ATF22V10C-10JU-T [MICROCHIP]
Flash PLD, 10ns, CMOS, PQCC28;
| 型号： | ATF22V10C-10JU-T |
| 厂家： | 
MICROCHIP |
| 描述： | Flash PLD, 10ns, CMOS, PQCC28 时钟 输入元件 可编程逻辑 |
| 文件： | 总22页 (文件大小：1911K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Features
• Industry-standard Architecture
– Low-cost, Easy-to-use Software Tools
• High-speed, Electrically Erasable Programmable Logic Devices
– 5ns Maximum Pin-to-pin Delay
• Latch Feature Holds Inputs to Previous Logic States
• Pin-controlled Standby Power (10µA Typical)
• Advanced Flash Technology
– Reprogrammable
High-performance
Electrically
Erasable
Programmable
Logic Device
– 100% Tested
• High-reliability CMOS Process
– 20-year Data Retention
– 100 Erase/Write Cycles
– 2,000V ESD Protection
– 200mA Latch-up Immunity
• Dual Inline and Surface Mount Packages in Standard Pinouts
• PCI-compliant
• Green Package Options (Pb/Halide-free/RoHS Compliant) Available
• Full Military, Commercial and Industrial Temperature Ranges
• Backward-Compatible with Atmel ATF22V10B(Q) and Atmel AT22V10(L)
• Applications Include Glue Logic for 5.0V Systems, DMA Control, State Machine
Control, Graphics Processing
Atmel ATF22V10C
Atmel ATF22V10CQ
1.
Description
See separate datasheet for
the Atmel ATF22V10C(Q)Z
The Atmel® ATF22V10C is a high-performance CMOS (electrically erasable) pro-
grammable logic device (PLD) that utilizes proven electrically erasable Flash memory
technology from Atmel. Speeds down to 5ns and power dissipation as low as 10µA
(typical) are offered. All speed ranges are specified over the full 5V 10% range for
military and industrial temperature ranges, and 5V 5% for commercial temperature
ranges.
Several low-power options allow selection of the best solution for various types of
power-limited applications. Each of these options significantly reduces total system
power and enhances system reliability.
0735U–PLD–7/10
Figure 1-1. Logic Diagram
2.
Pin Configurations
Table 2-1.
Pin Configurations (All Pinouts Top View)
Pin Name
CLK
IN
Function
Clock
Logic Inputs
Bi-directional Buffers
Ground
I/O
GND
VCC
PD
+5V Supply
Power-down
Figure 2-1. TSSOP
Figure 2-2. DIP/SOIC
CLK/IN
IN
1
2
3
4
5
6
7
8
9
24 VCC
23 I/O
22 I/O
21 I/O
20 I/O
19 I/O
18 I/O
17 I/O
16 I/O
15 I/O
14 I/O
13 IN
CLK/IN
IN
1
24
23
22
21
20
19
18
17
16
15
14
13
VCC
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
IN
2
IN
IN
3
IN/PD
IN
IN/PD
IN
4
5
IN
IN
6
IN
IN
7
IN
IN
8
IN
IN
9
IN 10
IN 11
IN
10
11
12
IN
GND 12
GND
Figure 2-3. PLCC/LCC
IN/PD
IN
5
6
7
8
9
25 I/O
24 I/O
23 I/O
22 GND*
21 I/O
20 I/O
19 I/O
IN
GND*
IN
IN 10
IN 11
Note:
For all PLCCs (except “-5”), pins 1, 8, 15 and 22 can be left unconnected. However, if they are
connected, superior performance will be achieved
2
Atmel ATF22V10C(Q)
0735U–PLD–7/10
Atmel ATF22V10C(Q)
3.
Absolute Maximum Ratings*
*NOTICE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device.
This is a stress rating only and functional operation of the
device at these or any other conditions beyond those
indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reli-
ability.
