MAX9619AXT+T [MAXIM]
Operational Amplifier, 1 Func, 25uV Offset-Max, BICMOS, PDSO6, ROHS COMPLIANT, MO-203, SC-70, 6 PIN;型号: | MAX9619AXT+T |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | Operational Amplifier, 1 Func, 25uV Offset-Max, BICMOS, PDSO6, ROHS COMPLIANT, MO-203, SC-70, 6 PIN 运算放大器 |
文件: | 总12页 (文件大小:1649K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
19-4753; Rev 2; 2/10
Single/Dual SC70, Zero-Drift,
High-Efficiency, 1.5MHz Op Amps with RRIO
General Description
Features
The MAX9617–MAX9620 are low-power, zero-drift oper-
ational amplifiers available in space-saving SC70 pack-
ages. They are designed for use in portable consumer,
medical, and industrial applications.
Low 59µA Quiescent Current
S
S
S
S
Very-Low 10µV (max) Input Offset Voltage
Dual Version Available in an 8-Pin SC70 Package
Low Input Noise
The MAX9617–MAX9620 feature rail-to-rail CMOS inputs
and outputs, a 1.5MHz GBW at just 59FA supply current
and 10FV (max) zero-drift input offset voltage over time
and temperature. The zero-drift feature reduces the high
1/f noise typically found in CMOS input operational ampli-
fiers, making it useful for a wide variety of low-frequency
measurement applications.
√
42nV/ Hz at 1kHz
0.42µV from 0.1Hz to 10Hz
P-P
Rail-to-Rail Inputs and Outputs
1.5MHz GBW
S
S
S
S
S
S
S
Ultra-Low 10pA Input Bias Current
Single 1.8V to 5.5V Supply Voltage Range
Unity-Gain Stable
The MAX9617 and MAX9619 are available in a space-
saving, 2mm x 2mm, 6-pin SC70 package. The MAX9618
is available in a 2mm x 2mm, 8-pin SC70 package and
features a power-saving shutdown mode. The MAX9620
is available in a 2mm x 2mm, 5-pin SC70 package. All
devices are specified over the -40NC to +125NC automo-
tive operating temperature range.
Power-Saving Shutdown Mode (MAX9619)
Available in Tiny 5-Pin SC70 (MAX9620), 6-Pin
SC70 (MAX9617/MAX9619), and 8-Pin SC70
(MAX9618) Packages
Ordering Information
Applications
Sensor Interfaces
PART
TEMP RANGE
-40NC to +125NC
-40NC to +125NC
-40NC to +125NC
-40NC to +125NC
PIN-PACKAGE
6 SC70
Loop-Powered Systems
MAX9617AXT+
MAX9618AXA+
MAX9619AXT+
MAX9620AXK+
8 SC70
Portable Medical Devices
Battery-Powered Devices
Cardiac Monitors
6 SC70
5 SC70
+Denotes a lead(Pb)-free/RoHS-compliant package.
Functional Diagrams
TOP VIEW
MAX9618
MAX9617
MAX9619
MAX9620
V
IN+
V
V
IN+
V
IN+
5
4
6
6
1
2
3
OUTA
INA-
V
1
2
3
1
2
3
8
7
6
5
1
2
3
4
DD
DD
DD
DD
-
OUTB
INB-
+
-
+
-
+
-
GND
IN-
GND
IN-
GND
IN-
5
4
5
4
SHDN
OUT
DD
+
INA+
GND
-
+
OUT
OUT
INB+
_______________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
Single/Dual SC70, Zero-Drift,
High-Efficiency, 1.5MHz Op Amps with RRIO
ABSOLUTE MAXIMUM RATINGS
Supply Voltage (V
to GND).................................-0.3V to +6V
6-Pin SC70 (derate 3.1mW/NC above +70NC)..........245.4mW
8-Pin SC70 (derate 3.1mW/NC above +70NC).............245mW
Operating Temperature Range........................ -40NC to +125NC
Junction Temperature .....................................................+150NC
Storage Temperature Range............................ -65NC to +150NC
Lead Temperature (soldering, 10s) ................................+300NC
DD
All Other Pins, IN+ to IN- .............(GND - 0.3V) to (V
Short-Circuit Duration to Either Supply Rail,
