IDPV-45A-36 [MEANWELL]

45W PWM Output LED Driver;


型号：	IDPV-45A-36
厂家：	MEAN WELL ENTERPRISES CO., LTD.
描述：	45W PWM Output LED Driver
文件：	总6页 (文件大小：158K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

45W PWM Output LED Driver

IDPV-45 series

SELV

■ Features

■ Applications

ꢀLED strip lighting

ꢀIndoor LED lighting

ꢀConstant Voltage PWM style output

with frequency 1KHz

ꢀPCB type design

ꢀLED decorative lighting

ꢀLED architecture lighting

ꢀBuilt-in active PFC function

ꢀNo load power consumption<0.5W(Blank-Type)

ꢀFunction options: 2 in 1 dimming (dim-to-off);

Auxiliary DC output

ꢀ3 years warranty

■ Description

IDPV-45 series is a 45W PCB type AC/DC LED driver featuring the constant voltage mode PWM style

output design. IDPV-45 operates from 90～295VAC and offers models with different rated voltage

ranging between 12V and 60V. Thanks to the high efficiency up to 90%, with the fanless design,

the entireseries is able to operate for -20℃~+40℃ ambient temperature under free air convection.

IDPV-45 is equipped with various function options, such as dimming methodologies, so as to provide

the design flexibility for LED lighting system.

■ Model Encoding

- 12

IDPV

Rated output voltage(12/24/36/48/60V)

Function options

Rated wattage

Series name

Type

Function

2 in 1 dimming (0~10VDC and 10V PWM)

2 in 1 dimming and Auxiliary DC output

Note

Blank

In Stock

File Name:IDPV-45-SPEC 2018-01-15

45W PWM Output LED Driver

IDPV-45 series

SPECIFICATION

MODEL

IDPV-45 -12

IDPV-45 -24

IDPV-45 -36

36V

IDPV-45 -48

IDPV-45 -60

DC VOLTAGE

12V

24V

48V

60V

1.25A

3.0A

1.88A

45.12W

0.94A

45.12W

0.75A

45W

RATED CURRENT

RATED POWER

45W

36W

0~100%

10%

DIMMING RANGE

OUTPUT

VOLTAGE TOLERANCE

PWM FREQUENCY (Typ.)

SETUP TIME Note.3

AUXILIARY DC OUTPUT Note.4

1KHz( 20%)

500ms / 230VAC

1200ms/115VAC

Nominal 12V(deviation 11.4~12.6)@50mA for A-Type only

90 ~ 295VAC 127 ~ 417VDC

VOLTAGE RANGE Note.2

FREQUENCY RANGE

POWER FACTOR (Typ.)

(Please refer to "STATIC CHARACTERISTIC" section)

47 ~ 63Hz

PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC@full load

(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)

THD< 20%(@load≧60%/115VAC,230VAC; @load≧75%/277VAC)

(Please refer to “TOTAL HARMONIC DISTORTION” section)

TOTAL HARMONIC DISTORTION

INPUT

88%

90%

EFFICIENCY (Typ.)

84%

88%

86%

AC CURRENT (Typ.)

INRUSH CURRENT(Typ.)

0.6A / 115VAC

0.4A / 230VAC

0.3A / 277VAC

COLD START 30A(twidth=150μs measured at 50% Ipeak) at 230VAC; Per NEMA 410

32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC

<0.75mA / 277VAC

MAX. No. of PSUs on 16A

CIRCUIT BREAKER

LEAKAGE CURRENT

<0.5W for Blank-Type, <1.2W for A-Type

NO LOAD POWER CONSUMPTION

SHORT CIRCUIT

Shut down O/P voltage, re-power on to recovery

105 ~ 115%

PROTECTION

ENVIRONMENT

OVER CURRENT

Protection type : Hiccup mode, recovers automatically after fault condition is removed

WORKING TEMP.

Ta=-20 ~ +40℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)

20 ~ 90% RH non-condensing

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

-40 ~ +80℃, 10 ~ 95% RH

0.03%/℃ (0 ~ 40℃)

10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

UL8750,CSA C22.2 NO.250.13-12;ENEC EN61347-1 & EN61347-2-13 independent, EN62384,GB19510.1,GB19510.14 approved

I/P-O/P:3.75KVAC

SAFETY STANDARDS

WITHSTAND VOLTAGE

SAFETY &

EMC

ISOLATION RESISTANCE

EMC EMISSION

EMC IMMUNITY

MTBF

I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH

Compliance to EN55015, EN61000-3-2 Class C (@load≧60%) ; EN61000-3-3,GB17743,GB17625.1

Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Line:1KV)

397.61K hrs min. MIL-HDBK-217F (25℃)

120*66.5*22mm (L*W*H)

OTHERS DIMENSION

PACKING

0.14Kg;81pcs/12.5Kg/ 1.32CUFT

1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ ofambient temperature.