Temperature under Bias................. -55°C to +125°C
Storage Temperature...................... -65°C to +150°C
Voltage on Any Pin with
Respect to Ground...........................-2.0V to +7.0V(1)
Voltage on Input Pins
with Respect to Ground
Note:
1. Minimum voltage is -0.6V DC, which may undershoot to -
2.0V for pulses of less than 20ns.
during Programming ......................-2.0V to +14.0V(1)
Maximum output pin voltage is VCC + 0.75V DC, which
may overshoot to 7.0V for pulses of less than 20ns.
Programming Voltage with
Respect to Ground.........................-2.0V to +14.0V(1)
4.
DC and AC Operating Conditions
Commercial
Industrial
-40°C - 85°C
5V 10%
Military
-55°C - 125°C (case)
5V 10%
Operating Temperature (Ambient)
VCC Power Supply
0°C - 70°C
5V 5%
3
0735U–PLD–7/10
4.1
DC Characteristics
Symbol Parameter
Condition
Min
Typ
Max
Units
Input or I/O Low
Leakage Current
IIL
0 VIN VIL (Max)
-10.0
µA
Input or I/O High
Leakage Current
IIH
3.5 VIN VCC
10.0
µA
C-5, 7, 10
C-10
Com.
Ind.
85.0
90.0
65.0
35.0
130.0
140.0
115.0
70.0
mA
mA
mA
mA
mA
mA
mA
mA
mA
µA
VCC = Max,
VIN = Max,
Outputs Open
Power Supply Current,
Standby
ICC
C-15
Ind.
CQ-15
C-5, 7, 10
C-10
Ind.
Com.
Ind., Mil.
Ind.
150.0
160.0
125
Clocked Power Supply
Current
VCC = Max, Outputs Open,
f = 15MHz
ICC2
C-15
70.0
C-15
Mil.
160.0
80.0
CQ-15
Ind.
40.0
10.0
10.0
VCC = Max
Com.
Ind.
500.0
650.0
Power Supply Current,
PD Mode
IPD
VIN = 0, Max
µA
Output Short Circuit
Current
(1)
IOS
VOUT = 0.5V
-130.0
mA
VIL
VIH
Input Low Voltage
Input High Voltage
-0.5
2.0
0.8
VCC+0.75
0.5
V
V
V
V
I
OL = 16mA
Com., Ind.
Mil.
VIN = VIH or VIL,
CC = Min
VOL
Output Low Voltage
Output High Voltage
V
IOL = 12mA
0.5
VIN = VIH or VIL,
CC = Min
VOH
IOH = -4.0mA
2.4
V
V
Note:
1. Not more than one output at a time should be shorted. Duration of short circuit test should not exceed 30 sec
4.2
AC Waveforms (1)
CLOCK
Note:
1. Timing measurement reference is 1.5V. Input AC driving levels are 0.0V and 3.0V, unless otherwise specified
4
Atmel ATF22V10C(Q)
0735U–PLD–7/10
Atmel ATF22V10C(Q)
4.3
AC Characteristics(1)
-5
-7
-10
-15
Symbol Parameter
Min
1.0
1.0
Max
Min
3.0
2.0
Max
Min
3.0
2.0
Max
Min
3.0
2.0
Max
Units
Input or Feedback to Combinatorial
Output
tPD
5.0
7.5
10.0
15.0
ns
tCO
tCF
tS
Clock to Output
4.0
2.5
4.5(2)
2.5
6.5
2.5
8.0
2.5
ns
ns
Clock to Feedback
Input or Feedback Setup Time
Hold Time
3.0
0
3.5
0
4.5
0
10.0
0
ns
tH
ns
External Feedback 1/(tS + tCO
Internal Feedback 1/(tS + tCF
No Feedback 1/(tWH + tWL
Clock Width (tWL and tWH
Input or I/O to Output Enable
)
142.0
166.0
166.0
3.0
125.0(3)
142.0
166.0
3.0
90.0
117.0
125.0
3.0
55.5
80.0
83.3
6.0
MHz
MHz
MHz
ns
fMAX
)
)
tW
)
tEA
tER
2.0
6.0
5.0
3.0
7.5
7.5
3.0
10.0
9.0
3.0
15.0
15.0
ns
Input or I/O to Output Disable
2.0
3.0
3.0
3.0
ns
Input or I/O to Asynchronous Reset of
Register
tAP
3.0
7.0
3.0
10.0
3.0
12.0
3.0
20.0
ns
tAW
tAR
tSP
