CSM165/L2S [MAXWELL]
Transistor Output Optocoupler;
| 型号： | CSM165/L2S |
| 厂家： | 
MAXWELL TECHNOLOGIES |
| 描述： | Transistor Output Optocoupler 输出元件 光电 |
| 文件： | 总12页 (文件大小：324K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
®
ISOCOM LTD
IECQ
QC 88000-C001
COMPONENT
SPECIFICATION
ISSUE 8
May 2013
Component Specification
For
Ceramic Hermetically Sealed
Transistor Optocouplers
M1077 IECQ
IECQ Product Certificate Number E1280/F
Up-to-date lists and bibliographical references of IECQ publications may be downloaded from www.iecq.org
Further copies of this document may be obtained from:
IEC
International Electrotechnical Commission
Commission Electrotechnique Internationale
Box 131, rue de Varembé, CH 1211 Geneva 20, Switzerland
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 1 of 12
QC 88000-C001: 2013
®
ISOCOM LTD
FOREWORD
The IECQ Quality Assessment System for Electronic Components (IECQ) is composed of those member countries of
the International Electrotechnical Commission (IEC) who wish to take part in a harmonized system for electronic
components of assessed quality. IECQ is also known in some European member countries as IECQ-CECC.
The object of the System is to facilitate international trade by the harmonization of the specifications and quality
assessment procedures for electronic components, and by the grant of an internationally recognised Mark, or
Certificate of Conformity. The components produced or services provided under the system are thereby acceptable in
all member countries without further testing.
This Component Specification is based upon the requirements of IECQ 03-3, Annex E (QC 001002-2 Amendment 1,
Clause 5.4) and has been prepared by:
Isocom Ltd
48 Hutton Close
Crowther Industrial Estate
Washington
Tyne and Wear
NE38 0AH
United Kingdom
Tel:
Fax:
+44 0191 4166 546
+44 0191 4155 055
and published under the authority of:
BSI Group
Kitemark Court, Davy Avenue
Knowlhill, Milton Keynes
MK5 8PP
United Kingdom
AMENDMENT RECORD
Issue 1 - Changed Page 10 – Amendments 25/06/09
Issue 2 - Changed Page 4 – Amendments 22/03/10
Issue 3 - Changed Pages 4 & 6 – Updated Drawings 25/06/10
Issue 4 - Changed Pages 3 & 4 – Added devices IS49 & 4N49 05/07/10
Issue 5 - Changed Pages 3, 4, 5, 6, 7 & 10 – RoHS Compliant, Added CSM165-2 & Amendments 13/07/10
Issue 6 – Changed pages 4 & 7, added CH301A and 4/5 pin hybrid outline drawing 26/5/11
Issue 7 – Changed pages 3, added text CH301A and CSM166-4 & page 4, added text CH301A 30/5/13
REQUIREMENTS
The requirements for IECQ Component Specifications as detailed in IECQ 03-3, Annex E (QC 001002-2 Amendment
1, Clause 5.4) are satisfied by the following data sheet.
It should note that IECQ are not responsible for manufacturers declarations made in data sheets which fall outside the
limits of approved detailed in IECQ certificates.
This Component Specification is intended for use with applicable IECQ Assessment Specifications. Eg: QC 88000-
A0001
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 2 of 12
QC 88000-C001: 2013
®
ISOCOM LTD
Ceramic Hermetically Sealed Transistor Optocouplers
■ 4N24
■ 4N49
■ CSM1200
■ CSM1224
■ CSM165-2
■ CSM165-4
■ CSM166-4
■ CSM2224
■ IS49
■ CD500/501
■ CH300
■ CH301A
■ CS200/201
■ CS224
■ CSM200
Features
Applications
▪ Released to IECQ
▪ Military, high reliability system
▪ Hermetically Sealed
▪ Medical instruments
▪ Mos, Cmos Applications
▪ Logic Interfacing
▪ Data Transmission
▪ Power Supply
▪ High Density Packaging
▪ 1500V DC withstand Test Voltage
▪ Low Input Requirements
▪ High Current Transfer Ratio
▪ RoHS Compliant
▪ Modems
Description
These devices are single, dual and quad, hermetically sealed optocouplers. Each channel is
composed of an infra-red emitting diode and a silicon phototransistor. Package styles for these
devices include 6 pin, 8 pin, 16 pin flat pack, and hybrid 4 pin, with surface mount, butt cut and gull
wing options available.
