93C86CT-E/MCG [MICROCHIP]
1K X 16 MICROWIRE BUS SERIAL EEPROM, PDSO8, 2 X 3 MM, 0.90 MM HEIGHT, LEAD FREE, PLASTIC, MO-229VCED-2, DFN-8;型号: | 93C86CT-E/MCG |
厂家: | MICROCHIP |
描述: | 1K X 16 MICROWIRE BUS SERIAL EEPROM, PDSO8, 2 X 3 MM, 0.90 MM HEIGHT, LEAD FREE, PLASTIC, MO-229VCED-2, DFN-8 可编程只读存储器 电动程控只读存储器 电可擦编程只读存储器 时钟 光电二极管 内存集成电路 |
文件: | 总28页 (文件大小:475K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
93AA86A/B/C, 93LC86A/B/C,
93C86A/B/C
16K Microwire Compatible Serial EEPROM
Device Selection Table
Part Number
VCC Range
ORG Pin
PE Pin
Word Size
Temp Ranges
Packages
93AA86A
93AA86B
93LC86A
93LC86B
93C86A
1.8-5.5
1.8-5-5
2.5-5.5
2.5-5.5
4.5-5.5
4.5-5.5
1.8-5.5
2.5-5.5
4.5-5.5
No
No
No
No
8-bit
16-bit
I
OT
I
OT
No
No
8-bit
I, E
I, E
I, E
I, E
I
OT
No
No
16-bit
OT
No
No
8-bit
OT
93C86B
No
No
16-bit
OT
93AA86C
93LC86C
93C86C
Yes
Yes
Yes
Yes
Yes
Yes
8 or 16-bit
8 or 16-bit
8 or 16-bit
P, SN, ST, MS, MC
P, SN, ST, MS, MC
P, SN, ST, MS, MC
I, E
I, E
Features:
Description:
• Low-power CMOS technology
The Microchip Technology Inc. 93XX86A/B/C devices
are 16K bit low-voltage serial Electrically Erasable
PROMs (EEPROM). Word-selectable devices such as
the 93XX86C are dependent upon external logic
levels driving the ORG pin to set word size. In the
SOT-23 package, the 93XX86A devices provide
dedicated 8-bit memory organization, while the
93XX86B devices provide dedicated 16-bit memory
organization. A Program Enable (PE) pin allows the
user to write-protect the entire memory array.
Advanced CMOS technology makes these devices
ideal for low-power, nonvolatile memory applications.
The entire 93XX Series is available in standard
packages including 8-lead PDIP and SOIC, and
advanced packaging including 8-lead MSOP, 6-lead
SOT-23, 8-lead 2x3 DFN and 8-lead TSSOP. Pb-free
(Pure Matte Sn) finish is available.
• ORG pin to select word size for ‘86C’ version
• 2048 x 8-bit organization ‘A’ devices (no ORG)
• 1024 x 16-bit organization ‘B’ devices (no ORG)
• Program Enable pin to write-protect the entire
array (‘86C’ version only)
• Self-timed erase/write cycles (including
auto-erase)
• Automatic ERAL before WRAL
• Power-on/off data protection circuitry
• Industry standard 3-wire serial I/O
• Device Status signal (Ready/Busy)
• Sequential read function
• 1,000,000 E/W cycles
• Data retention > 200 years
• Temperature ranges supported:
Package Types (not to scale)
- Industrial (I)
-40°C to +85°C
PDIP/SOIC
(P, SN)
SOT-23
(OT)
- Automotive (E) -40°C to +125°C
Pin Function Table
CS
CLK
DI
1
2
3
4
8
7
6
5
VCC
PE
1
6
5
4
DO
V
CC
Name
CS
Function
2
3
VSS
CS
ORG
DI
Chip Select
CLK
DO
VSS
CLK
DI
Serial Data Clock
Serial Data Input
Serial Data Output
Ground
TSSOP/MSOP
(ST, MS)
DFN
(MC)
DO
1
VCC
CS
8
1
2
3
4
8
CS
CLK
DI
V
CC
VSS
PE
7 PE
2
3
4
CLK
DI
DO
7
6
5
PE
ORG
Program Enable
Memory Configuration
Power Supply
ORG
6
5
VSS
ORG
VCC
DO
VSS
© 2005 Microchip Technology Inc.
DS21797G-page 1
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
1.0
ELECTRICAL CHARACTERISTICS
(†)
Absolute Maximum Ratings
VCC.............................................................................................................................................................................7.0V
All inputs and outputs w.r.t. VSS ......................................................................................................... -0.6V to VCC +1.0V
Storage temperature ...............................................................................................................................-65°C to +150°C
Ambient temperature with power applied................................................................................................-40°C to +125°C
ESD protection on all pins ......................................................................................................................................................≥ 4 kV
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.
TABLE 1-1:
DC CHARACTERISTICS
All parameters apply over the specified
ranges unless otherwise noted.
Industrial (I):
TA = -40°C to +85°C, VCC = +1.8V to 5.5V
Automotive (E): TA = -40°C to +125°C, VCC = +2.5V to 5.5V
Param.
No.
Symbol
Parameter
Min
Typ
Max
Units
Conditions
D1
VIH1
VIH2
High-level input voltage
2.0
0.7 VCC
—
—
VCC +1
VCC +1
V
V
VCC ≥ 2.7V
VCC < 2.7V
D2
D3
D4
VIL1
VIL2
Low-level input voltage
Low-level output voltage
High-level output voltage
-0.3
-0.3
—
—
0.8
0.2 VCC
V
V
VCC ≥ 2.7V
VCC < 2.7V
VOL1
VOL2
—
—
—
—
0.4
0.2
V
V
IOL = 2.1 mA, VCC = 4.5V
IOL = 100 μA, VCC = 2.5V
VOH1
VOH2
2.4
VCC - 0.2
—
—
—
—
V
V
IOH = -400 μA, VCC = 4.5V
IOH = -100 μA, VCC = 2.5V
D5
D6
D7
ILI
Input leakage current
Output leakage current
—
—
—
—
—
—
±1
±1
7
μA
μA
pF
VIN = VSS or VCC
ILO
VOUT = VSS or VCC
CIN,
COUT
Pin capacitance (all inputs/
outputs)
VIN/VOUT = 0V (Note 1)
TA = 25°C, FCLK = 1 MHz
D8
D9
ICC write Write current
—
—
—
500
3
—
mA
μA
FCLK = 3 MHz, VCC = 5.5V
FCLK = 2 MHz, VCC = 2.5V
ICC read Read current
—
—
—
—
—
100
1
500
—
mA
μA
μA
FCLK = 3 MHz, VCC = 5.5V
FCLK = 2 MHz, VCC = 3.0V
FCLK = 2 MHz, VCC = 2.5V
D10
ICCS
Standby current
—
—
—
—
1
5
μA
μA
I – Temp
E – Temp
CLK = CS = 0V
ORG = DI
PE = VSS or VCC
(Note 2) (Note 3)
D11
VPOR
VCC voltage detect
(Note 1)
—
—
1.5
3.8
—
—
V
V
93AA86A/B/C, 93LC86A/B/C
93C86A/B/C
Note 1: This parameter is periodically sampled and not 100% tested.
