MPM-90-24-ST [MEANWELL]
90W AC-DC High Reliable PCB-Mount Green Medical Power Module;型号: | MPM-90-24-ST |
厂家: | MEAN WELL ENTERPRISES CO., LTD. |
描述: | 90W AC-DC High Reliable PCB-Mount Green Medical Power Module PC |
文件: | 总4页 (文件大小:113K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
90W AC-DC High Reliable PCB-Mount Green Medical Power Module
MPM-90 series
(MPM-90)
(MPM-90-xxST)
EN 60601-1
IEC 60601-1
+ +
8
ANSI/AAMI ES60601-1
EN60601-1
IEC60601-1
TPTC004
■ Features
■ Applications
ꢀ3.43"x2.05" compact size
ꢀPortable medical device
ꢀMobile clinical workstation
ꢀMedical computer monitor
ꢀMedical examination instrument
ꢀPCB,chassis or screw terminal mounting version
ꢀMedical safety approved (2 x MOPP) according to
ANSI/AAMI ES60601-1 and IEC/EN60601-1
ꢀSuitable for BF application with appropriate system consideration
ꢀNo load power consumption<0.1W
ꢀExtremely low leakage current
ꢀWide operating temp. range -30 ~ +80℃
ꢀEMI Class B without additional components
ꢀIsolation Class Ⅱ
ꢀProtections: Short circuit / Overload / Over voltage
ꢀNo minimum load required
ꢀOperating altitude up to 4000 meters( Note.7)
ꢀ100W peak(10 sec.)
ꢀ3 years warranty
■ Description
MPM-90 is a 90W high density and small size (87x52x29.5mm) AC/DC PCB-mount module type medical
grade power supply . It features the operation for 80~264VAC, a low no load power consumption less
than 0.1W, a high efficiency up to 93%, Class
Ⅱ (no FG) double insulation, outstanding dissipation,
2~5G anti-vibration by model, high EMC performance, 4KVAC isolation, etc. The design observes IEC/EN60601-1
and ANSI/AAMI ES60601-1version three with 2 x MOPP level and ultra-low leakage current (<100μA). It is very
suitable for BF (patient contact) type medical device or relevant equipment.
■ Model Encoding
Blank : PCB mounting style
MPM - 90 - 12 ST
ST
: Screw terminal style
{
Output voltage
Rated wattage
Series name
File Name:MPM-90-SPEC 2020-01-15
90W AC-DC High Reliable PCB-Mount Green Medical Power Module
MPM-90 series
SPECIFICATION
MODEL
MPM-90-24
24V
MPM-90-12
12V
MPM-90-48
48V
MPM-90-15
DC VOLTAGE
15V
4.13A
3.75A
99W
Peak(10 sec.)
7.37A
2.07A
6.23A
CURRENT
6.7A
1.88A
5.67A
Convection
93.5W
99.2W
90.2W
240mVp-p
2.0%
Peak(10 sec.)Note.2
Convection
88.4W
80.4W
RATED
POWER
90W
85.05W
200mVp-p
2.0%
RIPPLE & NOISE (max.) Note.3 120mVp-p
150mVp-p
OUTPUT
VOLTAGE TOLERANCE Note.4
LINE REGULATION
2.0%
2.0%
0.5%
0.5%
0.5%
0.5%
0.5%
LOAD REGULATION
SETUP, RISE TIME
1.0%
0.5%
0.5%
1000ms, 30ms/230VAC
30ms/230VAC
1000ms, 30ms/115VAC at full load
10ms/115VAC at full load
HOLD UP TIME (Typ.)
80 ~ 264VAC
47 ~ 63Hz
92%
113 ~ 370VDC
VOLTAGE RANGE
FREQUENCY RANGE
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
Note.5
93%
92.5%
93%
INPUT
1.9A/115VAC
COLD START
1.1A/230VAC
30A/115VAC
INRUSH CURRENT (Typ.)
65A/230VAC
LEAKAGE CURRENT (max.) Note.6 Touch current <100 A/264VAC
μ
115% ~ 160% rated output power
OVERLOAD
Protection type : Hiccup mode, recovers automatically after fault condition is removed
25.2 ~ 32.4V
12.6 ~ 16.2V
15.8 ~ 20.3V
50.4 ~ 64.8V
PROTECTION
OVER VOLTAGE
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE
WORKING TEMP.