The same electrical die, assembly processes and materials are used for each channel of each
device shown below. Therefore absolute maximum ratings, recommended operating conditions,
electrical specifications and performance characteristics are identical for all units. Any exceptions,
due to packaging variations and limitations, are as noted.
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 3 of 12
QC 88000-C001: 2013
®
ISOCOM LTD
Selection Guide Package Styles and Configuration Options
Metal
16 pin
Package
Lead Style
4 pin Hybrid
Can
6 pin LCC
6 pin DIP
8 pin DIP
Flat Pack
1
1
Channels
1
1
2
2/4
Common Channel Wiring
Isocom Part Numbers and Options
CH300
4N24
4N49
4N24/L2
4N49/L2
4N24/L2S
CSM200, IS49
CS200/201
CS224
CM200/201/L2
CS224/L2
CS200/201/L2S CD500/L2S
CS224/L2S
CD500
CD501
CD500/L2
CD501/L2
CSM165
CSM166
CSM165/L2
CSM166/L2
CSM165/L2S
Commercial
CH301A
CH300/L2
CH301A/L2
CH300/L2S
CSM1200/1244/2224
CSM200/L2, IS49/L2
CSM1200/1244/2224/L2
CSM200/L2S, IS49/L2S
Defense Screen Level
Space Screen Level
CH301A/L2S 4N49/L2S CSM1200/1244/2224/L2S
CD501/L2S CSM166/L2S
Gold
Standard Gold Plate Finish
Solder Dipped
Plate
Gold Plate
Option 20
Gold Plate
Option 20
Option 10
Option 30
Option 60
Gold Plate
Option 20
Option 10
Option 30
Option 60
Gold Plate
Option 20
Option 20
Butt Cut/Gold Plate
Gull Wing/Soldered
Crew Cut/Gold Plate
Functional Diagrams
CH300
CSM1224
IS49
CD500
CD501
CS200/201
CH301A
CSM200
CSM165-2
6 pin LCC
1 Channel
6 pin LCC
1 Channel
4/5 pin Hybrid
1 Channel
6 pin DIP
1 Channel
8 pin DIP
2 Channel
16 pin Flat Pack
*2 Channel
6
1
5
1
2
6
5
4
4
3
4N24
4N49
6 pin TO-5
CS224
CSM1200
CSM2224
CSM166-4
CSM165-4
** 6 pin LCC
1 Channel
6 pin LCC
1 Channel
6 pin DIP
16 pin Flat Pack
4 Channel
16 pin Flat Pack
4 Channel
1 Channel
1 Channel
6
1
5
6
5
5
7
3
2
1
1
4
3
4
3
*
**
Note 2 channel is only for circuit of 2 middle channels 2 & 3 channel on the circuits.
