MAX7411CUA+ [MAXIM]
MAXFILTERBRD; MAXFILTERBRD型号: | MAX7411CUA+ |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | MAXFILTERBRD |
文件: | 总5页 (文件大小:466K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
19-4884; Rev 0; 8/09
MAXFILTERBRD
General Description
The MAXFILTERBRD is an unpopulated PCB design to
evaluate the MAX7408–MAX7415/MAX7418–MAX7425
5th-order, lowpass, switched-capacitor filters (SCFs).
Features
S CLK Pad for External Clock Frequency
S Lead(Pb)-Free and RoHS Compliant
S Proven PCB Layout
Contact the factory for free samples of the pin-compat-
ible MAX7408–MAX7415/MAX7418–MAX7425 SCFs to
evaluate these devices.
Ordering Information
PART
TYPE
MAXFILTERBRD+
EV Kit
+Denotes lead(Pb)-free and RoHS compliant.
Part Selection Table
Component List
(Suggested Components)
OPERATING
PART
FILTER TYPE
DESIGNATION QTY
DESCRIPTION
VOLTAGE
MAX7408CUA+
MAX7409CUA+
MAX7410CUA+
MAX7411CUA+
MAX7412CUA+
MAX7413CUA+
MAX7414CUA+
MAX7415CUA+
MAX7418CUA+
MAX7419CUA+
MAX7420CUA+
MAX7421CUA+
MAX7422CUA+
MAX7423CUA+
MAX7424CUA+
MAX7425CUA+
5V
Elliptic
Bessel
Not installed, 47pF Q5%, 50V
C0G ceramic capacitor (0805)
Murata GRM2165C1H470J or
similar
5V
C1
C2
0
0
0
5V
Butterworth
Elliptic
5V
Not installed, 2200pF Q5%, 50V
C0G ceramic capacitor (0805)
Murata GRM2165C1H222J or
similar
3V
Elliptic
3V
Bessel
3V
Butterworth
Elliptic
3V
Not installed, 0.1FF Q10%, 16V
X7R ceramic capacitors (0603)
Murata GCM188R71C104K or
similar
5V
Elliptic
C3, C4
5V
Bessel
5V
Butterworth
Elliptic
5V
Not installed, 2-pin headers—
shorted by PC trace
JU1, JU2
R1
0
0
3V
Elliptic
3V
Bessel
Not installed, 10kI Q1% resistor
(0805)
3V
Butterworth
Elliptic
3V
Not installed, lowpass SCF
M
Note: Contact the factory to order a free sample of any of the
SCF parts.
U1
—
0
1
(8 FMAX )
See the Part Selection Table
PCB: MAXFILTERBRD+
Component Supplier
SUPPLIER
PHONE
770-436-1300
WEBSITE
Murata Electronics North America, Inc.
www.murata-northamerica.com
Note: Indicate that you are using the MAXFILTERBRD when contacting this component supplier.
µMAX is a registered trademark of Maxim Integrated Products, Inc.
_______________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
MAXFILTERBRD
OSCILLOSCOPE
Tektronix TDS3012
OR SIMILAR
SINE-WAVE INPUT
FUNCTION GENERATOR 1
Agilent 33120A OR SIMILAR
SINE-WAVE FREQUENCY:
0.001kHz TO 15kHz
FILTER’S SINE-WAVE OUTPUT
FILTEREVKIT
AMPLITUDE: 4V MAX
P-P
OFFSET: 2.2V TYPICAL
DC
EXTERNAL CLOCK
GND
+5V/+3V
POWER SUPPLY
HP E3610 OR SIMILAR
Figure 1. Filter Evaluation Test Block Diagram
the 5V supply to the VDD pad and the negative termi-
nal of the supply to the GND pad closest to the VDD
pad. If the installed IC is the MAX7412–MAX7415 or
MAX7422–MAX7425, connect the positive terminal
of the 3V supply to the VDD pad and the negative
terminal of the supply to the GND pad closest to the
VDD pad (see Figure 1). Set the function generator
Quick Start
Required Equipment
• MAXFILTERBRD
• Suggested components (see Component List)
• 5V or 3V DC power supply (depending on the IC
installed)
to 4V
max, 2.2V offset (typ), and 1kHz sine wave,
P-P
• Function generator (e.g., HP 33120A)
and connect the signal to the IN pad.
• 2-channel digital oscilloscope (e.g., Tektronix TDS3012)
3) Connect the first channel of the oscilloscope to the
IN pad.
Procedure
Caution: Do not turn on power supply until all connec-
tions are completed.
4) Connect the second channel of the oscilloscope to
the OUT pad.
5) Connect the oscilloscope’s ground probe to any GND
pads.
1) Install all suggested components shown in the
Component List onto the MAXFILTERBRD.
6) Turn on the power supply.
2) If the installed IC is the MAX7408–MAX7411 or
MAX7418–MAX7421, connect the positive terminal of
7) Verify the output on the OUT pad.
2
______________________________________________________________________________________
MAXFILTERBRD
External Clock
An external clock that matches the specification of the
corresponding IC data sheet can be used by cutting
the trace of jumper JU2. Drive the CLK pin with a CMOS
gate powered from 0 to VDD. Apply the clock signal to
the CLK pad.
Detailed Description of Hardware
The MAXFILTERBRD is an unpopulated PCB design to
evaluate the MAX7408–MAX7415/MAX7418–MAX7425
5th-order, lowpass SCFs.
Internal Clock
The MAXFILTERBRD uses the internal oscillator when
a capacitor is installed on C1. Refer to corresponding
installed IC data sheet.
Shutdown
The MAXFILTERBRD is configured for normal operation
once the desired IC is installed. The desired IC enters
shutdown by cutting the trace of jumper JU1 and driving
the IC SHDN pin low through the side of the jumper that
is still connected to the part.
For the MAX7409/MAX7410/MAX7413/MAX7414, the
frequency can be altered using the following formula:
f
(kHz) = k/C1 (pF)
OSC
3
where k = 30 x 10 and f
is the internal oscillator
OSC
frequency.
3
For the MAX7408/MAX7411/MAX7412/MAX7415, k = 27 x 10 .
3
For the MAX7418/MAX7421/MAX7422/MAX7425, k = 87 x 10 .
3
FortheMAX7419/MAX7420/MAX7423/MAX7424, k=110x10 .
_______________________________________________________________________________________
3
MAXFILTERBRD
Figure 2. MAXFILTERBRD Schematic
4
______________________________________________________________________________________
MAXFILTERBRD
Figure 3. MAXFILTERBRD Component Placement Guide—
Component Side
Figure 5. MAXFILTERBRD PCB Layout—Solder Side
Figure 4. MAXFILTERBRD Component PCB Layout—
Component Side
Figure 6. MAXFILTERBRD Component Placement Guide—
Solder Side
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied.
Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
5
©
2009 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明