Protection type : Shut down o/p voltage, re-power on to recover
-30 ~ +80℃ (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
WORKING HUMIDITY
STORAGE TEMP.
-40 ~ +85℃
TEMP. COEFFICIENT
SOLDERING TEMPERATURE
0.03%/℃ (0 ~ 50℃)
ENVIRONMENT
260℃ 5℃/10sec.max.
Blank:10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
ST:10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes
VIBRATION
OPERATING ALTITUDE Note.7 4000 meters / OVCⅡ
IEC60601-1, EN60601-1, EAC TP TC 004, UL ANSI/AAMI ES60601-1(3.1 version), CAN/CSA-C22 3rd Edition approved;
SAFETY STANDARDS
Design refer to EN60335-1(by request)
Primary-Secondary: 2xMOPP
I/P-O/P:4KVAC
ISOLATION LEVEL
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
Parameter
Conducted
Radiated
Standard
Test Level / Note
Class B
EN55011 (CISPR11)
EN55011 (CISPR11)
EN61000-3-2
Class B
EMC EMISSION
Harmonic Current
Voltage Flicker
EN60601-1-2
Parameter
ESD
Class A
EN61000-3-3
-----
SAFETY &
EMC
(Note 8)
Standard
Test Level / Note
EN61000-4-2
Level 4, 15KV air ; Level 4, 8KV contact
Level 3, 10V/m( 80MHz~2.7GHz )
Table 9, 9~28V/m( 385MHz~5.78GHz )
EN61000-4-3
RF field susceptibility
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EFT bursts
Level 3, 2KV
EMC IMMUNITY
Surge susceptibility
Conducted susceptibility
Magnetic field immunity
Level 3, 1KV/Line-Line
Level 3, 10V
Level 4, 30A/m
>95% dip 0.5 periods, 30% dip 25 periods,
>95% interruptions 250 periods
Voltage dip, interruption
EN61000-4-11
MTBF
570.5Khrs min. MIL-HDBK-217F (25℃);
1514.81Khrs min. Telcordia TR/SR-332 (Bellcore) (25℃)
Screw terminal style : 109*52*33.5mm (L*W*H)
PCB mounting style : 0.197Kg;60pcs/12.8Kg/0.97CUFT Screw terminal style :0.219Kg;50pcs/12Kg/0.55CUFT
OTHERS
DIMENSION
PACKING
PCB mounting style : 87*52*29.5mm (L*W*H)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. 33% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power.
3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor.
4. Tolerance : includes set up tolerance, line regulation and load regulation.
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
6. Touch current was measured from primary input to DC output.
NOTE
7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
8. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still
meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
File Name:MPM-90-SPEC 2020-01-15
90W AC-DC High Reliable PCB-Mount Green Medical Power Module
MPM-90 series
Block Diagram
fosc : 70KHz
RECTIFIERS
&
RECTIFIERS
&
POWER
+V
o
EMI
I/P
SWITCHING
FILTER
-Vo
FILTER
FILTER
DETECTION
CIRCUIT
PWM
O.L.P.
CONTROL
O.V.P.
Derating Curve
100
75
230VAC
100VAC
50
25
-30
-25
-15
0
15
30
5055 60 70 80
(HORIZONTAL)
AMBIENT TEMPERATURE (℃)
Output Derating VS Input Voltage
100
90
80
70
60
50
40
80 95 100 115 120 140 160 180 200 220 240 264
INPUT VOLTAGE (VAC) 60Hz
File Name:MPM-90-SPEC 2020-01-15
90W AC-DC High Reliable PCB-Mount Green Medical Power Module
MPM-90 series
Mechanical Specification
Case No.IRM60 Unit:mm
ꢀPCB mounting style (MPM-90)
87
5.7
76
29.5
3.5 1mm
AC/N
AC/L
BOTTOM
VIEW
-Vo
+Vo
AC/L, AC/N P/N diameter:1ψ
+V
o
, -V
o
P/N diameter:2ψ
ꢀScrew terminal style (MPM-90-xxST)
52
33.5
33
6.7
7.5
AC/N AC/L
4-ψ3.5
TOP
VIEW
-Vo -Vo+Vo+Vo
5
5 5
Installation Manual
Please refer to : http://www.meanwell.com/manual.html
File Name:MPM-90-SPEC 2020-01-15
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明