Asynchronous Reset Width
5.5
4.0
4.0
7.0
5.0
4.5
8.0
6.0
6.0
15.0
10.0
10.0
ns
ns
ns
Asynchronous Reset Recovery Time
Setup Time, Synchronous Preset
Synchronous Preset to Clock
Recovery Time
tSPR
4.0
5.0
8.0
10.0
ns
Notes: 1. See ordering information for valid part numbers
2. 5.5ns for DIP package devices
3. 111MHz for DIP package devices
5
0735U–PLD–7/10
4.4
Power-down AC Characteristics(1)(2)(3)
-5
-7
-10
-15
Symbol
tIVDH
Parameter
Min
5.0
0
Max
Min
7.5
0
Max
Min
10.0
0
Max
Min
15.0
0
Max
Units
ns
Valid Input before PD High
Valid OE before PD High
Valid Clock before PD High
Input Don’t Care after PD High
OE Don’t Care after PD High
Clock Don’t Care after PD High
PD Low to Valid Input
tGVDH
tCVDH
tDHIX
ns
0
0
0
ns
5.0
5.0
7.0
7.0
10.0
10.0
10.0
10.0
25.0
25.0
30.0
15.0
15.0
15.0
15.0
30.0
30.0
35.0
ns
tDHGX
tDHCX
tDLIV
ns
5.0
7.0
ns
5.0
7.5
ns
tDLGV
tDLCV
tDLOV
PD Low to Valid OE
15.0
15.0
20.0
20.0
20.0
25.0
ns
PD Low to Valid Clock
PD Low to Valid Output
ns
ns
Notes: 1. Output data is latched and held
2. High-Z outputs remain high-Z
3. Clock and input transitions are ignored
4.5
Input Test Waveforms
4.5.1 Input Test Waveforms and Measurement Levels
4.5.2 Commercial Output Test Loads
4.6
Pin Capacitance
Table 4-1.
Pin Capacitance (f = 1MHz, T = 25C(1))
Typ
5
Max
8
Units
pF
Conditions
VIN = 0V
CIN
COUT
6
8
pF
VOUT = 0V
Note:
1. Typical values for nominal supply voltage. This parameter is only sampled and is not 100% tested
6
Atmel ATF22V10C(Q)
0735U–PLD–7/10
Atmel ATF22V10C(Q)
4.7
Power-up Reset
The registers in the Atmel® ATF22V10Cs are designed to reset during power-up. At a point delayed slightly from
CC crossing VRST, all registers will be reset to the low state. The output state will depend on the polarity of the
V
output buffer.
This feature is critical for state machine initialization. However, due to the asynchronous nature of reset and the
uncertainty of how VCC actually rises in the system, the following conditions are required:
1. The VCC rise must be monotonic, and starts below 0.7V
2. After reset occurs, all input and feedback setup times must be met before driving the clock pin high
3. The clock must remain stable during tPR
Figure 4-1. Power-up Reset Timing
V
R
ST
POWER
t
PR
REGISTERED
OUTPUTS
t
S
t
W
CLOCK
4.8
Preload of Registered Outputs
The ATF22V10C registers are provided with circuitry to allow loading of each register with either a high or a low.
This feature will simplify testing since any state can be forced into the registers to control test sequencing. A
JEDEC file with preload is generated when a source file with vectors is compiled. Once downloaded, the JEDEC
file preload sequence will be done automatically by most of the approved programmers after the programming.
5.
6.
Electronic Signature Word
There are 64-bits of programmable memory that are always available to the user, even if the device is secured.