2: ORG and PE pin not available on ‘A’ or ‘B’ versions.
3: Ready/Busy status must be cleared from DO, see Section 3.4 “Data Out (DO)”.
DS21797G-page 2
© 2005 Microchip Technology Inc.
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
TABLE 1-2:
AC CHARACTERISTICS
All parameters apply over the specified
ranges unless otherwise noted.
Industrial (I):
TA = -40°C to +85°C, VCC = +1.8V to 5.5V
Automotive (E): TA = -40°C to +125°C, VCC = +2.5V to 5.5V
Param.
No.
Symbol
Parameter
Clock frequency
Min
Max
Units
Conditions
A1
FCLK
—
3
2
1
MHz 4.5V ≤ VCC < 5.5V
MHz 2.5V ≤ VCC < 4.5V
MHz 1.8V ≤ VCC < 2.5V
A2
A3
A4
TCKH
TCKL
TCSS
Clock high time
200
250
450
—
—
—
ns
ns
ns
4.5V ≤ VCC < 5.5V
2.5V ≤ VCC < 4.5V
1.8V ≤ VCC < 2.5V
Clock low time
100
200
450
ns
ns
ns
4.5V ≤ VCC < 5.5V
2.5V ≤ VCC < 4.5V
1.8V ≤ VCC < 2.5V
Chip Select setup time
50
100
250
ns
ns
ns
4.5V ≤ VCC < 5.5V
2.5V ≤ VCC < 4.5V
1.8V ≤ VCC < 2.5V
A5
A6
A7
TCSH
TCSL
TDIS
Chip Select hold time
Chip Select low time
Data input setup time
0
—
—
—
ns
ns
1.8V ≤ VCC < 5.5V
1.8V ≤ VCC < 5.5V
250
50
100
250
ns
ns
ns
4.5V ≤ VCC < 5.5V
2.5V ≤ VCC < 4.5V
1.8V ≤ VCC < 2.5V
A8
A9
TDIH
TPD
Data input hold time
50
100
250
—
ns
ns
ns
4.5V ≤ VCC < 5.5V
2.5V ≤ VCC < 4.5V
1.8V ≤ VCC < 2.5V
4.5V ≤ VCC < 5.5V, CL = 100 pF
2.5V ≤ VCC < 4.5V, CL = 100 pF
1.8V ≤ VCC < 2.5V, CL = 100 pF
Data output delay time
—
100
250
400
ns
ns
ns
A10
A11
TCZ
TSV
Data output disable time
Status valid time
—
—
100
200
ns
ns
4.5V ≤ VCC < 5.5V, (Note 1)
1.8V ≤ VCC < 4.5V, (Note 1)
200
300
500
ns
ns
ns
4.5V ≤ VCC < 5.5V, CL = 100 pF
2.5V ≤ VCC < 4.5V, CL = 100 pF
1.8V ≤ VCC < 2.5V, CL = 100 pF
A12
A13
TWC
TWC
Program cycle time
—
—
5
ms
Erase/Write mode (AA and LC
versions)
2
ms
Erase/Write mode
(93C versions)
A14
A15
A16
TEC
TWL
—
—
—
6
ms
ms
ERAL mode, 4.5V ≤ VCC ≤ 5.5V
WRAL mode, 4.5V ≤ VCC ≤ 5.5V
15
—
Endurance
1M
cycles 25°C, VCC = 5.0V, (Note 2)
Note 1: This parameter is periodically sampled and not 100% tested.
2: This application is not tested but ensured by characterization. For endurance estimates in a specific
application, please consult the Total Endurance™ Model which may be obtained from Microchip’s web site
at www.microchip.com.
© 2005 Microchip Technology Inc.
DS21797G-page 3
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
FIGURE 1-1:
SYNCHRONOUS DATA TIMING
VIH
VIL
VIH
CS
TCSS
TCKH
TCKL
TCSH
CLK
DI
VIL
TDIS
TDIH
VIH
VIL
TCZ
TCZ
TPD
TPD
VOH
DO
(Read)
VOL
VOH
TSV
DO
(Program)
Status Valid
VOL
Note:
TSV is relative to CS.
TABLE 1-3: INSTRUCTION SET FOR X 16 ORGANIZATION (93XX86B OR 93XX86C WITH ORG = 1)
Req. CLK
Cycles
Instruction SB Opcode
Address
Data In
Data Out
READ
EWEN
ERASE
ERAL
WRITE
WRAL
EWDS
1
1
1
1
1
1
1
10
00
11
00
01
00
00
A9 A8 A7 A6 A5 A4 A3 A2 A1 A0
—
—
—
—
D15-D0
HighZ
29
13
13
13
29
29
13
1
1
X
X
X
X
X
X
X
X
A9 A8 A7 A6 A5 A4 A3 A2 A1 A0
(RDY/BSY)
(RDY/BSY)
1
0
X
X
X
X
X
X
X
X
A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 D15-D0 (RDY/BSY)
0
0
1
0
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D15-D0 (RDY/BSY)
High-Z
—
TABLE 1-4: INSTRUCTION SET FOR X 8 ORGANIZATION (93XX86A OR 93XX86C WITH ORG = 0)
Req.CLK
Cycles
Instruction SB Opcode
Address
Data In
Data Out
READ
EWEN
ERASE
ERAL
WRITE
WRAL
EWDS
1
1
1
1
1
1
1
10
00
11
00
01
00
00
A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0
—
—
—
—
D7-D0
High-Z
22
14
14
14
22
22
14
1
1
X
X
X
X
X
X
X
X
X
A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0
(RDY/BSY)
(RDY/BSY)
1
0
X
X
X
X
X
X
X
X
X
A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 D7-D0 (RDY/BSY)
0
0
1
0
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D7-D0 (RDY/BSY)
High-Z
—
DS21797G-page 4
© 2005 Microchip Technology Inc.
