5SWO-FT-125.000-S [MERCURY]

Oscillator;
5SWO-FT-125.000-S
型号: 5SWO-FT-125.000-S
厂家: MERCURY UNITED ELECTRONICS INC    MERCURY UNITED ELECTRONICS INC
描述:

Oscillator

文件: 总3页 (文件大小:171K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
CLOCK OSCILLATORS  
“SWO” series  
Logic: TTL / HCMOS  
Wave Form: Square wave  
MERCURY  
Since 1973  
Besides low cost general purpose crystal clock oscillators Mercury also offers high quality and field-  
proven application-specific oscillators for applications such as  
CPU, graphics, multimedia A/V clocks  
MPEG / DVD / HDTV clocks  
Laser engine pixel / set-top clocks  
Spread spectrum low EMI clocks  
Fast Ethernet and Gigabit Ethernet clocks  
NTSC / PAL encoder/decoder clocks  
PLL / synthesizer clocks  
Fibre channel and ADSL clocks  
OC-3, OC-12, OC-48 and OC-192 clocks SONET / SDH / ATM clocks  
Mercury has the right oscillators to meet your specifications and your applications.  
“SWO” Series General Specifications  
TA=+25°C, VDD at specified voltage, CL=15 pF  
Input Voltage (VDD)  
Mercury Model  
Frequency Range  
VDD = +3.3 V D.C. ±10%  
3SWO  
VDD =+5.0 V D.C.±10%  
5SWO  
1.0 ~ 125.0 MHz  
TTL / HCMOS  
4.5 V min.  
1.0 ~125.0 MHz  
TTL / HCMOS  
2.97 V min.  
Output Logic  
Output Voltage HIGH “1”  
Output Voltage LOW “0”  
Rise Time / Fall Time  
(0.1VDD 0.9 VDD)  
0.33 V max.  
0.5 V max.  
7 n sec. max.  
10 n sec. max.  
TTL load  
CMOS load  
10 LS TTL gates max.  
15 pF  
10 LS TTL gates max.  
15 pF  
Fanout  
1.8 ~ 32 MHz: 15 mA max.  
32+~50 MHz: 16.5 mA max.  
50+~100 MHz: 35 mA max.  
1.9 ~ 32 MHz: 25 mA max.  
32+~50 MHz: 35 mA max.  
50+~100 MHz: 40 mA max.  
Current Consumption  
Commercial  
(0°C to +70°C)  
±25 ppm over 0°C to +70°C (Stability code is “A”)  
±50 ppm over 0°C to +70°C (Stability code is “B”)  
±100 ppm over 0°C to +70°C (Stability code is “C”)  
If non-standard please enter the desired stability after “C”. For example “C20”  
represents ±20 ppm over 0 to +70°C  
Temperature code  
Frequency  
is ‘C”  
Stability(1)  
±25 ppm over -40°C to +85°C (Stability code is “D”)  
±50 ppm over -40°C to +85°C (Stability code is “E”)  
±100 ppm over -40°C to +85°C (Stability code is “F”)  
If non-standard please enter the desired stability after “I”. For example  
Industrial  
(-40°C to +85°C)  
Temperature code  
is ‘I”  
I20” represents ±20 ppm over -40 to +85°C  
Duty Cycle  
50%±10%. (50±5% is also available)  
1.0 ~ 32 MHz: 5 m sec. max.  
32+ ~ 125 MHz: 10 m sec. max.  
Start-up Time (Ts)  
Note: Pad No. 1 is Tri-State by default for all SWO series. That is:  
Pad 1  
Connection  
The output (pad No. 3) is active if no connection or voltage of 2.2V or greater is applied to pad 1.  
The output (pad No. 3) is high impedance when voltage of 0.8V or lower is applied to pad 1.  
Disable time is 150 n sec. max.; Enable time is 10 m sec. max.  
±5 ppm per year max.  
Aging  
(1)Inclusive of 25°C tolerance, operating temperature range, ±10% input voltage variation, load change, aging,  
shock and vibration.  
MERCURY  
www.mercury-crystal.com  
Taiwan: TEL (886)-2-2695-7099, FAX (886)-2-2695-7473, e-mail: sales-tw@mercury-crystal.com  
U.S.A.: TEL (1)-909-466-0427, FAX (1)-909-466-0762, e-mail: sales-us@mercury-crystal.com  
MERCURY  
Page 1 of 3  
Date: Jan. 23, 2005  
Rev. 2  
CLOCK OSCILLATORS  
“SWO” series  
Logic: TTL / HCMOS  
Wave Form: Square wave  
MERCURY  
Since 1973  
Environmental Performance Specifications  
RoHS Compliance  
Pb (lead) free  
Storage temp. range -50°C to +100°C  
Humidity  
Hermetic seal  
85% RH, 85°C, 48 hours  
Leak rate 2x10-8 ATM-cm3/sec max.  
Solderability  
Reflow  
MIL-STD-202F method 208E  
260°C for 10 sec.  
Vibration  
Shock  
MIL-STD-202F method 204, 35G, 50 to 2000 Hz  
MIL-STD-202F method 213B, test condi. E, 1000GG ½ sine wave  
Part Number Format and Example:  
Example: 3HSWO-BT-80.000  
Explanation: SWO clock oscillator, +3.3 V supply voltage, ±50 ppm frequency stability over 0 to +70°C, 80.000 MHz, Tri-  
state option on pad 1.  
"
3
n
"
B
p
"
T
q
"
80.000  
r
"
S
s
SWO  
o
n: Voltage codes: “25” for +2.5 V; “3” for +3.3 V  
o: Product series p: Frequency stability code: “A” ~ “F” or custom. See table above.  
q: “T”: Tri-state option on pad 1 (Tri-state is standard if not specified), leave blank if tri-state is not required.  
r Frequency in MHz s Duty cycle option: Blank for 50%±10%. “S” for 50%±5%.  
SWO OUTPUT WAVEFORM:  
SWO Test Circuit:  
Tf  
Tr  
90% Vcc  
i
VOH  
10% Vcc max.  
VOL  
TH  
T
Duty Cycle = (TH / T)x100%  
MERCURY  
Page 2 of 3  
Date: Jan. 23, 2005  
Rev. 2  
CLOCK OSCILLATORS  
“SWO” series  
Logic: TTL / HCMOS  
Wave Form: Square wave  
MERCURY  
Since 1973  
SWO Package Dimensions and Recommended Pad Layout:  
unit mm[inches]  
7.00±0.15  
2.2[0.086]  
0.6  
1.4  
5.08[0.200]  
5.08[0.200]  
RECOMMENDED REFLOW SOLDERING PROFILE  
MERCURY  
Page 3 of 3  
Date: Jan. 23, 2005  
Rev. 2  