These bits can be used for user-specific data.
Security Fuse Usage
A single fuse is provided to prevent unauthorized copying of the ATF22V10C fuse patterns. Once programmed,
fuse verify and preload are inhibited. However, the 64-bit User Signature remains accessible.
The security fuse should be programmed last, as its effect is immediate.
7.
Programming/Erasing
Programming/erasing is performed using standard PLD programmers. See “CMOS PLD Programming Hardware
and Software Support” for information on software/programming.
Table 7-1.
Programming/Erasing
Parameter
tPR
Description
Typ
600
3.8
Max
1,000
4.5
Units
ns
Power-up Reset Time
Power-up Reset Voltage
VRST
V
7
0735U–PLD–7/10
8.
Input and I/O Pin-keeper Circuits
The Atmel® ATF22V10C contains internal input and I/O pin-keeper circuits. These circuits allow each ATF22V10C
pin to hold its previous value even when it is not being driven by an external source or by the device’s output buffer.
This helps to ensure that all logic array inputs are at known valid logic levels. This reduces system power by
preventing pins from floating to indeterminate levels. By using pin-keeper circuits rather than pull-up resistors,
there is no DC current required to hold the pins in either logic state (high or low).
These pin-keeper circuits are implemented as weak feedback inverters, as shown in the Input Diagram below.
These keeper circuits can easily be overdriven by standard TTL- or CMOS-compatible drivers. The typical
overdrive current required is 40µA.
Figure 8-1. Input Diagram
Figure 8-2. I/O Diagram
8
Atmel ATF22V10C(Q)
0735U–PLD–7/10
Atmel ATF22V10C(Q)
9.
Power-down Mode
The Atmel® ATF22V10C includes an optional pin-controlled power-down feature. When this mode is enabled, the
PD pin acts as the power-down pin (Pin 4 on the DIP/SOIC packages and Pin 5 on the PLCC package). When the
PD pin is high, the device supply current is reduced to less than 100mA. During power-down, all output data and
internal logic states are latched and held. Therefore, all registered and combinatorial output data remain valid. Any
outputs that were in an undetermined state at the onset of power-down will remain at the same state. During
power-down, all input signals except the power-down pin are blocked. Input and I/O hold latches remain active to
ensure that pins do not float to indeterminate levels, further reducing system power. The power-down pin feature is
enabled in the logic design file. Designs using the power-down pin may not use the PD pin logic array input.
However, all other PD pin macrocell resources may still be used, including the buried feedback and foldback
product term array inputs.
PD pin configuration is controlled by the design file, and appears as a separate fuse bit in the JEDEC file. When
the power-down feature is not specified in the design file, the IN/PD pin will be configured as a regular logic input.
Note:
Some programmers list the 22V10 JEDEC compatible 22V10C (no PD used) separately from the non-22V10 JEDEC
compatible 22V10CEX (with PD used)
10. Compiler Mode Selection
Table 10-1. Compiler Mode Selection
PAL Mode
(5828 Fuses)
GAL Mode
(5892 Fuses)
Power-down Mode(1)
(5893 Fuses)
Synario
ATF22V10C (DIP)
ATTF22V10C DIP (UES)
ATF22C10C PLCC (UES)
ATF22V10C DIP (PWD)
ATF22V10C PLCC (PWD)
ATF22V10C (PLCC)
WINCUPL
P22V10
G22V10
G22V10CP
P22V10LCC
G22V10LCC
G22V10CPLCC
Note:
1. These device types will create a JEDEC file which when programmed in Atmel ATF22V10C devices will enable the
power-down mode feature. All other device types have the feature disabled
9
0735U–PLD–7/10
11. Functional Logic Diagram
10
Atmel ATF22V10C(Q)
0735U–PLD–7/10
Atmel ATF22V10C(Q)
ATMEL ATF22V10C/CQSUPPLY CURRENTVS.