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
2.2
Data In/Data Out (DI/DO)
2.0
FUNCTIONAL DESCRIPTION
It is possible to connect the Data In and Data Out pins
together. However, with this configuration it is possible
for a “bus conflict” to occur during the “dummy zero”
that precedes the read operation, if A0 is a logic high
level. Under such a condition the voltage level seen at
Data Out is undefined and will depend upon the relative
impedances of Data Out and the signal source driving
A0. The higher the current sourcing capability of the
driver, the higher the voltage at the Data Out pin. In
order to limit this current, a resistor should be
connected between DI and DO.
When the ORG pin (93XX86C) is connected to VCC,
the (x16) organization is selected. When it is connected
to ground, the (x8) organization is selected. Instruc-
tions, addresses and write data are clocked into the DI
pin on the rising edge of the clock (CLK). The DO pin is
normally held in a High-Z state except when reading
data from the device, or when checking the Ready/
Busy status during a programming operation. The
Ready/Busy status can be verified during an Erase/
Write operation by polling the DO pin; DO low indicates
that programming is still in progress, while DO high
indicates the device is ready. DO will enter the High-Z
state on the falling edge of CS.
2.3
Data Protection
All modes of operation are inhibited when VCC is below
a typical voltage of 1.5V for ‘93AA’ and ‘93LC’ devices
or 3.8V for ‘93C’ devices.
2.1
Start Condition
The Start bit is detected by the device if CS and DI are
both high with respect to the positive edge of CLK for
the first time.
The EWEN and EWDS commands give additional
protection against accidentally programming during
normal operation.
Before a Start condition is detected, CS, CLK and DI
may change in any combination (except to that of a
Start condition), without resulting in any device
operation (Read, Write, Erase, EWEN, EWDS, ERAL
or WRAL). As soon as CS is high, the device is no
longer in Standby mode.
Note:
For added protection, an EWDS
command should be performed after
every write operation and an external 10
kΩ pull-down protection resistor should be
added to the CS pin.
An instruction following a Start condition will only be
executed if the required opcode, address and data bits
for any particular instruction are clocked in.
After power-up the device is automatically in the EWDS
mode. Therefore, an EWEN instruction must be
performed before the initial ERASEor WRITEinstruction
can be executed.
Note:
When preparing to transmit an instruction,
either the CLK or DI signal levels must be
at a logic low as CS is toggled active high.
Note:
To prevent accidental writes to the array in
the 93XX86C devices, set the PE pin to a
logic low.
© 2005 Microchip Technology Inc.
DS21797G-page 5
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
Block Diagram
VCC
VSS
Address
Decoder
Memory
Array
Address
Counter
DO
Output
Buffer
Data Register
DI
Mode
Decode
Logic
ORG*
CS
PE*
Clock
Register
CLK
*ORG and PE inputs are not available on
A/B devices.
DS21797G-page 6
© 2005 Microchip Technology Inc.
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
The DO pin indicates the Ready/Busy status of the
device if CS is brought high after a minimum of 250 ns
2.4
Erase
The ERASEinstruction forces all data bits of the
specified address to the logical ‘1’ state. The rising
edge of CLK before the last address bit initiates the
write cycle.
low (TCSL). DO at logical ‘0’ indicates that programming
is still in progress. DO at logical ‘1’ indicates that the
register at the specified address has been erased and
the device is ready for another instruction.
Note:
After the Erase cycle is complete, issuing
a Start bit and then taking CS low will clear
the Ready/Busy status from DO.
FIGURE 2-1:
ERASE TIMING
TCSL
CS
Check Status
CLK
DI
1
1
1
AN
AN-1 AN-2
A0
•••
TSV
TCZ
High-Z
Busy
Ready
DO
High-Z
TWC
© 2005 Microchip Technology Inc.
DS21797G-page 7
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
The DO pin indicates the Ready/Busy status of the
device, if CS is brought high after a minimum of 250 ns
low (TCSL).
2.5
Erase All (ERAL)
The Erase All (ERAL) instruction will erase the entire
memory array to the logical ‘1’ state. The ERAL cycle
is identical to the erase cycle, except for the different
opcode. The ERAL cycle is completely self-timed. The
rising edge of CLK before the last data bit initiates the
write cycle. Clocking of the CLK pin is not necessary
after the device has entered the ERAL cycle.
Note:
After the ERAL command is complete,
issuing a Start bit and then taking CS low
will clear the Ready/Busy status from DO.
VCC must be ≥ 4.5V for proper operation of ERAL.
FIGURE 2-2:
ERAL TIMING
TCSL
CS
Check Status
CLK
DI
1
0
0
1
0
x
x
•••
TSV
TCZ
High-Z
Busy
Ready
DO
High-Z
TEC
DS21797G-page 8
© 2005 Microchip Technology Inc.
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
Once the EWEN instruction is executed, programming
remains enabled until an EWDSinstruction is executed
or VCC is removed from the device.
2.6
Erase/Write Disable and Enable
(EWDS/EWEN)
The 93XX86A/B/C powers up in the Erase/Write
Disable (EWDS) state. All programming modes must be
preceded by an Erase/Write Enable (EWEN) instruction.
To protect against accidental data disturbance, the
EWDSinstruction can be used to disable all Erase/Write
functions and should follow all programming
operations. Execution of
a READ instruction is
independent of both the EWENand EWDSinstructions.
FIGURE 2-3:
EWDS TIMING
TCSL
CS
CLK
DI
•••
1
0
0
0
0
x
x
FIGURE 2-4:
EWEN TIMING
TCSL
CS
CLK
DI
•••
1
0
0
1
1
x
x
The output data bits will toggle on the rising edge of the
CLK and are stable after the specified time delay (TPD).
