NPF-90D [MEANWELL]
90W Single Output Switching Power Supply;型号: | NPF-90D |
厂家: | MEAN WELL ENTERPRISES CO., LTD. |
描述: | 90W Single Output Switching Power Supply |
文件: | 总6页 (文件大小:104K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
90W Single Output Switching Power Supply
NPF-90D series
110
F
M
M
SELV
IP67
■ Features
■ Applications
ꢀIndoor LED lighting
ꢀLED decorative lighting
ꢀLED architecture lighting
ꢀMoving sign
ꢀUniversal AC input / Full range (up to 305VAC)
ꢀBuilt-in active PFC function
ꢀHigh efficiency up to 90.5%
ꢀProtections: Short circuit / Over current / Over voltage
/ Over temperature
ꢀTunnel lighting
ꢀCooling by free air convection
ꢀFully isolated plasticcase
ꢀFully encapsulated with IP67 level
ꢀClass Ⅱ power unit, no FG
ꢀBuilt-in 3 in 1 dimming function (0~10Vdc or PWM signal or resistance)
ꢀSuitable for dry / damp / wet locations
ꢀNo load power consumption<0.5W
ꢀ5 years warranty
■ Description
NPF-90D is one 90W waterproof single-output LED power supply series. In addition to the fundamental
LED driving function, NPF-90D is equipped with built-in 3 in 1 dimming function (0~10Vdc, PWM signal or
resistance) that simplifies the brightness adjustment for system designers so as to achieve light reduction
and energy saving. The entire series adopts the universal input range from 90VAC to 305VAC and
incorporates a built-in PFC function. The enclosure design is a 94V-0 flame retardant plastic case. The
interior is fully potted with silicone that enhances the heat dissipation and allows the power supply to
meet the anti-vibration demand up to 5G; it also thus conforms to IP67 level, enabling NPF-90D to be
used in a highly dusty and highly humid harsh environment.
Providing a high efficiency up to 90.5% and a low no load power consumption below 0.5W, NPF-90D can
meet the energy saving demand for the new generation LED lighting. The class Ⅱ design (without FG pin)
and the double insulation weather-resistant cable (SJTW) make it convenient for users to flexibly install
on various types of lighting systems. The entire series can operate under the temperature between -40~
+70℃ and comply with the relevant global lighting safety certification.
■ Model Encoding
NPF - 90 D - 12
Output voltage
Built-in 3 in 1 dimming function
Output wattage
Series name
File Name:NPF-90D-SPEC 2015-11-30
90W Single Output Switching Power Supply
NPF-90D series
SPECIFICATION
MODEL
NPF-90D-12 NPF-90D-15 NPF-90D-20 NPF-90D-24 NPF-90D-30 NPF-90D-36 NPF-90D-42 NPF-90D-48 NPF-90D-54
36V
42V
DC VOLTAGE
12V
15V
20V
24V
30V
48V
54V
21.6 ~ 36V 25.2 ~ 42V
CONSTANT CURRENT REGION 7.2 ~ 12V 9 ~ 15V
12 ~ 20V
4.5A
14.4 ~ 24V 18 ~ 30V
28.8 ~ 48V 32.4 ~ 54V
2.5A
90W
2.15A
RATED CURRENT
RATED POWER
7.5A
90W
6A
3.75A
90W
3A
1.88A
1.67A
90.3W
90W
90W
90W
90.24W
90.18W
200mVp-p 250mVp-p
RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p
250mVp-p 350mVp-p
OUTPUT
VOLTAGE TOLERANCE Note.3
LINE REGULATION
4.0%
0.5%
1.5%
4.0%
0.5%
1.0%
4.0%
0.5%
0.5%
3.0%
0.5%
0.5%
3.0%
0.5%
0.5%
2.0%
0.5%
0.5%
1.0%
0.5%
0.5%
1.0%
0.5%
0.5%
1.0%
0.5%
0.5%
LOAD REGULATION
SETUP, RISE TIME Note.4 500ms, 80ms at 95% load 115VAC / 230VAC
HOLD UP TIME (Typ.)
VOLTAGE RANGE
16ms/230VAC
90 ~ 305VAC
47 ~ 63Hz
16ms/115VAC at full load
127 ~ 431VDC
FREQUENCY RANGE
POWER FACTOR (Typ.)
PF>0.98/115VAC, PF>0.96/230VAC, PF>0.94/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION THD< 20% when output loading≧60% at 115VAC/230VAC input and output loading≧75% at 277VAC input
INPUT
EFFICIENCY (Typ.)
88%
89%
90%
90%
89%
90%
90%
90%
90%
AC CURRENT (Typ.)
INRUSH CURRENT(Typ.)
0.95A / 115VAC
0.5A / 230VAC
0.4A / 277VAC
COLD START 60A(twidth=550 s measured at 50% Ipeak) at 230VAC
μ
MAX. No. of PSUs on 16A
CIRCUIT BREAKER
3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
<0.25mA / 277VAC
95 ~ 108%
OVER CURRENT
SHORT CIRCUIT
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Hiccup mode, recovers automatically after fault condition is removed
PROTECTION
15 ~ 17V
17.5 ~ 21V 23 ~ 27V
28 ~ 34V
34 ~ 40V
41 ~ 46V
46 ~ 54V
54 ~ 60V
59 ~ 66V
OVER VOLTAGE
Protection type : Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, re-power on to recover
-40 ~ +70℃ (Refer to "Derating Curve")
20 ~ 95% RH non-condensing
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
-40 ~ +80℃, 10 ~ 95% RH
ENVIRONMENT
0.03%/℃ (0 ~ 50℃)
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
UL8750, CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13, EN62384 independent, IP67 approved ;
Design refer to EN60335-1
SAFETY STANDARDS
SAFETY &
EMC
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
MTBF
I/P-O/P:3.75KVAC
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C (≧60% load) ; EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level(surge L- N : 2KV), criteria A
231.2K hrs min. MIL-HDBK-217F (25℃)
171*63*37.5mm (L*W*H)
OTHERS DIMENSION
PACKING
0.77Kg; 18pcs/14.9Kg/0.82CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel
capacitor.
