RMCF0603FT102K [MICROCHIP]

Gigabit Ethernet Switch Evaluation Board;


型号：	RMCF0603FT102K
厂家：	MICROCHIP
描述：	Gigabit Ethernet Switch Evaluation Board
文件：	总36页 (文件大小：2684K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

EVB-KSZ9477

Gigabit Ethernet Switch

Evaluation Board

User’s Guide

 2017 Microchip Technology Inc.

DS50002594A

Note the following details of the code protection feature on Microchip devices:

•

Microchip products meet the specification contained in their particular Microchip Data Sheet.

•

Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the

intended manner and under normal conditions.

•

There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our

knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data

Sheets. Most likely, the person doing so is engaged in theft of intellectual property.

•

Microchip is willing to work with the customer who is concerned about the integrity of their code.

Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not

mean that we are guaranteeing the product as “unbreakable.”

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our

products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts

allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Information contained in this publication regarding device applications and the like is provided only for your convenience and may be

superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO

REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR

OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE,

MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Micro-

chip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold

harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or

otherwise, under any Microchip intellectual property rights unless otherwise stated.

Trademarks

The Microchip name and logo, the Microchip logo, AnyRate, AVR, AVR logo, AVR Freaks, BeaconThings, BitCloud, CryptoMemory, CryptoRF,

dsPIC, FlashFlex, flexPWR, Heldo, JukeBlox, KEELOQ, KEELOQ logo, Kleer, LANCheck, LINK MD, maXStylus, maXTouch, MediaLB, megaAVR,

MOST, MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo, Prochip Designer, QTouch, RightTouch, SAM-BA, SpyNIC,

SST, SST Logo, SuperFlash, tinyAVR, UNI/O, and XMEGA are registered trademarks of Microchip Technology Incorporated in the U.S.A. and

other countries.

ClockWorks, The Embedded Control Solutions Company, EtherSynch, Hyper Speed Control, HyperLight Load, IntelliMOS, mTouch, Precision

Edge, and Quiet-Wire are registered trademarks of Microchip Technology Incorporated in the U.S.A.

Adjacent Key Suppression, AKS, Analog-for-the-Digital Age, Any Capacitor, AnyIn, AnyOut, BodyCom, chipKIT, chipKIT logo, CodeGuard,

CryptoAuthentication, CryptoCompanion, CryptoController, dsPICDEM, dsPICDEM.net, Dynamic Average Matching, DAM, ECAN,

EtherGREEN, In-Circuit Serial Programming, ICSP, Inter-Chip Connectivity, JitterBlocker, KleerNet, KleerNet logo, Mindi, MiWi, motorBench,

MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit,

PICtail, PureSilicon, QMatrix, RightTouch logo, REAL ICE, Ripple Blocker, SAM-ICE, Serial Quad I/O, SMART-I.S., SQI, SuperSwitcher,

SuperSwitcher II, Total Endurance, TSHARC, USBCheck, VariSense, ViewSpan, WiperLock, Wireless DNA, and ZENA are trademarks of

Microchip Technology Incorporated in the U.S.A. and other countries.

SQTP is a service mark of Microchip Technology Incorporated in the U.S.A.

Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries.

GestIC is a registered trademark of Microchip Technology Germany II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in other

countries.

All other trademarks mentioned herein are property of their respective companies.

ISBN: 978-1-5224-1581-7

Microchip received ISO/TS-16949:2009 certification for its worldwide

headquarters, design and wafer fabrication facilities in Chandler and

Tempe, Arizona; Gresham, Oregon and design centers in California

QUALITYꢀMANAGEMENTꢀꢀSYSTEMꢀ

and India. The Company’s quality system processes and procedures

CERTIFIEDꢀBYꢀDNVꢀ

are for its PIC^®MCUs and dsPIC^®DSCs, KEELOQ^®code hopping

devices, Serial EEPROMs, microperipherals, nonvolatile memory and

analog products. In addition, Microchip’s quality system for the design

and manufacture of development systems is ISO 9001:2000 certified.

== ISO/TSꢀ16949ꢀ==ꢀ

DS50002594A-page 2

 2017 Microchip Technology Inc.

Object of Declaration: EVB-KSZ9477

EU Declaration of Conformity

This declaration of conformity is issued by the manufacturer.

The development/evaluation tool is designed to be used for research and development in a laboratory environment. This

development/evaluation tool is not a Finished Appliance, nor is it intended for incorporation into Finished Appliances that are

made commercially available as single functional units to end users under EU EMC Directive 2004/108/EC and as supported by

the European Commission's Guide for the EMC Directive 2004/108/EC (8th February 2010).

This development/evaluation tool complies with EU RoHS2 Directive 2011/65/EU.

This development/evaluation tool, when incorporating wireless and radio-telecom functionality, is in compliance with the

essential requirement and other relevant provisions of the R&TTE Directive 1999/5/EC and the FCC rules as stated in the

declaration of conformity provided in the module datasheet and the module product page available at www.microchip.com.

For information regarding the exclusive, limited warranties applicable to Microchip products, please see Microchip’s standard

terms and conditions of sale, which are printed on our sales documentation and available at www.microchip.com.

Signed for and on behalf of Microchip Technology Inc. at Chandler, Arizona, USA.

 2017 Microchip Technology Inc.

DS50002594A-page 3

EVB-KSZ9477 User’s Guide

NOTES:

DS50002594A-page 4

 2017 Microchip Technology Inc.

EVB-KSZ9477

EVALUATION BOARD

USER’S GUIDE

Table of Contents

Preface ........................................................................................................................... 7

Introduction............................................................................................................ 7

Document Layout .................................................................................................. 7

Conventions Used in this Guide............................................................................ 8

The Microchip Web Site ........................................................................................ 9

Development Systems Customer Change Notification Service ............................ 9

Customer Support ................................................................................................. 9

Document Revision History................................................................................. 10

Chapter 1. Overview

1.1 Introduction ................................................................................................... 11

1.2 References ................................................................................................... 12

1.3 Terms and Abbreviations ............................................................................. 13

Chapter 2. Board Details & Configuration

2.1 Power ........................................................................................................... 15

2.1.1 +5V Power ................................................................................................. 15

2.2 Resets .......................................................................................................... 15

2.2.1 Power-on Reset ......................................................................................... 15

2.3 Clocks ........................................................................................................... 15

2.4 Configuration ................................................................................................ 16

2.4.1 Switch Settings .......................................................................................... 17

2.4.2 Jumper Settings ........................................................................................ 17

2.4.3 SPI and I2C ............................................................................................... 18

2.4.4 LED Status ................................................................................................ 18

2.5 Mechanicals ................................................................................................. 19

Appendix A. EVB-KSZ9477 Evaluation Board

A.1 Introduction .................................................................................................. 21

Appendix B. KSZ9477 Evaluation Board Schematics

B.1 Introduction .................................................................................................. 23

Appendix C. Bill of Materials (BOM)

C.1 Introduction .................................................................................................. 31

Worldwide Sales and Service .................................................................................... 36

 2017 Microchip Technology Inc.

DS50002594A-page 5

EVB-KSZ9477 Evaluation Board User’s Guide

NOTES:

DS50002594A-page 6

 2017 Microchip Technology Inc.

EVB-KSZ9477

EVALUATION BOARD

USER’S GUIDE

Preface

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and

documentation are constantly evolving to meet customer needs, so some actual dialogs

and/or tool descriptions may differ from those in this document. Please refer to our web site

(www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each

page, in front of the page number. The numbering convention for the DS number is

“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the

document.

For the most up-to-date information on development tools, see the MPLAB IDE online help.

Select the Help menu, and then Topics to open a list of available online help files.

INTRODUCTION

This chapter contains general information that will be useful to know before using Atlan-

tis. Items discussed in this chapter include:

• Document Layout

• Conventions Used in this Guide

• The Microchip Web Site

• Development Systems Customer Change Notification Service

• Customer Support

• Document Revision History

DOCUMENT LAYOUT

This document describes how to use the EVB-KSZ9477 as a development tool for the

Microchip KSZ9477 gigabit Ethernet switch. The manual layout is as follows:

• Chapter 1. “Overview” – Shows a brief description of the EVB-KSZ9477.

• Chapter 2. “Board Details & Configuration” – Includes details and instructions

for using the EVB-KSZ9477.

• Appendix A. “EVB-KSZ9477 Evaluation Board” – This appendix shows the

EVB-KSZ9477.

• Appendix B. “KSZ9477 Evaluation Board Schematics” – This appendix shows

the EVB-KSZ9477 schematics.

• Appendix C. “Bill of Materials (BOM)” – This appendix includes the

EVB-KSZ9477 Bill of Materials (BOM).

 2017 Microchip Technology Inc.

DS50002594A-page 7

EVB-KSZ9477 Evaluation Board User’s Guide

CONVENTIONS USED IN THIS GUIDE

This manual uses the following documentation conventions:

DOCUMENTATION CONVENTIONS

Description

Represents

Examples

Arial font:

Italic characters

Referenced books

Emphasized text

A window

MPLAB^®IDE User’s Guide

...is the only compiler...

the Output window

Initial caps

A dialog

the Settings dialog

A menu selection

select Enable Programmer

“Save project before build”

Quotes

A field name in a window or

dialog

Underlined, italic text with

right angle bracket

A menu path

File>Save

Bold characters

A dialog button

A tab

Click OK

Click the Power tab

4‘b0010, 2‘hF1

N‘Rnnnn

A number in verilog format,

where N is the total number of

digits, R is the radix and n is a

digit.

Text in angle brackets < >

Courier New font:

A key on the keyboard

Press <Enter>, <F1>

Plain Courier New

Sample source code

Filenames

#define START

autoexec.bat

c:\mcc18\h

File paths

Keywords

_asm, _endasm, static

-Opa+, -Opa-

0, 1

Command-line options

Bit values

Constants

0xFF, ‘A’

Italic Courier New

Square brackets [ ]

A variable argument

file.o, where file can be

any valid filename

Optional arguments

mcc18 [options] file

[options]

Curly brackets and pipe

character: { | }

Choice of mutually exclusive errorlevel {0|1}

arguments; an OR selection

Ellipses...