Sequential read is possible when CS is held high. The
memory data will automatically cycle to the next register
and output sequentially.
2.7
Read
The READ instruction outputs the serial data of the
addressed memory location on the DO pin. A dummy
zero bit precedes the 8-bit (If ORG pin is low or A-Version
devices) or 16-bit (If ORG pin is high or B-version
devices) output string.
FIGURE 2-5:
READ TIMING
CS
CLK
DI
An
•••
A0
1
1
0
High-Z
DO
0
Dx
D0
Dx
D0
Dx
D0
•••
•••
•••
© 2005 Microchip Technology Inc.
DS21797G-page 9
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
The DO pin indicates the Ready/Busy status of the
2.8
Write
device, if CS is brought high after a minimum of 250 ns
low (TCSL). DO at logical ‘0’ indicates that programming
is still in progress. DO at logical ‘1’ indicates that the
register at the specified address has been written with
the data specified and the device is ready for another
instruction.
The WRITEinstruction is followed by 8 bits (If ORG is
low or A-version devices) or 16 bits (If ORG pin is high
or B-version devices) of data which are written into the
specified address. The self-timed auto-erase and
programming cycle is initiated by the rising edge of CLK
on the last data bit.
Note:
The write sequence requires a logic high
signal on the PE pin prior to the rising
edge of the last data bit.
Note:
After the Write cycle is complete, issuing a
Start bit and then taking CS low will clear
the Ready/Busy status from DO
FIGURE 2-6:
WRITE TIMING
TCSL
CS
CLK
DI
0
1
1
An
A0
Dx
D0
•••
•••
TSV
TCZ
High-Z
Busy
Ready
DO
High-Z
TWC
DS21797G-page 10
© 2005 Microchip Technology Inc.
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
The DO pin indicates the Ready/Busy status of the
device if CS is brought high after a minimum of 250 ns
2.9
Write All (WRAL)
The Write All (WRAL) instruction will write the entire
memory array with the data specified in the command.
The self-timed auto-erase and programming cycle is
initiated by the rising edge of CLK on the last data bit.
Clocking of the CLK pin is not necessary after the
device has entered the WRAL cycle. The WRAL
command does include an automatic ERAL cycle for
the device. Therefore, the WRAL instruction does not
require an ERALinstruction, but the chip must be in the
EWEN status.
low (TCSL).
Note:
The write sequence requires a logic high
signal on the PE pin prior to the rising
edge of the last data bit.
Note:
After the Write All cycle is complete,
issuing a Start bit and then taking CS low
will clear the Ready/Busy status from DO.
VCC must be ≥ 4.5V for proper operation of WRAL.
FIGURE 2-7:
WRAL TIMING
TCSL
CS
CLK
DI
0
0
1
x
1
0
•••
Dx
•••
x
D0
TSV
TCZ
High-Z
Busy Ready
DO
High-Z
TWL
© 2005 Microchip Technology Inc.
DS21797G-page 11
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
3.0
PIN DESCRIPTIONS
TABLE 3-1:
Name
PIN DESCRIPTIONS
SOIC/PDIP/
MSOP/TSSOP/
DFN
SOT-23
Function
CS
CLK
DI
1
2
3
4
5
6
7
8
5
4
Chip Select
Serial Clock
Data In
3
DO
1
Data Out
Ground
VSS
ORG
PE
2
—
—
6
Organization / 93XX86C
Program Enable
VCC
Power Supply
3.1
Chip Select (CS)
3.3
Data In (DI)
A high level selects the device; a low level deselects
the device and forces it into Standby mode. However, a
programming cycle which is already in progress will be
completed, regardless of the Chip Select (CS) input
signal. If CS is brought low during a program cycle, the
device will go into Standby mode as soon as the
programming cycle is completed.
Data In (DI) is used to clock in a Start bit, opcode,
address and data, synchronously with the CLK input.
3.4
Data Out (DO)
Data Out (DO) is used in the Read mode to output data
synchronously with the CLK input (TPD after the
positive edge of CLK).
CS must be low for 250 ns minimum (TCSL) between
consecutive instructions. If CS is low, the internal
control logic is held in a Reset status.
This pin also provides Ready/Busy status information
during erase and write cycles. Ready/Busy status
information is available on the DO pin if CS is brought
high after being low for minimum Chip Select low time
(TCSL), and an erase or write operation has been
initiated.
3.2
Serial Clock (CLK)
The Serial Clock is used to synchronize the communi-
cation between a master device and the 93XX series
device. Opcodes, address and data bits are clocked in
on the positive edge of CLK. Data bits are also clocked
out on the positive edge of CLK.
The Status signal is not available on DO if CS is held
low during the entire erase or write cycle. In this case,
DO is in the High-Z mode. If status is checked after the
erase/write cycle, the data line will be high to indicate
the device is ready.
CLK can be stopped anywhere in the transmission
sequence (at high or low level) and can be continued
anytime with respect to clock high time (TCKH) and
clock low time (TCKL). This gives the controlling master
freedom in preparing opcode, address and data.
Note:
After a programming cycle is complete,
issuing a Start bit and then taking CS low
will clear the Ready/Busy status from DO.
CLK is a “don't care” if CS is low (device deselected). If
CS is high, but the Start condition has not been
detected (DI = 0), any number of clock cycles can be
received by the device without changing its status (i.e.,
waiting for a Start condition).
3.5
Organization (ORG)
When the ORG pin is connected to VCC or Logic HI, the
(x16) memory organization is selected. When the ORG
pin is tied to VSS or Logic LO, the (x8) memory
organization is selected. For proper operation, ORG
must be tied to a valid logic level.
CLK cycles are not required during the self-timed write
(i.e., auto erase/write) cycle.
93XX86A devices are always x8 organization and
93XX86B devices are always x16 organization.
After detection of a Start condition the specified number
of clock cycles (respectively low-to-high transitions of
CLK) must be provided. These clock cycles are
required to clock in all required opcode, address and
data bits before an instruction is executed. CLK and DI
then become “don't care” inputs waiting for a new Start
condition to be detected.
DS21797G-page 12
© 2005 Microchip Technology Inc.
