MAX77958 [MAXIM]
High-Efficiency Single-Cell Switching Charger;型号: | MAX77958 |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | High-Efficiency Single-Cell Switching Charger |
文件: | 总32页 (文件大小:5646K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Click here to ask about the production status of specific part numbers.
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
General Description
Benefits and Features
● High-Efficiency Single-Cell Switching Charger
The MAX77975/MAX77976 evaluation kit (EV kit) is a
fully assembled and tested printed circuit board (PCB)
that demonstrates the MAX77975/MAX77976 single-cell
lithium-ion battery charger.
• Up to 5.5A Charging with MAX77976
• 91.2% Buck Efficiency at 4A, 12V Input
● +28V Absolute Maximum Input Voltage Rating
● 3.8V to 19V Input Operating Voltage Range
The MAX77975/MAX77976 is for 1S Li+ battery appli-
cations and can operate with a 3.8V to 19V input volt-
age with a maximum charging current of 3.5/5.5A. The
MAX77975/MAX77976 offers a reverse boost as well as
fully integrated low power loss switches to provide small
solution size and high efficiency. The EV kit demonstrates
the performance of the MAX77975/MAX77976 charger
and provides the convenience of evaluating full USB
● Reverse Boost with Programmable Output Voltage
Options Up to 12V
● Charge Status Output for LED
● Push-Button Input for Exiting from Ship Mode
● External Discharge FET Enable Output
● Dedicated Input for Suspend Mode (SUSPND)
®
Type-C PD solutions with the MAX77958 USB Type-C
PD controller. This combination allows fast charging of the
battery through the USB Type-C port as well as reverse
powering the USB Type-C port with battery OTG mode.
● USB Type-C Standalone Controller Support
Customizable Firmware
● USB Type-C Version 1.3 and PD 3.0 Compliant
● Sink/Source/DRP Port Support
● PPS Sink Support
A Micro-B USB cable is included in the package to serve
as the interface from a USB port on a Windows PC to
2
®
the slave I C port on MAX77975/MAX77976. Windows -
based graphical user interface (GUI) software provides
a user-friendly interface to exercise the features of the
MAX77975/MAX77976.
● Fast Role Swap Initial Sink Support
● Integrated V
Switch with OCP
CONN
● Support Try.Sink
● Support BC1.2 Legacy Charger Detection
Ordering Information appears at end of data sheet.
®
USB Type-C is a registered trademark of USB Implementers Forum.
Windows is a registered trademark and registered service mark of Microsoft Corporation.
319-100597; Rev 1; 11/20
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
Windows automatically updates the .NET framework
as needed.
Quick Start
Follow this procedure to familiarize yourself with the EV
3) The EV kit software launches automatically after in-
stallation, or it can be launched by clicking on its icon
in the Windows Start menu.
kit.
Note: In the following sections, software-related items are
identified by bolding. Text in bold refers to items directly
from the EV kit software. Text in bold and underlined
refers to items from the Windows operating system.
4) Make jumper connections based on the default con-
nection options in Table 1. Change it later when
evaluating more features. For the SW1 on the EV
kit, set the switch location to the RIGHT so that the
Required Equipment
2
MAX77975/MAX77976 I C lines are connected di-
● MAX77975/MAX77976 evaluation package
• MAX77975/MAX77976EVKIT# Board
• USB Micro-B cable
rectly to the MAXUSB communication interface. Later
you can switch it to the LEFT so that the MAX77975/
2
2
MAX77976 I C lines are connected to MAX77958 I C
master.
• MAX77975/MAX77976 EV kit software (GUI)
● USB Type-C or PD travel adapter (TA)
● Power supply
5) Make connections to the EV kit board following guid-
ance as shown in Figure 1. The two main inputs to
apply are the battery and the charging adaptor. For
quick start evaluation, it is suggested to use a 5V
power supply at the CHGIN input and a battery volt-
age greater than 3.6V at the BATT input. The optional
voltmeter and ammeter location for testing charger ef-
ficiency is indicated in Figure 1. When set up properly
with both CHGIN = 5V and BATT = 3.8V input, the
SYS voltage is regulated above VBATT by default.
● Battery simulator
● Multi-meters
● Windows-based PC
● Oscilloscope to monitor CC pin or other signals
Procedure
The EV kits are fully assembled and tested. Follow the
steps below to install the EV kit software, make required
hardware connections, and start operation of the kits. The
EV kit software can be run without attached hardware. Note
that after communication is established, the IC must still be
configured correctly for the desired operation mode. Make
sure the PC is connected to the internet throughout the pro-
cess so that the USB driver can be automatically installed.
6) Connect the EV kit to a USB port on the PC using a
USB Micro-B cable.
7) Open the GUI software, click Device > Connect. A
window pops up showing that a slave address corre-
spondingtoMAX77975/MAX77976and/orMAX77958
has been found. If not, check the connection.
1) Visit www.maximintegrated.com/products/MAX77975_
MAX77976 under the Design Resources tab to down-
load the latest version of the MAX77975/MAX77976
EV kit GUI software. Save the software to a tempo-
8) Start evaluating the part with the GUI software.
Unlock the write protection and adjust the char-
ger mode, the charging input current limit, and the
charging current to start evaluating the basic charger
features as described in the Configurations 0-13
Tabs section. Play with the charger mode and other
register settings to evaluate the smart power path and
more features. Remove the CHGIN input and use the
real travel adaptor to evaluate charging the battery
through the USB Type-C port.
rary folder and unpack the zip file
.
2) Install the EV kit software on your computer by run-
ning the MAX77975_MAX77976GUISetupX.X.X.exe
program inside the temporary folder. The program
files are copied, and icons are created in the Windows
Start menu. The software requires the .NET Frame-
work 4.5 or later. If you are connected to the Internet,
Maxim Integrated
│ 2
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
SYS
GND3
GNDS
A
BENCH
VOLTMETER
LOAD BOX
CHGINS
MAX77975
MAX77976
SYSS
CHGIN
GND1
A
BENCH
VOLTMETER
POWER
SUPPLY
SYSGNDS
OR
BATTSP
BATTSN
BATTP
1S LI-ION
BATTERY /
SIMULATOR
TYPE-C
ADAPTOR /
DEVICE
BATTN
USB C
USB MICRO-B
PC
Figure 1. MAX77975/MAX77976 EV Kit Board Connections. The power supply and the USB Type-C adaptor can NOT be applied at
the same time.
Table 1. Jumper Connection and Switch Setting Guide
DEFAULT
CONNECTION
JUMPER
FEATURE
Open: No additional capacitor added on SYS.
Bridge N jumpers (N can be 1, 2, 3, 4): Add N x 100µF capacitor on SYS.
J20
Open
Open: Disconnect BATTSP from BATTN. Allows BATTSP pin to remote sense at battery
positive terminal.
Closed: BATTSP sense point is directly at BATTP input terminal on the EV kit.
J21
J22
Closed
Closed
Open: Disconnect BATTSN from BATTN. Allows BATTSN pin to remote sense at battery
negative terminal.
Closed: BATTSN sense point is directly at BATTN input terminal on the EV kit.
Open: Disable external BATT to SYS FET circuit.
J23
J36
Open
Open
Closed: Enable the external BATT to SYS FET path to further reduce the BATT to SYS
on resistance. Need to connect J18 and J29.
Open: No additional capacitor added on BATT.
Closed: 220µF capacitor added on BATT.
Maxim Integrated
│ 3
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
Table 1. Jumper Connection and Switch Setting Guide (continued)
DEFAULT
CONNECTION
JUMPER
FEATURE
All Open: Disable thermistor.
Only 7-8 Closed: Enable thermistor function, connect pin 1 to the thermistor from the
battery pack to measure temperature directly at the battery.
1-2, 7-8 Closed: Enable thermistor function, a fixed 10kΩ pullup and pulldown
simulate a constant room temperature.
3-4, 7-8 Closed: Enable thermistor with temperature measurement from an NTC resistor
installed on EV kit.
1-2 (ROOM): Closed
3-4 (NTC): Open
5-6 (POT): Open
J5
7-8 (ENTH): Closed
5-6, 7-8 Closed: Enable thermistor with temperature measurement simulated with a
potentiometer R43.
Any other configuration: Do not configure.
Open: Disable external BATT to SYS FET circuit.
Close: Connect 100kΩ pullup for the external BATT to SYS FET circuit.
Need to connect J23 and J29.
J18
J29
Open
Open
Open: Disable external BATT to SYS FET circuit.
Close: Connect QBEXT pin to control external BATT to SYS FET circuit.
Need to connect J23 and J18.
Open: Default operation.
Closed: Force disconnect QBATT.
J37
J13
J17
Open
Open
Open
Open: Default operation.