Replaces repeated text

var_name [,

var_name...]

Represents code supplied by void main (void)

user

{ ...

}

DS50002594A-page 8

 2017 Microchip Technology Inc.

Preface

THE MICROCHIP WEB SITE

Microchip provides online support via our web site at www.microchip.com. This web

site is used as a means to make files and information easily available to customers.

Accessible by using your favorite Internet browser, the web site contains the following

information:

• Product Support – Data sheets and errata, application notes and sample

programs, design resources, user’s guides and hardware support documents,

latest software releases and archived software

• General Technical Support – Frequently Asked Questions (FAQs), technical

support requests, online discussion groups, Microchip consultant program

member listing

• Business of Microchip – Product selector and ordering guides, latest Microchip

press releases, listing of seminars and events, listings of Microchip sales offices,

distributors and factory representatives

DEVELOPMENT SYSTEMS CUSTOMER CHANGE NOTIFICATION SERVICE

Microchip’s customer notification service helps keep customers current on Microchip

products. Subscribers will receive e-mail notification whenever there are changes,

updates, revisions or errata related to a specified product family or development tool of

interest.

To register, access the Microchip web site at www.microchip.com, click on Customer

Change Notification and follow the registration instructions.

The Development Systems product group categories are:

• Compilers – The latest information on Microchip C compilers, assemblers, linkers

and other language tools. These include all MPLAB C compilers; all MPLAB

assemblers (including MPASM assembler); all MPLAB linkers (including MPLINK

object linker); and all MPLAB librarians (including MPLIB object librarian).

• Emulators – The latest information on Microchip in-circuit emulators.This

includes the MPLAB REAL ICE and MPLAB ICE 2000 in-circuit emulators.

• In-Circuit Debuggers – The latest information on the Microchip in-circuit

debuggers. This includes MPLAB ICD 3 in-circuit debuggers and PICkit 3 debug

express.

• MPLAB IDE – The latest information on Microchip MPLAB IDE, the Windows

Integrated Development Environment for development systems tools. This list is

focused on the MPLAB IDE, MPLAB IDE Project Manager, MPLAB Editor and

MPLAB SIM simulator, as well as general editing and debugging features.

• Programmers – The latest information on Microchip programmers. These include

production programmers such as MPLAB REAL ICE in-circuit emulator, MPLAB

ICD 3 in-circuit debugger and MPLAB PM3 device programmers. Also included

are nonproduction development programmers such as PICSTART Plus and

PIC-kit 2 and 3.

CUSTOMER SUPPORT

Users of Microchip products can receive assistance through several channels:

• Distributor or Representative

• Local Sales Office

• Field Application Engineer (FAE)

• Technical Support

 2017 Microchip Technology Inc.

DS50002594A-page 9

EVB-KSZ9477 Evaluation Board User’s Guide

Customers should contact their distributor, representative or field application engineer

(FAE) for support. Local sales offices are also available to help customers. A listing of

sales offices and locations is included in the back of this document.

Technical support is available through the web site at:

http://www.microchip.com/support

DOCUMENT REVISION HISTORY

Revision A (April 2017)

• Initial Release of this Document.

DS50002594A-page 10

 2017 Microchip Technology Inc.

EVB-KSZ9477

EVALUATION BOARD

USER’S GUIDE

Chapter 1. Overview

1.1

INTRODUCTION

The EVB-KSZ9477 evaluation board features the KSZ9477 seven-port managed giga-

bit Ethernet switch. It has five 10BASE-Te/100BASE-TX/1000BASE-T physical layer

transceivers (PHYs) and associated MAC units, one SGMII and one RGMII interfaces.

Ports 1 through 5, with integrated MAC and PHY are connected to RJ45 Ethernet jacks

with integrated magnetics. The SGMII interface is connected to a small form-factor

pluggable (SFP) transceiver receptacle whereas, the RGMII interface is connected to

the SAMA5D36A embedded microprocessor (MPU).

A user can use the on-board MPU for the customized applications such as IEEE 1588,

audio-video bridging (AVB) and ring redundancy (DLR & HSR). The board also pro-

vides 2Gb (265MB) DDR2 SDRAM and 2Gb (256MB) of NAND flash memory.

The scope of this document is to describe the EVB-KSZ9477 evaluation board setup

and corresponding jumper configurations. A simplified block diagram of the board is

shown in Figure 1-1.

 2017 Microchip Technology Inc.

DS50002594A-page 11

EVB-KSZ9477 Evaluation Board User’s Guide

FIGURE 1-1:

EVB-KSZ9477 BLOCK DIAGRAM

1.2

REFERENCES

Concepts and material available in the following documents will be helpful when read-

ing this document. Visit www.microchip.com for the latest documentation.

• KSZ9477S Data Sheet

• SAMA5D3 Data Sheet

• EVB-KSZ9477 Schematic

• DSC1101 Data Sheet

• ATECC508A Data Sheet

• PL902 Data Sheet

DS50002594A-page 12

 2017 Microchip Technology Inc.

Overview

1.3

TERMS AND ABBREVIATIONS

AVB - Audio-Video Bridging

DLR - Device Level Ring

EVB - Evaluation Board

HSR - High Availability Seamless Redundancy

MII - Media Independent Interface

MIIM - Media Independent Interface Management (also known as MDIO/MDC)

RGMII - Reduced Gigabit Media Independent Interface

SPI - Serial Protocol Interface

PHY - Physical Transceiver

SFP - Small Form-factor Pluggable

SGMII - Serial Gigabit Media Independent Interface

 2017 Microchip Technology Inc.

DS50002594A-page 13

EVB-KSZ9477 Evaluation Board User’s Guide

NOTES:

DS50002594A-page 14

 2017 Microchip Technology Inc.

EVB-KSZ9477

EVALUATION BOARD

USER’S GUIDE

Chapter 2. Board Details & Configuration

This section includes sub-sections on the following EVB-KSZ9477 details:

• Power

• Resets

• Clocks

• Configuration

• Mechanicals

2.1

2.2

2.3

POWER

RESETS

CLOCKS

2.1.1

+5V Power

A 5V/2A power supply should be connected to J8 on the board. The SW4 switch must

be in the ON position to power the board. The F1 fuse is provided on the board for the

over voltage protection.

2.2.1

Power-on Reset

There are two push button switches, SW1 and SW3 available on board. The SW1

switch is a master reset which resets both the MPU and the KSZ9477 Ethernet switch.

SW3 resets only the KSZ9477.

The evaluation board utilizes a crystal oscillator that provides 25 MHz clock to the

KSZ9477 device. The board also features an external clock, DCS1101, which provides

125 MHz 25 ppm clock to the MCU device in the SGMII mode.

 2017 Microchip Technology Inc.

DS50002594A-page 15

EVB-KSZ9477 Evaluation Board User’s Guide

2.4

CONFIGURATION

The following sub-sections describe the various board features and configuration set-

tings. A top view of the EVB-KSZ9477 is shown in Figure 2-1.

FIGURE 2-1:

EVB-KSZ9477 TOP VIEW WITH CALLOUTS

DS50002594A-page 16

 2017 Microchip Technology Inc.

Board Details & Configuration

2.4.1

Switch Settings

SW2 is an eight-position switch which controls many of the KSZ9477 configuration

strap options. The KSZ9477 samples these signals at the rising edge of RESET_N to

determine some internal settings. Following reset, the configuration of these switches

is irrelevant. For initial bring-up, leave most switches in the OFF/OPEN position.

2.4.2

Jumper Settings

Table 2-1, Table 2-2 and Table 2-3 describe jumper settings. The preferred configura-

tion is shown in bold text.

TABLE 2-1:

Jumper

TWO-PIN JUMPERS

Label Description

Open

Closed

P6 100 Mbps KSZ9477 Port 6 configured for RGMII. 1000 Mbps 100 Mbps

This interface is connected to the

SAMA5D36 MPU. KSZ9477 Port 6

RGMII speed configuration strap set-

ting. The setting of this jumper takes

effect only after reset. This setting must

match the speed of the SAMA5D36

RGMII interface.

J15

J13

Security

Enable

Enables security chip, ATECC508A to

be used with the SAMA5D36 MPU if a (Default)

user requires to do so.

Disabled

Enabled

NAND Enable Enables the NAND flash memory.

Disabled

(Default)

TABLE 2-2:

Jumper

THREE-PIN JUMPERS

Label Description

5 VDC

Jumper 1-2

Jumper 2-3

Board power source: 5V barrel

connector or USB

Power from

barrel jack

USB pow-

ered. Not rec-

ommended

due to high

current

requirement.

TABLE 2-3:

Jumper

MULTI-PIN HEADERS

Label

Description

Configuration

J16

KSZ9477 Output

Header

KSZ9477 output probe

points, 4x2 header

Do not install jumpers.

Pin 1: GPIO

Pin 3: GPIO output filtered by

PL902 JitterBlocker.

Pin 5: PME_N output

Pin 7: SYNCLK - 25MHz or

125MHz output reference clock

J21

J10

I/O Connector #2

I/O connector for the

MPU, 6X1 header

No jumpers.

Serial Communica-

tion

Header used for the MPU No jumpers. It is recommended

serial communication,

to use the TTL-232R-3V3 cable

8x1 header

from FTDI.

J18

SPI/I²C Aardvark

KSZ9477 SPI/I²C header An Aardvark SPI/I²C adapter

for external access 5x2

header

can be attached.

 2017 Microchip Technology Inc.

DS50002594A-page 17

EVB-KSZ9477 Evaluation Board User’s Guide

TABLE 2-3:

Jumper

MULTI-PIN HEADERS

Label

Description

Configuration

No jumpers

J11

JTAG

JTAG interface to pro-

gram and debug the

MPU, 10X2 header

J22

I/O Connector #1

LCD connector

GPIO for the MPU

No jumpers

LCD connector for the

MPU

No jumpers. Refer to SAMA5D3

Xplained User Guide for details.

2.4.3

SPI and I²C

The MPU can control the KSZ9477 via the SPI interface or an external device such as,

Totalphase Aardvark. The Table 2-4 below explains the jumper settings.