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
3.6
Program Enable (PE)
This pin allows the user to enable or disable the ability
to write data to the memory array. If the PE pin is tied
to VCC, the device can be programmed. If the PE pin is
tied to VSS, programming will be inhibited. This pin
cannot be floated, it must be tied to VCC or VSS. PE is
not available on 93XX86A or 93XX86B. On those
devices, programming is always enabled.
© 2005 Microchip Technology Inc.
DS21797G-page 13
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
4.0
4.1
PACKAGING INFORMATION
Package Marking Information
8-Lead MSOP (150 mil)
Example:
3L86CI
5281L7
XXXXXXT
YWWNNN
Example:
5EL7
6-Lead SOT-23
XXNN
SOT23 Marking Codes
Device
I-temp
E-temp
93AA86A
93AA86B
93LC86A
93LC86B
93C86A
5BNN
5LNN
5ENN
5PNN
5HNN
5TNN
–
–
5FNN
5RNN
5JNN
5UNN
Example:
93LC86C
8-Lead PDIP
93C86B
Pb-free topside mark is same; Pb-free
noted only on carton label.
XXXXXXXX
T/XXXNNN
I/P
1L7
e
3
0528
YYWW
Example:
93LC86CI
8-Lead SOIC
XXXXXXXT
SN
e
3
0528
XXXXYYWW
1L7
NNN
Example:
8-Lead TSSOP
L86C
I528
1L7
XXXX
TYWW
NNN
Example:
8-Lead 2x3 DFN
XXX
YWW
NN
3E4
528
L7
DS21797G-page 14
© 2005 Microchip Technology Inc.
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
1st Line Marking Codes
Part Number
DFN
TSSOP
MSOP
I Temp.
E Temp.
93AA86C
93LC86C
93C86C
Note:
A86C
3A86CT
3L86CT
3C86CT
3E1
3E4
3E7
—
L86C
C86C
3E5
3E8
T = Temperature grade (I, E)
Legend: XX...X Part number or part number code
T
Temperature (I, E)
Y
Year code (last digit of calendar year)
YY
WW
NNN
Year code (last 2 digits of calendar year)
Week code (week of January 1 is week ‘01’)
Alphanumeric traceability code (2 characters for small packages)
Pb-free JEDEC designator for Matte Tin (Sn)
e
3
Note: For very small packages with no room for the Pb-free JEDEC designator
, the marking will only appear on the outer carton or reel label.
e
3
Note: In the event the full Microchip part number cannot be marked on one line, it will
be carried over to the next line, thus limiting the number of available
characters for customer-specific information.
Note:
Please visit www.microchip.com/Pbfree for the latest information on Pb-free conversion.
*Standard OTP marking consists of Microchip part number, year code, week code, and traceability code.
© 2005 Microchip Technology Inc.
DS21797G-page 15
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
8-Lead Plastic Micro Small Outline Package (MS) (MSOP)
E
E1
p
D
2
B
n
1
α
A2
A
c
φ
A1
(F)
L
β
Units
Dimension Limits
INCHES
NOM
MILLIMETERS*
MIN
MAX
MIN
NOM
8
MAX
n
p
Number of Pins
Pitch
8
.026 BSC
0.65 BSC
Overall Height
A
A2
A1
E
-
-
.043
-
-
0.85
-
1.10
Molded Package Thickness
Standoff
.030
.033
.037
0.75
0.95
0.15
.000
-
.006
0.00
Overall Width
.193 TYP.
4.90 BSC
Molded Package Width
Overall Length
Foot Length
E1
D
.118 BSC
.118 BSC
3.00 BSC
3.00 BSC
L
.016
.024
.037 REF
.031
0.40
0.60
0.95 REF
0.80
Footprint (Reference)
Foot Angle
F
φ
c
0°
.003
.009
5°
-
8°
.009
.016
15°
0°
0.08
0.22
5°
-
-
-
-
-
8°
0.23
0.40
15°
Lead Thickness
Lead Width
.006
B
α
β
.012
Mold Draft Angle Top
Mold Draft Angle Bottom
*Controlling Parameter
Notes:
-
-
5°
15°
5°
15°
Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not
exceed .010" (0.254mm) per side.
JEDEC Equivalent: MO-187
Drawing No. C04-111
DS21797G-page 16
© 2005 Microchip Technology Inc.
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
6-Lead Plastic Small Outline Transistor (OT) (SOT-23)
E
E1
B
p1
D
n
1
α
c
A
A2
φ
A1
L
β
Units
INCHES*
NOM
MILLIMETERS
Dimension Limits
MIN
MAX
MIN
NOM
6
MAX
n
p
Number of Pins
Pitch
6
.038
.075
.046
.043
.003
.110
.064
.116
.018
5
0.95
1.90
p1
Outside lead pitch (basic)
Overall Height
A
A2
A1
E
.035
.057
0.90
0.90
1.18
1.10
0.08
2.80
1.63
2.95
0.45
5
1.45
1.30
0.15
3.00
1.75
3.10
0.55
10
Molded Package Thickness
Standoff
.035
.000
.102
.059
.110
.014
0
.051
.006
.118
.069
.122
.022
10
0.00
2.60
1.50
2.80
0.35
0
Overall Width
Molded Package Width
Overall Length
Foot Length
E1
D
L
φ
Foot Angle
c
Lead Thickness
Lead Width
.004
.014
0
.006
.017
5
.008
.020
10
0.09
0.35
0
0.15
0.43
5
0.20
0.50
10
B
α
β
Mold Draft Angle Top
Mold Draft Angle Bottom
*Controlling Parameter
Notes:
0
5
10
0
5
10
Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not
exceed .005" (0.127mm) per side.
JEITA (formerly EIAJ) equivalent: SC-74A
Drawing No. C04-120
© 2005 Microchip Technology Inc.