Closed: Force SUSPEND = 1 to the charger.
Open: STAT pin LED indicator is disabled.
Closed: STAT pin LED indicator is enabled.
Open: Do not configure.
J7
2-3
1-2: VIO powered through EXTVIO with 1.8V external power supply.
2-3: VIO powered by USB Micro-B port connected to PC.
Open: MAX77958 V
Closed: MAX77958 V
is not powered.
CONN
J9
J3
Closed
Closed
Closed
is powered by SYS.
CONN
Open: MAX77958 is not connected to VBUS.
Closed: MAX77958 is connected to VBUS.
Open: MAX77958 is not powered by SYS.
Closed: MAX77958 is powered by SYS.
J16
Open: MAX77958 GPIO4 is not connected to MAX77975/MAX77976 IRQB.
Closed: MAX77958 GPIO4 is connected to MAX77975/MAX77976 IRQB.
Also, connect 1-2 on J15 for pullup.
J4
Open
Open: MAX77975/6 IRQB is not connected.
Close 1-2: MAX77975/6 connects to 100kΩ pullup to VIO
Close 3-4: IRQB LED indicator is enabled .
J15
J30
Open
Open
Open: MAX77958 slave address configured by J31, J32.
Closed: MAX77958 slave address is selected to be 0b0100110. Do not connect J31, J32.
Maxim Integrated
│ 4
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
Table 1. Jumper Connection and Switch Setting Guide (continued)
DEFAULT
CONNECTION
JUMPER
FEATURE
Open: MAX77958 slave address configured by J30, J32.
Closed: MAX77958 slave address is selected to be 0b0100111. Do not connect J30, J32.
J31
Open
Open: MAX77958 slave address configured by J30, J31.
J32
Closed
Closed: MAX77958 slave address is selected to 0b0100101 by connecting the
GPIO6 to GND. Default for GUI communication. Do not connect J30, J31.
All MAX77958 GPIO pins at J33 are available to connect externally. Some GPIOs
have reserved functionality. Refer to the MAX77958 data sheet for details.
J33
J34
J35
Open
Closed
Closed
Open: MAX77958 VIO1 is not powered.
Closed: MAX77958 VIO1 is powered.
Open: MAX77958 VIO2 is not powered.
Closed: MAX77958 VIO2 is powered.
Open: CC1 line is not connected to pullup or pulldown. Must open J8 for testing with
real USB Type-C adaptor.
J8
Open
Open
Close 1-2: CC1 is connected to RP to simulate a DFP has been connected to CC1.
Close 3-4: CC1 is connected to RD to simulate a UFP has been connected to CC1. J11
must be installed.
Open: CC2 line is not connected to pullup or pulldown. Must open J8 for testing with
real USB Type-C adaptor.
Close 1-2: CC2 is connected to RP to simulate a DFP has been connected to CC2.
Close 3-4: CC2 is connected to RD to simulate a UFP has been connected to CC2. J11
must be installed.
J10
Open: CC1 line is not connected to RA. Must open J8 for testing with real USB
Type-C adaptor.
Close 1-2: CC1 is connected to RA to simulate a cable when RA is connected.
J11 must be installed.
J12
Open
Open
Open: CC2 line is not connected to RA. Must open J8 for testing with real USB
Type-C adaptor.
Close 1-2: CC2 is connected to RA to simulate a cable when RA is connected.
J11 must be installed.
J14
Open: On-board RA and RD are not allowed.
Closed: On-board RA and RD are allowed.
J11
Closed
1-2
2
1-2: MAX77975/MAX77976 I C lines are connected to the host directly.
SW1
2
2
2-3: MAX77975/MAX77976 I C lines are connected to the MAX77958 I C master.
Default Options are in Bold
Maxim Integrated
│ 5
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
Windows Driver
Detailed Description of Hardware
After connecting the Micro-USB cable between your PC
The GUI allows for quick, easy, and thorough evaluation
of the MAX77975/MAX77976 and MAX77958. Every con-
trol in the GUI corresponds to a register in the MAX77975/
MAX77976 and MAX77958. Refer to the Register Map
section in the MAX77975/MAX77976 and MAX77958
data sheets for a complete description.
and the EV kit for the first time, wait for Windows to auto-
2
matically install the drivers for the USB to I C Interface.
Establish Communication
When the device is powered up by CHGIN or BATT input,
click Device > Connect to communicate to the IC. Figure
2 shows the correct detection result. Click Read and
Close to establish the connection.
Software Installation
The MAX77976EVKIT# GUI can be downloaded from
Maxim’s website at http://www.maximintegrated.com/
products/MAX77976 (under the Design Resources tab).
Save the EV kit software to a temporary folder and
decompress the ZIP file. Run the .EXE file and follow the
on-screen instructions to complete the installation.
Before configuring at any tab, click Read Once to make
sure all the displayed configurations are in sync with
the IC configuration state. Alternatively, click Start Auto
Read and set corresponding read frequency to keep this
page up to date at all times. Follow the guidance on the
MAX77975/MAX77976 IC data sheet for the detailed
usage of each register. When trying to write to a register
with the write button, disable the Auto Read feature.
Figure 2. Device > Connect Resulting Window
Maxim Integrated
│ 6
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
Top Tab
The Top tab displays the top-level configuration settings for the IC. Figure 3 shows the format of the Top tab. Information
is grouped by function and each is detailed separately. The masked top interrupt is not reflected on the IRQB pin, while
the unmasked interrupt is reflected on the IRQB pin. The Top Status Indicator section includes controls for the top-level
settings. The software reset command is 0xA5.
Figure 3. MAX77975/MAX77976 Top Tab
Maxim Integrated
│ 7
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
Interrupts/Status Tab
The Interrupts/Status tab displays the charger interrupt setting and status for the IC. Figure 4 shows the format of the
Interrupts/Status tab. The masked charger interrupt is not reflected on the IRQB pin, while the unmasked interrupt is
reflected on the IRQB pin.
Figure 4. MAX77975/MAX77976 Interrupt and Status
Maxim Integrated
│ 8
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
Details/STAT Tab
The Details/STAT tab displays the charger detailed status. Figure 5 shows the format of the Details/STAT tab. The
detailed status of the charger helps diagnose the state of the charger operation. Also, the detailed charger status is
the basis of the interrupt status. Refer to the description of the CHG_DTLS00/01/02 register in the data sheet for more
details. The tab also controls the STAT LED behavior.
Figure 5. MAX77975/MAX77976 Details and STAT
Maxim Integrated
│ 9
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
2) Connect a USB Type-C cable from a Type-C dual-
role port (source preferred) device to see whether the
MAX77958 detects CC Pin State Machine Detection
and configures input current limit correctly.
Configurations 0-13 Tabs
The Configurations 0-13 tabs display the charger config-
uration settings corresponding to registers CHG_CFG_00-
13. Figure 6 shows the format of the Configurations 0-3
tab as an example. Notice that the Configuration 1, 2, 3,
4, and 7 registers are locked by register Configuration
6. To unlock, set the Charger Settings Protection field
of Configuration 6 to Unlock 0x3 state, then click the
Write button. Click Read to make sure the change is
in place. After the unlock, all configuration registers can
be configured. To get started charging a battery with the
desired current setting, set Chgin Input Current Limit
in Configuration 9, then set Fast Charging Current in
Configuration 2, then set Mode = 5 in Configuration 0 to
switch from buck-only mode to charging mode.
USB Power Delivery Test
1) Source capability request function test.
2) Connect USB power delivery AC adapter to the EV
kit.
3) Use a volt-meter to monitor the voltage on VBUS.
4) Go to Command > Get SrcCap(0x31), click on Write
to execute the command, the MAX77958 sends this
command over the CC pin to the TA, and the TA pro-
vides a list of available source capabilities.
5) Review the source capabilities and make a note of the
desired PDO.
Test with MAX77958 and USB Type-C
Port Interface
6) Go to SrcCap Request (0x32), set the value of the
PDO, and press the Write button to change the BUS
voltage.
CC Detection Test
1) Connect a USB Type-C adapter to the EV kit and see
whether the MAX77958 detects SINK and configures
input current limit correctly.
Figure 6. MAX77975/MAX77976 Configurations
Maxim Integrated
│ 10
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
BC1.2 Charger Type Detection
1) Plug in the USB Type-A to Type-C cable from a BC1.2 adapter or other legacy port, check the Charger Detection
Status under the BC Status tab of the MAX77958 GUI, to see if the USBC detects the correct charger type.
Figure 7. CC Status after Connecting the USB Type-C Connector of EV Kit to a Travel Adapter (TA).
