IDPV-45-60 [MEANWELL]
45W PWM Output LED Driver;型号: | IDPV-45-60 |
厂家: | MEAN WELL ENTERPRISES CO., LTD. |
描述: | 45W PWM Output LED Driver |
文件: | 总6页 (文件大小:158K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
45W PWM Output LED Driver
IDPV-45 series
S&
E
SELV
■ Features
■ Applications
ꢀLED strip lighting
ꢀIndoor LED lighting
ꢀConstant Voltage PWM style output
with frequency 1KHz
ꢀPCB type design
ꢀLED decorative lighting
ꢀLED architecture lighting
ꢀBuilt-in active PFC function
ꢀNo load power consumption<0.5W(Blank-Type)
ꢀFunction options: 2 in 1 dimming (dim-to-off);
Auxiliary DC output
ꢀ3 years warranty
■ Description
IDPV-45 series is a 45W PCB type AC/DC LED driver featuring the constant voltage mode PWM style
output design. IDPV-45 operates from 90~295VAC and offers models with different rated voltage
ranging between 12V and 60V. Thanks to the high efficiency up to 90%, with the fanless design,
the entireseries is able to operate for -20℃~+40℃ ambient temperature under free air convection.
IDPV-45 is equipped with various function options, such as dimming methodologies, so as to provide
the design flexibility for LED lighting system.
■ Model Encoding
-
45
- 12
A
IDPV
Rated output voltage(12/24/36/48/60V)
Function options
Rated wattage
Series name
Type
Function
2 in 1 dimming (0~10VDC and 10V PWM)
2 in 1 dimming and Auxiliary DC output
Note
Blank
In Stock
In Stock
A
File Name:IDPV-45-SPEC 2018-01-15
45W PWM Output LED Driver
IDPV-45 series
SPECIFICATION
MODEL
IDPV-45 -12
IDPV-45 -24
IDPV-45 -36
36V
IDPV-45 -48
IDPV-45 -60
DC VOLTAGE
12V
24V
48V
60V
1.25A
3.0A
1.88A
45.12W
0.94A
45.12W
0.75A
45W
RATED CURRENT
RATED POWER
45W
36W
0~100%
10%
DIMMING RANGE
OUTPUT
VOLTAGE TOLERANCE
PWM FREQUENCY (Typ.)
SETUP TIME Note.3
AUXILIARY DC OUTPUT Note.4
1KHz( 20%)
500ms / 230VAC
1200ms/115VAC
Nominal 12V(deviation 11.4~12.6)@50mA for A-Type only
90 ~ 295VAC 127 ~ 417VDC
VOLTAGE RANGE Note.2
FREQUENCY RANGE
POWER FACTOR (Typ.)
(Please refer to "STATIC CHARACTERISTIC" section)
47 ~ 63Hz
PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC@full load
(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
THD< 20%(@load≧60%/115VAC,230VAC; @load≧75%/277VAC)
(Please refer to “TOTAL HARMONIC DISTORTION” section)
TOTAL HARMONIC DISTORTION
INPUT
88%
90%
EFFICIENCY (Typ.)
84%
88%
86%
AC CURRENT (Typ.)
INRUSH CURRENT(Typ.)
0.6A / 115VAC
0.4A / 230VAC
0.3A / 277VAC
COLD START 30A(twidth=150μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC
<0.75mA / 277VAC
MAX. No. of PSUs on 16A
CIRCUIT BREAKER
LEAKAGE CURRENT
<0.5W for Blank-Type, <1.2W for A-Type
NO LOAD POWER CONSUMPTION
SHORT CIRCUIT
Shut down O/P voltage, re-power on to recovery
105 ~ 115%
PROTECTION
ENVIRONMENT
OVER CURRENT
Protection type : Hiccup mode, recovers automatically after fault condition is removed
WORKING TEMP.
Ta=-20 ~ +40℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
20 ~ 90% RH non-condensing
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
-40 ~ +80℃, 10 ~ 95% RH
0.03%/℃ (0 ~ 40℃)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL8750,CSA C22.2 NO.250.13-12;ENEC EN61347-1 & EN61347-2-13 independent, EN62384,GB19510.1,GB19510.14 approved
I/P-O/P:3.75KVAC
SAFETY STANDARDS
WITHSTAND VOLTAGE
SAFETY &
EMC
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
MTBF
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55015, EN61000-3-2 Class C (@load≧60%) ; EN61000-3-3,GB17743,GB17625.1
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Line:1KV)
397.61K hrs min. MIL-HDBK-217F (25℃)
120*66.5*22mm (L*W*H)
OTHERS DIMENSION
PACKING
0.14Kg;81pcs/12.5Kg/ 1.32CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ ofambient temperature.
2. De-rating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details.
NOTE
3. Length ofset up time is measured at cold ifrst start. Turning ON/OFF the driver may lead to increase ofthe set up time.