TABLE 2-4:

Mode

SPI/I C HEADER

J18 (5X2 header)

J19 (4X2 header)

SPI from Atmel MCU

All open

Install all jumpers

All open

SPI from Aardvark or

Cheetah cable

Connect Aardvark or Cheetah cable

SPI from Aardvark

Connect Aardvark

All open

I²C/SPI host adapter or

Cheetah SPI host adapter

Note: Both the adapters are available on MicrochipDirect.com web site to pur-

chase. SPI from Aardvark I2C/SPI (part number TTP100005) or Cheetah

SPI host adapter (part number TTP100004).

2.4.4

LED Status

The table Table 2-5 shows the LED status indication.

TABLE 2-5:

Item

STATUS LEDS

LED Diode

Comments

SFP Signal present

D1 (Green)

D2 (Green)

D4 (Blue)

3.3V Power indication

SPI Active

DS50002594A-page 18

 2017 Microchip Technology Inc.

Board Details & Configuration

2.5

MECHANICALS

FIGURE 2-2:

EVB-KSZ9477 MECHANICAL DIMENSIONS

 2017 Microchip Technology Inc.

DS50002594A-page 19

EVB-KSZ9477 Evaluation Board User’s Guide

NOTES:

DS50002594A-page 20

 2017 Microchip Technology Inc.

EVB-KSZ9477

EVALUATION BOARD

USER’S GUIDE

Appendix A. EVB-KSZ9477 Evaluation Board

A.1 INTRODUCTION

This appendix shows the EVB-KSZ9477 Evaluation Board.

FIGURE A-1: EVB-KSZ9477 EVALUATION BOARD

 2017 Microchip Technology Inc.

DS50002594A-page 21

EVB-KSZ9477 Evaluation Board User’s Guide

NOTES:

DS50002594A-page 22

 2017 Microchip Technology Inc.

EVB-KSZ9477

EVALUATION BOARD

USER’S GUIDE

Appendix B. KSZ9477 Evaluation Board Schematics

B.1 INTRODUCTION

This appendix shows the EVB-KSZ9477 Evaluation Board Schematics.

 2017 Microchip Technology Inc.

DS50002594A-page 23

FIGURE B-1:

EVB-KSZ9477 BOARD POWER I/O AND REGULATORS

5V Select

*1-2

5V Pwr Off/On

5V_MAIN

VBUS

3V3

2V5

SW4

F1 4A FB

R117

5V (typ)

5V_F

2.1 mm

TP8

VIN

VOUT

ADJ

5V_SW

R18

R21

TP9

C27

nSHDN

GND

GND_TAB

R19

R17

22R

C28

2.2k

5V DC Barrel Jack

10k

102k

10uF

C29

0.1uF

10uF

"5V Main"

MCP1826T-ADJ

R20

Br Grn

20k

TP4

2.5V / 1A

Requirement: 0.4A

5V_MAIN

3V3

VDDIODDR

6.8uH

3v3out

PVIN

VIN

VOUT

ADJ

PVIN

TP10

R24

PVIN

TP11

C32

C33

C38

C30

C31

4700pF

nSHDN

GND

GND_TAB

R22

R25

PVIN

C37

4.7uF

0.1uF

10k

8.2k

68k

PVIN

10uF

C39

PVIN

SW_ePAD

10uF

PVIN

R23

MCP1826T-ADJ

C34

100uF

C35

10uF

DNP

C36

0.1uF

PVIN_ePAD

19.1k

R27

R148

20k

VIN

BST

1.8V / 1A

VDD

R26

2.61k

VDD

Requirement: 0.2A

C40

1uF

SGND

5V_MAIN

R28

10k

1A, 20V

VDD

PGND

PVDD

PGND

C172

2.2uF

PGND

3V3

PGND_ePAD

MIC24051YJL

C41

R29

10R

3.3V / 6A

R30

1V2

4.7uF

10k

Requirement: 2A

1v2out

PVIN

AVIN

1uH

R31

240k

TP12

C42

33pF

SNS

C43

C44

C45

0.1uF

C46

22uF

R32

249k

1uF

PGND

C47

C48

C49

1uF

MIC23303YML

10000pF 0.1uF

1.2V / 3A

Requirement: 1.6A

TP6

TP7

Black

FIGURE B-2:

EVB-KSZ9477 DDR2 SDRAM

DDR2 SDRAM

DDR_A[0..13]

U7F

B10

C11

DDR_A0

DDR_A1

DDR_A2

DDR_A3

DDR_A4

DDR_A5

DDR_A6

DDR_A7

DDR_A8

DDR_A9

DDR_A10

DDR_A11

DDR_A12

DDR_A13

DDR_A0

DDR_A1

DDR_A2

DDR_A3

DDR_A4

DDR_A5

DDR_A6

DDR_A7

DDR_A8

DDR_A9

DDR_A10

DDR_A11

DDR_A12

DDR_A13

DDR_A[0..13]

DDR_A0

DDR_D[0..15]

DDR_A[0..13]

DDR_A0

DDR_D[16..31]

D11

DDR_D0

DDR_D1

DDR_D2

DDR_D3

DDR_D4

DDR_D5

DDR_D6

DDR_D7

DDR_D8

DDR_D9

DDR_D10

DDR_D11

DDR_D12

DDR_D13

DDR_D14

DDR_D15

DDR_D16

DDR_D17

DDR_D18

DDR_D19

DDR_D20

DDR_D21

DDR_D22

DDR_D23

DDR_D24

DDR_D25

DDR_D26

DDR_D27

DDR_D28

DDR_D29

DDR_D30

DDR_D31

DQ0

DQ1

DQ0

DQ1

DDR_A1

DDR_A2

DDR_A3

DDR_A4

DDR_A5

DDR_A6

DDR_A7

DDR_A8

DDR_A9

DDR_A10

DDR_A11

DDR_A12

DDR_A13

DDR_A1

DDR_A2

DDR_A3

DDR_A4

DDR_A5

DDR_A6

DDR_A7

DDR_A8

DDR_A9

DDR_A10

DDR_A11

DDR_A12

DDR_A13

E10

D10

DQ2

DQ3

C10

DQ4

DQ5

F11

DQ6

DQ7

DQ8

DQ9

DDR_D[0..15]

A10

A11

A12

A13

DQ10

DQ11

DQ12

DQ13

DQ14

DQ15

A10

A11

A12

A13

DQ10

DQ11

DQ12

DQ13

DQ14

DQ15

H12

H17

H13

G17

G16

H15

F17

G15

F16

E17

G14

E16

D17

C18

D16

C17

DDR_D0

DDR_D1

DDR_D2

DDR_D3

DDR_D4

DDR_D5

DDR_D6

DDR_D7

DDR_D8

DDR_D9

DDR_D10

DDR_D11

DDR_D12

DDR_D13

DDR_D14

DDR_D15

DDR_D0

DDR_D1

DDR_D2

DDR_D3

DDR_D4

DDR_D5

DDR_D6

DDR_D7

DDR_D8

DDR_D9

DDR_D10

DDR_D11

DDR_D12

DDR_D13

DDR_D14

DDR_D15

DDR_BA0

DDR_BA1

DDR_BA2

DDR_BA0

DDR_BA1

DDR_BA2

BA0

BA1

BA2

VDDIODDR

BA0

BA1

BA2

VDDIODDR

0.1uF

VDD

C118

C120

C122

C124

C126

VDD

C1190.1uF

C1210.1uF

C1230.1uF

C1250.1uF

C1270.1uF

R146

R147

ODT

CKE

ODT

CKE

DDR_CKE

0.1uF

DDR_CKE

VDDL

C128

VDDL

C1290.1uF

DDR_CLK_P

DDR_CLK_N

0.1uF

DDR_CLK_P

DDR_CLK_N

DDR_D[16..31]

VDDQ

C130

C132

C134

C136

C138

C140

C142

C144

C146

C148

VDDQ

C1310.1uF

C1330.1uF

C1350.1uF

C1370.1uF

C1390.1uF

C1410.1uF

C1430.1uF

C1450.1uF

C1470.1uF

C1490.1uF

B16

B18

C15

A18

C16

C14

D15

B14

A15

A14

E12

A11

B11

F12

A10

E11

DDR_D16

DDR_D17

DDR_D18

DDR_D19

DDR_D20

DDR_D21

DDR_D22

DDR_D23

DDR_D24

DDR_D25

DDR_D26

DDR_D27

DDR_D28

DDR_D29

DDR_D30

DDR_D31

DDR_D16

DDR_D17

DDR_D18

DDR_D19

DDR_D20

DDR_D21

DDR_D22

DDR_D23

DDR_D24

DDR_D25

DDR_D26

DDR_D27

DDR_D28

DDR_D29

DDR_D30

DDR_D31

DDR_CS

DDR_CAS

DDR_RAS

DDR_CAS

DDR_RAS

CAS

RAS

CAS

RAS

DDR_WE

DDR_VREF

VREF

VSS

DDR_DQS1

C150

DDR_DQS3

C151

UDQS

R37

4.7k

0.1uF

R38

4.7k

0.1uF

DDR_BA0

DDR_BA1

DDR_BA2

DDR_BA0

DDR_BA1

DDR_BA2

DDR_DQS0

DDR_DQS2

R40

4.7k

LDQS

R39

4.7k

VSSQ

VSSDL

VSSQ

VSSDL

G11

DDR_RAS

DDR_CAS

DDR_RAS

DDR_CAS

DDR_DQM1

DDR_DQM0

DDR_DQM3

DDR_DQM2

UDM

LDM

UDM

LDM

B12

A12

DDR_CKE

DDR_CLK_P

DDR_CLK_N

DDR_CKE

DDR_CLK

DDR_CLKN

RFU1

RFU2

RFU3

RFU4

RFU1

RFU2

RFU3

RFU4

DDR_CS

DDR_WE

DDR_CS

DDR_WE

G12

E15

B15

D12

DDR_DQM0

DDR_DQM1

DDR_DQM2

DDR_DQM3

DDR_DQM0

DDR_DQM1

DDR_DQM2

DDR_DQM3

MT47H64M16NF-25E

Keep nets as short as possible. Therefore DDR2 devices have to be placed as close as possible to SAMA5D3.