DS21797G-page 17
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
8-Lead Plastic Dual In-line (P) – 300 mil (PDIP)
E1
D
2
n
1
α
E
A2
A
L
c
A1
β
B1
B
p
eB
Units
INCHES*
NOM
MILLIMETERS
Dimension Limits
MIN
MAX
MIN
NOM
8
MAX
n
p
Number of Pins
Pitch
8
.100
.155
.130
2.54
Top to Seating Plane
A
.140
.170
3.56
2.92
3.94
3.30
4.32
Molded Package Thickness
Base to Seating Plane
Shoulder to Shoulder Width
Molded Package Width
Overall Length
A2
A1
E
.115
.015
.300
.240
.360
.125
.008
.045
.014
.310
5
.145
3.68
0.38
7.62
6.10
9.14
3.18
0.20
1.14
0.36
7.87
5
.313
.250
.373
.130
.012
.058
.018
.370
10
.325
.260
.385
.135
.015
.070
.022
.430
15
7.94
6.35
9.46
3.30
0.29
1.46
0.46
9.40
10
8.26
6.60
9.78
3.43
0.38
1.78
0.56
10.92
15
E1
D
Tip to Seating Plane
Lead Thickness
L
c
Upper Lead Width
B1
B
Lower Lead Width
Overall Row Spacing
Mold Draft Angle Top
Mold Draft Angle Bottom
§
eB
α
β
5
10
15
5
10
15
* Controlling Parameter
§ Significant Characteristic
Notes:
Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed
.010” (0.254mm) per side.
JEDEC Equivalent: MS-001
Drawing No. C04-018
DS21797G-page 18
© 2005 Microchip Technology Inc.
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
8-Lead Plastic Small Outline (SN) – Narrow, 150 mil (SOIC)
E
E1
p
D
2
B
n
1
h
α
45°
c
A2
A
φ
β
L
A1
Units
INCHES*
NOM
MILLIMETERS
Dimension Limits
MIN
MAX
MIN
NOM
8
MAX
n
p
Number of Pins
Pitch
8
.050
.061
.056
.007
.237
.154
.193
.015
.025
4
1.27
Overall Height
A
.053
.069
1.35
1.32
1.55
1.42
0.18
6.02
3.91
4.90
0.38
0.62
4
1.75
Molded Package Thickness
Standoff
A2
A1
E
.052
.004
.228
.146
.189
.010
.019
0
.061
.010
.244
.157
.197
.020
.030
8
1.55
0.25
6.20
3.99
5.00
0.51
0.76
8
§
0.10
5.79
3.71
4.80
0.25
0.48
0
Overall Width
Molded Package Width
Overall Length
E1
D
Chamfer Distance
Foot Length
h
L
φ
Foot Angle
c
Lead Thickness
Lead Width
.008
.013
0
.009
.017
12
.010
.020
15
0.20
0.33
0
0.23
0.42
12
0.25
0.51
15
B
α
β
Mold Draft Angle Top
Mold Draft Angle Bottom
0
12
15
0
12
15
* Controlling Parameter
§ Significant Characteristic
Notes:
Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed
.010” (0.254mm) per side.
JEDEC Equivalent: MS-012
Drawing No. C04-057
© 2005 Microchip Technology Inc.
DS21797G-page 19
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
8-Lead Plastic Thin Shrink Small Outline (ST) – 4.4 mm (TSSOP)
E
E1
p
D
2
1
n
B
α
A
c
A1
A2
φ
β
L
Units
INCHES
NOM
MILLIMETERS*
Dimension Limits
MIN
MAX
MIN
NOM
8
MAX
n
p
Number of Pins
Pitch
8
.026
0.65
Overall Height
A
.043
1.10
Molded Package Thickness
Standoff
A2
A1
E
.033
.035
.004
.251
.173
.118
.024
4
.037
.006
.256
.177
.122
.028
8
0.85
0.05
0.90
0.10
6.38
4.40
3.00
0.60
4
0.95
0.15
6.50
4.50
3.10
0.70
8
§
.002
.246
.169
.114
.020
0
Overall Width
6.25
4.30
2.90
0.50
0
Molded Package Width
Molded Package Length
Foot Length
E1
D
L
φ
Foot Angle
c
Lead Thickness
.004
.007
0
.006
.010
5
.008
.012
10
0.09
0.19
0
0.15
0.25
5
0.20
0.30
10
Lead Width
B
α
β
Mold Draft Angle Top
Mold Draft Angle Bottom
0
5
10
0
5
10
* Controlling Parameter
§ Significant Characteristic
Notes:
Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed
.005” (0.127mm) per side.
JEDEC Equivalent: MO-153
Drawing No. C04-086
DS21797G-page 20
© 2005 Microchip Technology Inc.
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
8-Lead Plastic Dual Flat No Lead Package (MC) 2x3x0.9 mm Body (DFN) – Saw Singulated
D
b
p
n
L
K
E
E2
EXPOSED
METAL
PAD
(NOTE 2)
2
1
PIN 1
ID INDEX
AREA
DETAIL
D2
ALTERNATE
CONTACT
(
NOTE 1)
BOTTOM VIEW
CONFIGURATION
TOP VIEW
EXPOSED
TIE BAR
NOTE 3
A
A1
(
)
A3
Units
Dimension Limits
INCHES
NOM
MILLIMETERS*
MIN
MAX
MIN
NOM
MAX
n
e
Number of Pins
Pitch
8
8
0.50 BSC
0.90
.020 BSC
Overall Height
Standoff
A
A1
A3
D
.031
.000
.035
.001
.008 REF.
.039
0.80
1.00
.002
0.00
0.02
0.05
Contact Thickness
Overall Length
Overall Width
0.20 REF.
2.00 BSC
3.00 BSC
–
.079 BSC
.118 BSC
E
Exposed Pad Length
Exposed Pad Width
Contact Length §
D2
E2
L
.051
.059
.012
.008
.008
–
–
.069
.075
.020
1.30**
1.50**
0.30
1.75
1.90
0.50
–
.016
0.40
Contact-to-Exposed Pad
Contact Width
§
K
–
–
0.20
–
–
b
.010
.012
0.20
0.25
0.30
*
Controlling Parameter
** Not within JEDEC parameters
Significant Characteristic
Notes:
§
1. Pin 1 visual index feature may vary, but must be located within the hatched area.
2. Exposed pad may vary according to die attach paddle size.
3. Package may have one or more exposed tie bars at ends.
BSC: Basic Dimension. Theoretically exact value shown without tolerances.
See ASME Y14.5M
REF: Reference Dimension, usually without tolerance, for information purposes only.
See ASME Y14.5M
JEDEC Equivalent MO-229 VCED-2
Revised 09-12-05
DWG No. C04-123
© 2005 Microchip Technology Inc.
DS21797G-page 21
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
APPENDIX A: REVISION HISTORY
Revision C
Corrections to Section 1.0, Electrical Characteristics.
