MAX9060EVKIT [MAXIM]

Fully Assembled and Tested;


型号：	MAX9060EVKIT
厂家：	MAXIM INTEGRATED PRODUCTS
描述：	Fully Assembled and Tested
文件：	总7页 (文件大小：205K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

19-4361; Rev 0; 11/08

MAX9060–MAX9065 Evaluation Kits

Evluate:–MAX9065

General Description

Features

The MAX9060–MAX9065 evaluation kits (EV kits) are fully

assembled and tested PCBs that evaluate the

MAX9060–MAX9064 single comparators and the

MAX9065 window detector comparator. The MAX9060/

MAX9061 EV kits require an external reference (REF) volt-

age between 0.9V and 5.5V, while the MAX9062/

MAX9063/MAX9064 come with an internal reference

voltage of 0.2V. The MAX9065 comes preprogrammed

with trip points at 3V and 4.2V. The MAX9062–MAX9065

operate from a VCC supply between 1V to 5.5V. All EV kits

have a common -0.3V to +5.5V input voltage (IN) range.

o -0.3V to +5.5V Input Voltage Range

o 0.9V to 5.5V External Reference Range

(MAX9060/MAX9061)

o 1V to 5.5V VCC Range (MAX9062–MAX9065)

o 0.2V Internal Reference Voltage

(MAX9062/MAX9063/MAX9064)

o 3V and 4.2V Trip Points (MAX9065)

o Evaluates 4-Bump UCSP and Optional 5-Pin

SOT23 Packages

The MAX9060–MAX9065 EV kits are configured to eval-

uate both the 4-bump UCSP™ (installed) and an

optional 5-pin SOT23 (to do so, request a free

MAX9060–MAX9065 SOT23 IC sample from the factory

when ordering the EV kits).

o Lead-Free and RoHS Compliant

o Fully Assembled and Tested

Component List

Ordering Information

DESIGNATION QTY

DESCRIPTION

PART

TYPE

EV Kit

MAX9060EVKIT+

0.1μF 10%, 25V X7R,

MAX9061EVKIT+

ceramic capacitors (0603)

Murata GRM188R71E104K

TDK C1608X7R1E104K

C1, C2

MAX9062EVKIT+

MAX9063EVKIT+

JU1

3-pin header

MAX9064EVKIT+

R1, R2

100kꢀ 5% resistors* (0603)

MAX9065EVKIT+

See the EV Kit-Specific

Component List

+Denotes lead-free and RoHS compliant.

—

Not installed, single comparators

(5 SOT23)

Maxim MAX9060–MAX9065

PCB: MAX9060/1/2/3/4/5

Evaluation Kit+

*R1 and R2 are not installed on the MAX9064/MAX9065.

UCSP is a trademark of Maxim Integrated Products, Inc.

________________________________________________________________ Maxim Integrated Products

For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,

or visit Maxim’s website at www.maxim-ic.com.

MAX9060–MAX9065 Evaluation Kits

EV Kit-Specific Component List

PART

DESIGNATION

DESCRIPTION

External reference, noninverting single comparator

(4 UCSP)

Maxim MAX9060EBS+

(Top Mark: AFX)

MAX9060EVKIT+

External reference, inverting single comparator

(4 UCSP)

Maxim MAX9061EBS+

(Top Mark: AFY)

MAX9061EVKIT+

MAX9062EVKIT+

MAX9063EVKIT+

MAX9064EVKIT+

MAX9065EVKIT+

Internal reference, noninverting single comparator

(4 UCSP)

Maxim MAX9062EBS+

(Top Mark: AFZ)

Internal reference, inverting single comparator

(4 UCSP)

Maxim MAX9063EBS+

(Top Mark: AGA)

Internal reference push-pull noninverting single comparator

(4 UCSP)

Maxim MAX9064EBS+

(Top Mark: AGB)

Single window comparator

(4 UCSP)

Maxim MAX9065EBS+

(Top Mark: AGC)

Evluate:–MAX9065

Component Suppliers

SUPPLIER

PHONE

WEBSITE

www.murata-northamerica.com

www.component.tdk.com

Murata Electronics North America, Inc.