Figure 8. Get Source Capability (Get SrcCap) Under the Command Section
Figure 9. BC Status after Connecting the USB Type-C Connector of EV Kit to SDP
Maxim Integrated
│ 11
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
1) Follow the initial test setup to connect the GUI with
the MAX77975/MAX77976 EV kit.
Detailed Description of Firmware for
MAX77958
The firmware of MAX77958 consists of two main parts:
the core firmware and customization script.
2) Connect 3.8V to BATT, do not disconnect the EV kit from
the PC during the customization script block update.
3) Click on Tools in the menu bar and then go to CUS
Command Block Update.
The core firmware is compliant with the USB Type-C
1.3 and PD 3.0 specifications. The customization script
is based on the application system, giving more flex-
ibility for system design. It is based on the customiza-
tion script update, which can achieve functions such as
GPIO matrix control, charger configuration initialization,
etc. Future USB Type-C and PD specification changes
can be accommodated by updating the MAX77958 core
firmware. See the Core Firmware Update section of this
data sheet.
4) Click on the Open button in the pop-up window to
load the latest customization script, and then click on
Start to activate the customization script update.
5) Figure 11 shows the customization script update pro-
cess complete.
Core Firmware Update
1) Follow the initial test setup to connect the GUI with
the MAX77975/MAX77976 EV kit.
See the MAX77958 Customization Script Block Update
section and the MAX77958 Customization Script and
OPCode Command Guide for details about the custom-
ization script.
2) Connect 3.8V to BATT and do not disconnect the EV
kit from the PC during the firmware update.
3) Click on Tools in the menu bar and then go to
Firmware Update.
MAX77958 Customization Script Block Update
4) Click on the Open button in the pop-up window to
load the latest firmware. In the file select window, click
on the .bin file, and then select Start to activate the
firmware update.
The customization script defines the application-specific
behavior of the MAX77958. An example is setting the
input current limit of the charger when USB device detec-
tion is completed.
5) Figure 13 shows the firmware update process complete.
Figure 10. MAX77975/MAX77976 EV Kit GUI Customization
Script Block Update
Figure 12. MAX77975/MAX77976 EV Kit GUI Firmware Update
Figure 11. Customization Script Update Process Complete
Figure 13. Firmware Update Process Complete
Maxim Integrated
│ 12
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
Script Automation
Optional Tools
For I C-communication debugging, more tools are avail-
2
A Python-based script system is embedded in the GUI
software to allow automating or configuring multiple
registers sequentially with ease. To evaluate through
Python-based commands, click Tools > Run Script File.
A Script window pops up, as shown in Figure 14. The first
tab consists of a script editor and an embedded Python
terminal interface. The second tab provides a Python I/O
console. The help button provides a coding tutorial for this
script window. Click the Run button to execute the script.
The script feature helps with testing out a sequence of the
configuration automatically.
able at Options > CMOD Advanced UI. With the proper
test set-up procedure described in this document, these
tools do not need to be used to evaluate the MAX77975/
MAX77976. However, other slave devices can be tested
2
with the I C debugging tools and the GUI software when
connected to the MAX77975/MAX77976 with the SDA
and SCL pins. If successful, you can automate multiple
slave devices through the script window.
Figure 14. MAX77975/6 Script Window
Maxim Integrated
│ 13
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
Table 2. USB Acronyms
ACRONYM
BC1.2
CC
DESCRIPTION
Battery Charging 1.2
Configuration Channel
Charging Downstream Port
Dedicated Charging Port
Downstream Facing Port
CDP
DCP
DFP
2
MAXUSB
MTP
USB to I C translator
Multiple Time Programmable
Over Voltage Protection
Power Delivery
OVP
PD
PDO
Power Data Object
PPS
Programmable Power Supply
Standard Downstream Port
Upstream Facing Port
Vendor Defined Message
SDP
UFP
VDM
Ordering Information
PART
EVALUATES
TYPE
EV Kit
EV Kit
MAX77975EVKIT#
MAX77976EVKIT#
MAX77975, MAX77958
MAX77976, MAX77958
#Denotes RoHS compliant.
Maxim Integrated
│ 14
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
MAX77975 EV Kit Bill of Materials
ITEM
REF_DES
DNI/DNP
QTY
MFG PART #
MANUFACTURER
VALUE
DESCRIPTION
AVL1, BATSN, BATSP,
BATTS, BYPS, CC1,
CC2, CHGINS, DN, DN1,
DP, DP2, INTB1, SBU1,
SBU2, SCL1, SDA1, SYS1,
SYSS, VDD1P1, VDD1P8,
VIO, VIO1, VIO2
TEST POINT; PIN DIA = 0.1IN; TOTAL LENGTH = 0.3IN;
BOARD HOLE = 0.04IN; RED;
PHOSPHOR BRONZE WIRE SILVER PLATE FINISH;
1
—
24
5000
KEYSTONE
N/A
BATTN, BATTN1, BATTP,
BATTP1, BYP, CHGIN,
GND1-GND5, GND7, SYS
EVK KIT PARTS; MAXIM PAD; WIRE; NATURAL; SOLID;
WEICO WIRE; SOFT DRAWN BUS TYPE-S; 20AWG
2
—
13
9020 BUSS
WEICO WIRE
MURATA
MAXIMPAD
C1, C15, C18-C21,
C23-C29, C36
CAPACITOR; SMT (0402); CERAMIC CHIP; 0.1µF; 10V;
TOL = 5%; TG = -55°C TO +125°C; TC = X7R
3
4
5
6
7
—
—
—
—
—
14
1
GRM155R71A104JA01
0.1µF
2.2µF
1µF
