MK6-6-I [MEDER]

Reed Sensors for PCB Mounting;


型号：	MK6-6-I
厂家：	MEDER ELECTRONIC
描述：	Reed Sensors for PCB Mounting PC
文件：	总5页 (文件大小：466K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Meder Electronic

MK6 Series

Reed Sensors for

PCB Mounting

DESCRIPTION

MK6 sensors are magnetically operated Reed

proximity switches for direct PCB mounting. The

sensor should be mounted on a fixed surface with

the actuating magnet on the moving surface.

Introduction or removal of the magnetic field

determines the closing and opening of the Reed

Switch. (2.54 mm PCB pin spacing, available with

different distances)

APPLICATIONS

• Telecommunications

Telephone hook switch, keyboard applications

• Domestic appliances

Door switch for washing machines, dishwashers,

microwave ovens, baking ovens, refrigerators

• Limit switch for low-power signals

Garage door controls, lever hoists, conveyors

• Lifts / elevators

FEATURES

• Form A, B, C and E (Latching) available

• High power switches available

• Various case sizes available

Position indicators

• Five operate sensitivities available

ORDER INFORMATION

MAGNETIC SENSITIVITY

PACKAGING

SIZE

MAGNETIC

SENSITIVITY

CLASS

PULL IN

SERIES

MK6 -

SENSITIVITY

AT RANGE

X -

5 - 10

10 - 15

15 - 20

20 - 25

25 - 30

B, C, D, E

B, C

C, H

D, I

E, K

A, B, C, D, E

H, I, K

OPTIONS

8 (Form A)

8 (Form C)

Part Number Example

MK6 - 4 - C

CONTACT

FORM

SERIES

4 is the packaging size

C is the magnetic sensitivity

MK6 - 10 -

OPTIONS

X *

Part Number Example

MK6 - 10 - E

* See footnote on following page.

E selects the latching option

www.willow.co.uk

Tel. +44 (0) 1342 835234 Fax. +44 (0) 1342 834306

MK6 Series

Meder Electronic

Reed Sensors for

PCB Mounting

DIMENSIONS

All dimensions in mm [inches]

* MK6-10-E is a magnetic latching sensor which is opened or closed by a passing magnet and remains in that state until a magnet

of opposite polarity or direction passes by again. The E refers to a latching sensor and does not represent the magnetic

sensitivity.

MK6-10-B is a normally closed sensor. The B refers to a latching sensor and does not represent the magnetic sensitivity.

www.willow.co.uk

Tel. +44 (0) 1342 835234 Fax. +44 (0) 1342 834306

Meder Electronic

MK6 Series

Reed Sensors for

PCB Mounting

CONTACT DATA

Switch Model -->

Contact 71

Form A, B, E

6, 7, 8, 10

Contact 80

Form A

All data at 20 C

Contact Form -->

Packaging styles -->

Contact Ratings

Conditions

Min. Typ. Max.

Min. Typ. Max. Units

Any DC combination of V & A

not to exceed their individual

max.'s

Contact Rating

Switching Voltage

Switching Current

Carry Current

DC or peak AC

w/ 0.5V & 10mA

200

0.5

170

0.5

1.25

150

0.5

Static Contact Resistance

200

mΩ

Measured w/ 0.5V & 50mA

1.5 ms after closure

Dynamic Contact Resistance

200

250

mΩ

Insulation Resistance across

Contacts

100 Volts applied

10¹⁰

10⁹

Ω

Voltage applied for 60 sec.

min.

Breakdown Voltage

Operate Time, incl. Bounce

Reset Time

225 *

210

VDC

Measured w/ 100% overdrive

0.5

0.1

0.6

0.1

Measured w/ no coil

suppression

Capacitance

@ 10kHz across contact

0.2

Contact Operation **

Must Operate Condition

Must Reset Condition

Steady state field

Environmental Data

Shock Resistance

1/2 sine wave duration 11ms

From 10 - 2000 Hz

Vibration Resistance

Ambient Temperature

Storage Temperature

Soldering Temperature

10 ⁰C/ minute max. allowable

5 sec. dwell

-20

-35

-20

-35

⁰C

260

Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive switch.

* Insulation resistance of 10¹²and breakdown voltage of 480 VDC is available.

** These ranges refer to the uncut / unmodified Reed Switches described in our Reed Switch section. Consult factory if more

detail is required.

www.willow.co.uk

Tel. +44 (0) 1342 835234 Fax. +44 (0) 1342 834306

MK6 Series

Meder Electronic

Reed Sensors for

PCB Mounting

CONTACT DATA

Switch Model -->

Contact 81 *

Form A

Contact 87

Form A

Contact 90

Form C

All data 20 ⁰C

Contact Form -->

Packaging styles -->

6, 7, 8

Contact Ratings

Conditions

Min.

Typ.

Max. Min.

Typ.

Max.

Min.

Typ.

Max. Units

Any DC combination of V & A

not to exceed their individual

max.'s

Contact Rating

Switching Voltage

Switching Current

Carry Current

DC or peak AC

w/ 0.5V & 10mA

0.5

1.0

200

0.5

175

0.25

1.2

0.5

Static Contact Resistance

150

mΩ

Measured w/ 0.5V & 50mA

1.5 ms after closure

Dynamic Contact Resistance

200

250

mΩ

Insulation Resistance across

Contacts

100 Volts applied

10⁹

Ω

Breakdown Voltage across

Contacts

Voltage applied for 60 sec.

min.

100

230

200

VDC

Operate Time, incl. Bounce

Reset Time

Measured w/ 100% overdrive

0.5

0.1

0.6

0.1

0.7

1.5

Measured w/ no coil

suppression

Capacitance

@ 10kHz across contact

0.2

1.0

Contact Operation **

Must Operate Condition

Must Reset Condition

Steady state field

Environmental Data

Shock Resistance

1/2 sine wave duration 11ms

From 10 - 2000 Hz

Vibration Resistance

Ambient Temperature

Storage Temperature

Soldering Temperature

10 ⁰C/ minute max. allowable

5 sec. dwell

-20

-35

-20

-35

-20

-35

⁰C

260

Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive switch.

Switch model 81 is used for sensitivity range A only.

** These ranges refer to the uncut / unmodified Reed Switches described in our Reed Switch section. Consult factory if more detail is required.

www.willow.co.uk

Tel. +44 (0) 1342 835234 Fax. +44 (0) 1342 834306

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Standex Electronics:

MK6-6-D

相关型号：