2. De-rating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details.

NOTE

3. Length ofset up time is measured at cold ifrst start. Turning ON/OFF the driver may lead to increase ofthe set up time.

4. Aux. 12V will be damaged with short circuit; It will not be available with dimming off or output no load condition.

5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be

affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

File Name:IDPV-45-SPEC 2018-01-15

45W PWM Output LED Driver

IDPV-45 series

DIMMING OPERATION

3.15AL/250VAC

/300VAC

ACL TB1

ACL

ACN

HS1

C107

TB2

DIM+

DIM-

Vo+

Vo-

※ Dimming principle for PWM style output

Dimming is achieved by varying the duty cycle of the output current.

Output DC current

TON

Duty cycle(%) =

×100%

Output PWM frequency : 1KHz( 20%)

OFF

Io=0A

T^ON

※ 2 in 1 dimming function

◎ Applying additive 0 ~ 10VDC

100%

90%

80%

70%

60%

50%

40%

30%

20%

10%

Vo+

Vo-

DIM+

Additive Voltage

DIM-

“DO NOT connect "DIM- to Vo-”

0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V

Dimming input: Additive voltage

100%

90%

80%

70%

60%

50%

40%

30%

20%

10%

◎ Applying additive 10V PWM signal (frequency range 300~3000Hz):

Vo+

Vo-

DIM+

Additive PWM signal

DIM-

“DO NOT connect "DIM- to Vo-”

0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

Duty cycle of additive 10V PWM signal dimming input

Note : 1. Min. duty cycle of output current is about 8% and the output current is not defined when 0%< Iout<8%.

2. The duty cycle of output current could drop down to 0% when dimming input is about 0Vdc or 10V PWM signal with 0% duty cycle.

File Name:IDPV-45-SPEC 2018-01-15

45W PWM Output LED Driver

IDPV-45 series

OUTPUT LOAD vs TEMPERATURE

100

(HORIZONTAL)

-20

-10

AMBIENT TEMPERATURE,Ta (℃)

STATIC CHARACTERISTIC

POWER FACTOR (PF) CHARACTERISTIC

100

1.00

for 12V model

for others

0.95

0.90

0.85

0.80

0.75

277(45W)

230(45W)

115(36W)

50%

60%

70%

80%

90%

100%

100

295

135

180 200 230

INPUT VOLTAGE (V)

LOAD

※De-rating is needed under low input voltage.

TOTAL HARMONIC DISTORTION (THD)

※ 60V Model

EFFICIENCY vs LOAD

IDPV-45 series possess superior working efficiency that up to 90% can

be reached in field applications.

※ 60V Model

91%

90%

89%

19.00%

17.00%

15.00%

13.00%

11.00%

9.00%

277(45W)

230(45W)

115(36W)

230(45W)

115(36W)

88%

87%

86%

85%

7.00%

5.00%

50%

60%

70%

80%

90%

100%

50%

60%

70%

80%

90%

100%

LOAD

File Name:IDPV-45-SPEC 2018-01-15

45W PWM Output LED Driver

IDPV-45 series

BLOCK DIAGRAM

fosc : 70~150KHz

AUX+(for A-Type)

AUX-(for A-Type)

RECTIFIERS

FILTER

EMI FILTER

RECTIFIERS

POWER

SWITCHING

Vo+

Vo-

I/P

CURRENT

LIMIT

DIM+

DIM-

O.L.P.

DETECTION

CIRCUIT

PWM&PFC

CONTROL

MECHANICAL SPECIFICATION

Unit:mm

※ Blank-Type

120

112

3.15AL/250VAC

/300VAC

ACL TB1

ACL

ACN

HS1

C107

TB2

DIM+

DIM-

Vo+

Vo-

Terminal Pin No. Assignment(TB1)

Terminal Pin No. Assignment(TB2)

Pin No.

Assignment

ACL

Pin No.

Assignment

DIM+

DIM-

ACL

ACN

Vo+

ACN

Vo-

File Name:IDPV-45-SPEC 2018-01-15

45W PWM Output LED Driver

IDPV-45 series

120

112

※ A-Type

3.15AL/250VAC

/300VAC

ACL TB1

ACL

ACN

HS1

C107

TB2

DIM+

DIM-

Vo+

Vo-

AUX+

AUX-

Terminal Pin No. Assignment(TB1)

Pin No.

Assignment

ACL

Terminal Pin No. Assignment(TB2)

Pin No.

Assignment

DIM+

Pin No.

Assignment

Vo-

ACL

ACN

DIM-

AUX+

ACN

Vo+

AUX-

INSTALLATION MANUAL

Please refer to : http://www.meanwell.com/manual.html

File Name:IDPV-45-SPEC 2018-01-15

相关型号：