OUT, OUTA, OUTB............................................................ 10s
Continuous Input Current (any pins)............................... 20mA
+ 0.3V)
DD
Continuos Power Dissipation (T = +70NC)
A
5-Pin SC70 (derate 3.1mW/NC above +70NC).............247mW
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(V
DD
= +3.3V, V
= 0V, V
= V = V /2, R = 100kI to V /2, T = -40NC to +125NC, unless otherwise noted. Typical values
IN+ IN- DD L DD A
GND
are at +25NC.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
Guaranteed by PSRR, 0NC PT P+70NC
MIN
TYP
MAX
UNITS
POWER SUPPLY
1.6
1.8
5.5
5.5
78
A
Supply Voltage Range
V
V
DD
Guaranteed by PSRR, -40NC PT P+125NC
A
T
= +25NC
A
59
Supply Current
(per Amplifier)
I
FA
DD
-40NC PT P+125NC
111
A
T
= +25NC
119
107
116
135
A
V
= 1.8V to 5.5V
Power-Supply Rejection Ratio
(Note 2)
DD
PSRR
-40NC PT P+125NC
dB
A
0NC PT P+70NC, V
= 1.6V to 5.5V
135
20
A
DD
Power-Up Time
t
V
DD
= 0V to 3V step, A = 1V/V
Fs
ON
V
Shutdown Supply Current
MAX9619 only
300
nA
I
SHDN
Turn-On Time from Shutdown
(MAX9619)
t
50
Fs
V
DD
= 3.3V, V
= 0V to 3.3V step
SHDN
OSD
DC SPECIFICATIONS
T
= +25NC
0.8
10
25
A
Input Offset Voltage (Note 2)
V
FV
OS
-40NC PT P+125NC
A
Input Offset Voltage Drift
(Note 2)
DV
5
120
nV/NC
OS
T
=+25NC
0.01
0.14
3.5
A
Input Bias Current (Note 2)
Input Offset Current
I
B
-40NC PT P+125NC
nA
V
A
I
0.005
OS
V
V
+
+
DD
0.1
T
= +25NC
-0.1
A
Guaranteed by
CMRR test
Input Common-Mode Range
V
CM
DD
-40NC PT P+125NC
-0.1
122
116
A
0.05
-0.1V PV
-0.1V PV
PV
PV
+ 0.1V, T = +25NC
135
CM
DD
A
Common-Mode Rejection Ratio
(Note 2)
CMRR
dB
dB
+ 0.05V,
CM
DD
-40NC PT P+125NC
A
20mV PV
PV
- 20mV,
R = 100kIto V /2
OUT
DD
120
123
138
160
L
DD
Open-Loop Gain (Note 2)
AV
OL
150mV PV
PV
- 150mV,
OUT
DD
R = 5kIto V /2
L
DD
2
______________________________________________________________________________________
Single/Dual SC70, Zero-Drift,
High-Efficiency, 1.5MHz Op Amps with RRIO
ELECTRICAL CHARACTERISTICS (continued)
(V
DD
= +3.3V, V
= 0V, V
= V = V /2, R = 100kI to V /2, T = -40NC to +125NC, unless otherwise noted. Typical values
GND
IN+
IN-
DD
L
DD
A
are at +25NC.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
50
MAX
UNITS
Differential
Input Resistance
R
IN
MI
Common mode
200
R = 100kIto V /2
12
22
L
DD
V
V
DD
- V
R = 5kIto V /2
L DD
OH
OUT
R = 600Ito V /2
50
L
DD
Output-Voltage Swing
Short-Circuit Current
mV
mA
R = 100kIto V /2
11
18
L
DD
V
V
R = 5kIto V /2
L DD
OL
OUT
R = 600Ito V /2
50
L
DD
I
150
SC
AC SPECIFICATIONS
Gain-Bandwidth Product
Slew Rate
GBWP
SR
1.5
0.7
MHz
V/Fs
0V PV
P2V
OUT
Input Voltage-Noise Density
Input Voltage Noise
e
n
f = 1kHz
42
nV/√Hz
0.1Hz Pf P10Hz
0.42
100
60
FV
P-P
Input Current-Noise Density
Phase Margin
i
n
f = 1kHz
fA/√Hz
Degrees
pF
C = 20pF
L
Capacitive Loading
C
L
No sustained oscillation, A = 1V/V
V
400
-100
Crosstalk
f = 10kHz (MAX9618)
dB
LOGIC INPUT (MAX9619)
Shutdown Input Low
Shutdown Input High
Shutdown Input Leakage Current
V
0.5
V
V
IL
V
IH
1.3
I /I
IL IH
1
100
nA
Note 1: Specifications are 100% tested at T = +25NC (exceptions noted). All temperature limits are guaranteed by design.
A
Note 2: Guaranteed by design.
Typical Operating Characteristics
(V
DD
= +3.3V, V
= 0V, outputs have R = 100kIconnected to V /2. T = +25NC, unless otherwise specified.)