See Outline Drawings 6 Terminal LCC Surface Mount, 1 Channel
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 4 of 12
QC 88000-C001: 2013
®
ISOCOM LTD
Outline Drawings
16 pin Flat Pack, 2 and 4 Channel
7.24 (0.285)
6.99 (0.275)
2.29 (0.09)
max
11.13 (0.438)
10.72 (0.422)
1.27 (0.05)
Ref
0.46 (0.018)
0.36 (0.014)
8.13 (0.32)
Max
2.85 (0.112)
Max
0.88 (0.0345)
Min
0.31 (0.012)
0.23 (0.009)
0.89 (0.035)
0.69 (0.027)
5.23
(0.206)
Max
9.02 (0.355)
8.76 (0.345)
NOTE: DIMENSIONS IN MILLIMETERS
8 pin DIP 2 Channel
9.40 (0.370)
9.91 (0.39)
8.13 (0.32)
Max
0.76 (0.03)
1.27 (0.05)
7.16 (0.282)
7.57 (0.298)
0.51 (0.020)
Min
4.32 (0.17)
Max
0.2 (0.008)
0.33 (0.013)
3.81 (0.15)
Min
7.36 (0.29)
7.87 (0.31)
2.29 (0.09)
2.79 (0.11)
0.51 (0.02)
Max
NOTE: DIMENSIONS IN MILLIMETERS
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 5 of 12
QC 88000-C001: 2013
®
ISOCOM LTD
6 pin TO-5, 1 Channel
6 LEADS
0.0175 (0.445)
0.040(1.02)
0.32 (8.13)
5
0.037 (0.935)
6
3
7
2
1
0.022 (5.08)
0.5 (12.70)
0.031 (0.787)
0.17 (4.32)
6 pin DIP 1 channel
8.94
9.34
2.8 MIN
1.37 TYP
0.22
0.3
7.62
8.12
7.16
7.56
0.63
1.14
3.5 MIN
2.54
0.4
0.5
NOTE: DIMENSIONS IN MILLIMETERS
6 Terminal LCC Surface Mount, 1 Channel
1.67
1.651
6.223
2.286
0.762
0.635
R = 0.2286
0.635
2.54
4.318
1.27
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 6 of 12
QC 88000-C001: 2013
®
ISOCOM LTD
**
4/5 Terminal Hybrid, 1 Channel
3.0
1.9
3.0
0.4
Device Marking
XXXXXXX
Isocom Part Number
Manufacturer
ISOCOM
XXXX
Date Code (XX year XX week)
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 7 of 12
QC 88000-C001: 2013
®
ISOCOM LTD
Hermetic Optocoupler Options
Option Description
10
Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is
available on commercial hi-rel product in 8 and 16 pin DIP
4.32 (0.17)
Max
0.51 (0.02)
1.14 (0.045)
2.29 (0.09)
Min
1.40 (0.055)
2.79 (0.11)
0.51 (0.02)
Max
4.32 (0.17)
Max
0.2 (0.008)
0.51 (0.2)
0.33 (0.013)
1.14 (0.045)
1.40 (0.055)
Min
7.36 (0.29)
2.29 (0.09)
0.51 (0.02)
Max
7.87 (0.31)
2.79 (0.11)
20
30
Solder Dip option
Surface mountable hermetic optocoupler with leads cut and bent for gull wing assembly. This option is
available on commercial and hi-rel product in 8 and 16 pin DIP.
4.57 (0.18)
Max
0.51 (0.02)
Min
2.29 (0.9)
2.79 (0.11)
1.4 (0.055)
1.65 (0.065)
0.51 (0.02)
Max
5 deg
Max
0.51 (0.02)
Min
4.57 (0.18)
Max
4.57 (0.18)
Max
0.2 (0.008)
0.33 (0.013)
1.4 (0.055)
2.29 (0.09)
2.79 (0.11)
1.65 (0.065)
0.51 (0.02)
Max
9.65 (0.38)
9.91 (0.39)
60
Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is
available on commercial hi-rel product in 8 and 16 pin DIP
3.81 (0.15)
Min
3.81 (0.15)
Max
0.2 (0.008)
0.33 (0.013)
0.51 (0.02)
Min
2.29 (0.09)
2.79 (0.11)
0.51 (0.02)
Min
1.02 (0.04)
Typ
2.29 (0.09)
2.79 (0.11)
7.36 (0.29)
7.87 (0.31)
1.14 (0.045)
1.25 (0.049)
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 8 of 12
QC 88000-C001: 2013
®
ISOCOM LTD
Absolute Maximum Ratings
Storage Temperature
-65°C to +150°C
Operating Temperature
-55°C to +125°C
Lead Soldering Temperature
Input-to-Output Isolation Voltage
260°C 1.6mm from case for 10S
1500VDC
500VDC for CH300
Input Diode
Forward DC Current
50mA
15mA
7V
For CH300
Reverse DC Voltage
5V
For CH300
3V
For CSM165
2V
For CS224
Peak forward Current
Power Dissipation
1.5mA
100mW
150mW
10µS duration
Derate linearly above 100°C at 1.6W/°C.