SUPPLYVOLTAGE (TA = 25°C)
ATMEL ATF22V10C/CQ
NORMALIZED ICC VS.TEMPERATURE
1.1
1.0
0.9
0.8
140.0
120.0
100.0
80.0
60.0
40.0
20.0
0.0
C-5, -7, -10
C-15
CQ-15
-40.0
0.0
25.0
75.0
4.50
4.75
5.00
5.25
5.50
TEMPERATURE (°C)
SUPPLY VOLTAGE (V)
ATMEL ATF22V10C/CQSUPPLY CURRENTVS.
INPUT FREQUENCY (VCC = 5V,TA = 25°C)
ATMEL ATF22V10C/CQOUTPUT SOURCE
CURRENT VS. OUTPUT VOLTAGE (VCC = 5V,TA =
25°C)
120.0
80.0
40.0
0.0
0.0
-10.0
-20.0
-30.0
-40.0
-50.0
-60.0
-70.0
-80.0
-90.0
C-5, 7, 10
C-15
CQ-15
0.0
10.0
20.0
50.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
FREQUENCY (MHz)
VOH(V)
ATMEL ATF22V10C/CQOUTPUT SOURCE
CURRENTVS.SUPPLYVOLTAGE (VOH = 2.4V)
ATMEL ATF22V10C/CQOUTPUT SINK CURRENTVS.
SUPPLYVOLTAGE (VOL = 0.5V)
0.0
-5.0
140.0
120.0
100.0
80.0
60.0
40.0
20.0
0.0
-10.0
-15.0
-20.0
-25.0
-30.0
-35.0
-40.0
-45.0
-50.0
4.0
4.5
5.0
5.5
6.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
SUPPLY VOLTAGE (V)
SUPPLY VOLTAGE (V)
ATMEL ATF22V10C/CQOUTPUT SINK
CURRENTVS.SUPPLYVOLTAGE (VOL = 0.5V)
ATMEL ATF22V10C/CQINPUT CLAMP CURRENT
VS. INPUTVOLTAGE (VCC = 5V,TA = 35°C)
46.0
45.0
44.0
43.0
42.0
41.0
40.0
39.0
38.0
37.0
0.0
-20.0
-40.0
-60.0
-80.0
-100.0
-120.0
4.0
4.5
5.0
5.5
6.0
0.0
-0.2
-0.4
-0.6
-0.8
-1.0
SUPPLY VOLTAGE (V)
INPUT VOLTAGE (V)
11
0735U–PLD–7/10
ATMEL ATF22V10C/CQ
NORMALIZEDTPD VS.VCC
ATMEL ATF22V10C/CQ
NORMALIZEDTCO VS.TEMPERATURE
1.2
1.1
1.0
0.9
0.8
1.1
1.0
0.9
0.8
4.50
4.75
5.00
5.25
5.50
-40.0
0.0
25.0
75.0
SUPPLY VOLTAGE (V)
TEMPERATURE (°C)
ATMEL ATF22V10C/CQ
NORMALIZEDTCO VS.VCC
ATMEL ATF22V10C/CQ
NORMALIZEDTSU VS.TEMPERATURE
1.3
1.2
1.1
1.0
0.9
0.8
1.1
1.0
0.9
0.8
4.50
4.75
5.00
5.25
5.50
-40.0
0.0
25.0
75.0
SUPPLY VOLTAGE (V)
TEMPERATURE (°C)
ATMEL ATF22V10C/CQ
NORMALIZEDTSU VS.VCC
ATMEL ATF22V10C/CQ
DELTA TPD VS. OUTPUT LOADING
8.0
6.0
4.0
2.0
0.0
-2.0
1.2
1.1
1.0
0.9
0.8
0
50
100
150
200
250
300
4.50
4.75
5.00
5.25
5.50
OUTPUT LOADING (pF)
SUPPLY VOLTAGE (V)
ATMEL ATF22V10C/CQ
NORMALIZEDTPD VS.TEMPERATURE
ATMEL ATF22V10C/CQDELTATPD VS.
