SY100EL57LZCTR [MICREL]

3.3V 4:1 DIFFERENTIAL MULTIPLEXER; 3.3V 4 : 1差分多路复用器
SY100EL57LZCTR
型号: SY100EL57LZCTR
厂家: MICREL SEMICONDUCTOR    MICREL SEMICONDUCTOR
描述:

3.3V 4:1 DIFFERENTIAL MULTIPLEXER
3.3V 4 : 1差分多路复用器

解复用器 逻辑集成电路 光电二极管
文件: 总4页 (文件大小:65K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
3.3V 4:1 DIFFERENTIAL  
MULTIPLEXER  
SY100EL57L  
FEATURES  
DESCRIPTION  
3.3V power supply  
The SY100EL57L is a full differential 4:1 multiplexer.  
By leaving the SEL1 line open (pulled LOW via the input  
pulldown resistors) the device can also be used as a  
differential 2:1 multiplexer with SEL0 input selecting between  
D0 and D1. The fully differential architecture of the EL57L  
makes it ideal for use in low skew applications such as  
clock distribution.  
Useful as either 4:1 or 2:1 multiplexer  
VBB output for single-ended operation  
75Kinternal input pulldown resistors  
Available in 150 mil 16-pin SOIC package  
The SEL1 is the most significant select line. The binary  
number applied to the select inputs will select the same  
numbered data input (i.e., 00 selects D0).  
Multiple VBB outputs are provided for single-ended or  
AC coupled interfaces. In these scenarios, the VBB output  
should be connected to the data bar inputs and bypassed  
via a 0.01µF capacitor to ground. Note that the VBB output  
can source/sink up to 0.5mA of current without upsetting  
the voltage level.  
PIN CONFIGURATION/BLOCK DIAGRAM  
VCC  
SEL0 SEL1  
Q
Q
V
BB1  
VBB2  
V
EE  
9
16  
15  
14  
13  
12  
11  
10  
4:1  
1
2
3
4
5
6
7
8
D0  
D0  
D1  
D1  
D2  
D2  
D3  
D3  
SOIC  
TOP VIEW  
TRUTH TABLE  
PIN NAMES  
Pin  
Function  
Differential Data Inputs  
Mux Select Inputs  
Reference Outputs  
Data Outputs  
SEL1  
SEL0  
DATA OUT  
D0-3  
SEL0, 1  
VBB1, 2  
Q
L
L
L
H
L
D0  
D1  
D2  
D3  
H
H
H
Rev.: A  
Amendment: /0  
Issue Date: March, 1999  
1
Micrel  
SY100EL57L  
ABSOLUTE MAXIMUM RATINGS(1)  
Symbol  
VEE  
Rating  
Value  
Unit  
V
Power Supply (VCC = 0V)  
Input Voltage (VCC = 0V)  
–7.0 to 0  
0 to –4.3  
VI  
V
IOUT  
Output Current  
- Continuous  
- Surge  
50  
mA  
100  
TA  
Operating Temperature Range  
Operating Range(1,2)  
–40 to +85  
°C  
VEE  
–4.0 to –3.0  
V
NOTES:  
1. ABSOLUTE MAXIMUM RATINGS, beyond which, device life may be impaired, unless otherwise specified on an individual data sheet.  
2. Parametric values specified at:  
Power Supply Range  
100EL57L Series: -3.0V to -3.8V.  
100EL DC CHARACTERISTICS  
VEE = VEE (Min) - VEE (Max); VCC = GND(1)  
TA = –40°C  
TA = 0°C to 85°C  
Symbol  
VOH  
VOL  
Parameter  
Min.  
-1085  
-1830  
-1095  
Typ.  
Max.  
Min.  
Typ.  
Max.  
Unit  
mV  
mV  
mV  
mV  
mV  
mV  
µA  
Condition  
Output HIGH Voltage  
Output LOW Voltage  
Output HIGH Voltage  
Output LOW Voltage  
Input HIGH Voltage  
Input LOW Voltage  
Input LOW Current  
-1005  
-880 -1025  
-955  
-880  
VIN = VIH (Max)or VIL (Min)  
VIN = VIH (Max)or VIL (Min)  
VIN = VIH (Min)or VIL (Max)  
VIN = VIH (Min)or VIL (Max)  
-1695 -1555 -1810 -1705 -1620  
VOHA  
VOLA  
VIH  
-1035  
-1555  
-1610  
-880  
-1475  
-1165  
-1810  
0.5  
-880 -1165  
-1475 -1810  
VIL  
IIL  
0.5  
VIN = VIL (Max)  
NOTE:  
1. Outputs are terminated through a 50resistor to -2.0V except where otherwise specified on the individual data sheets.  
DC ELECTRICAL CHARACTERISTICS  
VEE = VEE (Min) - VEE (Max); VCC = GND  
TA = –40°C  
TA = 0°C  
TA = +25°C  
TA = +85˚C  
Symbol  
IEE  
Parameter  
Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit  
Power Supply Current  
-15  
-24  
-15  
-24  
-15  
-24  
-15  
-27  
mA  
V
VBB  
Output Reference  
Voltage  
-1.38  
-1.26 -1.38  
-1.26 -1.38  
-1.26 -1.38  
-1.26  
IIH  
Input HIGH Current  
150  
150  
150  
150  
µA  
2
Micrel  
SY100EL57L  
AC ELECTRICAL CHARACTERISTICS  
VEE = VEE (Min) - VEE (Max); VCC = GND  
TA = –40°C  
TA = 0°C  
TA = +25°C  
TA = +85˚C  
Symbol  
Parameter  
Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit  
tPLH  
tPHL  
Propagation Delay  
DATA to Q/Q  
SEL to Q/Q350  
ps  
350  
600  
550  
350  
350  
600  
550  
350  
360  
610  
560  
380  
380  
630  
580  
50  
tskew  
VPP  
Input Skew DATA to Q  
50  
50  
50  
ps  
Minmum Input Swing  
DATA  
mV  
150  
-2.0  
150  
150  
150  
VCMR  
Common Mode Range  
DATA  
V
-0.4  
575  
-2.0  
125  
-0.4  
520  
-2.0  
125  
-0.4  
520  
-2.0  
125  
-0.4  
520  
tr  
tf  
Output Rise/Fall Times Q 125  
(20% - 80%)  
ps  
PRODUCT ORDERING CODE  
Ordering  
Code  
Package  
Type  
Operating  
Range  
SY100EL57LZC  
Z16-2  
Z16-2  
Commercial  
Commercial  
SY100EL57LZCTR  
3
Micrel  
SY100EL57L  
16 LEAD SOIC .150" WIDE (Z16-2)  
Rev. 02  
MICREL-SYNERGY 3250 SCOTT BOULEVARD SANTA CLARA CA 95054 USA  
TEL + 1 (408) 980-9191 FAX + 1 (408) 914-7878 WEB http://www.micrel.com  
This information is believed to be accurate and reliable, however no responsibility is assumed by Micrel for its use nor for any infringement of patents or  
other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent right of Micrel Inc.  
© 2000 Micrel Incorporated  
4