GND
L
DD
A
INPUT OFFSET VOLTAGE
DRIFT HISTOGRAM
OFFSET VOLTAGE HISTOGRAM
25
20
15
10
5
20
18
16
14
12
10
8
6
4
2
0
0
0
1
2
3
4
-0.03 -0.02 -0.01
0
0.01 0.02 0.03 0.04
OFFSET VOLTAGE (FV)
OFFSET VOLTAGE DRIFT (FV/NC)
_______________________________________________________________________________________
3
Single/Dual SC70, Zero-Drift,
High-Efficiency, 1.5MHz Op Amps with RRIO
Typical Operating Characteristics (continued)
(V
DD
= +3.3V, V
= 0V, outputs have R = 100kIconnected to V /2. T = +25NC, unless otherwise specified.)
GND L DD A
SUPPLY CURRENT
vs. SUPPLY VOLTAGE
SUPPLY CURRENT
vs. TEMPERATURE
INPUT OFFSET VOLTAGE
vs. INPUT COMMON MODE
120
100
90
80
70
60
50
40
30
20
10
0
6
5
4
100
80
60
40
20
0
T = +125NC
A
T
A
= +125NC
T
= -40NC
A
T = +25NC
A
3
2
1
0
T = -40NC
A
T = +25NC
A
1.6 2.1 2.6 3.1 3.6 4.1 4.6 5.1 5.6
SUPPLY VOLTAGE (V)
-50 -25
0
25
50
75 100 125
-0.1 0.4 0.9 1.4 1.9 2.4 2.9 3.4
INPUT COMMON MODE (V)
TEMPERATURE (NC)
INPUT BIAS CURRENT
vs. INPUT COMMON MODE
INPUT OFFSET VOLTAGE
vs. TEMPERATURE
COMMON-MODE REJECTION RATIO
vs. FREQUENCY
300
250
200
150
100
50
6
5
4
3
2
1
0
140
120
100
80
60
NONINVERTING INPUT
INVERTING INPUT
40
20
0
0
-0.1 0.4 0.9 1.4 1.9 2.4 2.9 3.4
INPUT COMMON MODE (V)
-50 -25
0
25
50
75 100 125
0.1
1
10 100 1k 10k 100k 1M 10M
FREQUENCY (Hz)
TEMPERATURE (NC)
COMMON-MODE REJECTION RATIO
vs. TEMPERATURE
OUTPUT-VOLTAGE SWING HIGH
vs. TEMPERATURE
POWER-SUPPLY REJECTION RATIO
vs. FREQUENCY
140
120
100
80
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0.22
0.20
140
120
100
80
60
40
60
20
40
0
-50 -25
0
25
50
75 100 125
-50 -25
0
25
50
75 100 125
0.1
1
10 100 1k 10k 100k 1M 10M
FREQUENCY (Hz)
TEMPERATURE (NC)
TEMPERATURE (NC)
4
______________________________________________________________________________________
Single/Dual SC70, Zero-Drift,
High-Efficiency, 1.5MHz Op Amps with RRIO
Typical Operating Characteristics (continued)
(V
DD
= +3.3V, V
= 0V, outputs have R = 100kIconnected to V /2. T = +25NC, unless otherwise specified.)
GND L DD A
OUTPUT-VOLTAGE SWING LOW
vs. TEMPERATURE
OPEN-LOOP GAIN vs. FREQUENCY
INPUT VOLTAGE NOISE vs. FREQUENCY
0.40
160
140
120
100
80
10,000
1000
100
0.38
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0.22
0.20
60
40
20
0
-20
-40
10
-50 -25
0
25
50
75 100 125
-10m 100m
1
10 100 1k 10k 100k 1M 10M
FREQUENCY (Hz)
0.1
1
10
100
1k
10k
100k
TEMPERATURE (NC)
FREQUENCY (Hz)
INPUT CURRENT NOISE
vs. FREQUENCY
INPUT VOLTAGE 0.1Hz TO 10Hz NOISE
MAX9617 toc15
1000
100
10
0.1FV/div
0.1
1
10
100
1k
10k
1s/div
FREQUENCY (Hz)
LARGE-SIGNAL GAIN
vs. FREQUENCY
SMALL-SIGNAL STEP RESPONSE
vs. TIME
SMALL-SIGNAL GAIN
vs. FREQUENCY
MAX9617 toc19
10
0
5
0
100mV
P-P
100mV
P-P
2V
P-P
-5
-10
-20
-30
-40
-50
-10
-15
-20
-25
-30
-35
50mV/div
10
100
1k
10k
100k
1M
10M
100Fs/div
10
100
1k
10k
100k
1M
10M
FREQUENCY (kHz)
FREQUENCY (kHz)
_______________________________________________________________________________________
5
Single/Dual SC70, Zero-Drift,
High-Efficiency, 1.5MHz Op Amps with RRIO
Typical Operating Characteristics (continued)
(V
DD
= +3.3V, V
= 0V, outputs have R = 100kIconnected to V /2. T = +25NC, unless otherwise specified.)