C1608X5R1V225K080AC;
GRM188R6YA225KA12
TDK;
MURATA
CAPACITOR; SMT (0603); CERAMIC CHIP; 2.2µF; 35V;
TOL = 10%; TG = -55°C TO +85°C; TC = X5R
C2
C3, C4, C16,
C17, C30-C32
C0402C105K8PAC;
CC0402KRX5R6BB105
KEMET;
YAGEO
CAPACITOR; SMT (0402); CERAMIC CHIP; 1µF; 10V;
TOL = 10%; TG = -55°C TO +85°C; TC = X5R
7
C5, C33, C50,
C54, C55
5
CL05A105KO5NNN
SAMSUNG
TDK
1µF
CAP; SMT (0402); 1µF; 10%; 16V; X5R; CERAMIC CHIP
CAPACITOR; SMT (0805); CERAMIC CHIP; 10µF; 35V;
TOL = 10%; TG = -55°C TO +85°C; TC = X5R
C6, C10
2
C2012X5R1V106K125AC
10µF
CGA2B3X7R1H104K050BB;
C1005X7R1H104K050BB;
GRM155R71H104KE14;
GCM155R71H104KE02;
C1005X7R1H104K050BE;
UMK105B7104KV-FR;
TDK;TDK;
MURATA;MURATA;
TDK;TAIYO YUDEN;
TDK
CAPACITOR; SMT (0402); CERAMIC CHIP; 0.1µF;
50V; TOL = 10%; TG = -55°C TO +125°C; TC = X7R
8
C7
—
1
0.1µF
CGA2B3X7R1H104K050BE
SAMSUNG
ELECTRONICS
9
C8, C34
C9
—
—
—
2
1
4
CL10A226MO7JZNC
22µF
10µF
27PF
CAP; SMT (0603); 22µF; 20%; 16V; X5R; CERAMIC CHIP
CAPACITOR; SMT (0603); CERAMIC CHIP; 10µF; 16V;
TOL = 20%; MODEL = GRM SERIES;
TG = -55°C TO +85°C; TC = X5R
10
11
GRM188R61C106MA73
MURATA
C0402C0G500270JNP;
GRM1555C1H270JA01
VENKEL LTD.;
MURATA
CAPACITOR; SMT; 0402; CERAMIC; 27pF; 50V; 5%; C0G;
-55°C to + 125°C; 0 ±30PPM/°C
C11, C14, C43, C44
ZRB15XR61A475ME01;
CL05A475MP5NRN;
GRM155R61A475MEAA;
C1005X5R1A475M050BC
MURATA;
SAMSUNG;
MURATA;TDK
CAPACITOR; SMT (0402); CERAMIC CHIP; 4.7µF; 10V;
TOL = 20%; TG = -55°C TO +85°C; TC = X5R
12
13
C12, C13, C22
—
—
3
1
4.7µF
C0402C103K5RAC;
GRM155R71H103KA88;
C1005X7R1H103K050BE;
CL05B103KB5NNN;
KEMET;
MURATA;TDK;
SAMSUNG
ELECTRONIC;
TAIYO YUDEN
CAPACITOR; SMT (0402); CERAMIC CHIP; 0.01µF; 50V;
TOL = 10%; TG = -55°C TO +125°C; TC = X7R
C35
0.01µF
UMK105B7103KV
CAPACITOR; SMT (1210); CERAMIC CHIP; 100µF; 16V;
TOL = 20%; TG = -55°C TO +85°C; TC = X5R
14
15
16
C37-C40
C41
—
—
4
1
1
EMK325ABJ107MM
GRM32ER60J227ME05
EEE-FK1V101P
TAIYO YUDEN
MURATA
100µF
220µF
100µF
CAP; SMT (1210); 220µF; 20%; 6.3V; X5R; CERAMIC CHIP
CAPACITOR; SMT (CASE_F); ALUMINUM-ELECTROLYTIC;
100µF; 35V; TOL = 20%; TG = -55°C TO +105°C; AUTO
C42
DNI
PANASONIC
GRM188R71A225KE15;
CL10B225KP8NNN;
C1608X7R1A225K080AC;
C0603C225K8RAC
MURATA;
SAMSUNG;
TDK;KEMET
CAPACITOR; SMT (0603); CERAMIC CHIP; 2.2µF; 10V;
TOL = 10%; TG = -55°C TO +125°C; TC = X7R
17
18
C46
—
—
1
2
2.2µF
1µF
CAPACITOR; SMT (0402); CERAMIC CHIP; 1µF; 6.3V;
TOL = 10%; MODEL = ; TG = -55°C TO +85°C; TC = X5R;
C47, C51
ANY
ANY
Maxim Integrated
│ 15
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
MAX77975 EV Kit Bill of Materials (continued)
ITEM
REF_DES
DNI/DNP
QTY
MFG PART #
MANUFACTURER
VALUE
1µF
DESCRIPTION
CAPACITOR; SMT (0402); CERAMIC CHIP; 1µF; 35V;
TOL = 10%; TG = -55°C TO +85°C; TC = X5R
19
C52
—
1
C1005X5R1V105K050BC
TDK
20
21
D1
D3
—
—
1
1
PTVS20VS1UR
NEXPERIA
AVX
20V
DIODE; TVS; SMT (SOD-123W); VRM = 20V; IPP = 12.3A
SD2114S040S8R0
SD2114S040S8R0 DIODE; SCH; SMB (DO-214AA); PIV = 40V; IF = 8A
EVKIT PART-DIODE; TVS; SMT (SOD962-2);
VRM = ±4V; IPP = N/A
22
23
D8, D9
—
—
2
9
PESD4V0W1BSF
5002
NEXPERIA
KEYSTONE
4V
DISQBAT, EXTSM, IRQB,
IRQB53, QBEXT, SCL,
SDA, STAT, SUSPND
TEST POINT; PIN DIA = 0.1IN; TOTAL LENGTH = 0.3IN;
BOARD HOLE = 0.04IN; WHITE;
PHOSPHOR BRONZE WIRE SILVER;
N/A
LITE-ON
ELECTRONICS INC.
DIODE; LED; STANDARD; RED; SMT (0603); PIV = 5.0V;
IF = 0.04A; -55°C TO +85°C
24
25
DS1-DS3
—
—
3
3
LTST-C190CKT
5010
LTST-C190CKT
N/A
TEST POINT; PIN DIA = 0.125IN; TOTAL LENGTH = 0.445IN;
BOARD HOLE = 0.063IN; RED; PHOSPHOR BRONZE WIRE SIL;
EXTVIO, PVDD, VDD
KEYSTONE
KEYSTONE
TEST POINT; PIN DIA = 0.1IN; TOTAL LENGTH = 0.3IN;
BOARD HOLE = 0.04IN; BLACK;
PHOSPHOR BRONZE WIRE SILVER PLATE FINISH;
GNDS, PGNDS,
SYSGNDS
26
—
3
5001
N/A
CONNECTOR; FEMALE; SMT; MICRO USB B TYPE
RECEPTACLE; RIGHT ANGLE; 5PINS
27
28
J1
J2
—
—
1
1
10118193-0001LF
12401832E402A
FCI CONNECT
AMPHENOL
10118193-0001LF
12401832E402A
CONNECTOR; FEMALE; SMT; USB TYPE C CONNECTOR;
RIGHT ANGLE; DUAL ROW; 24PINS
J3, J4, J9, J11,
J12, J14, J16,
J30-J32, J34, J35
CONNECTOR; THROUGH HOLE; TSW SERIES; SINGLE ROW;
STRAIGHT; 2PINS; -55°C TO +105°C
29
—
12
TSW-102-07-T-S
SAMTEC
TSW-102-07-T-S
SULLINS
ELECTRONICS CORP.
CONNECTOR; MALE; THROUGH HOLE; BREAKAWAY;
STRAIGHT; 8PINS; -65°C TO +125°C
30
31
J5, J20
—
—
2
3
PBC04DAAN
PEC03SAAN
PBC04DAAN
PEC03SAAN
SULLINS
ELECTRONICS CORP.
EVKIT PART-CONNECTOR; MALE; THROUGH HOLE;
BREAKAWAY; STRAIGHT; 3PINS; -65°C TO +125°C;
J7, J8, J10
J13, J17, J18,
J21, J22, J29,
J36, J37
SULLINS
ELECTRONICS CORP.
CONNECTOR; MALE; THROUGH HOLE;
BREAKAWAY; STRAIGHT; 2PINS
32
—
8
PBC02SAAN
PBC02SAAN
SULLINS
ELECTRONICS CORP.
CONNECTOR; MALE; THROUGH HOLE; BREAKAWAY;
STRAIGHT; 4PINS
33
34
35
36
37
J15, J23
J33
—
—
—
—
—
2
1
1
3
4
PBC02DAAN
PBC09SAAN
PBC02DAAN
PBC09SAAN
1µH
SULLINS
ELECTRONICS CORP.
CONNECTOR; MALE; THROUGH HOLE; BREAKAWAY;
STRAIGHT; 9PINS; -65°C TO +125°C
INDUCTOR; SMT; IHLP SERIES; 1µH;
TOL = ±20%; 7A; -55°C TO +125°C
L1
IHLP2020BZER1R0M11
BLM18AG601SN1
9032
VISHAY DALE
MURATA
INDUCTOR; SMT (0603); FERRITE-BEAD; 600;
TOL = ±; 0.5A
L2-L4
MH1-MH4
600
MACHINE FABRICATED; ROUND-THRU HOLE SPACER;
NO THREAD; M3.5; 5/8IN; NYLON
KEYSTONE
9032
CONNECTOR; MALE; USB; USB2.0 MICRO
CONNECTION CABLE; USB B MICRO MALE TO
USB A MALE; STRAIGHT; 5PINS-4PINS
38
MISC1
—
