RB0505XLS [MICRODC]
Isolated 0.5W Single Output DC/DC Converters;型号: | RB0505XLS |
厂家: | MICRODC POWER TECHNOLOGY CO., LTD |
描述: | Isolated 0.5W Single Output DC/DC Converters |
文件: | 总4页 (文件大小:660K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RB-XLS&RB-XLD Series
Isolated 0.5W Single Output DC/DC Converters
SELECTION GUIDE
Input
Voltage
Output
Voltage
Output
Current
(MA)
Input Current
(Rated Load)
(MA)
Efficiency
(%)
Isolation
Capacitance
(PF)
MTTF1
Order code
(V)
(V)
(KHRS)
RB0303XLS
RB0305XLS
RB0505XLS
RB0505XLD
RB0512XLS
RB0512XLD
RB0515XLS
RB0515XLD
3.3
3.3
5
3.3
5
150
100
100
100
41.5
41.5
33.5
33.5
210
204.5
145
72
74
69
69
77
77
79
79
26
26
28
28
33
33
40
40
1987
1979
1847
1847
981
5
FEATURES
5
5
145
◆RoHS compliant
5
12
12
15
15
130
5
130
981
◆I/O isolation voltage 1000VDC
◆Operating Temperature: -40℃~﹢85℃
◆High efficiency up to 81%
5
126.5
126.5
667
5
667
RB1205XLS
RB1205XLD
RB1212XLS
RB1212XLD
RB1215XLS
RB1215XLD
RB1505XLS
RB1505XLD
RB1512XLS
RB1512XLD
RB1515XLS
RB1515XLD
RB2405XLS
RB2405XLD
RB2412XLS
RB2412XLD
RB2415XLS
RB2415XLD
12
12
12
12
12
12
15
15
15
15
15
15
24
24
24
24
24
24
5
100
100
60.5
60.5
55
69
69
76
76
76
76
69
69
77
77
78
78
70
70
78
78
80
80
36
36
58
58
56
56
27
27
58
58
67
67
61
61
98
98
122
122
1485
1485
869
5
◆Fully encapsulated toroidal magnetics
◆Internal SMD construction
12
12
15
15
5
41.5
41.5
33.5
33.5
100
55
869
55
613
◆Power density up to 0.85W/cm3
◆No electrolytic or tantalum capacitors
◆5V,12Vand 15V output
55
613
46.5
46.5
42.5
42.5
42
2110
2110
1790
1790
1560
1560
1253
1253
784
5
100
12
12
15
15
5
41.5
41.5
33.5
33.5
100
◆No heatsink required
42
◆Dual output from a single input rail
◆UL 94V-0 package material
◆No external components required
◆Industry standard pinout
30
5
100
30
12
12
15
15
41.5
41.5
33.5
33.5
26.5
26.5
26
784
566
26
566
◆Power sharing on output
◆MTTF up to 3.4 million hours
MODEL SELECTION
⑤
①
②
③
④
RB 05 05 X LS(D)
Input Characteristics
①Product Series
③Output Voltage
⑤Package Style
②Input Voltage
④Fixed Input
Parameter
Conditions
Min Typ Max. Units
Continuous operation,5V input types
Continuous operation,12V input types
Continuous operation,15V input types
Continuous operation,24V input types
5V&12V input types
4.5
5
12
15
24
1.6
5
5.5
13.2
16.5
26.4
2.0
10.8
13.5
21.6
Voltage range
V
APPLICATIONS
The RB-XLS(D) series of industrial
temperature range DC/DC converters are the
standard building blocks for on-board
distributed power systems.They are ideally
suited for providing single rail supplies on
primarily digital boards with the added benefit
of galvanic isolation to reduce switching noise.
Surface mount technology and advanced
packaging materials produce rugged reliable
performance over an extended temperature
range from -40°C to 85°C.
Reflected ripple current
mA p-p
15V&24V input types
10.0
Absolute Maximum Ratings
Lead temperature 1.5mm from case for 10 seconds
Internal power dissipation
300°C
550mW
7V
Input voltage VIN,RB0505XLS,RB0512XLS,RB0515XLS
Input voltage VIN,RB1205XLS,RB1212XLS,RB1215XLS
Input voltage VIN,RB1505XLS,RB151XLS,RB1515XLS
Input voltage VIN,RB2405XLS,RB2412XLS,RB2415XLS
15V
18V
28V
MICRODC RESERVES THE COPYRIGHT
1.Calculated using MIL-HDBK-217FN2 calculation model with nominal input voltage at full load.
http://www.microdc.cn Technical Enquiries-Email:tech@microdc.cn Tel:0086-20-86000646
Page 1 of 4
RB-XLS&RB-XLD Series
OUTPUT CHARACTERISTICS
Parameter
Conditions
Min.
Typ.
Max.
Units
Rated Power
Voltage Set Point Accuracy
Line regulation
TA=-40°C to 120°C
See tolerance envelope
High VIN to low VIN
0.5
W
1.0
1.2
%%
Isolation Characteristics
Parameter
Conditions
Flash tested for 1 second
Viso= 1000VDC
Min.
Typ.
Max.
Units
VDC
Isolation test voltage
Resistance
1000
10
GΩ
General Characteristics
Parameter
Conditions
5V input types
12V input types
15V input types
24V input types
Min.
Typ.
110
160
90
Max.
Units
Switching frequency
kHz
80
Temperature Characteristics
Parameter
Specification
Storage
Conditions
Min.
-40
Typ.
Max.
