DSC511-03DM5-R0001T [MICREL]
Crystal-less Two Output Clock Generator;型号: | DSC511-03DM5-R0001T |
厂家: | MICREL SEMICONDUCTOR |
描述: | Crystal-less Two Output Clock Generator 时钟 光电二极管 外围集成电路 |
文件: | 总5页 (文件大小:528K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DSC511-03
Crystal-less Two Output Clock Generator
General Description
Features
The DSC511-03 is a crystal-less, two output
clock generator. The clock generator uses
proven silicon MEMS technology to provide
excellent jitter and stability over a wide
range of supply voltages and temperatures.
By eliminating the external quartz crystal,
Low RMS Phase Jitter: <1 ps (typ)
High Stability: ±10, ±25, ±50 ppm
Wide Temperature Range
o Automotive: -55° to 125° C
o Ext. Industrial: -40° to 105° C
o Industrial: -40° to 85° C
MEMS
clock
generators
significantly
enhance reliability and accelerate product
development, while meeting stringent clock
performance criteria for a variety of
communications, storage, and networking
applications.
o Ext. commercial: -20° to 70° C
High Supply Noise Rejection: -50 dBc
Two Independent CMOS Outputs
Short Lead Times: 2 Weeks
DSC511-03 has a Output Enable / Disable
feature allowing it to disable the outputs
when OE is low. The device is available in a
space saving 6 pin 2.5 x 2.0 mm QFN
package.
Wide Freq. Range:
o CMOS Output: 2.3 to 170 MHz
Miniature Footprint of 2.5 x 2.0 mm
Excellent Shock & Vibration Immunity
o Qualified to MIL-STD-883
High Reliability
o 20x better MTF than quartz oscillators
Supply Range of 2.25 to 3.6 V
Lead Free & RoHS Compliant
Block Diagram
Control Circuitry
Applications
CLK0
Output
Control
and
MEMS
PLL
Consumer Electronics
Solid State Storage
Divider
OE
CLK1
Storage Area Networks
Passive Optical Networks
o EPON, 10G-EPON, GPON, 10G-PON
Ethernet
o 1G, 10GBASE-T/KR/LR/SR, and FCoE
HD/SD/SDI Video & Surveillance
Industrial and Medical
______________________________________________________________________________________________________________________________________________
DSC511-03 Page 1 MK-QB-P-D-130103-01-1
Crystal-less Two Output PCIe Clock Generator
DSC511-03
Specifications (Unless specified otherwise: T=25° C, VDD =3.3V)
Parameter
Supply Voltage1
Supply Current
Supply Current2
Condition
Min.
2.25
Typ.
Max.
3.6
23
Unit
V
mA
VDD
IDD
EN pin low – outputs are disabled
21
32
EN pin high – outputs are enabled
CL=15pF, FO1=FO2=125 MHz
Includes frequency variations due
to initial tolerance, temp. and
power supply voltage
IDD
mA
±10
±25
±50
±5
5
Frequency Stability
Aging
Startup Time3
Δf
ppm
Δf
tSU
1 year @25°C
T=25°C
ppm
ms
Input Logic Levels
Input logic high
Input logic low
VIH
VIL
0.75xVDD
-
-
V
0.25xVDD
Output Disable Time4
Output Enable Time
Pull-Up Resistor2
tDA
5
ns
ns
tEN
20
Pull-up exists on all digital IO
I=±6mA
40
kΩ
Output Logic Levels
Output logic high
Output logic low
Output Transition time4
Rise Time
VOH
VOL
0.9xVDD
-
-
V
0.1xVDD
20% to 80%
CL=15pf
tR
tF
1.1
1.4
2
2
ns
Fall Time
Commercial/Industrial temp range
Automotive temp range
2.3
45
170
100
55
Frequency
f0
MHz
Output Duty Cycle
Period Jitter5
SYM
JPER
%
psRMS
FO1=FO2=125 MHz
3
200kHz to 20MHz @ 125MHz
100kHz to 20MHz @ 125MHz
12kHz to 20MHz @ 125MHz
0.3
0.38
1.7
Integrated Phase Noise
JCC
psRMS
2
Notes:
1.
Pin 4 VDD should be filtered with 0.01uf capacitor.
2.
3.
4.
5.
Output is enabled if Enable pad is floated or not connected.
tsu is time to 100PPM stable output frequency after VDD is applied and outputs are enabled.
Output Waveform and Test Circuit figures below define the parameters.
Period Jitter includes crosstalk from adjacent output.