1
AK67421-1-R
ASSMANN
AK67421-1-R
ALPHA & OMEGA
SEMICONDUCTOR
TRAN; N-CHANNEL ALPHAMOS; NCH; DFN8-EP;
PD-(83W); I-(150A); V-(30V)
39
40
Q1, Q2
—
—
2
AON6512
AON6512
0
R1, R7, R14-R16,
R18, R22,
R32-R34, R44
RESISTOR; 0402; 0Ω; 0%; JUMPER; 0.10W;
THICK FILM
11
ERJ-2GE0R00
PANASONIC
Maxim Integrated
│ 16
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
MAX77975 EV Kit Bill of Materials (continued)
ITEM
REF_DES
DNI/DNP
QTY
MFG PART #
MANUFACTURER
VALUE
DESCRIPTION
CRCW060310K0FK;
ERJ-3EKF1002
VISHAY DALE;
PANASONIC
41
R2, R42
—
2
10K
RESISTOR; 0603; 10K; 1%; 100PPM; 0.10W; THICK FILM
42
43
R4, R6
—
—
2
2
ERJ-2RKF6493
ERJ-2RKF1203
PANASONIC
PANASONIC
649K
120K
RESISTOR; 0402; 649KΩ; 1%; 100PPM; 0.1W; THICK FILM
RESISTOR; 0402; 120KΩ; 1%; 100PPM; 0.1W; THICK FILM
R5, R64
VISHAY DALE;
ROHM
CRCW040212K0FK;
MCR01MZPF1202
44
R8
—
1
12K
RESISTOR, 0402, 12KΩ, 1%, 100PPM, 0.0625W, THICK FILM
SEMICONDUCTOR
ERJ-2RKF27R0X;
RC0402FR-0727RL;
CRCW040227R0FK
PANASONIC;
YAGEO PHICOMP;
VISHAY DALE
45
46
R9, R13
R10
—
—
—
2
1
4
27
1M
1K
RESISTOR, 0402, 27Ω, 1%, 100PPM, 0.0625W, THICK FILM
RESISTOR; 0402; 1M; 1%; 100PPM; 0.0625W; THICK FILM
RESISTOR; 0402; 1K; 1%; 100PPM; 0.0625W; THICK FILM
CRCW04021M00FK
VISHAY DALE
CRCW04021K00FK;
RC0402FR-071KL;
MCR01MZPF1001
VISHAY DALE;
YAGEO PHICOMP;
ROHM SEMI
R11, R36,
R37, R45
47
48
49
R12, R21
R17
—
—
2
1
CRCW04022K20JN
VISHAY DALE
2.2K
RESISTOR; 0402; 2.2KΩ; 5%; 200PPM; 0.063W; METAL FILM
CRCW04024752FK;
9C04021A4752FLHF3;
CRCW040247K5FK
VISHAY DALE;
YAGEO;
47.5K
RESISTOR; 0402; 47.5K; 1%; 100PPM; 0.0625W; THICK FILM
VISHAY DALE
R19, R20, R23,
R31, R41
CRCW0402100KFK;
RC0402FR-07100KL
50
51
52
—
—
—
5
2
2
VISHAY;YAGEO
VISHAY DALE;YAGEO
PANASONIC
100K
10
RESISTOR; 0402; 100K; 1%; 100PPM; 0.0625W; THICK FILM
RESISTOR; 0402; 10Ω; 1%; 100PPM; 0.0625W; THICK FILM
RESISTOR, 0402, 56KΩ, 1%, 100PPM, 0.0625W, THICK FILM
CRCW040210R0FK;
9C04021A10R0FL
R24, R38
R25, R29
ERJ-2RKF5602
56K
VISHAY DALE;
KOA SPEER
CRCW0402200KFK;
RF73H1ELTP2003
53
54
R26, R48
R27, R28
—
—
2
2
200K
4.7K
RESISTOR; 0402; 200K; 1%; 100PPM; 0.0625W; THICK FILM
ELECTRONICS
VISHAY DALE;
ROHM
CRCW04024K70FK;
MCR01MZPF4701
RESISTOR, 0402, 4.7KΩ, 1%, 100PPM, 0.0625W, THICK FILM
SEMICONDUCTOR
55
56
R30
R35
—
—
1
1
CRCW0402169KFK
CRCW0402470RFK
VISHAY DALE
VISHAY DALE
169K
470
RESISTOR; 0402; 169KΩ; 1%; 100PPM; 0.063W; THICK FILM
RESISTOR, 0402, 470Ω, 1%, 100PPM, 0.0625W, THICK FILM
RESISTOR; 0402; 5.1K; 1%; 100PPM; 0.0625W; THICK FILM
57
58
59
60
R39, R40
R43
—
—
—
—
2
1
4
2
CRCW04025K10FK
3296Y-1-104LF
VISHAY DALE
BOURNS
5.1K
100K
0
RESISTOR; THROUGH HOLE-RADIAL LEAD;
3296 SERIES; 100KΩ; 10%; 100PPM; 0.5W
R49, R50,
R59, R60
CRCW06030000Z0EAHP
CRCW04021R00FK
VISHAY DRALORIC
VISHAY DALE
RESISTOR; 0603; 0Ω; 0%; JUMPER; 0.25W; THICK FILM
RESISTOR, 0402, 1Ω, 1%, 100PPM, 0.0625W, THICK FILM
R51, R52
1
Maxim Integrated
│ 17
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
MAX77975 EV Kit Bill of Materials (continued)
ITEM
REF_DES
DNI/DNP
QTY
MFG PART #
MANUFACTURER
VALUE
DESCRIPTION
CRCW04022K20FK;
RC0402FR-072K2L
VISHAY DALE;
YAGEO PHICOMP
61
R55, R57
—
2
2.2K
RESISTOR, 0402, 2.2KΩ, 1%, 100PPM, 0.0625W, THICK FILM
62
63
R66, R67
RT1
—
—
2
1
CRCW0402330KFK
NTCG163JF103F
VISHAY DALE
TDK
330K
10K
RESISTOR, 0402, 330KΩ, 1%, 100PPM, 0.0625W, THICK FILM
THERMISTOR; SMT (0603); THICK FILM (NICKEL PLATED);
10K; TOL = ±1%
SWITCH; DPDT; THROUGH HOLE; 12V; 0.2A; ON-ON;
RCOIL = 0.05Ω; RINSULATION = 10MΩ;
COPAL ELECTRONICS INC.; -40°C TO +85°C
COPAL
ELECTRONICS INC.
64
65
SW1
SW2
—
—
1
1
CL-SB-22C-02
EVQ-Q2K03W
CL-SB-22C-02
EVQ-Q2K03W
SWITCH; SPST; SMT; 15V; 0.02A; LIGHT TOUCH SWITCH;
RCOIL = Ω; RINSULATION = Ω; PANASONIC
PANASONIC
MAXIM
EVKIT PART - IC; MAX77975; 19V INPUT;
5.5A BUCK CHARGER FOR 1S LI-ION BATTERY;
PACK; PACKAGE OUTLINE DRAWING 21-100411;
LAND PATTERN DRAWING: 90-100145;
66
67
U1
U2
—
—
1
1
MAX77975
FT2232HL
MAX77975
FT2232HL
PACKAGE CODE: F234A4F-1 FCQFN32
FUTURE
TECHNOLOGY
DEVICES INTL LTD.
IC; MMRY; DUAL HIGH SPEED USB TO
MULTIPURPOSE UART/FIFO; LQFP64
IC; ASW; CMOS LINEAR INTEGRATED CIRCUIT
SILICON MONOLITHIC; WLCSP6
68
69
70
U3
U4
—
—
—
1
1
2
TCK402G
TOSHIBA
MAXIM
TCK402G
IC; TRANS; QUAD BIDIRECTIONAL LOW-VOLTAGE
LOGIC LEVEL TRANSLATOR; TDFN14-EP
MAX14611ETD+
MAX8512EXK+
MAX14611ETD+
MAX8512EXK
IC, VREG, Ultra-Low-Noise, High PSRR,
Adjustable Vout, SC70-5
U5, U6
MAXIM
EVKIT PART - IC; USB TYPE-C AND USB PD
71
U7
—
1
MAX77958EWV+T
MAXIM
MAX77958EWV+T CONTROLLER; WLP30; 0.5MM PITCH; PACKAGE
OUTLINE: 21-0069; PACKAGE CODE: W302A3+2
72
73
Y1
PCB
D2
—
1
1
7M-12.000MAAJ
MAX77976
ESD9X3.3ST5G
N/A
TXC CORPORATION
MAXIM
12MHZ
PCB
CRYSTAL; SMT; 18PF; 12MHZ; ±30PPM; ±30PPM
PCB:MAX77976
—
74
DNP
DNP
0
ON SEMICONDUCTOR
N/A
3.3V
DIODE; TVS; SMT (SOD-923); VRM = 3.3V; IPP = 9.8A
RESISTOR; 0402; OPEN; FORMFACTOR
75
R3
0
OPEN
TOTAL
219
Maxim Integrated
│ 18
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
MAX77976 EV Kit Bill of Materials
ITEM
REF_DES
DNI/DNP
QTY
MFG PART #
MANUFACTURER
VALUE
DESCRIPTION
AVL1, BATSN, BATSP,
BATTS, BYPS, CC1,
CC2, CHGINS, DN, DN1,
DP, DP2, INTB1, SBU1,
SBU2, SCL1, SDA1, SYS1,
SYSS, VDD1P1, VDD1P8,
VIO, VIO1, VIO2
TEST POINT; PIN DIA = 0.1IN; TOTAL LENGTH = 0.3IN;
BOARD HOLE = 0.04IN; RED; PHOSPHOR BRONZE