85
Units
All output types
-50
130
℃
5V output types
23
28
Case temperature above ambient
All other output types
TOLERANCE ENVELOPE
RB2405XLS
RB1512XLS,RB1515XLS,RB2412XLS,RB2415XLS
All other types
All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified.Another 24V& 48V products, please inquire Our technical department!
http://www.microdc.cn Technical Enquiries-Email:tech@microdc.cn Tel:0086-20-86000646
Page 2 of 4
RB-XLS&RB-XLD Series
Technical notes
ISOLATION VOLTAGE
"Hi Pot Test","Flash Tested","Withstand Voltage","Dielectric Withstand Voltage"&”Isolation Test Voltage" are all terms that relate to the same thing, a test voltage.
Applied for a specified time, across a component designed to provide electrical isolation, to verify the integrity of that isolation.
Professional Power Module B_XLS series of DC/DC converters are all 100% production tested at their stated isolation voltage. This is 1KVDC for 1 second.
A question commonly asked is,"What is the continuous voltage that can be applied across the part in normal operation?"
For a part holding no specific agency approvals, such as the B_XLS series ,both input and output should normally be maintained within SELV limits i.e. less than 42.4V peak, or
60VDC.The isolation test voltage represents a measure of immunity to transient voltages and the part should never be used as an element of a safety isolation system. The part
could be expected to function correctly with several hundred volts offset applied continuously across the isolation barrier, but then the circuitry on both sides of the barrier must
be regarded as operating at an unsafe voltage and further isolation/insulation systems must form a barrier between these circuits and any user-acssible circuitry according to
safety standard requirements.
REPEATED HIGH-VOLTAGE ISOLATION TESTING
It is well known that repeated high-voltage isolation testing of a barrier component can actually degrade isolation capability, to a lesser or greater degree depending on materials.
Construction and environment. The B_XLS series has toroidal isolation transformers, with no additional insulation between primary and secondary windings of enameled wire. While
parts can be expected to withstand several times the stated test voltage, the isolation capability does depend on the wire insulation. Any material, including this enamel (typically
polyurethane) is susceptible to eventual chemical degradation when subject to very high applied voltages thus implying that the number of tests should be strictly limited. We
therefore strongly advise against repeated high voltage isolation testing. but if it is absolutely required, that the voltage be reduced by 20% from specified test voltage.
This consideration equally applies to agency recognized parts for better than functional isolation where the wire enamel insulation is always supplemented by a further
insulation system of physical spacing or barriers.
OUTPUT RIPPLE REDUCTION
Output ripple reduction
By using the values of inductance and capacitance stated, the output ripple at the rated load is lowered to 5mV p-p max.
Component selection
Capacitor: Ceramic chip capacitors are recommended. It is required that the ESR(Equivalent Series Resistance)should be as low as possible.X7R types are recommended.
The voltage rating should be at least twice(except for 15V output),the rated output voltage of the DC/DC converter.
Inductor: The rated current of the inductor should not be less than of the output of the DC/DC converter. At the rated current, the DC resistance of the inductor should be
such that the voltage drop across the inductor is <2% of the rated voltage of the DC/DC converter. The SRF(Self Resonant Frequency) should be >20MHz.
CHARACTERISATION TEST METHODS
Ripple & Noise Characterization Method
Ripple and noise measurements are performed with the following test configuration.
C1
C2
1μF X7R multilayer ceramic capacitor, voltage rating to be a minimum of 3 times the output voltage of the DC/DC converter
10μF tantalum capacitor, voltage rating to be a minimum of 1.5 times the output voltage of the DC/DC converter with an ESR of less than 100mΩ at 100 KHz
100nF multilayer ceramic capacitor, general purpose
C3
R1
450Ω resistor, carbon film, ±1% tolerance
R2
50Ω BNC termination
T1
3T of the coax cable through a ferrite toroid
RLOAD
Resistive load to the maximum power rating of the DC/DC converter. Connections should be made via twisted wires
Measured values are multiplied by 10 to obtain the speciffied values.
Differential Mode Noise Test Schematic
http://www.microdc.cn Technical Enquiries-Email:tech@microdc.cn Tel:0086-20-86000646
Page 3 of 4
RB-XLS&RB-XLD Series
PACKAGE SPECIFICATIONS
MECHANICAL DIMENSIONS
FOOTPRINT DETAILS
-7 PIN SIP
-14 PIN DIP
7 Pin SIP package
14 Pin DIP package
Pin
1
Function
Pin
1
Function
+Vin
-Vin
2
7
-Vin
NC
4
8
-Vout
+Vout
-Vout
+Vout
No Pin
6
9
11
14
TEMPERATURE DERATING GRAPHS
All dimensions in inches ±0.01(mm±0.25mm).
All pins on a 0.1(2.54) pitch and within ±0.01(0.25)of true position.
RECOMMENDED FOOTPRINT DETAILS
RECOMMENDED FOOTPRINT DETAILS
7 Pin SIP Package
14 Pin SIP Package
All dimensions in inches ±0.01 (mm± 0.25mm).
All dimensions in inches ±0.01 (mm± 0.25mm).
TUBE OUTLINE DIMENSIONS
7 PIN SIP Tube
14 PIN SIP Tube
Unless otherwise stated all dimensions in inches (mm) ±0.5mm.
Tube length (14 Pin DIP) : 20.47 (520mm ±2mm).
Tube length (7 Pin SIP) : 20.47 (520mm ±2mm).
Tube Quantity :25
http://www.microdc.cn Technical Enquiries-Email:tech@microdc.cn Tel:0086-20-86000646
Page 4 of 4
相关型号:
RB050L-60TF
Rectifier Diode, Schottky, 1 Phase, 1 Element, 2A, 60V V(RRM), Silicon, PMDS, 2 PIN
ROHM
©2020 ICPDF网 联系我们和版权申明