For CD500/501 andCSM165. Derate linearly above
100°C at 1.4W/°C for CD500/501, and at 1.6 W/°C for
CSM165
25mW
For CH300
Output Transistor
Collector-Emitter Voltage
50V
BVCEO
30V
For CH300
35V
For CS224
Emitter-Collector Voltage
Collector-Base Voltage
7V
70V
35V
BVECO
BVCBO For CS200/201 and CS224
For CS224
Collector Current
50mA
20mA
100mA
100mW
150mW
For CH300
t = 1mS
Collector Current
Power Dissipation
For CH300. Derate linearly above 100°C at 1.4W/°C
For CS200/201, CS224, CD500/501 and CSM165.
Derate linearly above 100°C at 1.4W/°C
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 9 of 12
QC 88000-C001: 2013
®
ISOCOM LTD
Electrical Characteristics
TA = 25°C U.O.S. (each channel where appropriate).
Input Diode Electrical Characteristics
Parameter
Symbol
Test Conditions
IF = 10mA
Device
Min
0.7
0.7
0.7
5
Type
1.18
1.10
1.29
-
Max
1.8
1.8
1.8
-
Units
V
(note 4)
Forward Voltage
VF
IF = 10mA, TA = 125°C
IF = 10mA, TA = -55°C
IR = 0.1mA
Reverse Breakdown
Voltage
VR
V
Reverse Current
Capacitance
IR
CIN
VR = 3V
V = 0, f = 1MHz
-
-
-
25
100
-
µA
pF
Output Detector Electrical Characteristics
Collector-Emitter
Breakdown Voltage
(See note 1 below)
Collector-Base Breakdown
Voltage
BVCEO
IC = 1mA
40
30
-
-
-
-
V
V
CH300
BVCBO
IB = 0.1mA
70
(See note 1 below)
Emitter-Collector
Breakdown Voltage
Emitter-Base Breakdown
Voltage
BVECO
BVEBO
ICEO
IE = 0.1mA
IB = 0.1mA
7
5
-
-
-
-
V
V
Collector-Emitter Leakage
Current
VCE = 20V, IF = 0, VCE = 15v IF = 0
VCE = 20V, IF = 0, TA = 125°C
CSM165
-
-
6
8
100
100
µA
µA
Coupled Electrical Characteristics
DC Current Transfer Ratio
(See note 3)
IF = 10mA, VCE = 5V
50
100
50
50
35
-
-
%
IC/IF
CS201
CS201
CS201
IF = 10mA, VCE = 5V, TA = 125°C
IF = 10mA, VCE = 5V, TA = -55°C
IF = 10mA, VCE = 5V; TA = -55°C-125°C
VCE = 15v, , IF2-4 = 10mA.
IF = 10mA, IC = 2.5mA
-
-
-
-
-
-
Optical Crosstalk
Collector-Emitter Saturation
Voltage
ICEOX
VCE
(Sat)
CSM165
250
0.3
0.9
0.25
5
µA
V
-
-
IF = 10mA, IC = 10mA
CSM165
CH300
0.4
IF = 2mA, IC = 0.2mA
Input to Output Capacitance CIO
VIO = 0, f = 1mhz (See note 2 below)
VIO = 500V (See note 2 below)
(See note 2 below)
-
-
3
pF
Ω
VDC
Input to Output Resistance
Isolation Voltage
RIO
VIO
1011
-
-
-
1500
500
CH300
Delay Time
Rise Time
Storage Time
Fall Time
Turn -on Time
Turn-off Time
td
tr
ts
tf
ton
toff
VCC = 5V, IC = 2mA
RL = 100Ohms
-
-
-
-
-
-
4.0
5.0
0.7
5.0
9
µS
µS
µS
µS
µS
µS
VCC = 5V, If = 5mA
RL = 1KOhms
25
Notes:
1. BVCEO and BVCBO can be selected to suit customer specifications.
2. Measured between input when leads 1, 2 and 3 are shorted together and output when leads 4, 5 and 6 are shorted together.
3. A higher CTR can be selected to suit customer specification as a standard part.
4. For Radiation Tolerant VF max = 2.0v
5. Parts of the same family will have the same specifications ie. CSM165 will be the same as CSM166
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 10 of 12
QC 88000-C001: 2013
®
ISOCOM LTD
Electrical Characteristics
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 11 of 12
QC 88000-C001: 2013
®
ISOCOM LTD
Switching Time Characteristics
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 12 of 12
QC 88000-C001: 2013
相关型号：
©2020 ICPDF网 联系我们和版权申明