kit Bill of Materials*

DNI/

DNP

ITEM REF_DES

QTY

MFG PART #

MFCTR

VALUE DESCRIPTION

CAPACITOR; SMT (0805); CERAMIC

GRM21BR71A475KA7 MURATA/TAI

3; LMK212B7475KG-T YO YUDEN

CHIP; 4.7UF; 10V; TOL=10%;

MODEL=GRM SERIES; TG=-55 DEGC

TO +125 DEGC; TC=X7R

4.7UF

CAPACITOR; SMT (0603); CERAMIC

CHIP; 0.1UF; 25V; TOL=10%;

MODEL=C SERIES; TG=-55 DEGC TO

+125 DEGC; TC=X7R

C1608X7R1E104K080

C2, C4

TDK

0.1UF

TEST POINT; PIN DIA=0.125IN;

TOTAL LENGTH=0.35IN; BOARD

HOLE=0.063IN; BLACK; PHOSPHOR

BRONZE WIRE SILVER PLATE

FINISH;

TEST POINT; PIN DIA=0.125IN;

TOTAL LENGTH=0.35IN; BOARD

HOLE=0.063IN; RED; PHOSPHOR

BRONZE WIRE SILVER PLATE

FINISH;

GND, TP1,

TP2

5006

KEYSTONE

N/A

IN, OUT,

VCC, VPU

5005

EVKIT PART-IC; COMP; 600NA; 4-

MAX4000 BUMP ULTRA-TINY COMPARATOR;

4ANS+ PACKAGE OUTLINE: 21-100103;

PACKAGE CODE: N40C0+1; WLP4

MAX40004ANS+

MAXIM

TDK

CAPACITOR; SMT (0603); CERAMIC

CHIP; 0.1UF; 25V; TOL=10%;

MODEL=C SERIES; TG=-55 DEGC TO

+125 DEGC; TC=X7R

RESISTOR; 0603; 100K OHM; 0.1%;

10PPM; 0.1W; THIN FILM

C1608X7R1E104K080

DNP

0.1UF

R1, R2 DNP

PCB

ERA-3ARB104

MAX40004

PANASONIC

MAXIM

100K

PCB Board:MAX40004 EVALUATION

PCB

KIT

TOTAL

*Specified for the MAX40004. For other variants, change U1 to the desired device. All other components are the same.

Maxim Integrated

│ 3

www.maximintegrated.com

Evaluates: MAX40002–MAX40005

MAX40012–MAX40015

MAX40002–MAX40005

Evaluation Kits

MAX40002–MAX40005 EV Kit PCB Layout Diagrams*

MAX40002–MAX40005 EV Kit—Top

MAX40002–MAX40005 EV Kit—Top Silkscreen

MAX40002–MAX40005 EV Kit—Bottom

MAX40002–MAX40005 EV Kit—Bottom Silkscreen

*Specified for the MAX40004. For other variants, change U1 to the desired device. All other components are the same.

Maxim Integrated

│ 4

www.maximintegrated.com

Evaluates: MAX40002–MAX40005

MAX40012–MAX40015

MAX40002–MAX40005

Evaluation Kits

MAX40002–MAX40005 EV Kit Schematic*

VPU

0.1UF

DNI

MAX40004ANS02+

VCC

VCC/REF

OUT

TP1

GND

DNI

GND

4.7UF

0.1UF

DNI

TP2

*Specified for the MAX40004. For other variants, change U1 to the desired device. All other components are the same.

Maxim Integrated

│ 5

www.maximintegrated.com

Evaluates: MAX40002–MAX40005

MAX40012–MAX40015

MAX40002–MAX40005

Evaluation Kits

Revision History

REVISION REVISION

PAGES

CHANGED

DESCRIPTION

NUMBER

DATE

1/17

2/20

Initial release

—

Added MAX40012–MAX40015 part numbers to data sheet

1–6

For pricing, delivery, and ordering information, please visit Maxim Integrated’s online storefront at https://www.maximintegrated.com/en/storefront/storefront.html.

Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses

are implied. Maxim Integrated reserves the right to change the circuitry and speciﬁcations without notice at any time.

Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc.

2020 Maxim Integrated Products, Inc.

│ 6

相关型号：