NUMBER OF OUTPUT SWITCHING
1.1
1.0
0.9
0.8
0.0
-0.1
-0.2
-0.3
-0.4
-0.5
-40.0
0.0
25.0
75.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
TEMPERATURE (°C)
NUMBER OF OUTPUTS SWITCHING
12
Atmel ATF22V10C(Q)
0735U–PLD–7/10
Atmel ATF22V10C(Q)
ATMEL ATF22V10C/CQ
DELTA TCO VS.OUTPUT LOADING
ATMEL ATF22V10C/CQ
DELTA TCO VS.NUMBER OF SWITCHING
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
0.0
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
50
100
150
200
250
300
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
NUMBER OF OUTPUTS LOADING
NUMBER OF OUTPUTS SWITCHING
13
0735U–PLD–7/10
12. Ordering Information
12.1 Atmel ATF22V10C(Q) Green Package Options (Pb/Halide-free/RoHS Compliant)
tPD (ns)
tS (ns)
tCO (ns)
Ordering Code
Package
Operation Range
Commercial
5
3
4
ATF22V10C-5JX
28J
(0C to 70C)
ATF22V10C-7PX
ATF22V10C-7SX
24P3
24S
Commercial
7.5
7.5
3.5
3.5
4.5
4.5
(0C to 70C)
Industrial
ATF22V10C-7JU
28J
(-40°C to 85C)
ATF22V10C-10JU
ATF22V10C-10PU
ATF22V10C-10SU
ATF22V10C-10XU
28J
24P3
24S
Industrial
10
15
4.5
10
6.5
8
(-40C to 85C)
24X
ATF22V10C-15JU
ATF22V10C-15PU
28J
Industrial
24P3
(-40C to 85C)
Industrial
ATF22V10CQ-15JU
28J
(-40C to 85C)
12.2 Using “C” Product for Industrial
To use commercial product for industrial temperature ranges, down-grade one speed grade from the industrial-
grade to the commercial-grade device (e.g. 7ns PX = 10ns PU) and de-rate power by 30%.
12.3 Military Package Options (Lead-based)(1)
tPD (ns)
tS (ns)
tCO (ns)
Ordering Code
Package
Operation Range
ATF22V10C-10GM/883
ATF22V10C-10NM/883
24D3
28L
Military
10
4.5
6.5
(-55C to 125C)
Class B, Fully Compliant
5962-8984116LA
5962-89841163A
24D3
28L
ATF22V10C-15GM/883
ATF22V10C-15NM/883
24D3
28L
Military
15
10
8
(-55C to 125C)
Class B, Fully Compliant
5962-8984115LA
5962-89841153A
24D3
28L
Notes: 1. Military/DSCC parts meet the DSCC drawing specifications
Package Type
24D3
24P3
24S
24X
28J
24-lead, 0.300" Wide, Non-windowed Ceramic Dual Inline Package (CERDIP)
24-pin, 0.300" Wide, Plastic Dual Inline Package (PDIP)
24-lead, 0.300" Wide, Plastic Gull Wing Small Outline (SOIC)
24-lead, 4.4mm Wide, Plastic Thin Shrink Small Outline (TSSOP)
28-lead, Plastic J-leaded Chip Carrier (PLCC)
28L
28-lead, Ceramic Leadless Chip Carrier (LCC)
14
Atmel ATF22V10C(Q)
0735U–PLD–7/10
Atmel ATF22V10C(Q)
13. Packaging Information
13.1 24D3 – CERDIP
Dimensions in Millimeters and (Inches).
Controlling dimension: Inches.
MIL-STD 1835 D-9 Config A (Glass Sealed)
32.51(1.280)
31.50(1.240)
PIN
1
7.87(0.310)
7.24(0.285)
27.94(1.100) REF
5.08(0.200)
MAX
MIN
0.127(0.005)
1.52(0.060)
0.38(0.015)
0.66(0.026)
0.36(0.014)
SEATING
PLANE
5.08(0.200)
3.18(0.125)
1.65(0.065)
1.14(0.045)
2.45(0.100)BSC
8.13(0.320)
7.37(0.290)
0º~ 15º REF
0.46(0.018)
0.20(0.008)
10.20(0.400) MAX
10/21/03
TITLE
DRAWING NO. REV.