相关型号:

SY100EL57LZG

3.3V 4:1 DIFFERENTIAL MULTIPLEXER
MICREL

SY100EL57LZG

100EL SERIES, 4 LINE TO 1 LINE MULTIPLEXER, COMPLEMENTARY OUTPUT, PDSO16
MICROCHIP

SY100EL57LZG-TR

100EL SERIES, 4 LINE TO 1 LINE MULTIPLEXER, COMPLEMENTARY OUTPUT, PDSO16
MICROCHIP

SY100EL57LZGTR

3.3V 4:1 DIFFERENTIAL MULTIPLEXER
MICREL

SY100EL57LZI

3.3V 4:1 DIFFERENTIAL MULTIPLEXER
MICREL

SY100EL57LZI

Multiplexer, 100EL Series, 1-Func, 4 Line Input, 1 Line Output, Complementary Output, ECL, PDSO16, 0.150 INCH, SOIC-16
MICROCHIP

SY100EL57LZITR

3.3V 4:1 DIFFERENTIAL MULTIPLEXER
MICREL

SY100EL57L_06

3.3V 4:1 DIFFERENTIAL MULTIPLEXER
MICREL

SY100EL57ZC

4:1 DIFFERENTIAL MULTIPLEXER
MICREL

SY100EL57ZCTR

4:1 DIFFERENTIAL MULTIPLEXER
MICREL

SY100EL57ZCTR

Multiplexer, 100EL Series, 1-Func, 4 Line Input, 1 Line Output, Complementary Output, ECL, PDSO16
MICROCHIP

SY100EL57ZG

4:1 DIFFERENTIAL MULTIPLEXER
MICREL