TDK Corp.

770-436-1300

847-803-6100

Note: Indicate that you are using the MAX9060, MAX9061, MAX9062, MAX9063, MAX9064, or MAX9065 when contacting these

component suppliers.

_______________________________________________________________________________________

MAX9060–MAX9065 Evaluation Kits

Evluate:–MAX9065

Quick Reference

Recommended Equipment

Before beginning, the following equipment is needed:

Detailed Description of Hardware

The MAX9060–MAX9065 EV kits are fully assembled

and tested PCBs that evaluate the MAX9060–MAX9064

single comparators and the MAX9065 window detector

comparator. The MAX9060/MAX9061 EV kits require an

external reference (REF) voltage between 0.9V and

5.5V, while the MAX9062/MAX9063/MAX9064 EV kits

have an internal reference voltage of 0.2V. The MAX9065

comes preprogrammed with trip points at 3V and 4.2V.

The MAX9062–MAX9065 require VCC between 1V to

5.5V to operate. All EV kits have a common -0.3 to

+5.5V input voltage (IN) range.

•

Two +5V DC power supplies (VCC/REF, IN)

Optional third +5V DC power supply (EXT for

MAX9060–MAX9063 only)

•

One digital multimeter (DMM)

Procedure

The MAX9060–MAX9065 EV kits are fully assembled

and tested. Follow the steps below to verify board oper-

ation. Caution: Do not turn on the power supply until

all connections are completed.

VCC/REF Supply Selection

The VCC/REF pad is used to supply either a 0.9V to

5.5V reference voltage (MAX9060/MAX9061) or a 1V to

5.5V VCC supply (MAX9062–MAX9065) to the IC.

1) Verify that a shunt is installed on pins 1-2 of jumper

JU1.

2) Connect all power-supply ground terminals to a

GND pad.

The MAX9060–MAX9065 EV kits can evaluate both 4-

bump UCSP (U1) and 5-pin SOT23 (U2) packages. The

EV kits offer the option to power up U1 or U2 separately

though configuration of jumper JU1. See Table 1 for

power-up options.

3) Connect the positive terminal of a DC power supply

to the VCC/REF pad.

4) Connect the positive terminal of a DC power supply

to the IN pad.

Table 1. Jumper JU1 Functions

5) Connect the positive terminal of a DC power supply

to the EXT pad (MAX9060–MAX9063 only).

SHUNT POSITION

VCC/REF PAD

1-2*

Powers U1 (UCSP) sub circuit

6) Turn on the VCC/REF power supply and set it to the

desired level.

Powers optional U2 (SOT23) sub

circuit

2-3

7) Turn on the IN power supply and set it to the

desired level.

*Default position.

8) Turn on the EXT power supply and set it to the

desired level (MAX9060–MAX9063 only).

EXT Pad

The EXT pad on the EV kits can be used as an external

source to pull the outputs high through resistors R1 or

R2 when open-drain versions of the parts are used.

9) Monitor the output using a DMM at the OUT1 pad,

and study its response to varying voltages at IN.

_______________________________________________________________________________________

MAX9060–MAX9065 Evaluation Kits

Evluate:–MAX9065

Figure 1. MAX9060/MAX9061 EV Kits Schematic

_______________________________________________________________________________________

MAX9060–MAX9065 Evaluation Kits

Evluate:–MAX9065

Figure 2. MAX9062/MAX9063 EV Kits Schematic

_______________________________________________________________________________________

MAX9060–MAX9065 Evaluation Kits

Evluate:–MAX9065

Figure 3. MAX9064/MAX9065 EV Kits Schematic

_______________________________________________________________________________________

MAX9060–MAX9065 Evaluation Kits

Evluate:–MAX9065

Figure 4. MAX9060–MAX9065 EV Kits PCB Layout—Component

Placement Guide

Figure 5. MAX9060–MAX9065 EV Kits PCB Layout—Component

Side

Figure 6. MAX9060–MAX9065 EV Kits PCB Layout—Solder Side

Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are

implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.

Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 _____________________ 7

is a registered trademark of Maxim Integrated Products, Inc.

相关型号：