The layout EBI DDR2 should use controlled impedance traces of Z0= 50ohm.

E18

D18

G18

F18

B17

A17

B13

A13

DDR_DQS0

DDR_DQS1

DDR_DQS2

DDR_DQS0

DDR_DQSN0

DDR_DQS1

DDR_DQSN1

DDR_DQS2

DDR_DQSN2

DDR_DQS3

DDR_DQSN3

Address, control and data traces may not exceed 1.3 inches (33mm).

Address, control and data traces must be length matched to within 0.1 inch (2.54mm).

Address, control and data traces must match the data group trace lengths to within 0.25 inch (6.35mm).

DDR_DQS3

DDR_VREF

VDDIODDR

C13

C12

E13

C152

0.1uF

DDR_VREF

DDR_CALN

R43

200R 1%

10uH

VDDIODDR

C153

R41

R42

0.1uF

1.5k

DDR_CALP

C154

4.7uF

ATSAMA5D36A_BGA324

R45

DDR_VREF

200R

R44

C155

C156

1.5k

4.7uF

0.1uF

FIGURE B-3:

EVB-KSZ9477 ETHERNET PORT AND SGMII SFP

Port 1

Port 4

3V3

GREEN (LINK/ACT)

LED4_0

GC1

GA1

LED1_0

GC1

GA1

330R

P4_TXRXA_P

P4_TXRXA_N

TRD1+

P1_TXRXA_P

P1_TXRXA_N

TRD1+

TRCT1

TRD1-

TRD2+

TRCT2

TRD2-

TRD3+

TRCT3

TRD3-

TRD4+

TRCT4

TRD4-

C1 0.1uF 12

FB1

C2 0.1uF 12

TRCT1

TRD1-

TRD2+

TRCT2

TRD2-

TRD3+

TRCT3

TRD3-

TRD4+

TRCT4

TRD4-

P4_TXRXB_P

P4_TXRXB_N

600R

P1_TXRXB_P

P1_TXRXB_N

C3 0.1uF

C5 0.1uF

C7 0.1uF

C4 0.1uF

C6 0.1uF

C8 0.1uF

P4_TXRXC_P

P4_TXRXC_N

P1_TXRXC_P

P1_TXRXC_N

EARTH_ETH

P4_TXRXD_P

P4_TXRXD_N

P1_TXRXD_P

P1_TXRXD_N

EARTH_ETH

3V3

EARTH_ETH

3V3

SHIELD1

GA2

SHIELD1

GA2

LED4_1

GC2

LED1_1

GC2

330R

GREEN (Duplex/Collision)

RJ45 Magjack

Port 2

Port 5

GREEN (LINK/ACT)

3V3

GREEN (LINK/ACT)

LED2_0

GC1

GA1

LED5_0

GC1

GA1

330R

P2_TXRXA_P

P2_TXRXA_N

TRD1+

TRCT1

TRD1-

TRD2+

TRCT2

TRD2-

TRD3+

TRCT3

TRD3-

TRD4+

TRCT4

TRD4-

P5_TXRXA_P

P5_TXRXA_N

TRD1+

TRCT1

TRD1-

TRD2+

TRCT2

TRD2-

TRD3+

TRCT3

TRD3-

TRD4+

TRCT4

TRD4-

C9 0.1uF 12

C10 0.1uF 12

P2_TXRXB_P

P2_TXRXB_N

P5_TXRXB_P

P5_TXRXB_N

C11 0.1uF

C13 0.1uF

C15 0.1uF

C12 0.1uF

C14 0.1uF

C16 0.1uF

P2_TXRXC_P

P2_TXRXC_N

P5_TXRXC_P

P5_TXRXC_N

P2_TXRXD_P

P2_TXRXD_N

P5_TXRXD_P

P5_TXRXD_N

EARTH_ETH

3V3

EARTH_ETH

3V3

SHIELD1

GA2

SHIELD1

GA2

LED2_1

GC2

LED5_1

GC2

330R

GREEN (Duplex/Collision)

RJ45 Magjack

3V3

FB2

FB3

220R

Port 3

C17

10uF

C18

C19

C20

0.1uF

10uF

0.1uF

3V3

GREEN (LINK/ACT)

3V3

LED3_0

GC1

GA1

330R

C21

0.1uF

PORT 7 SFP

R10

10k

R14

P3_TXRXA_P

P3_TXRXA_N

TRD1+

TRCT1

TRD1-

TRD2+

TRCT2

TRD2-

TRD3+

TRCT3

TRD3-

TRD4+

TRCT4

TRD4-

C22 0.1uF 12

10k

J20

R13

TP2

SFP_TX_Fault

SFP_TX_Disable

P3_TXRXB_P

P3_TXRXB_N

C23 0.1uF

C24 0.1uF

C25 0.1uF

S_RX7_N

S_RX7_P

PA18_TWD2

PA19_TWCK2

P3_TXRXC_P

P3_TXRXC_N

VccT

VccR

TP1 Rate_Sel

P3_TXRXD_P

P3_TXRXD_N

SFP_LOS

S_TX7_P

S_TX7_N

EARTH_ETH

3V3

C26

SHIELD1

GA2

Signal Present LED

20P SFP

R15

0.1uF

SFP Cage TH

LED3_1

GC2

330R

VCC

R16

GREEN (Duplex/Collision)

GND

Unused SFP pins:

Br Grn

RJ45 Magjack

TX Fault output

74LVC1G14GW,125

Presence pin (internally grounded)

Rate Select input

FIGURE B-4:

EVB-KSZ9477 SCHEMATIC - KSZ9477 RGMII TO SAMA5D3

RGMII layout requirements

U6A

1. Match lengths within 50 to 100 mils.

U7B

P1_TXRXA_P

P1_TXRXA_N

P1_TXRXB_P

P1_TXRXB_N

P1_TXRXC_P

P1_TXRXC_N

P1_TXRXD_P

P1_TXRXD_N

TXRX1P_A

GTXD0 R134

GTXD1 R135

GTXD2 R136

GTXD3 R137

GRXD0

22R T2

22R N7

22R T3

22R N6

2. RX signals do not need to be length matched to TX signals.

GTXCK

PB0_GTX0

PB1_GTX1

PB2_GTX2

PB3_GTX3

PB4_GRX0

PB5_GRX1

PB6_GRX2

PB7_GRX3

PB8_GTXCK

PB9_GTXEN

PB10_GTXER

PB11_GRXCK

PB12_GRXDV

PB13_GRXER

PB14_GCRS

PB15_GCOL

PB16_GMDC

PB17_GMDIO

PB18_G125CK

PB19_GTX4

PB20_GTX5

PB21_GTX6

PB22_GTX7

PB23_GRX4

PB24_GRX5

PB25_GRX6

PB26_GRX7

PB27

TXRX1M_A

TXRX1P_B

TXRX1M_B

TXRX1P_C

TXRX1M_C

TXRX1P_D

TXRX1M_D

TX_CLK6/REFCLKI6

COL6

3. Due to RGMII timing error in port 6 of KSZ9477, plus

SAMA5D36 compliance to RGMII v1.3, GTXCK must be

routed for additional 2.0 ns delay relative to GTXD[3:0] and

GTXCTL.

GTXCTL

3V3

TX_EN6/TX_CTL6

TX_ER6

GTXD3

GTXD2

GTXD1

GTXD0

TXD6_3

GRXD1

R92

10k

TXD6_2

GRXD2

GRXD3

GTXCK R138

GTXCTL R140

TXD6_1

OSC1

TXD6_0

R93

22R

22R R5

22R P3

LED1_0

LED1_1

105

106

OUT

LED1_0

LED1_1

LED1_0

LED1_1

R139

22R GRXCK

22R GRXCTL

RX_CLK6/REFCLKO6

RX_DV6/CRS_DV6/RX_CTL6

RX_ER6

R141

3V3

GRXCK

C170

P2_TXRXA_P

P2_TXRXA_N

P2_TXRXB_P

P2_TXRXB_N

P2_TXRXC_P

P2_TXRXC_N

P2_TXRXD_P

P2_TXRXD_N

TXRX2P_A

TXRX2M_A

TXRX2P_B

TXRX2M_B

TXRX2P_C

TXRX2M_C

TXRX2P_D

TXRX2M_D

GND VDD

125MHz

GRXCTL

0.1uF

CRS6

RXD6_3

RXD6_2

RXD6_1

RXD6_0

R142

R143

R144

R145

22R

GRXD3

GRXD2

GRXD1

GRXD0

DNP

SYNCLKO

R96

G125REFCK

R149

R150

R151

R152

LED2_0

LED2_1

10k

LED2_0

LED2_1

LED2_0

LED2_1

S_REFCLKP

S_REFCLKM

VDDIOP

P3_TXRXA_P

P3_TXRXA_N

P3_TXRXB_P

P3_TXRXB_N

P3_TXRXC_P

P3_TXRXC_N

P3_TXRXD_P

P3_TXRXD_N

TXRX3P_A

TXRX3M_A

TXRX3P_B

TXRX3M_B

TXRX3P_C

TXRX3M_C

TXRX3P_D

TXRX3M_D

R98

191R 1%

S_REXT

R94

10k

S_TX7M

S_TX7P

S_TX7_N

S_TX7_P

INTRP_N

PB28

PB29

S_RX7M

S_RX7P

S_RX7_N

S_RX7_P

M10

PB30_RXD

PB31_TXD

PB30

PB31

KSZ9477 Output Header

LED3_0

LED3_1

LED3_0

LED3_1

ATSAMA5D36A_BGA324

93 PME_N

90 GPIO

PME_N

GPIO_1

INTRP_N

IBA

GPIO

P4_TXRXA_P

P4_TXRXA_N

P4_TXRXB_P

P4_TXRXB_N

P4_TXRXC_P

P4_TXRXC_N

P4_TXRXD_P

P4_TXRXD_N

TXRX4P_A

TXRX4M_A

TXRX4P_B

TXRX4M_B

TXRX4P_C

TXRX4M_C

TXRX4P_D

TXRX4M_D

GPIO_FILT

PME_N

SYNCLKO

94 INTRP_N

67 IBA_EN

96 SW_RESETN

PME_N

3V3

RESET_N

C166

J16

SPI Activity LED

R100

R103

R104

10k

R101

SYNCLKO

4.7k

0.1uF

U13

22R

10k DNP

MISO

MOSI

SCS

R107

VCC

SCS

LED4_0

LED4_1

SDO

SDI/SDA/MDIO

SCS_N

GND

LED4_0

LED4_1

LED4_0

LED4_1

Blue

100

101

SCLK

74LVC1G14GW,125

112

113

115

116

117

118

120

121

SCL/MDC

R95

Jitter Blocker

P5_TXRXA_P

P5_TXRXA_N

P5_TXRXB_P

P5_TXRXB_N

P5_TXRXC_P

P5_TXRXC_N

P5_TXRXD_P

P5_TXRXD_N

TXRX5P_A

TXRX5M_A

TXRX5P_B

TXRX5M_B

TXRX5P_C

TXRX5M_C

TXRX5P_D

TXRX5M_D

U12

10k

PDB/OE/CLK1

125

126

XO R11

R118

22R

GPIO_FILT

CLK0

GPIO filtered

To replace xtal with DSC1101

oscillator, remove XO resistor

and change pin 4 resistor from

GND to 3V3.