相关型号:

5T2010BBGI

PLL Based Clock Driver, 5T Series, 10 True Output(s), 0 Inverted Output(s), PBGA144, GREEN, PLASTIC, BGA-144
IDT

5T2010BBGI8

PLL Based Clock Driver, 5T Series, 10 True Output(s), 0 Inverted Output(s), PBGA144, GREEN, PLASTIC, BGA-144
IDT

5T2010BBI

PLL Based Clock Driver, 5T Series, 10 True Output(s), 0 Inverted Output(s), PBGA144, PLASTIC, BGA-144
IDT

5T2010BBI8

PLL Based Clock Driver, 5T Series, 10 True Output(s), 0 Inverted Output(s), PBGA144, PLASTIC, BGA-144
IDT

5T2010NLGI

VFQFPN-68, Tray
IDT

5T2010NLGI8

VFQFPN-68, Reel
IDT

5T2010NLI

Low Skew Clock Driver, PQCC68
IDT

5T2010NLI8

Low Skew Clock Driver, PQCC68
IDT

5T2110BBI8

Clock Driver, PBGA144
IDT

5T2110NLGI8

PLL Based Clock Driver, 5T Series, 5 True Output(s), 0 Inverted Output(s), PQCC68, GREEN, PLASTIC, VFQFP-68
IDT

5T2110NLI8

Clock Driver, PQCC68
IDT

5T32011

Peripheral IC
ETC