GND L DD A
LARGE-SIGNAL STEP RESPONSE
vs. TIME
CAPACITIVE LOAD
vs. ISOLATION RESISTOR
POWER-UP TIME
MAX9617 toc20
MAX9617 toc22
10,000
1000
100mV
P-P
V
= 100mV
P-P
IN
A = 1V/V
V
SHDN
1V/div
500mV/div
UNSTABLE
OUT
1V/div
100
100Fs/div
0.1
1
10
100
1000
20Fs/div
ISOLATION RESISTOR (I)
Pin Configurations
TOP VIEW
+
+
+
+
IN+
V
OUTA
INA-
V
IN+
GND
IN-
V
IN+
GND
IN-
V
DD
6
8
7
6
5
6
5
4
5
1
1
1
2
3
1
2
3
DD
DD
DD
2
3
4
OUTB
INB-
GND
IN-
2
3
5
4
SHDN
OUT
SHDN
OUT
MAX9617
MAX9619
MAX9620
MAX9618
INA+
GND
4
OUT
INB+
SC70
SC70
SC70
SC70
Pin Description
PIN
NAME
FUNCTION
MAX9617 MAX9618 MAX9619 MAX9620
1
2
—
4
1
2
1
2
IN+
GND
IN-
Positive Input
Ground
3
—
—
8
3
3
Negative Input
Output
4
4
4
OUT
5, 6
—
—
—
—
—
—
—
6
5
V
DD
Positive Supply Voltage. Bypass to GND with a 0.1FF capacitor.
Shutdown. Pull shutdown low to activate shutdown mode.
Channel A Output
—
1
5
—
—
—
—
—
—
—
SHDN
OUTA
INA-
—
—
—
—
—
—
2
Channel A Negative Input
3
INA+
INB+
INB-
Channel A Positive Input
5
Channel B Positive Input
6
Channel B Negative Input
7
OUTB
Channel B Output
6
______________________________________________________________________________________
Single/Dual SC70, Zero-Drift,
High-Efficiency, 1.5MHz Op Amps with RRIO
frequency of the amplifier, avoiding aliasing or other sig-
nal integrity issues in sensitive applications.
Detailed Description
The MAX9617–MAX9620 are precision, low-power op
Shutdown Operation
The MAX9619 features an active-low shutdown mode
that lowers the quiescent current to less than 300nA. In
shutdown mode, the inputs and output are high imped-
ance. This allows multiple devices to be multiplexed
onto a single line without the use of external buffers. Pull
SHDN high for normal operation.
amps ideal for signal processing applications. The
MAX9617, MAX9619, and MAX9620 are single-channel
devices. The MAX9618 is a dual-channel device. These
devices use an innovative autozero technique that allows
precision and low noise with a minimum amount of
power. The low input offset voltage, CMOS inputs, and
the absence of 1/f noise allows for optimization of active
filter designs.
The shutdown high (V ) and low (V ) threshold voltages
IH
IL
are designed for ease of integration with digital con-
trols like microcontroller outputs. These thresholds are
independent of supply, eliminating the need for external
pulldown circuitry.
The MAX9617–MAX9620 achieve rail-to-rail performance
at the input through the use of a low-noise charge pump.
This ensures a glitch-free, common-mode input voltage
range extending from the negative supply rail up to
the positive supply rail, eliminating crossover distortion
common to traditional n-channel/p-channel CMOS pair
inputs, reducing harmonic distortion at the output.
Applications Information
The MAX9617–MAX9620 low-power, low-noise, and
precision operational amplifiers are designed for appli-
cations in the portable medical, such as ECG and pulse
oximetry, portable consumer, and industrial markets.
The MAX9619 features a shutdown mode that greatly reduc-
es quiescent current when the device is not operational.
Autozero
The MAX9617–MAX9620 feature an autozero circuit that
allows the device to achieve less than 10FV (max) of
input offset voltage and eliminates the 1/f noise.
The MAX9617–MAX9620 are also ideal for loop-powered
systems that interface with pressure sensors or strain
gauges.