WIRE SILVER PLATE FINISH;
1
—
24
5000
KEYSTONE
N/A
BATTN, BATTN1, BATTP,
BATTP1, BYP, CHGIN,
GND1-GND5, GND7, SYS
EVK KIT PARTS; MAXIM PAD; WIRE; NATURAL;
SOLID; WEICO WIRE; SOFT DRAWN BUS TYPE-S; 20AWG
2
—
13
9020 BUSS
WEICO WIRE
MAXIMPAD
C1, C15, C18-C21,
C23-C29, C36
CAPACITOR; SMT (0402); CERAMIC CHIP; 0.1µF; 10V;
TOL = 5%; TG = -55°C TO +125°C; TC = X7R
3
4
—
—
14
1
GRM155R71A104JA01
MURATA
0.1µF
2.2µF
C1608X5R1V225K080AC;
GRM188R6YA225KA12
CAPACITOR; SMT (0603); CERAMIC CHIP; 2.2µF; 35V;
TOL = 10%; TG = -55°C TO +85°C; TC = X5R
C2
TDK;MURATA
C3, C4, C16,
C17, C30-C32
C0402C105K8PAC;
CC0402KRX5R6BB105
CAPACITOR; SMT (0402); CERAMIC CHIP; 1µF; 10V;
TOL = 10%; TG = -55°C TO +85°C; TC = X5R
5
6
7
—
—
—
7
5
2
KEMET;YAGEO
SAMSUNG
TDK
1µF
1µF
C5, C33, C50, C54, C55
C6, C10
CL05A105KO5NNN
CAP; SMT (0402); 1µF; 10%; 16V; X5R; CERAMIC CHIP
CAPACITOR; SMT (0805); CERAMIC CHIP; 10µF; 35V;
TOL = 10%; TG = -55°C TO +85°C; TC = X5R
C2012X5R1V106K125AC
10µF
CGA2B3X7R1H104K050BB;
C1005X7R1H104K050BB;
GRM155R71H104KE14;
GCM155R71H104KE02;
C1005X7R1H104K050BE;
UMK105B7104KV-FR;
TDK;TDK;
MURATA;
MURATA;TDK;
TAIYO YUDEN;
TDK
CAPACITOR; SMT (0402); CERAMIC CHIP; 0.1µF;
50V; TOL = 10%; TG = -55°C TO +125°C; TC = X7R
8
C7
—
1
0.1µF
CGA2B3X7R1H104K050BE
SAMSUNG
ELECTRONICS
9
C8, C34
C9
—
—
—
2
1
4
CL10A226MO7JZNC
22µF
10µF
27PF
CAP; SMT (0603); 22µF; 20%; 16V; X5R; CERAMIC CHIP
CAPACITOR; SMT (0603); CERAMIC CHIP; 10µF; 16V; TOL = 20%;
MODEL = GRM SERIES; TG = -55°C TO +85°C; TC = X5R
10
11
GRM188R61C106MA73
MURATA
C0402C0G500270JNP;
GRM1555C1H270JA01
VENKEL LTD.;
MURATA
CAPACITOR; SMT; 0402; CERAMIC; 27pF; 50V; 5%; C0G;
-55°C to + 125°C; 0 ±30PPM/°C
C11, C14, C43, C44
ZRB15XR61A475ME01;
CL05A475MP5NRN;
GRM155R61A475MEAA;
C1005X5R1A475M050BC
MURATA;
SAMSUNG;
MURATA;TDK
CAPACITOR; SMT (0402); CERAMIC CHIP; 4.7µF; 10V;
TOL = 20%; TG = -55°C TO +85°C; TC = X5R
12
13
C12, C13, C22
—
—
3
1
4.7µF
C0402C103K5RAC;
GRM155R71H103KA88;
C1005X7R1H103K050BE;
CL05B103KB5NNN;
KEMET;
MURATA;TDK;
SAMSUNG
ELECTRONIC;
TAIYO YUDEN
CAPACITOR; SMT (0402); CERAMIC CHIP; 0.01µF; 50V;
TOL = 10%; TG = -55°C TO +125°C; TC = X7R
C35
0.01µF
UMK105B7103KV
CAPACITOR; SMT (1210); CERAMIC CHIP; 100µF; 16V;
TOL = 20%; TG = -55°C TO +85°C; TC = X5R
14
15
16
C37-C40
C41
—
—
4
1
1
EMK325ABJ107MM
GRM32ER60J227ME05
EEE-FK1V101P
TAIYO YUDEN
MURATA
100µF
220µF
100µF
CAP; SMT (1210); 220UF; 20%; 6.3V; X5R; CERAMIC CHIP
CAPACITOR; SMT (CASE_F); ALUMINUM-ELECTROLYTIC;
100µF; 35V; TOL = 20%; TG = -55°C TO +105°C; AUTO
C42
DNI
PANASONIC
GRM188R71A225KE15;
CL10B225KP8NNN;
C1608X7R1A225K080AC;
C0603C225K8RAC
MURATA;
SAMSUNG;TDK;
KEMET
CAPACITOR; SMT (0603); CERAMIC CHIP; 2.2µF; 10V;
TOL = 10%; TG = -55°C TO +125°C; TC = X7R
17
18
C46
—
—
1
2
2.2µF
1µF
CAPACITOR; SMT (0402); CERAMIC CHIP; 1µF; 6.3V;
TOL = 10%; MODEL = ; TG = -55°C TO +85°C; TC = X5R;
C47, C51
ANY
ANY
CAPACITOR; SMT (0402); CERAMIC CHIP; 1µF; 35V;
TOL = 10%; TG = -55°C TO +85°C; TC = X5R
19
20
C52
D1
—
—
1
1
C1005X5R1V105K050BC
PTVS20VS1UR
TDK
1µF
20V
NEXPERIA
DIODE; TVS; SMT (SOD-123W); VRM = 20V; IPP = 12.3A
Maxim Integrated
│ 19
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
MAX77976 EV Kit Bill of Materials (continued)
ITEM
21
REF_DES
D3
DNI/DNP
QTY
MFG PART #
SD2114S040S8R0
PESD4V0W1BSF
MANUFACTURER
AVX
VALUE
SD2114S040S8R0
4V
DESCRIPTION
—
—
1
2
DIODE; SCH; SMB (DO-214AA); PIV = 40V; IF = 8A
EVKIT PART-DIODE; TVS; SMT (SOD962-2); VRM = ±4V; IPP = N/A
22
D8, D9
NEXPERIA
DISQBAT, EXTSM, IRQB,
IRQB53, QBEXT, SCL,
SDA, STAT, SUSPND
TEST POINT; PIN DIA = 0.1IN; TOTAL LENGTH = 0.3IN;
BOARD HOLE = 0.04IN; WHITE;
23
—
9
5002
KEYSTONE
N/A
PHOSPHOR BRONZE WIRE SILVER;
LITE-ON
DIODE; LED; STANDARD; RED; SMT (0603); PIV = 5.0V;
IF = 0.04A; -55°C TO +85°C
24
25
DS1-DS3
—
—
3
3
LTST-C190CKT
5010
LTST-C190CKT
N/A
ELECTRONICS INC.
TEST POINT; PIN DIA = 0.125IN; TOTAL LENGTH = 0.445IN;
BOARD HOLE = 0.063IN; RED; PHOSPHOR BRONZE WIRE SIL;
EXTVIO, PVDD, VDD
KEYSTONE
KEYSTONE
TEST POINT; PIN DIA = 0.1IN; TOTAL LENGTH = 0.3IN;
BOARD HOLE = 0.04IN; BLACK; PHOSPHOR BRONZE
WIRE SILVER PLATE FINISH;
GNDS, PGNDS,
SYSGNDS
26
—
3
5001
N/A
CONNECTOR; FEMALE; SMT; MICRO USB B TYPE
RECEPTACLE; RIGHT ANGLE; 5PINS
27
28
J1
J2
—
—
1
1
10118193-0001LF
12401832E402A
FCI CONNECT
AMPHENOL
10118193-0001LF
12401832E402A
CONNECTOR; FEMALE; SMT; USB TYPE C CONNECTOR;
RIGHT ANGLE; DUAL ROW; 24PINS
J3, J4, J9, J11, J12,
J14, J16, J30-J32,
J34, J35
CONNECTOR; THROUGH HOLE; TSW SERIES; SINGLE ROW;
STRAIGHT; 2PINS; -55°C TO +105°C
29
—
12
TSW-102-07-T-S
SAMTEC
TSW-102-07-T-S
SULLINS
CONNECTOR; MALE; THROUGH HOLE; BREAKAWAY;
STRAIGHT; 8PINS; -65°C TO +125°C
30
31
32
33
34
J5, J20
—
—
—
—
—
2
3
8
2
1
PBC04DAAN
PEC03SAAN
PBC02SAAN
PBC02DAAN
PBC09SAAN
PBC04DAAN
PEC03SAAN
PBC02SAAN
PBC02DAAN
PBC09SAAN
ELECTRONICS CORP.
SULLINS
EVKIT PART-CONNECTOR; MALE; THROUGH HOLE;
BREAKAWAY; STRAIGHT; 3PINS; -65°C TO +125°C;
J7, J8, J10
ELECTRONICS CORP.
J13, J17, J18, J21,
J22, J29, J36, J37
SULLINS
CONNECTOR; MALE; THROUGH HOLE;
BREAKAWAY; STRAIGHT; 2PINS
ELECTRONICS CORP.
SULLINS
CONNECTOR; MALE; THROUGH HOLE;
BREAKAWAY; STRAIGHT; 4PINS
J15, J23
J33
ELECTRONICS CORP.
SULLINS
CONNECTOR; MALE; THROUGH HOLE; BREAKAWAY;
STRAIGHT; 9PINS; -65°C TO +125°C
ELECTRONICS CORP.