Absolute Maximum Ratings
Item
Min
-0.3
-0.3
-
Max
Unit
V
Condition
Supply Voltage
Input Voltage
Junction Temp
Storage Temp
Soldering Temp
+4.0
VDD+0.3
+150
V
°C
°C
°C
V
-55
-
+150
+260
40sec max.
ESD
HBM
MM
-
4000
400
CDM
1500
______________________________________________________________________________________________________________________________________________
DSC511-03 Page 2 MK-QB-P-D-130103-01-1
Crystal-less Two Output PCIe Clock Generator
DSC511-03
Solder Reflow Profile
20-40
Sec
260°C
217°C
200°C
60-150
Sec
Reflow
60-180
Sec
150°C
Cool
Pre heat
25°C
Time
8 min max
6 QFN
MSL 1 @ 260°C refer to JSTD-020C
Ramp-Up Rate (200°C to Peak Temp)
Preheat Time 150°C to 200°C
Time maintained above 217°C
Peak Temperature
Time within 5°C of actual Peak
Ramp-Down Rate
3°C/Sec Max.
60-180 Sec
60-150 Sec
255-260°C
20-40 Sec
6°C/Sec Max.
8 min Max.
Time 25°C to Peak Temperature
OE Function and Output Waveform: LVCMOS
tR
tF
VOH
675 mV
Output
Enable
VOL
tEN
1/fo
tDA
VIH
VIL
______________________________________________________________________________________________________________________________________________
DSC511-03 Page 3 MK-QB-P-D-130103-01-1
Crystal-less Two Output PCIe Clock Generator
DSC511-03
Ordering Information
DSC511-03 D I 2 - R0001 T
Package
D: 2520 6pin
Packing
T: Tape & Reel
: Tube
Temp Range
E: -20 to 70
I: -40 to 85
L: -40 to 105
M: -55 to 125
Frequency
Rxxxx
Stability
1: ±50ppm
2: ±25ppm
5: ±10ppm
Output Clock Frequencies
Table 2 lists the standard default frequency configurations and the associated ordering information
to be used in conjunction with the ordering code. Customer defined combinations are available.
Table 2. Pre-programmed output frequency pairs
CLK 1
(MHz)
CLK 2
(MHz)
Ordering Info
R0001
25.0000
-
25.0000
-
RXXXX
______________________________________________________________________________________________________________________________________________
DSC511-03 Page 4 MK-QB-P-D-130103-01-1
Crystal-less Two Output PCIe Clock Generator
DSC511-03
Package Dimensions
EXTERNAL DIMENSIONS
RECOMMENDED SOLDER PAD LAYOUT
Units: mm [ inches]
Units: mm [ inches]
2.5±0.05 [0.098±0.002]
0.7±0.1 [0.079±0.002]
0.825 [0.032]
0.6 REF
Via to
Power Trace
6
5
4
4
5
6
0.375
Via to Ground
Plane
0.535 REF
0.765±0.1
0.7 REF
6
5
2
4
3
2
1
1
2
3
3
1
0.7±0.1 [0.079±0.002]
2.0±0.05 [0.079±0.002]
0.65±0.05 [0.026±0.002]
0.25±0.05 [0.099±0.002]
0.85
0.65±0.05 [0.026±0.002]
0.25±0.05 [0.099±0.002]
No.
1
Pin Terminal
Enable
N/C
0.85±0.05
2
3
Ground
CLK0
4
5
CLK1
6
VDD
Disclaimer:
Micrel makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This information
is not intended as a warranty and Micrel does not assume responsibility for its use. Micrel reserves the right to change circuitry, specifications and
descriptions at any time without notice. No license, whether express, implied, arising by estoppel or otherwise, to any intellectual property rights is granted
by this document. Except as provided in Micrel’s terms and conditions of sale for such products, Micrel assumes no liability whatsoever, and Micrel disclaims
any express or implied warranty relating to the sale and/or use of Micrel products including liability or warranties relating to fitness for a particular purpose,
merchantability, or infringement of any patent, copyright or other intellectual property right.
Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can
reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the
body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or
sale of Micrel Products for use in life support appliances, devices or systems is a Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any
damages resulting from such use or sale.
MICREL, Inc.
Phone: +1 (408) 944-0800
●
●
2180 Fortune Drive,
Fax: +1 (408) 474-1000
San Jose, California
95131
●
●
USA
●
Email: hbwhelp@micrel.com
www.micrel.com
______________________________________________________________________________________________________________________________________________
DSC511-03
Page 5
MK-QB-P-D-130103-01-1
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明