GND

CSEL/CLK2

3V3

25MHz

C171

C167

C168

SPI / I2C

Aardvark

127 ISET

GPIO

ISET

15pF

REFIN

VDD

102

103

LED5_0

LED5_1

LED5_0

LED5_1

0.1uF

LED5_1

R108

PL902xxxUSY

SCLK

MOSI

R99

R102

I2C_SCL

6.04k

KSZ9477S

3V3

I2C_SDA

MISO

SP_CLK

SCS

R106

R12

0R DNP

SCLK

R105

SP_MOSI

MOSI

KSZ9477S Strap Options

Open

R126

J18

3V3

Closed

GRXD0

R109

4.7k

P6 100 Mbps

3V3

GRXD0 RGMII: 1000 Mb/s RGMII: 100 Mb/s

LED2_0 1000B-T master

or 10/100 MDI

1000B-T slave

or 10/100 MDI-X

MR_N

MCU SPI

R153

10k

SW3

SW2

RST_PHY_N

IBA_EN

LED2_0

3V3

J19

IBA Enable

LED4_0 Enable AN

or 100B-TX

Disable AN

or 1000B-T

MISO

MOSI

SCLK

SCS

R110

R111

R112

R113

R114

R115

R116

750R

U14

PC22_SPI1_MISO

PC23_SPI1_MOSI

PC24_SPI1_SPCK

PC25_SPI1_NPCS0

Fast Link Mode LED2_0

AN / FL Speed LED4_0

LED1_0

LED4_0

LED1_0

LED1_1

LED2_1

LED4_1

LED5_1

VCC

RESET

LED1_0 Quiet-WIRE off

LED1_1 Flow control on

LED2_1 Normal link up

LED4_1 SPI

Quiet-WIRE on

Flow control off

Fast link up

I2C

Flow Ctrl LED1_1

Fast Link En LED2_1

Serial IF LED4_1

MRn

WDI

Header 4x2

SW_RESETN

GND

ePAD

RESETn

Install jumpers for CPU to control SPI.

Start Switch LED5_1

TP5

Remove jumpers in 4x2 header when connecting

external SPI or I2C controller to the 5x2 header.

MIC826TYMT

SPST 8POS

LED5_1 Start switch

Don't start switch

IBA on

KSZ9477 Reset

200ms delay

IBA

IBA off

No option:

LED3_1

No option for MDC/MDIO

KSZ9477 Strapping Options

RXD6_[3:2] Port 6 fixed as RGMII

RXD6_1

Not relevant when port is RGMII

SYNCLKO S_REFCLKP/M input clock not used

FIGURE B-5:

EVB-KSZ9477 POWER CONNECTIONS FOR SWITCH AND SOC

3V3

C173

U6B

4.7uF

AVDDL1v2

3V3

VDDIOM

VDDIOP

VDDLS1v2

FB5

FB7

AVDDL

220R

1.2V CORE

2V5

VDDHS2v5

C50

C51

C52

C53

C54

C55

C56

C57

C58

C59

VDDLS

FB6

220R

1uF

0.1uF

VDDHS2v5

C60

0.1uF

C61

2.5V I/O

0.1uF

C62

10uF

6.3V

0603

114

119

124

VDDHS

C63

0.1uF

C64

AVDDH2v5

3V3

0.1uF

AVDDH

VDDIO

2V5

AVDDH2v5

C65

C66

C67

C68

C69

C70

C71

C72

C73

0.1uF

C174

FB8

220R

0.1uF

111

122

128

C74

10uF

6.3V

0603

3V3

VDDANA

108

FB11

220R

1V2

DVDDL

GND

ePAD

1V2

C75

C76

C77

C78

C79

C80

C81

C82

C83

C84

VDDLS1v2

1uF

0.1uF

FB10

107

109

123

129

C85

10uF

6.3V

0603

104

110

VDDOSC

R33

3V3_R

2.2R

10uH

KSZ9477S

C87

1V2

4.7uF

AVDDL1v2

FB12

C86

10uF

6.3V

0603

U7H

A16

GNDCORE_1

GNDCORE_2

GNDCORE_3

GNDCORE_4

GNDCORE_5

GNDCORE_6

VDDCORE_1

VDDCORE_2

VDDCORE_3

VDDCORE_4

VDDCORE_5

VDDCORE_6

VDDCORE_7

1V2

N13

D14

C88

C89

C90

C91

C92

C93

C95

1uF

VDDIODDR

0.1uF

T14

V17

T15

U17

C96

10uF

6.3V

0603

C101

N11

4.7uF

GNDIOP_1

GNDIOP_2

GNDIOP_3

GNDIOP_4

VDDIOP0_1

VDDIOP0_2

VDDIOP1_1

VDDIOP1_2

VDDIOP

V11

L11

C97

C98

C99

C100

0.1uF

H14

F15

F13

F10

E14

D13

F14

G10

G13

H11

GNDIODDR_5

GNDIODDR_4

GNDIODDR_3

GNDIODDR_2

GNDIODDR_1

VDDIODDR_1

VDDIODDR_2

VDDIODDR_3

VDDIODDR_4

VDDIODDR_5

VDDIODDR

C117

10uF

6.3V

0603

C102

C103

C104

0.1uF

J11

T17

P12

T16

GNDIOM_1

GNDIOM_2

VDDIOM_1

VDDIOM_2

VDDIOM

C108

C109

T13

V15

GNDBU

VDDBU

VDDFUSE

VDDOSC

0.1uF

1V2

VDDPLLA

R86

100R

GNDFUSE

GNDOSC

GNDUTMII

GNDPLL

GNDANA

R34

3V3

C110

1V2_R1

T11

R12

P10

U11

U13

R10

VDDOSC

C111

2.2R

10uH

C107

R36

0.1uF

VDDUTMII

VDDPLLA

VDDANA

VDDUTMIC

ADVREF

3V3

C113

4.7uF

0.1uF

VDDPLLA

0.1uF

GNDUTMI

VDDANA

C114

0.1uF

V13

VDDUTMIC

C116

C115

0.1uF

VDDUTMIC

A copper plane for

GNDUTMI covers all

USB components

1V2

R35

1V2_R2

0.1uF

ATSAMA5D36A_BGA324

2.2R

10uH

C112

4.7uF

GNDUTMI

FIGURE B-6:

EVB-KSZ9477 SOC CORE CONNECTIONS NAND FLASH SD CARD

VDDIOP

3V3

R61

R62

R63

R64

JTAG

DEBUG

100k

R59 R60

Serial Comm

J10

68k

NTRST R66

TDI

TMS

DNP

R65

PE13

PB31_TXD

PB30_RXD

TCK

TDO

NRST

R68

R69

0R 11

0R 15

R67

PE14

GND

J11

SAMA5D3x is not using pins 1 and 5 of the debug port.

HDR 20POS .100" DUAL GOLD

VBUS

TP13

R70

PE9_VBUS_SENSE

C105

20k

C157

C158

22pF

J12

R71

U7I

40.2k

Y1 12MHz 18pF

VBUS

2.2uF

V10

U10

USBDAT_N

USBDAT_P

XIN

XOUT

HHSDMA

HHSDPA

D-

USB (Device only)

D+

C159

C160

15pF

MICRO_USB-AB

U16

V16

V12

U12

Y2 32.768kHz 9pF

XIN32

XOUT32

HHSDMB

HHSDPB

GND

T10

T12

V14

U14

WKUP

SHDN

HHSDMC

HHSDPC

MR_N

R72

100k

TP3

TDI

EARTH_USB

MMBD914

3V3

JTAGSEL

TDI

TMS_SWDIO

TCK_SWCLK

TDO

DIBN

DIBP

3V3

U10

TMS

TCK

TDO

N10

DNP

R119

10k

Master Reset

VCC

RESET

M11

R11

VBG

FB9

MRn

WDI

NTRST

P11

U15

R74

5.62k

0402

NTRST

NRST

TST

C161

220R

NRST

SW1

GND

ePAD

RESETn

10pF

EARTH_USB

R75

R76

10k

BMS

MIC826TYMT

NRST

10k

ATSAMA5D36A_BGA324

VDDIOP

GNDUTMI

Reset / 200ms delay

VDDIOP

VDD_MDCI0

VDDIOP

VDDIOM

3V3

R73

100k

R87

IRLML6402

PE22_CLE

PE21_ALE

NAND FLASH

10k

VDDIOM

R90

PE2_PWR_MCI0

100k

U11

I/O0

I/O1

I/O2

I/O3

I/O4

I/O5

I/O6

I/O7

U7G

PE0_MCI0_CD

K12

K15

K14

K16

K13

K17

J12

FLASH_D0

R89

J14

FLASH_D1

FLASH_D2

FLASH_D3

FLASH_D4

FLASH_D5

FLASH_D6

FLASH_D7

10k

NANDRDY

VDDIOM

PD0_MCI0_CDA

CMD

VDD

R/B

C162

10uF

C163

0.1uF

PD1_MCI0_DA0

PD2_MCI0_DA1

PD3_MCI0_DA2

PD4_MCI0_DA3

DNU

K18

J14

GND

VCC

R88

22R

J16

NRD

C164

C165

PD9_MCI0_CK

CLK

J13

NANDCE

D10

D11

D12

D13

D14

D15

J17

0.1uF

PD5_MCI0_DA4

PD6_MCI0_DA5

PD7_MCI0_DA6

PD8_MCI0_DA7

J15

CLE

ALE

VSS

J18

NAND Enable

J13

H16

H18

NWE

10k

D7 SWGND1

SWGND2

NC SWGND3

NC SWGND4

R91

VDDIOM

L12

NANDCE_J

2Gb, x8b NAND Flash

MT29F2G08ABAEAWP:E

NCS3_NANDCS

Proconn Technology

SD/MMC Card Connector

L17

K11

NRD

NWE

NRD_NANDOE

NWE_NANDWE

R120

C169

330R

0.1uF

L18

NANDRDY

SD CARD

ATSAMA5D36A_BGA324

Preferred location is bottom side of board

FIGURE B-7:

EVB-KSZ9477 SOC GPIO LCD CONNECTOR MISC HEADER

5V_MAIN

3V3

U7A

U7D

J10

PA0_LCDDAT0

LCD Connector

PA0_LCDDAT0

PA1_LCDDAT1

PA2_LCDDAT2

PA3_LCDDAT3

PA4_LCDDAT4

PA5_LCDDAT5

PA6_LCDDAT6

PA7_LCDDAT7

PA8_LCDDAT8

PA9_LCDDAT9

PA10_LCDDAT10

PA11_LCDDAT11

PA12_LCDDAT12

PA13_LCDDAT13

PA14_LCDDAT14

PA15_LCDDAT15

PA16_LCDDAT16

PA17_LCDDAT17

PA18_LCDDAT18

PA19_LCDDAT19

PA20_LCDDAT20

PA21_LCDDAT21

PA22_LCDDAT22

PA23_LCDDAT23

PA24_LCDPWM

PA25_LCDDISP

PA26_LCDVSYNC

PA27_LCDHSYNC

PA28_LCDPCK

PA29_LCDDEN

PA30_TWD0

PD0

PD1

PD0_MCI0_CDA

PD1_MCI0_DA0

PD2_MCI0_DA1

PD3_MCI0_DA2

PD4_MCI0_DA3

PD5_MCI0_DA4

PD6_MCI0_DA5

PD7_MCI0_DA6

PD8_MCI0_DA7

PD9_MCI0_CK

PA1_LCDDAT1

PA2_LCDDAT2

PA3_LCDDAT3

PA4_LCDDAT4

PA5_LCDDAT5

PA6_LCDDAT6

PA7_LCDDAT7

PA8_LCDDAT8

PA9_LCDDAT9

PA10_LCDDAT10

PA11_LCDDAT11

PA12_LCDDAT12

PA13_LCDDAT13

PA14_LCDDAT14

PA15_LCDDAT15

R46

R47

0R DNP

PD2

PD3

PD4

PD5

K10

L10

PD6

PD7

PD8

PD9

PD10_SPI0_MISO

PD11_SPI0_MOSI

PD12_SPI0_SPCK

PD13_SPI0_NPCS0

3V3

PD10

PD11

PD12

PD13

PD14

PD15

PD16

PD17

PD18

PD19

PD20

PD21

PD22

PD23

PD24

PD25

PD26

PD27

PD28

PD29

PD30

PD31

NRST

R48

R49

NRST

PE6_RST_LCD

0R DNP

PA24_LCDPWM

PE8_IRQ2

PE7_IRQ1

PD16_SPI0_NPCS3

PD20_AD0

R50

0R DNP

22R

PC27_TWCK1

PC26_TWD1

PA25_LCDDISP

PD16_SPI0_NPCS3 R51

H4 R129

22R

PA18_TWD2

H7 R130

PA19_TWCK2

PD21_AD1

R52

0R DNP

22R

PD20_AD0

PD21_AD1

PD22_AD2

PD23_AD3

PD10_SPI0_MISO R53

3V3

PD22_AD2

R54

0R DNP

22R

PD11_SPI0_MOSI R55

PA29_LCDDEN

PA27_LCDHSYNC

PA26_LCDVSYNC

PA24_LCDPWM

PA25_LCDDISP

PD23_AD3

R56

0R DNP

22R

PA26_LCDVSYNC

PA27_LCDHSYNC

PA28_LCDPCK

PD12_SPI0_SPCK R57

PA28_LCDPCK

R58

22R

PE28_LCDDAT23

PE27_LCDDAT22

PC15_LCDDAT21

PC10_LCDDAT20

PA29_LCDDEN

PA30_TWD0_URXD1

PA31_TWCK0_UTXD1

PA31_TWCK0

ATSAMA5D36A_BGA324

PC11_LCDDAT19

PC12_LCDDAT18

PC13_LCDDAT17

PC14_LCDDAT16

Security

3V3

C94 0.1uF

PA15_LCDDAT15

PA14_LCDDAT14

PA13_LCDDAT13

PA12_LCDDAT12

U15 ATECC508A

VCC

Sec. Dev. Enable

J15

R97

47k

PA11_LCDDAT11

PA10_LCDDAT10

PA9_LCDDAT9

PA8_LCDDAT8

PA19_TWCK2

SCL

SDA

PA18_TWD2

GND

PA7_LCDDAT7

PA6_LCDDAT6

PA5_LCDDAT5

PA4_LCDDAT4

PA3_LCDDAT3

PA2_LCDDAT2

PA1_LCDDAT1

PA0_LCDDAT0

PE23_ID_SYS

U7C

U7E

H10

P13

PC0_ETX0

PC1_ETX1

PC2_ERX0

PC3_ERX1

PC4_ETXEN

PC5_ECRSDV

PC6_ERXER

PC7_EREFCK

PC8_EMDC

PC9_EMDIO

PC10

PE0_A0/NBS0

PE1_A1

PE0_MCI0_CD

R14

R13

V18

P14

U18

T18

R15

P17

P15

P18

R16

N16

R17

N17

R18

N18

P16

M18

N15

M15

N14

M17

M13

M16

N12

M14

M12

L13

L15

L14

L16

PE2_A2

PE2_PWR_MCI0

FPC 50 PIN

PE3_A3

PE4_A4

PE5_A5

PE6_RST_LCD

PE7_IRQ1

PE6_A6

5V_MAIN

3V3

PE7_A7

PE8_IRQ2

PE8_A8

PE9_A9

PE9_VBUS_SENSE

PC10_LCDDAT20

PC11_LCDDAT19

PC12_LCDDAT18

PC13_LCDDAT17

PC14_LCDDAT16

PC15_LCDDAT21

PC16_TK0_AUDIO

PC17_TF0_AUDIO

PC18_TD0_AUDIO

PC19_RK0_AUDIO

PC20_RF0_AUDIO

PC21_RD0_AUDIO

I/O Connector #2

PE10_A10

R131

R123

PC11

PE11_A11

PC12

PE12_A12

DNP

J21

PC13

PE13_A13

PE13

PE14

PE15

PE16

PE17

PE18

PE19

PC14

PE14_A14

PE15

PE16

PE17

PE18

PE19

PA30_TWD0_URXD1

PA31_TWCK0_UTXD1

PC16_TK0_AUDIO

PC17_TF0_AUDIO

PC18_TD0_AUDIO

PC19_RK0_AUDIO

PC20_RF0_AUDIO

PC21_RD0_AUDIO

PC15

PE15_A15_SCK3

PE16_A16_CTS3

PE17_A17_RTS3

PE18_A18_RXD3

PE19_A19_TXD3

PE20_A20_SCK2

PC16

PC17

PD10_SPI0_MISO

PD11_SPI0_MOSI

PD12_SPI0_SPCK

PD13_SPI0_NPCS0

PC18

PC19

PC20

3V3

PC21

PE21_A21/NANDALE

PE22_A22/NANDCLE

PE23_A23_CTS2

PE21_ALE

PE22_CLE

PC22

PC22_SPI1_MISO

PC23_SPI1_MOSI

PC24_SPI1_SPCK

PC25_SPI1_NPCS0

J22

PE23_ID_SYS

PC23

PC24

R132 R133

3.3k 3.3k

PE24_A24_RTS2

I/O Connector #1

PC25

PE25_A25_RXD2

PC26

R125

R124

22R PC26_TWD1

22R PC27_TWCK1

PE26_NCS0_TXD2

PE27_NCS1_TIOA2

PE28_NCS2_TIOB2

PE27_LCDDAT22

PE28_LCDDAT23

PC27

Mounting Holes

MTHOLE 4-40 120DL 220PAD

MH1 MH2 MH3 MH4

PC28

Fiducials

PC29

PE29_NWR1/NBS1_TCLK2

PE30_NWAIT

FID1 FID2 FID3

PC30

PME_N

RST_PHY_N

PC31

PE31_IRQ_PWML1

ATSAMA5D36A_BGA324

FID4 FID5 FID6

EVB-KSZ9477

EVALUATION BOARD

USER’S GUIDE

Appendix C. Bill of Materials (BOM)

C.1 INTRODUCTION

This appendix includes the EVB-KSZ9477 Evaluation Board Bill of Materials (BOM).