Capacitive-Load Stability
Driving large capacitive loads can cause instability in
many op amps. The MAX9617–MAX9620 are stable
with capacitive loads up to 400pF. Stability with higher
capacitive loads can be improved by adding an isolation
resistor in series with the op-amp output. This resistor
improves the circuit’s phase margin by isolating the load
capacitor from the amplifier’s output. The graph in the
Typical Operating Characteristics gives the stable oper-
ation region for capacitive load versus isolation resistors.
Internal Charge Pump
An internal charge pump provides an internal supply typi-
cally 1V beyond the upper rail. This internal rail allows the
MAX9617–MAX9620 to achieve true rail-to-rail inputs and
outputs, while providing excellent common-mode rejec-
tion, power-supply rejection ratios, and gain linearity.
The charge pump requires no external components, and
in most applications is entirely transparent to the user.
The operating frequency is well beyond the unity-gain
V
IN
+5V
MAX9617
ADC
Figure 1. Typical Application Circuit: Sallen-Key Active Lowpass Filter
_______________________________________________________________________________________
7
Single/Dual SC70, Zero-Drift,
High-Efficiency, 1.5MHz Op Amps with RRIO
Careful layout technique helps optimize performance by
decreasing the amount of stray capacitance at the op
amp’s inputs and outputs. To decrease stray capaci-
tance, minimize trace lengths by placing external com-
ponents close to the op amp’s pins.
Power Supplies and Layout
The MAX9617–MAX9620 operate either with a single
supply from +1.6V to +5.5V with respect to ground or
with dual supplies from Q0.8V to Q2.75V. When used with
dual supplies, bypass both supplies with their own 0.1FF
capacitor to ground. When used with a single supply,
bypass VDD with a 0.1FF capacitor to ground.
Chip Information
PROCESS: BiCMOS
8
______________________________________________________________________________________
Single/Dual SC70, Zero-Drift,
High-Efficiency, 1.5MHz Op Amps with RRIO
Package Information
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a “+”,
“#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character,
but the drawing pertains to the package regardless of RoHS status.
PACKAGE TYPE
5 SC70
PACKAGE CODE
X5+1
DOCUMENT NO.
21-0076
6 SC70
X6SN-1
21-0077
8 SC70
X8C+1
21-0460
PACKAGE OUTLINE, 5L SC70
1
21-0076
E
1
_______________________________________________________________________________________
9
Single/Dual SC70, Zero-Drift,
High-Efficiency, 1.5MHz Op Amps with RRIO
Package Information (continued)
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a “+”,
“#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character,
but the drawing pertains to the package regardless of RoHS status.
10 _____________________________________________________________________________________
Single/Dual SC70, Zero-Drift,
High-Efficiency, 1.5MHz Op Amps with RRIO
Package Information (continued)
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a “+”,
“#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character,
but the drawing pertains to the package regardless of RoHS status.
______________________________________________________________________________________ 11
Single/Dual SC70, Zero-Drift,
High-Efficiency, 1.5MHz Op Amps with RRIO
Revision History
REVISION
NUMBER
REVISION
DATE
PAGES
CHANGED
DESCRIPTION
0
1
7/09
9/09
Initial release
—
Removed references to MAX9617 shutdown functionality
1, 2, 3, 6, 7
Removed future product reference for the MAX9618, and added MAX9619 and
MAX9620 to the data sheet
2
2/10
1–11
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied.
Maxim reserves the right to change the circuitry and specifications without notice at any time.
12
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
2010 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc.
©
相关型号:
MAX961ESA+
Comparator, 1 Func, 2000uV Offset-Max, 4.5ns Response Time, CMOS, PDSO8, 0.150 INCH, LEAD FREE, SOIC-8
MAXIM
MAX961ESA+T
Comparator, 1 Func, 2000uV Offset-Max, 4.5ns Response Time, CMOS, PDSO8, 0.150 INCH, LEAD FREE, SOIC-8
MAXIM
MAX961ESA-T
Comparator, 1 Func, 2000uV Offset-Max, 4.5ns Response Time, CMOS, PDSO8, 0.150 INCH, MS-012AA, SOIC-8
MAXIM
MAX961EUA+
Comparator, 1 Func, 4500uV Offset-Max, 4.5ns Response Time, CMOS, PDSO8, LEAD FREE, UMAX-8
MAXIM
MAX961EUA+T
Comparator, 1 Func, 4500uV Offset-Max, 4.5ns Response Time, CMOS, PDSO8, LEAD FREE, UMAX-8
MAXIM
©2020 ICPDF网 联系我们和版权申明