Section 4.1, 6-Lead SOT-23 package to OT.
Revision D
Corrections to Device Selection Table, Table 1-1, Table
1-2, Section 2.4, Section 2.5, Section 2.8 and Section
2.9. Added note to Figure 2-7.
Revision E
Added DFN package.
Revision F
Added notes throughout.
Revision G
Revised note in Sections 2.8 and 2.9.
Replaced DFN package drawing.
DS21797G-page 22
© 2005 Microchip Technology Inc.
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
THE MICROCHIP WEB SITE
CUSTOMER SUPPORT
Microchip provides online support via our WWW site at
www.microchip.com. This web site is used as a means
to make files and information easily available to
customers. Accessible by using your favorite Internet
browser, the web site contains the following
information:
Users of Microchip products can receive assistance
through several channels:
• Distributor or Representative
• Local Sales Office
• Field Application Engineer (FAE)
• Technical Support
• Product Support – Data sheets and errata,
application notes and sample programs, design
resources, user’s guides and hardware support
documents, latest software releases and archived
software
• Development Systems Information Line
Customers
should
contact
their
distributor,
representative or field application engineer (FAE) for
support. Local sales offices are also available to help
customers. A listing of sales offices and locations is
included in the back of this document.
• General Technical Support – Frequently Asked
Questions (FAQ), technical support requests,
online discussion groups, Microchip consultant
program member listing
Technical support is available through the web site
at: http://support.microchip.com
• Business of Microchip – Product selector and
ordering guides, latest Microchip press releases,
listing of seminars and events, listings of
Microchip sales offices, distributors and factory
representatives
CUSTOMER CHANGE NOTIFICATION
SERVICE
Microchip’s customer notification service helps keep
customers current on Microchip products. Subscribers
will receive e-mail notification whenever there are
changes, updates, revisions or errata related to a
specified product family or development tool of interest.
To register, access the Microchip web site at
www.microchip.com, click on Customer Change
Notification and follow the registration instructions.
© 2005 Microchip Technology Inc.
DS21797G-page 23
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
READER RESPONSE
It is our intention to provide you with the best documentation possible to ensure successful use of your Microchip prod-
uct. If you wish to provide your comments on organization, clarity, subject matter, and ways in which our documentation
can better serve you, please FAX your comments to the Technical Publications Manager at (480) 792-4150.
Please list the following information, and use this outline to provide us with your comments about this document.
To:
Technical Publications Manager
Reader Response
Total Pages Sent ________
RE:
From:
Name
Company
Address
City / State / ZIP / Country
Telephone: (_______) _________ - _________
FAX: (______) _________ - _________
Application (optional):
Would you like a reply?
Y
N
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
DS21797G
Literature Number:
Device:
Questions:
1. What are the best features of this document?
2. How does this document meet your hardware and software development needs?
3. Do you find the organization of this document easy to follow? If not, why?
4. What additions to the document do you think would enhance the structure and subject?
5. What deletions from the document could be made without affecting the overall usefulness?
6. Is there any incorrect or misleading information (what and where)?
7. How would you improve this document?
DS21797G-page 24
© 2005 Microchip Technology Inc.
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.
/XX
X
PART NO.
Device
X
X
Examples:
a)
93AA86C-I/MS: 16K, 2048x8 or 1024x16
Package
Lead Finish
Tape & Reel Temperature
Range
Serial EEPROM, MSOP package, 1.8V
93AA86AT-I/OT: 16K, 2048x8 Serial EEPROM,
SOT-23 package, tape and reel, 1.8V
b)
Device:
93AA86A: 16K 1.8V Microwire Serial EEPROM (x8)
93AA86B: 16K 1.8V Microwire Serial EEPROM (x16)
93AA86C: 16K 1.8V Microwire Serial EEPROM w/ORG
c)
93AA86CT-I/MS: 16K, 2048x8 or 1024x16
Serial EEPROM, MSOP package, tape and
reel, 1.8V
93LC86A: 16K 2.5V Microwire Serial EEPROM (x8)
93LC86B: 16K 2.5V Microwire Serial EEPROM (x16)
93LC86C: 16K 2.5V Microwire Serial EEPROM w/ORG
a)
b)
93LC86C-I/MS: 16K, 2048x8, 1024x16 Serial
EEPROM, MSOP package, 2.5V
93LC86BT-I/OT:
16K,
1024x16
Serial
93C86A: 16K 5.0V Microwire Serial EEPROM (x8)
93C86B: 16K 5.0V Microwire Serial EEPROM (x16)
93C86C: 16K 5.0V Microwire Serial EEPROM w/ORG
EEPROM, SOT-23 package, tape and reel,
2.5V
a)
b)
93C86C-I/MS: 16K, 2048x8 or 1024x16 Serial
EEPROM, MSOP package, 5.0V
93C86AT-I/OT: 16K, 2048x8 Serial EEPROM,
SOT-23 package, tape and reel, 5.0V
Tape & Reel:
Blank
T
=
=
Standard packaging
Tape & Reel
Temperature Range:
Package:
I
E
=
=
-40°C to +85°C
-40°C to +125°C
MS
OT
P
SN
ST
MC
=
=
=
=
=
=
Plastic MSOP (Micro Small outline, 8-lead)
SOT-23, 6-lead (Tape & Reel only)
Plastic DIP (300 mil body), 8-lead
Plastic SOIC (150 mil body), 8-lead
TSSOP, 8-lead
2x3 DFN, 8-lead
Lead Finish:
Blank
G
=
=
Pb-free - Matte Tin (see Note 1)
Pb-free - Matte Tin only
Note 1: Most products manufactured after January 2005 will have a Matte Tin (Pb-free) finish. Most products manufactured
before January 2005 will have a finish of approximately 63% Sn and 37% Pb (Sn/Pb).
Please visit www.microchip.com for the latest information on Pb-free conversion, including conversion date codes.
Sales and Support
Data Sheets
Products supported by a preliminary Data Sheet may have an errata sheet describing minor operational differences
and recommended workarounds. To determine if an errata sheet exists for a particular device, please contact one of
the following:
1. Your local Microchip sales office
2. The Microchip Corporate Literature Center U.S. FAX: (480) 792-7277
3. The Microchip Worldwide Site (www.microchip.com)
Please specify which device, revision of silicon and Data Sheet (include Literature #) you are using.