Package Drawing Contact:
packagedrawings@atmel.com
24D3, 24-lead, 0.300" Wide. Non-windowed, Ceramic
Dual Inline Package (Cerdip)
24D3
B
15
0735U–PLD–7/10
13.2 24P3 – PDIP
D
PIN
1
E1
A
SEATING PLANE
A1
L
B
B1
e
E
COMMON DIMENSIONS
(Unit of Measure = mm)
C
MIN
–
MAX
5.334
–
NOM
NOTE
SYMBOL
eC
A
–
–
–
–
–
–
–
–
–
–
–
eB
A1
D
0.381
31.623
7.620
6.096
0.356
1.270
2.921
0.203
–
32.131 Note 2
8.255
E
E1
B
7.112 Note 2
0.559
Notes:
1. This package conforms to JEDEC reference MS-001, Variation AF
2. Dimensions D and E1 do not include mold Flash or Protrusion
Mold Flash or Protrusion shall not exceed 0.25mm (0.010")
B1
L
1.651
3.810
C
0.356
eB
eC
e
10.922
0.000
1.524
2.540 TYP
6/1/04
DRAWING NO. REV.
TITLE
Package Drawing Contact:
packagedrawings@atmel.com
24P3, 24-lead (0.300"/7.62mm Wide) Plastic Dual
Inline Package (PDIP)
24P3
D
16
Atmel ATF22V10C(Q)
0735U–PLD–7/10
Atmel ATF22V10C(Q)
13.3 24S – SOIC
B
D1
D
PIN 1 ID
PIN 1
e
E
A
COMMON DIMENSIONS
(Unit of Measure = mm)
MIN
–
MAX
2.65
0.30
10.65
7.60
15.60
0.51
1.27
0.32
NOM
NOTE
SYMBOL
A
–
A1
A1
D
0.10
10.00
7.40
15.20
0.33
0.40
0.23
–
–
D1
E
–
0
8
–
L1
B
–
L
–
–
L
L1
e
1.27 BSC
06/17/2002
TITLE
DRAWING NO. REV.
24S
Package Drawing Contact:
packagedrawings@atmel.com
24S, 24-lead (0.300" body) Plastic Gull Wing Small
Outline (SOIC)
B
17
0735U–PLD–7/10
13.4 24X – TSSOP
Dimensions in Millimeter and (Inches)*
JEDEC STANDARD MO-153 AD
Controlling dimension: millimeters
0.30(0.012)
0.19(0.007)
4.48(0.176)
4.30(0.169)
6.50(0.256)
6.25(0.246)
PIN 1
0.65(0.0256)BSC
7.90(0.311)
7.70(0.303)
1.20(0.047)MAX
0.15(0.006)
0.05(0.002)
0.20(0.008)
0.09(0.004)
0
8
0.75(0.030)
0.45(0.018)
04/11/2001
TITLE
DRAWING NO. REV.
Package Drawing Contact:
packagedrawings@atmel.com
24X, 24-lead (4.4mm body width) Plastic Thin Shrink
Small Outline Package (TSSOP)
24X
A
18
Atmel ATF22V10C(Q)
0735U–PLD–7/10
Atmel ATF22V10C(Q)
13.5 28J – PLCC
1.14(0.045) X 45°
PIN NO. 1
1.14(0.045) X 45°
0.318(0.0125)
0.191(0.0075)
IDENTIFIER
D2/E2
E1
E
B1
B
e
A2
A1
D1
D
A
0.51(0.020)MAX
45° MAX (3X)
COMMON DIMENSIONS
(Unit of Measure = mm)
MIN
4.191
2.286
0.508
12.319
11.430
12.319
11.430
9.906
0.660
0.330
MAX
4.572
3.048
–
NOM
NOTE
SYMBOL
A
A1
A2
D
–
–
–
–
12.573
D1
E
–
11.582 Note 2
12.573
–
Notes: 1. This package conforms to JEDEC reference MS-018, Variation AB
2. Dimensions D1 and E1 do not include mold protrusion
Allowable protrusion is .010"(0.254mm) per side. Dimension D1
and E1 include mold mismatch and are measured at the extreme
material condition at the upper or lower parting line
E1
D2/E2
B
–
11.582 Note 2
10.922
–
–
–
0.813
3. Lead coplanarity is 0.004" (0.102mm) maximum
B1
e
0.533
1.270 TYP
10/04/01
DRAWING NO. REV.