NOTE
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
File Name:NPF-90D-SPEC 2015-11-30
90W Single Output Switching Power Supply
NPF-90D series
Block Diagram
PFC fosc : 50~120KHz
PWM fosc : 60~130KHz
RECTIFIERS
&
FILTER
EMI FILTER
&
RECTIFIERS
POWER
SWITCHING
PFC
+V
-V
I/P
CIRCUIT
DIM+
DIM-
O.L.P.
O.T.P.
O.L.P.
DETECTION
CIRCUIT
PWM & PFC
CONTROL
O.V.P.
Derating Curve
Static Characteristics
100
90
80
70
60
50
40
100
80
230VAC
Input only
60
50
40
20
(HORIZONTAL)
90 100 125 135 145 155 165 175 180 200 230 305
-40
-25 -10
0
15
30
50
60
70
INPUT VOLTAGE (V) 60Hz
AMBIENT TEMPERATURE (℃)
Power Factor Characteristic
Constant Current Mode
1.00
0.95
0.90
0.85
0.80
0.75
0.70
0.65
0.60
0.55
0.50
0.45
0.40
0.35
0.30
115VAC
230VAC
277VAC
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
(90W)
LOAD
File Name:NPF-90D-SPEC 2015-11-30
90W Single Output Switching Power Supply
NPF-90D series
EFFICIENCY vs LOAD (48V Model)
NPF-90D series possess superior working efficiency that up to 90.5% can be reached in field applications.
92%
91%
90%
89%
88%
87%
86%
85%
84%
83%
115VAC
230VAC
277VAC
82%
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
LOAD
DRIVING METHODS OF LED MODULE
This LED power supply is suggested to work in constant current mode area (CC) to drive the LEDs.
In the constant current region, the highest voltage at the output of the driver
depends on the configuration of the end systems.
Should there be any compatibility issues, please contact MEAN WELL.
100
Constant
Current area
60
(min)
Hiccup
Protection
100
50
Io(%)
Typical LED power supply I-V curve
File Name:NPF-90D-SPEC 2015-11-30
90W Single Output Switching Power Supply
NPF-90D series
DIMMING OPERATION
DIM+(Blue)
DIM-(White)
AC/L(Brown)
AC/N(Blue)
NPF-90D
+V(Red)
-V(Black)
※ Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or
0 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-.
※ Please DO NOT connect "DIM-" to "-V".
※ Reference resistance value for output current adjustment (Typical)
Single driver
Short 10KΩ 20KΩ 30KΩ 40KΩ 50KΩ 60KΩ 70KΩ 80KΩ 90KΩ 100KΩ
Short 10KΩ/N 20KΩ/N 30KΩ/N 40KΩ/N 50KΩ/N 60KΩ/N 70KΩ/N 80KΩ/N 90KΩ/N 100KΩ/N
OPEN
-----
Resistance
value
Multiple drivers
(N=driver quantity for synchronized
dimming operation)
Percentage of rated current
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100% 95%~108%
※ 0 ~ 10V dimming function for output current adjustment (Typical)
Dimming value
0V
1V
2V
3V
4V
5V
6V
7V
8V
9V
10V
OPEN
Percentage of rated current
0%
10%
20%
30%
40%
50%
60%
70%
80%
90% 100% 95%~108%
※ 10V PWM signal for output current adjustment (Typical): Frequency range:100Hz ~ 3KHz
Duty value
0%
0%
10%
10%
20%
20%
30%
30%
40%
40%
50%
50%
60%
60%
70%
70%
80%
80%
90% 100%
OPEN
Percentage of rated current
90% 100% 95%~108%
◎ Dimming Characteristic
95%~108% when DIM+/DIM- are open circuit.
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
Note
0%
0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N
0~10V
Duty cycle of 10V PWM (frequency range = 100~3KHz)
Short~100KΩ/N resistance (N=driver quantity for synchronized
dimming operation )
Dimming input
※ Note : 1. Min. dimming level is about 6%
2. The output current is not defined when 0%<Iout<6%
3. The output current could drop down to 0% when dimming input
is about 0KΩor 0Vdc, or 10V PWM signal with 0% duty cycle
File Name:NPF-90D-SPEC 2015-11-30
90W Single Output Switching Power Supply
NPF-90D series
Mechanical Specification
Case No.PWM-90P
Unit:mm
171
5
5
300 20
300 20
UL2464 18AWG×2C
AC/L(Brown)
AC/N(Blue)
DIM+(Blue)
DIM-(White)
85.5
SJTW 18AWG×2C
+V(Red)
-V(Black)
SJTW 16AWG×2C
5
5
※ T case: Max. Case Temperature.
Recommend Mounting Direction
Installation Manual
Please refer to : http://www.meanwell.com/webnet/search/InstallationSearch.html
File Name:NPF-90D-SPEC 2015-11-30
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明