HAL1564 [MICRONAS]
First ISO 26262 Compliant Low-Power Hall Switch;型号: | HAL1564 |
厂家: | MICRONAS |
描述: | First ISO 26262 Compliant Low-Power Hall Switch |
文件: | 总2页 (文件大小:124K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRODUCT INFORMATION
April/2016
HAL 15xy
HAL® 15xy
First ISO 26262 Compliant Low-Power Hall Switch
The HAL 15xy family consists of different
Hall switches containing a temperature-
compensated Hall plate with active offset
compensation and comparator, available
optionally with open-drain or current output.
With different switching-point versions, the
HAL 15xy switch family serves a broad vari-
ety of automotive and industrial applications
under harsh temperature conditions.
◆ Reverse-voltage protection at supply pin
◆ Operating with static and dynamic mag-
netic fields up to 12 kHz with low output
jitter. Customized versions are possible
up to 93 kHz.
HAL 15xy fulfills the latest quality and
functional safety standards as AEC-Q100
qualified and ISO 26262 ASIL ready device,
enabling our customers to target even the
most safety-critical applications.
◆ AEC-Q100 qualification
As global Hall switch supplier with long-term
experience since 1993, 1.5 billion shipped
automotive switches and leading expertise
in high-quality Hall-effect sensor solutions,
Micronas expands its large switch portfolio
with the new HAL 15xy family.
◆ ASIL ready device (SPFM 60%)
◆ Additional functional safety features e.g.:
– Power on self-test (signal path test
and wire-break detection)
– Monitoring of bias, undervoltage, and
current level
– Overtemperature protection
– Output current limitation
– Defined fail safe state
Features
All CMOS wafer processing is done in
Micronas’ facilities in Freiburg (Germany) to
ensure best quality control and highest flex-
ibility.
◆ Sampling and output refresh time of 2 s
◆ 3-wire version with a short-circuit pro-
tected open-drain output
◆ 2-wire version with current output
◆ Wide junction temperature range from
40 °C to 170 °C, specially designed for
operation in harsh environments
As improved successor of the well-known
HAL 5xy family, the HAL 15xy is available
as 3-wire version with short-circuit pro-
tected open-drain output and 2-wire version
with current output. HAL 15xy is available in
the smallest SOT23 as well, as TO92UA
package and provides lowest power con-
sumption, fast response times, and special
safety features like a unique power-on self-
test for greater customer benefit at an
excellent price-performance ratio.
◆ Low current consumption of typ. 1.6 mA
◆ Wide supply voltage operation from
◆ High robustness of magnetic character-
2.7 V to 24 V
istics against mechanical stress
◆ Overvoltage protection capability
◆ Broad portfolio of temperature-compen-
up to 40 V
sated constant switching points
◆ Available in the small SOT23 and
TO92UA package
◆ High HBM ESD performance
of up to 8 kV
PRODUCT INFORMATION
April/2016
HAL 15xy
Available Types and Behavior
Major Applications
Version
Type
Switching
Behavior
Switching Points (typ.)
Temp.
2-Wire
Pre-
Our new switch family HAL 15xy is the
optimal system solution for key applications
such as:
Coefficient ISUPlow decessor
BON [mT]
BOFF [mT]
[mA]
[ppm/K]
3-wire HAL 1501
0.4
2.5
0.4
2.5
0
bipolar
HAL 501
◆ Position detection e.g. for seat belt and
HAL 1502
1000
latching
HAL 502
HAL 202
gear shift
HAL 1503
HAL 1506
HAL 1507
HAL 1508
HAL 1509
5.5
18.9
28.2
5.5
3.7
12
3.7
17.3
23.9
3.7
5.5
12
9.4
6
1000
1200
300
1000
1000
0
◆ Index counting e.g. for window lift
unipolar
HAL 506
HAL 508
HAL 509
HAL 549
HAL 516
unipolar
◆ Brushless DC motor commutation e.g.
unipolar
for pumps and fans
unipolar
unipolar inverted
2-wire
HAL 1562 latching
5 to 7 HAL 579
5 to 7 HAL 584
2 to 5 HAL 566
2 to 5 HAL 556
5 to 7 HAL 574
7.6
4.1
6
0
HAL 1563 unipolar inverted
HAL 1564 unipolar inverted
HAL 1565 unipolar
1000
1000
0
4.1
7.6
9.4
HAL 1566 unipolar
System Architecture
HAL 15xy sensors are monolithic integrated
circuits which switch in response to mag-
netic fields. If a magnetic field with flux lines
perpendicular to the sensitive area is
applied to the sensor, the biased Hall plate
forces a Hall voltage proportional to this
field. The Hall voltage is compared with the
actual threshold level in the comparator. If
the magnetic field exceeds the threshold
levels, the output stage (open drain output
for 3-wire devices or current source for
2-wire devices) is switched to the appropri-
ate state.
Switch Point
&
Hysteresis
Control
Reverse
Voltage &
ESD
Protection
Hall Plate
Temperature
Dependent
Bias
Overtemperature
Protection
V
SUP
Comparator
Current
Source
(2-wire
version)
Filter
OUT
The built-in hysteresis eliminates oscillation
and provides switching behavior of the out-
put without toggling. Magnetic offset caused
by mechanical stress is compensated by
using the “switching offset compensation
technique”.
Output
(3-wire
version)
Functional
Safety
Features
GND
The device is able to withstand a maximum
supply voltage of 24 V for unlimited time
and features overvoltage capability up to
40 V load dump.
Fig. 1: Block diagram of the HAL 15xy
All information and data contained in this product information are without any commitment, are not to be consid-
ered as an offer for conclusion of a contract, nor shall they be construed as to create any liability. Product or
development sample availability and delivery are exclusively subject to our respective order confirmation form. By
this publication, Micronas GmbH does not assume responsibility for patent infringements or other rights of third
parties which may result from its use.
No part of this publication may be reproduced, photo-
copied, stored on a retrieval system, or transmitted
without the express written consent of Micronas GmbH.
Edition April 27, 2016; Order No. PI000148_004EN
Micronas GmbH Hans-Bunte-Strasse 19D-79108 Freiburg (Germany)P.O. Box 840D-79008 Freiburg (Germany)
Tel. +49-761-517-0Fax +49-761-517-2174E-mail: docservice@micronas.comwww.micronas.com
相关型号:
©2020 ICPDF网 联系我们和版权申明