28J
TITLE
Package Drawing Contact:
packagedrawings@atmel.com
28J, 28-lead, Plastic J-leaded Chip Carrier (PLCC)
B
19
0735U–PLD–7/10
13.6 28L – LCC
Dimensions in Millimeters and (Inches).
Controlling dimension: Inches.
MIL-STD 1835 C-4
11.68(0.460)
11.23(0.442)
2.54(0.100)
2.16(0.085)
11.68(0.460)
11.23(0.442)
1.91(0.075)
1.40(0.055)
PIN 1
1.40(0.055)
1.14(0.045)
INDEX CORNER
2.41(0.095)
1.91(0.075)
0.635(0.025)
X 45°
0.381(0.015)
0.305(0.012)
0.178(0.007)
RADIUS
7.62(0.300) BSC
0.737(0.029)
0.533(0.021)
1.27(0.050) TYP
1.02(0.040) X 45°
2.16(0.085)
1.65(0.065)
7.62(0.300) BSC
10/21/03
TITLE
DRAWING NO. REV.
Package Drawing Contact:
packagedrawings@atmel.com
28L, 28-pad, Non-windowed, Ceramic Lid, Leadless Chip
Carrier (LCC)
28L
B
20
Atmel ATF22V10C(Q)
0735U–PLD–7/10
Atmel ATF22V10C(Q)
14. Revision History
Doc. Rev.
Date
Comments
Updated C-15 military device ICC limit
Revised the maximum power supply current in PD mode for commercial- and industrial-grade
devices from 100µA to 500µA and 100µA to 650µA maximum, respectively
0735U
05/2010
C-15 and CQ-15 Commercial part removed from Table 4-1.
Removed Mil from ICC, C-15 (Ind.) parts
ICC2 at 15mhz Max changed from 90mA to 125mA
0735T
0735S
0735R
05/2009
08/2008
06/2008
Added military-grade packages and removed leaded parts
Added new green part
Updated Green package options
21
0735U–PLD–7/10
Headquarters
International
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131
USA
Tel: (+1) (408) 441-0311
Fax: (+1) (408) 487-2600
www.atmel.com
Atmel Asia Limited
Unit 01-5 & 16, 19F
BEA Tower, Millennium City 5
418 Kwun Tong Road
Kwun Tong, Kowloon
HONG KONG
Atmel Munich GmbH
Business Campus
Parkring 4
D-85748 Garching b. Munich
GERMANY
Atmel Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
JAPAN
Tel: (+81) (3) 3523-3551
Fax: (+81) (3) 3523-7581
Tel: (+49) 89-31970-0
Fax: (+49) 89-3194621
Tel: (+852) 2245-6100
Fax: (+852) 2722-1369
Product Contacts
Technical Support
Sales Contact
Literature Requests
PLD@atmel.com
www.atmel.com/contacts
www.atmel.com/literature
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDI-
TIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY
WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDEN-
TAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF
THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no
representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications
and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided
otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use
as components in applications intended to support or sustain life.
© 2010 Atmel Corporation. All rights reserved.
Atmel®, logo and combinations thereof, and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms
and product names may be trademarks of others.
0735U–PLD–7/10
相关型号：
©2020 ICPDF网 联系我们和版权申明