4. Aux. 12V will be damaged with short circuit; It will not be available with dimming off or output no load condition.
5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be
affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
File Name:IDPV-45-SPEC 2018-01-15
45W PWM Output LED Driver
IDPV-45 series
DIMMING OPERATION
T
3.15AL/250VAC
/300VAC
ACL TB1
ACL
ACN
+
ACN
HS1
C107
TB2
DIM+
DIM-
Vo+
Vo-
I
※ Dimming principle for PWM style output
Dimming is achieved by varying the duty cycle of the output current.
ON
Output DC current
TON
T
Duty cycle(%) =
×100%
Output PWM frequency : 1KHz( 20%)
OFF
Io=0A
TON
T
※ 2 in 1 dimming function
◎ Applying additive 0 ~ 10VDC
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
+
+
Vo+
-
-
Vo-
DIM+
+
Additive Voltage
-
DIM-
“DO NOT connect "DIM- to Vo-”
0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
Dimming input: Additive voltage
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
◎ Applying additive 10V PWM signal (frequency range 300~3000Hz):
+
+
Vo+
-
-
Vo-
DIM+
Additive PWM signal
DIM-
“DO NOT connect "DIM- to Vo-”
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Duty cycle of additive 10V PWM signal dimming input
Note : 1. Min. duty cycle of output current is about 8% and the output current is not defined when 0%< Iout<8%.
2. The duty cycle of output current could drop down to 0% when dimming input is about 0Vdc or 10V PWM signal with 0% duty cycle.
File Name:IDPV-45-SPEC 2018-01-15
45W PWM Output LED Driver
IDPV-45 series
OUTPUT LOAD vs TEMPERATURE
100
80
70
60
40
20
(HORIZONTAL)
-20
-10
0
10
20
30
40
AMBIENT TEMPERATURE,Ta (℃)
STATIC CHARACTERISTIC
POWER FACTOR (PF) CHARACTERISTIC
100
1.00
for 12V model
for others
90
80
70
60
50
40
0.95
0.90
0.85
0.80
0.75
277(45W)
230(45W)
115(36W)
50%
60%
70%
80%
90%
100%
90
100
295
135
180 200 230
INPUT VOLTAGE (V)
LOAD
※De-rating is needed under low input voltage.
TOTAL HARMONIC DISTORTION (THD)
※ 60V Model
EFFICIENCY vs LOAD
IDPV-45 series possess superior working efficiency that up to 90% can
be reached in field applications.
※ 60V Model
91%
90%
89%
19.00%
17.00%
15.00%
13.00%
11.00%
9.00%
277(45W)
277(45W)
230(45W)
115(36W)
230(45W)
115(36W)
88%
87%
86%
85%
7.00%
5.00%
50%
60%
70%
80%
90%
100%
50%
60%
70%
80%
90%
100%
LOAD
LOAD
File Name:IDPV-45-SPEC 2018-01-15
45W PWM Output LED Driver
IDPV-45 series
BLOCK DIAGRAM
fosc : 70~150KHz
AUX+(for A-Type)
AUX-(for A-Type)
RECTIFIERS
RECTIFIERS
&
FILTER
EMI FILTER
&
RECTIFIERS
POWER
SWITCHING
Vo+
Vo-
I/P
CURRENT
LIMIT
DIM+
DIM-
O.L.P.
DETECTION
CIRCUIT
PWM&PFC
CONTROL
MECHANICAL SPECIFICATION
Unit:mm
※ Blank-Type
120
112
T
3.15AL/250VAC
/300VAC
ACL TB1
ACL
ACN
+
ACN
HS1
C107
TB2
DIM+
DIM-
Vo+
Vo-
I
Terminal Pin No. Assignment(TB1)
Terminal Pin No. Assignment(TB2)
Pin No.
Assignment
ACL
1
2
3
4
Pin No.
Assignment
DIM+
DIM-
ACL
1
2
3
4
ACN
Vo+
ACN
Vo-
File Name:IDPV-45-SPEC 2018-01-15
45W PWM Output LED Driver
IDPV-45 series
120
112
※ A-Type
T
3.15AL/250VAC
/300VAC
ACL TB1
ACL
ACN
+
ACN
HS1
C107
TB2
DIM+
DIM-
Vo+
Vo-
AUX+
AUX-
I
Terminal Pin No. Assignment(TB1)
Pin No.
Assignment
ACL
Terminal Pin No. Assignment(TB2)
1
2
3
4
Pin No.
Assignment
DIM+
Pin No.
Assignment
Vo-
ACL
1
2
3
4
5
6
ACN
DIM-
AUX+
ACN
Vo+
AUX-
INSTALLATION MANUAL
Please refer to : http://www.meanwell.com/manual.html
File Name:IDPV-45-SPEC 2018-01-15
相关型号:
©2020 ICPDF网 联系我们和版权申明