 2017 Microchip Technology Inc.

DS50002594A-page 31

TABLE C-1:

BILL OF MATERIALS

Item Qty

Reference

Description

Populated

Manufacturer

Manufacturer Part Number

126 C1, C2, C3, C4, C5, C6, C7, C8, C9, C10,

C11, C12, C13, C14, C15, C16, C18, C20,

C21, C22, C23, C24, C25, C26, C30, C36,

C38, C45, C48, C51, C52, C53, C54, C55,

C56, C57, C58, C59, C60, C61, C63, C64,

C65, C66, C67, C68, C69, C70, C71, C72,

C73, C76, C77, C78, C79, C80, C81, C82,

C83, C84, C88, C89, C90, C91, C92, C93,

C97, C98, C99, C100, C102, C103, C104,

C108, C109, C110, C111, C113, C114, C115,

C116, C118, C119, C120, C121, C122, C123,

C124, C125, C126, C127, C128, C129, C130,

C131, C132, C133, C134, C135, C136, C137,

C138, C139, C140, C141, C142, C143, C144,

C145, C146, C147, C148, C149, C150, C151,

C152, C153, C156, C163, C164, C165, C166,

C169, C170, C171, C174

CAP CER 0.1uF 50V 10% X7R SMD 0402

YES

TDK Corporation

C1005X7R1H104K050BB

13 C17, C19, C28, C29, C37, C39, C62, C74,

C85, C86, C96, C117, C162

CAP CER 10uF 6.3V 20% X5R SMD 0603

YES

AVX

06036D106MAT2A

C27, C94

C31

CAP CER 0.1uF 50V 10% X7R SMD 0402

CAP CER 4700pF 16V 10% X7R SMD 0402

YES

TDK Corporation

C1005X7R1H104K050BB

GRM155R71C472KA01D

Murata Electronics

North America

10 C32, C33, C41, C87, C101, C107, C112,

C154, C155, C173

CAP CER 4.7uF 16V 10% X5R SMD 0603

YES

TDK Corporation

C1608X5R1C475K080AC

C34

CAP CER 100uF 6.3V 20% X5R SMD 1210

CAP CER 1uF 16V 10% X5R SMD 0402

CAP CER 33pF 50V 5% NP0 SMD 0603

CAP CER 22uF 16V 10% X5R SMD 0805

CAP CER 10000pF 16V 10% X7R SMD 0402

CAP CER 2.2uF 16V 10% X5R SMD 0603

CAP CER 22pF 50V 5% NP0 SMD 0402

CAP CER 15pF 50V 5% NP0 SMD 0402

CAP CER 10pF 50V 5% NP0 SMD 0402

LED, Bright Green, 0603

YES

TDK Corporation

Cal-Chip

C3225X5R0J107M250AC

C1005X5R1C105K

GMC10CG330J50NTLF

C2012X5R1C226K

C0402C103K4RACTU

C1608X5R1C225K

GRM1555C1H220JZ01D

GRM1555C1H150JA01D

GRM1555C1H100JZ01D

LTST-C191KGKT

C40, C46, C49, C50, C75, C95

C42

C43, C44

TDK

C47

KEMET

C105, C172

TDK

C157, C158

Murata

C159, C160, C167, C168

Murata

C161

D1, D2

Murata

Lite-On

DIODE SCHOTTKY 20V 1A SOD523

LED, Blue, 0603

NXP USA Inc.

Kingbright

ON Semiconductor

Littlefuse

PMEG2010AEB,115

APT1608VBC/D

DIO RECT MMBD914LT1G 1V 10mA 100V SMD SOT-23-3

FUSE BRD MNT 4A 125VAC/VDC 2SMD

FERRITE 2A 600R SMD 0805

MMBD914LT1G

0154004.DR

FB1

TDK Corporation

MPZ2012S601AT000

BLM18EG221SN1D

10 FB2, FB3, FB5, FB6, FB7, FB8, FB9, FB10,

FB11, FB12

FERRITE 220R @ 100MHz 2A SMD 0603

Murata Electronics

North America

TABLE C-1:

BILL OF MATERIALS (CONTINUED)

Item Qty

Reference

Description

Populated

Manufacturer

Manufacturer Part Number

J1, J2, J3, J4, J5

CON MODULAR RJ45 MAGJACK TH R/A

YES

Amphenol Commercial RJMG2012211A0FR

Products

J6, J13, J15

CON HDR-2.54 MALE 1x2 GOLD 5.84MH TH VERT

HDR 3POS .100" SGL GOLD

YES

Hdr

Hdr-1x36 (FCI, 68000-236HL)

Hdr

Hdr-1x36 (FCI, 68000-236HL)

PJ-002AH

CONN PWR JACK 2.5X5.5MM HIGH CUR

CON FPC 687 0.5MM 50P FEMALE SMD R/A

CON HDR-2.54 MALE 1x6 GOLD 5.84MH TH VERT

HDR 20POS .100" DUAL GOLD

CUI Inc.

WURTH

Hdr

68715014022

J10, J21

J11

Hdr-1x36 (FCI, 68000-236HL)

Hdr

Make from Hdr-2x36 (FCI,

67996-272HLF)

J12

MICRO_USB-AB

YES

JAE Electronics

Hdr

DX4R205JJAR1800

J16, J19

CON HDR-2.54 Male 2x3 Gold 5.84MH TH VERT

Make from Hdr-2x36 (FCI,

67996-272HLF)

J18

J20

J22

Header, 5-Pin, Dual row

YES

Hdr

Make from Hdr-2x36 (FCI,

67996-272HLF)

CON SFP 136 0.80MM 20P Female SMD R/A

HDR 16POS .100" DUAL GOLD

TE Connectivity AMP

Connectors

1367073-1

Hdr

Make from Hdr-2x36 (FCI,

67996-272HLF)

INDUCTOR 6.8uH 9.2A 20% XAL7070-682MEC SMD

Coilcraft

XAL7070-682MEC

INDUCTOR 1uH 2.1A 30% SMD L3W3H1.5

INDUCTOR 10uH 80mA 10% SMD 0603

YES

Taiyo Yuden

NR3015T1R0N

L3, L4, L5, L6

Taiyo Yuden

LBMF1608T100K

IRLML6402TRPBF

ERJ-3GEYJ331V

TRANS FET P-CH IRLML6402 -20V -3.7A 1.3W SOT-23-3

RES TKF 330R 5% 1/10W SMD 0603

International Rectifier

Panasonic

11 R1, R2, R3, R4, R5, R6, R7, R8, R9, R15,

R120

20 R10, R14, R18, R24, R28, R30, R75, R76,

R87, R89, R91, R92, R94, R95, R100, R149,

R150, R151, R152, R153

RES TKF 10k 1% 1/10W SMD 0603

YES

Panasonic

ERJ-3EKF1002V

12 R11, R36, R47, R48, R66, R68, R69, R99,

R102, R105, R106, R126

RES TKF 0R 1/10W SMD 0603

YES

Panasonic

ERJ-3GSY0R00V

R13, R16, R107, R146, R147

RES TKF 1k 5% 1/10W SMD 0603

RES TKF 22R 1% 1/10W SMD 0603

RES TKF 102k 1/10W 1% SMD 0603

YES

Panasonic

Yageo

ERJ-3GEYJ102V

RC0603FR-0722RL

RMCF0603FT102K

R17

R19

Stackpole Electronics

Inc

R20, R27, R70

RES TKF 20k 1% 1/10W SMD 0603

RES TKF 2.2k 1% 1/10W SMD 0603

RES TKF 8.2k 1% 1/10W SMD 0603

RES TKF 19.1k 1% 1/10W SMD 0603

YES

Panasonic

Yageo

ERJ-3EKF2002V

ERJ-3EKF2201V

ERJ-3EKF8201V

RC0603FR-0719K1L

R21

R22

R23

TABLE C-1:

BILL OF MATERIALS (CONTINUED)