New Customer Notification System
Register on our web site (www.microchip.com/cn) to receive the most current information on our products.
© 2005 Microchip Technology Inc.
DS21797G-page 25
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
NOTES:
DS21797G-page 26
© 2005 Microchip Technology Inc.
Note the following details of the code protection feature on Microchip devices:
•
Microchip products meet the specification contained in their particular Microchip Data Sheet.
•
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
•
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
•
•
Microchip is willing to work with the customer who is concerned about the integrity of their code.
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR WAR-
RANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED,
WRITTEN OR ORAL, STATUTORY OR OTHERWISE,
RELATED TO THE INFORMATION, INCLUDING BUT NOT
LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE,
MERCHANTABILITY OR FITNESS FOR PURPOSE.
Microchip disclaims all liability arising from this information and
its use. Use of Microchip’s products as critical components in
life support systems is not authorized except with express
written approval by Microchip. No licenses are conveyed,
implicitly or otherwise, under any Microchip intellectual property
rights.
Trademarks
The Microchip name and logo, the Microchip logo, Accuron,
dsPIC, KEELOQ, microID, MPLAB, PIC, PICmicro, PICSTART,
PRO MATE, PowerSmart, rfPIC, and SmartShunt are
registered trademarks of Microchip Technology Incorporated
in the U.S.A. and other countries.
AmpLab, FilterLab, Migratable Memory, MXDEV, MXLAB,
PICMASTER, SEEVAL, SmartSensor and The Embedded
Control Solutions Company are registered trademarks of
Microchip Technology Incorporated in the U.S.A.
Analog-for-the-Digital Age, Application Maestro, dsPICDEM,
dsPICDEM.net, dsPICworks, ECAN, ECONOMONITOR,
FanSense, FlexROM, fuzzyLAB, In-Circuit Serial
Programming, ICSP, ICEPIC, Linear Active Thermistor,
MPASM, MPLIB, MPLINK, MPSIM, PICkit, PICDEM,
PICDEM.net, PICLAB, PICtail, PowerCal, PowerInfo,
PowerMate, PowerTool, Real ICE, rfLAB, rfPICDEM, Select
Mode, Smart Serial, SmartTel, Total Endurance, UNI/O,
WiperLock and Zena are trademarks of Microchip Technology
Incorporated in the U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
All other trademarks mentioned herein are property of their
respective companies.
© 2005, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
Printed on recycled paper.
Microchip received ISO/TS-16949:2002 quality system certification for
its worldwide headquarters, design and wafer fabrication facilities in
Chandler and Tempe, Arizona and Mountain View, California in
October 2003. The Company’s quality system processes and
procedures are for its PICmicro® 8-bit MCUs, KEELOQ® code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
© 2005 Microchip Technology Inc.
DS21797G-page 27
WORLDWIDE SALES AND SERVICE
AMERICAS
ASIA/PACIFIC
ASIA/PACIFIC
EUROPE
Corporate Office
Australia - Sydney
Tel: 61-2-9868-6733
Fax: 61-2-9868-6755
India - Bangalore
Tel: 91-80-2229-0061
Fax: 91-80-2229-0062
Austria - Wels
Tel: 43-7242-2244-399
Fax: 43-7242-2244-393
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://support.microchip.com
Web Address:
www.microchip.com
China - Beijing
Tel: 86-10-8528-2100
Fax: 86-10-8528-2104
Denmark - Copenhagen
Tel: 45-4450-2828
Fax: 45-4485-2829
India - New Delhi
Tel: 91-11-5160-8631
Fax: 91-11-5160-8632
China - Chengdu
Tel: 86-28-8676-6200
Fax: 86-28-8676-6599
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
India - Pune
Tel: 91-20-2566-1512
Fax: 91-20-2566-1513
Atlanta
China - Fuzhou
Tel: 86-591-8750-3506
Fax: 86-591-8750-3521
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
Japan - Yokohama
Tel: 81-45-471- 6166
Fax: 81-45-471-6122
Alpharetta, GA
Tel: 770-640-0034
Fax: 770-640-0307
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
China - Hong Kong SAR
Tel: 852-2401-1200
Fax: 852-2401-3431
Korea - Gumi
Tel: 82-54-473-4301
Fax: 82-54-473-4302
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
Korea - Seoul
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
China - Shanghai
Tel: 86-21-5407-5533
Fax: 86-21-5407-5066
Malaysia - Penang
Tel: 60-4-646-8870
Fax: 60-4-646-5086
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
UK - Wokingham
Tel: 44-118-921-5869
Fax: 44-118-921-5820
China - Shenyang
Tel: 86-24-2334-2829
Fax: 86-24-2334-2393
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
Detroit
China - Shenzhen
Farmington Hills, MI
Tel: 248-538-2250
Fax: 248-538-2260
Tel: 86-755-8203-2660
Fax: 86-755-8203-1760
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
China - Shunde
Tel: 86-757-2839-5507
Fax: 86-757-2839-5571
Kokomo
Kokomo, IN
Tel: 765-864-8360
Fax: 765-864-8387
Taiwan - Hsin Chu
Tel: 886-3-572-9526
Fax: 886-3-572-6459
China - Wuhan
Tel: 86-27-5980-5300
Fax: 86-27-5980-5118
Taiwan - Kaohsiung
Tel: 886-7-536-4818
Fax: 886-7-536-4803
Los Angeles
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
China - Xian
Tel: 86-29-8833-7250
Fax: 86-29-8833-7256
Taiwan - Taipei
Tel: 886-2-2500-6610
Fax: 886-2-2508-0102
San Jose
Mountain View, CA
Tel: 650-215-1444
Fax: 650-961-0286
Thailand - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
Toronto
Mississauga, Ontario,
Canada
Tel: 905-673-0699
Fax: 905-673-6509
10/31/05
DS21797G-page 28
© 2005 Microchip Technology Inc.
相关型号:
93C86CT-E/SNG
1K X 16 MICROWIRE BUS SERIAL EEPROM, PDSO8, 3.90 MM, ROHS COMPLIANT, PLASTIC, SOIC-8
MICROCHIP
©2020 ICPDF网 联系我们和版权申明