INDUCTOR; SMT; IHLP SERIES; 1µH;
35
36
37
L1
—
—
—
1
3
4
IHLP2020BZER1R0M11
BLM18AG601SN1
9032
VISHAY DALE
MURATA
1UH
600
TOL = ±20%; 7A; -55°C TO +125°C
L2-L4
INDUCTOR; SMT (0603); FERRITE-BEAD; 600; TOL = ±; 0.5A
MACHINE FABRICATED; ROUND-THRU HOLE SPACER;
NO THREAD; M3.5; 5/8IN; NYLON
MH1-MH4
KEYSTONE
9032
CONNECTOR; MALE; USB; USB2.0 MICRO CONNECTION CABLE;
USB B MICRO MALE TO USB A MALE; STRAIGHT; 5PINS-4PINS
38
39
40
41
MISC1
Q1, Q2
—
—
—
—
1
2
AK67421-1-R
AON6512
ASSMANN
AK67421-1-R
ALPHA &
TRAN; N-CHANNEL ALPHAMOS; NCH; DFN8-EP;
PD-(83W); I-(150A); V-(30V)
AON6512
OMEGA SEMICONDUCTOR
R1, R7, R14-R16,
11
2
ERJ-2GE0R00
PANASONIC
0
RESISTOR; 0402; 0Ω; 0%; JUMPER; 0.10W; THICK FILM
R18, R22, R32-R34, R44
CRCW060310K0FK;
ERJ-3EKF1002
VISHAY DALE;
PANASONIC
R2, R42
10K
RESISTOR; 0603; 10K; 1%; 100PPM; 0.10W; THICK FILM
42
43
R4, R6
—
—
2
2
ERJ-2RKF6493
ERJ-2RKF1203
PANASONIC
PANASONIC
649K
120K
RESISTOR; 0402; 649KΩ; 1%; 100PPM; 0.1W; THICK FILM
RESISTOR; 0402; 120KΩ; 1%; 100PPM; 0.1W; THICK FILM
R5, R64
CRCW040212K0FK;
MCR01MZPF1202
VISHAY DALE;
44
R8
—
1
12K
RESISTOR, 0402, 12KΩ, 1%, 100PPM, 0.0625W, THICK FILM
ROHM SEMICONDUCTOR
ERJ-2RKF27R0X;
RC0402FR-0727RL;
CRCW040227R0FK
PANASONIC;
YAGEO PHICOMP;
VISHAY DALE
45
R9, R13
—
2
27
RESISTOR, 0402, 27Ω, 1%, 100PPM, 0.0625W, THICK FILM
Maxim Integrated
│ 20
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
MAX77976 EV Kit Bill of Materials (continued)
ITEM
REF_DES
DNI/DNP
QTY
MFG PART #
MANUFACTURER
VALUE
DESCRIPTION
46
R10
—
1
CRCW04021M00FK
VISHAY DALE
1M
RESISTOR; 0402; 1M; 1%; 100PPM; 0.0625W; THICK FILM
CRCW04021K00FK;
RC0402FR-071KL;
MCR01MZPF1001
VISHAY DALE;
YAGEO PHICOMP;
ROHM SEMI
47
48
49
R11, R36, R37, R45
R12, R21
—
—
—
4
2
1
1K
RESISTOR; 0402; 1K; 1%; 100PPM; 0.0625W; THICK FILM
RESISTOR; 0402; 2.2KΩ; 5%; 200PPM; 0.063W; METAL FILM
RESISTOR; 0402; 47.5K; 1%; 100PPM; 0.0625W; THICK FILM
CRCW04022K20JN
VISHAY DALE
2.2K
47.5K
CRCW04024752FK;
9C04021A4752FLHF3;
CRCW040247K5FK
VISHAY DALE;
YAGEO;
VISHAY DALE
R17
R19, R20,
R23, R31, R41
CRCW0402100KFK;
RC0402FR-07100KL
50
—
5
VISHAY;YAGEO
100K
RESISTOR; 0402; 100K; 1%; 100PPM; 0.0625W; THICK FILM
CRCW040210R0FK;
9C04021A10R0FL
51
52
R24, R38
R25, R29
—
—
2
2
VISHAY DALE;YAGEO
PANASONIC
10
RESISTOR; 0402; 10Ω; 1%; 100PPM; 0.0625W; THICK FILM
RESISTOR, 0402, 56KΩ, 1%, 100PPM, 0.0625W, THICK FILM
ERJ-2RKF5602
56K
VISHAY DALE;
KOA SPEER
ELECTRONICS
CRCW0402200KFK;
RF73H1ELTP2003
53
54
R26, R48
R27, R28
—
—
2
2
200K
4.7K
RESISTOR; 0402; 200K; 1%; 100PPM; 0.0625W; THICK FILM
VISHAY DALE;
ROHM
SEMICONDUCTOR
CRCW04024K70FK;
MCR01MZPF4701
RESISTOR, 0402, 4.7KΩ, 1%, 100PPM, 0.0625W, THICK FILM
55
56
57
R30
R35
—
—
—
1
1
2
CRCW0402169KFK
CRCW0402470RFK
CRCW04025K10FK
VISHAY DALE
VISHAY DALE
VISHAY DALE
169K
470
RESISTOR; 0402; 169KΩ; 1%; 100PPM; 0.063W; THICK FILM
RESISTOR, 0402, 470Ω, 1%, 100PPM, 0.0625W, THICK FILM
RESISTOR; 0402; 5.1K; 1%; 100PPM; 0.0625W; THICK FILM
R39, R40
5.1K
RESISTOR; THROUGH HOLE-RADIAL LEAD; 3296 SERIES;
100KΩ; 10%; 100PPM; 0.5W
58
R43
—
1
3296Y-1-104LF
BOURNS
100K
59
60
R49, R50, R59, R60
R51, R52
—
—
4
2
CRCW06030000Z0EAHP
CRCW04021R00FK
VISHAY DRALORIC
VISHAY DALE
0
1
RESISTOR; 0603; 0Ω; 0%; JUMPER; 0.25W; THICK FILM
RESISTOR, 0402, 1Ω, 1%, 100PPM, 0.0625W, THICK FILM
CRCW04022K20FK;
RC0402FR-072K2L
VISHAY DALE;
YAGEO PHICOMP
61
62
63
R55, R57
R66, R67
RT1
—
—
—
2
2
1
2.2K
330K
10K
RESISTOR, 0402, 2.2KΩ, 1%, 100PPM, 0.0625W, THICK FILM
RESISTOR, 0402, 330KΩ, 1%, 100PPM, 0.0625W, THICK FILM
CRCW0402330KFK
NTCG163JF103F
VISHAY DALE
TDK
THERMISTOR; SMT (0603); THICK FILM (NICKEL PLATED);
10K; TOL = ±1%
SWITCH; DPDT; THROUGH HOLE; 12V; 0.2A; ON-ON;
RCOIL = 0.05Ω; RINSULATION = 10MΩ;
COPAL ELECTRONICS INC.; -40°C TO +85°C
COPAL
ELECTRONICS INC.
64
65
SW1
SW2
—
—
1
1
CL-SB-22C-02
EVQ-Q2K03W
CL-SB-22C-02
EVQ-Q2K03W
SWITCH; SPST; SMT; 15V; 0.02A; LIGHT TOUCH SWITCH;
RCOIL = Ω; RINSULATION = Ω; PANASONIC
PANASONIC
MAXIM
EVKIT PART - IC; MAX77976; 19V INPUT; 5.5A BUCK
CHARGER FOR 1S LI-ION BATTERY; PACK; PACKAGE OUTLINE
DRAWING 21-100411; LAND PATTERN DRAWING: 90-100145;
PACKAGE CODE: F234A4F-1 FCQFN32
66
U1
—
1
MAX77976
MAX77976
FUTURE TECHNOLOGY
DEVICES INTL LTD.