Item Qty

Reference

Description

Populated

Manufacturer

Manufacturer Part Number

RMCF0603FT68K0

12 R25, R59, R60, R77, R78, R79, R80, R81,

RES TKF 68k 1% 1/10W SMD 0603

YES

Stackpole Electronics

Inc

R82, R83, R84, R85

R26

R29

RES TKF 2.61k 1% 1/16W SMD 0603

RES TKF 10R 1% 1/10W SMD 0603

YES

MULTICOMP

MC 0.063W 0603 1% 2K61

RMCF0603FT10R0

Stackpole Electronics

Inc

R31

RES TKF 240k 1% 1/10W SMD 0603

YES

Panasonic Electronic

Components

ERJ-3EKF2403V

R32

RES TKF 249k 1% 1/10W SMD 0603

RES TKF 2.2R 5% 1/10W SMD 0603

YES

Panasonic

ERJ-3EKF2493V

R33, R34, R35

Stackpole Electronics

Inc

RMCF0603JT2R20

R37, R38, R39, R40, R103, R109

RES TKF 4.7k 1% 1/10W SMD 0603

RES TKF 1R 1% 1/10W SMD 0603

RES TKF 1.5k 1% 1/10W SMD 0603

RES TKF 200R 1% 1/10W SMD 0603

RES TKF 22R 1% 1/10W SMD 0603

YES

ROHM

Yageo

MCR03EZPFX4701

RC0603FR-071RL

ERJ-3EKF1501V

R41

R42, R44

R43, R45

Panasonic

Yageo

RC0603FR-07200RL

RC0603FR-0722RL

25 R51, R53, R55, R57, R58, R88, R93, R101,

R118, R124, R125, R129, R130, R134, R135,

R136, R137, R138, R139, R140, R141, R142,

R143, R144, R145

Yageo

R61, R62, R63, R64, R72, R73, R90

RES TKF 100k 1% 1/10W SMD 0603

RES TKF 40.2k 1% 1/10W SMD 0603

RES TKF 5.62k 1% 1/16W SMD 0402

RES TKF 100R 1% 1/10W SMD 0603

RES TKF 47k 1% 1/10W SMD 0603

RES TKF 191R 1% 1/10W SMD 0603

RES TKF 6.04k 1% 1/10W SMD 0603

RES TKF 750R 1% 1/10W SMD 0603

RES TKF 1k 1% 1/10W SMD 0603

RES TKF 3.3k 5% 1/10W SMD 0603

RES TKF 0R 1/10W SMD 0603

YES

Panasonic

Yageo

ERJ-3EKF1003V

R71

RC0603FR-0740K2L

CRCW04025K62FKED

MCR03EZPFX1000

ERJ-3EKF4702V

R74

Vishay Dale

ROHM

R86

R97

Panasonic

Yageo

R98

RC0603FR-07191RL

9T06031A6041FBHFT

CRCW0603750RFKEA

ERJ-3EKF1001V

R108

Yageo

R110, R111, R112, R113, R114, R115, R116

Vishay

R117

Panasonic

C&K

R121, R122, R127, R128, R132, R133

ERJ-3GSYJ332V

R148

ERJ-3GSY0R00V

SW1, SW3

Switch, Tactile, SPST, 50mA, 16VDC, J-lead, 4.2 x 3.2 mm, PTS810,

PTS810 SJM 250 SMTR LFS

SW2

SWITCH SLIDE SPST 24V 100mA 1825058-9EXT ACT 8POS 24V

YES

TE Connectivity

1-1825058-9

Alcoswitch Switches

SW4

SWITCH SLIDE SPDT 120V 6A 1101M2S3CQE2 TH

TEST POINT PC MINI .040"D BLACK

YES

C&K Components

Keystone Electronics

NXP

1101M2S3CQE2

5001

TP6, TP7

U1, U13

U8, U9

U11

74LVC1G14GW,125 SCHMITT-TRG INVERTER

IC DDR2 SDRAM 1GBIT 2.5NS 84FBGA

74LVC1G14GW,125

Micron Technology Inc. MT47H64M16NF-25E:M

Micron Technology Inc. MT29F2G08ABAEAWP:E TR

IC, MT29F2G08ABAE, Rev. E, NAND Flash, 2Gb, x8b, TSOP48

Cage, SFP, Amphenol, U77-A1118-200 (-1 or -T)

Amphenol

U77-A1118-2001

TABLE C-1:

BILL OF MATERIALS (CONTINUED)

Item Qty

Reference

Description

Populated

Manufacturer

Abracon

Manufacturer Part Number

ABLS-12.000MHZ-B4-T

CRYSTAL 12MHz 18pF SMD HC49/US

YES

32.768kHz ±20ppm Crystal 9pF 70 kOhm -40°C ~ 85°C Surface

Mount 2-SMD

NDK

NX3215SA-32.768K-STD-MUA-9

Crystal 25MHz 6pF SMD 4Pin DFN LCC

YES

Murata Electronics

North America

ABM8G-25.000MHZ-B4Y-T

J14

Connector, SD/MMC, Push-Pull, RA, SMD, 15 pin+4 shield

OSC MEMS 125.000MHZ CMOS SMD

IC REG LDO ADJ 1A SOT223-6

YES

Proconn Technology

Microchip/Micrel

MICROCHIP

SDC013-A0-5002

DSC1101BI2-125.0000

MCP1826T-ADJE/DC

MIC24051YJL

OSC1

U2, U4

IC REG BUCK ADJ 6A SYNC 28QFN

Microchip/Micrel

4MHz PWM 3A Buck Regulator with HyperLight Load and Power

Good

YES

Microchip Technology

Microchip/Micrel

MIC23303YML

KSZ9477S

IC, 7-Port Gigabit Ethernet Switch with 2 RGMII / MII / RMII Interfaces,

TQFP128

IC, ARM Cortex A5 MPU, 32-bit, 536MHz, 1.2V, 324BGA

IC SUPERVISOR RESET 3.075V 6TDFN

IC JITTER ATTEN

YES

Microchip/Atmel

Microchip/Micrel

Microchip/Micrel Inc

Microchip/Atmel

AVX

ATSAMA5D36A-CU

MIC826TYMT

U10, U14

U12

PL902xxxUSY

U15

IC INTERFACE ATECC508A UDFN-8

CAP CER 10uF 6.3V 20% X5R SMD 0603

RES TKF 0R 1/10W SMD 0603

ATECC508A-MAHDA-T

06036D106MAT2A

ERJ-3GSY0R00V

C35

R12, R46, R49, R50, R52, R54, R56, R65,

R67, R96, R123, R131

Panasonic

R104, R119

RES TKF 10k 1% 1/10W SMD 0603

Panasonic

ERJ-3EKF1002V

Worldwide Sales and Service

AMERICAS

ASIA/PACIFIC

EUROPE

Corporate Office

2355 West Chandler Blvd.

Chandler, AZ 85224-6199

Tel: 480-792-7200

Fax: 480-792-7277

Technical Support:

http://www.microchip.com/

support

Asia Pacific Office

China - Xiamen

Tel: 86-592-2388138

Fax: 86-592-2388130

Austria - Wels

Tel: 43-7242-2244-39

Fax: 43-7242-2244-393

Suites 3707-14, 37th Floor

Tower 6, The Gateway

Harbour City, Kowloon

China - Zhuhai

Tel: 86-756-3210040

Fax: 86-756-3210049

Denmark - Copenhagen

Tel: 45-4450-2828

Fax: 45-4485-2829

Hong Kong

Tel: 852-2943-5100

Fax: 852-2401-3431

India - Bangalore

Tel: 91-80-3090-4444

Fax: 91-80-3090-4123

Finland - Espoo

Tel: 358-9-4520-820

Australia - Sydney

Tel: 61-2-9868-6733

Fax: 61-2-9868-6755

Web Address:

www.microchip.com

France - Paris

Tel: 33-1-69-53-63-20

Fax: 33-1-69-30-90-79

India - New Delhi

Tel: 91-11-4160-8631

Fax: 91-11-4160-8632

Atlanta

Duluth, GA

Tel: 678-957-9614

Fax: 678-957-1455

China - Beijing

Tel: 86-10-8569-7000

Fax: 86-10-8528-2104

France - Saint Cloud

Tel: 33-1-30-60-70-00

India - Pune

Tel: 91-20-3019-1500

China - Chengdu

Tel: 86-28-8665-5511

Fax: 86-28-8665-7889

Germany - Garching

Tel: 49-8931-9700

Germany - Haan

Austin, TX

Tel: 512-257-3370

Japan - Osaka

Tel: 81-6-6152-7160

Fax: 81-6-6152-9310

Boston

Tel: 49-2129-3766400

China - Chongqing

Tel: 86-23-8980-9588

Fax: 86-23-8980-9500

Westborough, MA

Tel: 774-760-0087

Fax: 774-760-0088

Japan - Tokyo

Tel: 81-3-6880- 3770

Fax: 81-3-6880-3771

Germany - Heilbronn

Tel: 49-7131-67-3636

China - Dongguan

Tel: 86-769-8702-9880

Germany - Karlsruhe

Tel: 49-721-625370

Chicago

Itasca, IL

Tel: 630-285-0071

Fax: 630-285-0075

Korea - Daegu

Tel: 82-53-744-4301

Fax: 82-53-744-4302

China - Guangzhou

Tel: 86-20-8755-8029

Germany - Munich

Tel: 49-89-627-144-0

Fax: 49-89-627-144-44

China - Hangzhou

Tel: 86-571-8792-8115

Fax: 86-571-8792-8116

Korea - Seoul

Dallas

Addison, TX

Tel: 972-818-7423

Fax: 972-818-2924

Tel: 82-2-554-7200

Fax: 82-2-558-5932 or

82-2-558-5934

Germany - Rosenheim

Tel: 49-8031-354-560

China - Hong Kong SAR

Tel: 852-2943-5100

Fax: 852-2401-3431

Israel - Ra’anana

Tel: 972-9-744-7705

Malaysia - Kuala Lumpur

Tel: 60-3-6201-9857

Fax: 60-3-6201-9859

Detroit

Novi, MI

Tel: 248-848-4000

Italy - Milan

Tel: 39-0331-742611

Fax: 39-0331-466781

China - Nanjing

Tel: 86-25-8473-2460

Fax: 86-25-8473-2470

Malaysia - Penang

Tel: 60-4-227-8870

Fax: 60-4-227-4068

Houston, TX

Tel: 281-894-5983

Italy - Padova

Tel: 39-049-7625286

China - Qingdao

Tel: 86-532-8502-7355

Fax: 86-532-8502-7205

Indianapolis

Noblesville, IN

Tel: 317-773-8323

Fax: 317-773-5453

Tel: 317-536-2380

Philippines - Manila

Tel: 63-2-634-9065

Fax: 63-2-634-9069

Netherlands - Drunen

Tel: 31-416-690399

Fax: 31-416-690340

China - Shanghai

Tel: 86-21-3326-8000

Fax: 86-21-3326-8021

Singapore

Tel: 65-6334-8870

Fax: 65-6334-8850

Norway - Trondheim

Tel: 47-7289-7561

Los Angeles

China - Shenyang

Tel: 86-24-2334-2829

Fax: 86-24-2334-2393

Mission Viejo, CA

Tel: 949-462-9523

Fax: 949-462-9608

Tel: 951-273-7800

Poland - Warsaw

Tel: 48-22-3325737

Taiwan - Hsin Chu

Tel: 886-3-5778-366

Fax: 886-3-5770-955

Romania - Bucharest

Tel: 40-21-407-87-50

China - Shenzhen

Tel: 86-755-8864-2200

Fax: 86-755-8203-1760

Taiwan - Kaohsiung

Tel: 886-7-213-7830

Raleigh, NC

Tel: 919-844-7510

Spain - Madrid

Tel: 34-91-708-08-90

Fax: 34-91-708-08-91

China - Wuhan

Tel: 86-27-5980-5300

Fax: 86-27-5980-5118

Taiwan - Taipei

Tel: 886-2-2508-8600

Fax: 886-2-2508-0102

New York, NY

Tel: 631-435-6000

Sweden - Gothenberg

Tel: 46-31-704-60-40

San Jose, CA

Tel: 408-735-9110

Tel: 408-436-4270

China - Xian

Tel: 86-29-8833-7252

Fax: 86-29-8833-7256

Thailand - Bangkok

Tel: 66-2-694-1351

Fax: 66-2-694-1350

Sweden - Stockholm

Tel: 46-8-5090-4654

Canada - Toronto

Tel: 905-695-1980

Fax: 905-695-2078

UK - Wokingham

Tel: 44-118-921-5800

Fax: 44-118-921-5820

DS50002594A-page 36

 2017 Microchip Technology Inc.

11/07/16

RMCF0603FT102K [MICROCHIP]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E