IC; MMRY; DUAL HIGH SPEED USB TO MULTIPURPOSE
UART/FIFO; LQFP64
67
68
U2
U3
—
—
1
1
FT2232HL
TCK402G
FT2232HL
TCK402G
IC; ASW; CMOS LINEAR INTEGRATED CIRCUIT SILICON
MONOLITHIC; WLCSP6
TOSHIBA
IC; TRANS; QUAD BIDIRECTIONAL LOW-VOLTAGE LOGIC LEVEL
TRANSLATOR; TDFN14-EP
69
70
U4
—
—
1
2
MAX14611ETD+
MAX8512EXK+
MAXIM
MAXIM
MAX14611ETD+
MAX8512EXK
U5, U6
IC, VREG, Ultra-Low-Noise, High PSRR, Adjustable Vout, SC70-5
EVKIT PART - IC; USB TYPE-C AND USB PD CONTROLLER;
WLP30; 0.5MM PITCH; PACKAGE OUTLINE: 21-0069;
PACKAGE CODE: W302A3+2
71
U7
—
1
MAX77958EWV+T
MAXIM
MAX77958EWV+T
TXC
CORPORATION
72
Y1
—
1
7M-12.000MAAJ
12MHZ
CRYSTAL; SMT; 18PF; 12MHZ; ±30PPM; ±30PPM
73
74
PCB
D2
—
1
0
MAX77976
ESD9X3.3ST5G
N/A
MAXIM
ON SEMICONDUCTOR
N/A
PCB
3.3V
PCB:MAX77976
DNP
DNP
DIODE; TVS; SMT (SOD-923); VRM = 3.3V; IPP = 9.8A
RESISTOR; 0402; OPEN; FORMFACTOR
75
R3
0
OPEN
TOTAL
219
Maxim Integrated
│ 21
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
MAX77975/MAX77976 EV Kit Schematic
ꢊ
8
7
6
5
8
7
6
5
ꢎ
ꢊ
ꢋ
ꢎ
ꢊ
ꢋ
ꢔ ꢁ ꢉ ꢆ
ꢔ ꢑ A ꢃ E
ꢂ ꢋ
A ꢋ
A ꢊ
ꢂ ꢊ
ꢔ ꢏ ꢈ
ꢅ ꢂ ꢆ ꢓ ꢊ ꢁ A A ꢈ
ꢊ
ꢋ
ꢒ ꢋ 8
A ꢑ ꢈ ꢍ
ꢍ ꢑ ꢈ ꢍ
ꢊ 8
ꢋ ꢎ
ꢊ ꢓ ꢔ
ꢆ
A
ꢍ ꢋ
ꢝ
ꢋ
ꢊ
ꢋ
ꢎ
ꢁ ꢖ ꢏ E ꢗ ꢍ ꢘ ꢌ
ꢁ ꢖ ꢏ E ꢗ ꢍ ꢘ ꢎ
ꢁ ꢖ ꢏ E ꢗ ꢍ ꢘ ꢊ
ꢁ ꢖ ꢏ E ꢗ ꢍ ꢘ ꢋ
Maxim Integrated
│ 22
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
MAX77975/MAX77976 EV Kit Schematic (continued)
ꢍ
ꢎ
ꢐ ꢇ ꢁ ꢕ ꢁ
ꢁ 6
ꢐ ꢇ ꢁ ꢕ A
ꢆ 5
ꢍ
ꢎ
ꢍ
ꢎ
ꢍ
ꢎ
ꢍ
ꢋ
ꢍ
ꢋ
Maxim Integrated
│ 23
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
MAX77975/MAX77976 EV Kit Schematic (continued)
A
K
ꢁ ꢂ
ꢚ ꢕ ꢃ
E ꢔ
ꢋ ꢐ
ꢋ ꢎ
7
ꢎ
ꢋ 5
ꢁ ꢍ ꢍ
ꢕ ꢍ
ꢕ ꢍ
ꢋ ꢋ
ꢌ
ꢌ
ꢁ ꢍ ꢍ ꢇ ꢄ
ꢁ ꢍ ꢍ ꢇ ꢄ
ꢁ ꢍ ꢍ ꢇ ꢄ
ꢁ ꢍ ꢍ ꢇ ꢄ
5 6
ꢎ ꢌ
ꢀ ꢋ
ꢌ ꢐ
ꢚ ꢕ ꢃ
ꢚ ꢕ ꢃ
ꢚ ꢕ ꢃ
ꢚ ꢕ ꢃ
ꢚ ꢕ ꢃ
ꢚ ꢕ ꢃ
ꢚ ꢕ ꢃ
ꢚ ꢕ ꢃ
5 ꢋ
ꢎ 7
ꢀ 5
ꢌ 5
ꢋ 5
ꢋ ꢋ
ꢁ ꢍ ꢄ ꢊ E
ꢁ ꢍ ꢄ ꢊ E
ꢁ ꢍ ꢄ ꢊ E
6 ꢎ
ꢀ 7
ꢋ ꢌ
5
ꢋ
ꢁ ꢔ ꢂ ꢂ
ꢁ ꢔ ꢆ ꢑ
9
ꢎ
A ꢚ ꢕ ꢃ
ꢋ ꢐ
6
7
8
9
ꢋ ꢐ
ꢋ ꢋ
Maxim Integrated
│ 24
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
MAX77975/MAX77976 EV Kit Schematic (continued)
MEꢆꢇAꢂꢈꢆAꢉ
ꢀꢁAꢂꢃ ꢄꢅꢅ
Mꢈꢀꢆꢊ
Mꢇꢊ
Mꢇꢋ
9ꢎꢌꢍ
9ꢎꢌꢍ
AK67ꢋꢍꢊꢏꢊꢏꢐ
ꢎꢍꢏꢀꢄMꢌ5ꢎꢊ6ꢇꢏꢎꢎ
ꢎꢍꢏꢀꢄMꢌ5ꢎꢊ6ꢇꢏꢎꢎ
ꢎꢊꢏAK67ꢋꢍꢊꢊꢐ5ꢑꢋꢑꢏꢎ8
ꢆAꢒꢉEꢀ
ꢀꢑAꢆEꢐ
Mꢇꢌ
ꢀꢑAꢆEꢐ
Mꢇꢍ
9ꢎꢌꢍ
ꢎꢍꢏꢀꢄMꢌ5ꢎꢊ6ꢇꢏꢎꢎ
9ꢎꢌꢍ
ꢎꢍꢏꢀꢄMꢌ5ꢎꢊ6ꢇꢏꢎꢎ
ꢀꢑAꢆEꢐ
ꢀꢑAꢆEꢐ
Maxim Integrated
│ 25
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
MAX77975/MAX77976 EV Kit PCB Layout
1.0ꢀ
MAX77975/MAX77976 EV Kit Component Placement Guide—Top Silkscreen
Maxim Integrated
│ 26
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
MAX77975/MAX77976 EV Kit PCB Layout (continued)
1.0ꢀ
MAX77975/MAX77976 EV Kit PCB Layout—Top View
Maxim Integrated
│ 27
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
MAX77975/MAX77976 EV Kit PCB Layout (continued)
1.0ꢀ
MAX77975/MAX77976 EV Kit PCB Layout—Layer 2
Maxim Integrated
│ 28
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
MAX77975/MAX77976 EV Kit PCB Layout (continued)
1.0ꢀ
MAX77975/MAX77976 EV Kit PCB Layout—Layer 3
Maxim Integrated
│ 29
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
MAX77975/MAX77976 EV Kit PCB Layout (continued)
1.0ꢀ
MAX77975/MAX77976 EV Kit PCB Layout—Bottom View
Maxim Integrated
│ 30
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
MAX77975/MAX77976 EV Kit PCB Layout (continued)
1.0ꢀ
MAX77975/MAX77976 EV Kit PCB Layout—Bottom Silkscreen
Maxim Integrated
│ 31
www.maximintegrated.com
Evaluates: MAX77975/MAX77976/
MAX77958
MAX77975/MAX77976
Evaluation Kits
Revision History
REVISION REVISION
PAGES
CHANGED
DESCRIPTION
NUMBER
DATE
0
1
9/20
Initial release
—
11/20
Updated Ordering Information table
14
For pricing, delivery, and ordering information, please visit Maxim Integrated’s online storefront at https://www.maximintegrated.com/en/storefront/storefront.html.
Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses
are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time.
©
Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc.
2020 Maxim Integrated Products, Inc.
│ 32
相关型号:
MAX77960B
25VIN, 3AOUT to 6AOUT, USB-C Buck-Boost Charger with Integrated FETs for 2S/3S Li-Ion Batteries
MAXIM
MAX77960BEFV06+
25VIN, 3AOUT to 6AOUT, USB-C Buck-Boost Charger with Integrated FETs for 2S/3S Li-Ion Batteries
MAXIM
MAX77960BEFV06+T
25VIN, 3AOUT to 6AOUT, USB-C Buck-Boost Charger with Integrated FETs for 2S/3S Li-Ion Batteries
MAXIM
MAX77960BEFV12+
25VIN, 3AOUT to 6AOUT, USB-C Buck-Boost Charger with Integrated FETs for 2S/3S Li-Ion Batteries
MAXIM
MAX77960BEFV12+T
25VIN, 3AOUT to 6AOUT, USB-C Buck-Boost Charger with Integrated FETs for 2S/3S Li-Ion Batteries
MAXIM
©2020 ICPDF网 联系我们和版权申明