HAL3737 [MICRONAS]
Second-Generation 3D HAL® Sensor Family with Superior Angular Accuracy;型号: | HAL3737 |
厂家: | MICRONAS |
描述: | Second-Generation 3D HAL® Sensor Family with Superior Angular Accuracy |
文件: | 总2页 (文件大小:141K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRODUCT INFORMATION
May/2014
HAL 37xy
HAL® 37xy
Second-Generation 3D HAL® Sensor Family
with Superior Angular Accuracy
The HAL 37xy family is the second sensor
generation using Micronas’ proprietary
3D HAL technology, which offers a further
improvement of the angular performance.
Compared to the first generation, a 30%
lower angular error has been achieved.
temperature range resulting in a new class
of accuracy for angular or linear measure-
ments. The sensor features an arbitrarily
programmable stepwise linear characteris-
tic for linearization of the output signal.
Major characteristics can be adjusted to the
magnetic circuit by programming the non-
volatile memory.
◆ 12 bit ratiometric linear analog output for
HAL 372x
◆ Modulo 90°/120° output for HAL 3715
◆ 0.2 kHz to 2 kHz PWM (up to 12 bit) or
12 bit SENT output for HAL 373x
◆ Programmable arbitrary output charac-
Operation with magnetic fields down to
20 mT is enabled thanks to the improved
technology. HAL 3715 and HAL 372x pro-
vide a linear, ratiometric analog output sig-
nal with integrated wire-break detection
working with pull-up or pull-down resistors.
HAL 373x features digital output formats
such as PWM and SENT SAEJ2716 rev.
2010. The digital output format is customer
programmable.
teristic with up to 33 setpoints
◆ Operates from V
=4.5 V up to 5.5 V
SUP
The sensors contain advanced on-board
diagnostic features that enhance fail-safe
detection. The devices are designed for
automotive and industrial applications and
operate in the junction temperature range
from 40 °C up to 170 °C. The sensors are
available in a very small four-pin leaded
transistor package TO92UP, as well as in a
SOIC8 package.
◆ Operates from T =40 °C up to 170 °C
J
◆ Programming via the sensor’s output pin
◆ Programmable characteristics in
EEPROM with redundancy and lock
function
nd
◆ 2 -order temperature-dependent offset
programmable for X/Y- or Z-channel
The sensors can measure three magnetic
◆ On-chip diagnostics
field components B , B , and B . This
X
Y
Z
Features
enables a set of potential applications for
position detection, such as wide distance,
angle or through-shaft angular measure-
ments. On-chip signal processing calcu-
lates the angle out of two of the magnetic
field components and converts this value
into an output signal. The sensor exhibits
excellent drift performance over the specified
◆ Short-circuit protected push-pull output
◆ Over-/reverse-voltage protection at
◆ Measurement extremely robust against
VSUP
temperature and stress influences
◆ Under- and overvoltage detection of
◆ Operating with magnetic field amplitudes
down to 20 mT with an angular accu-
racy of 0.5% FS (digital output, X-Y Hall
plates)
VSUP
◆ Wire-break detection with pull-up and
pull-down resistors
PRODUCT INFORMATION
May/2014
HAL 37xy
Available Types and Behavior
Major Applications
Type
Output Format
Analog Modulo
Analog
Detectable Field Component
The new HAL 37xy family is the optimal
system solution for applications, such as:
HAL 3715
HAL 3725
HAL 3726
HAL 3727
HAL 3735
HAL 3736
HAL 3737
B and B
X
Y
Y
Z
Z
Y
B and B
◆ Linear movement measurements
X
(EGR, clutch, transmission position)
Analog
B and B
Y
◆ Rotary position measurements
Analog
B and B
X
(gear selector, motor air management)
PWM and SENT
PWM and SENT
PWM and SENT
B and B
X
◆ Non-contact potentiometer
B and B
Y
Z
Z
B and B
X
System Architecture
The sensors include two vertical and one
horizontal Hall plate with spinning current
offset compensation for the detection of X,
Y, or Z magnetic field components, a signal
processor for calculation and signal condi-
tioning of two magnetic field components,
protection devices, and a ratiometric linear
analog, PWM, or SENT output.
The spinning current offset compensation
minimizes the errors due to supply voltage
and temperature variations or external
package stress.
VSUP
Internally
stabilized
Supply and
Protection
Devices
Open-circuit,
Overvoltage,
Undervoltage
Detection
Protection
Devices
Temperature
Dependent
Bias
Oscillator
The signal path of HAL 37xy consists of two
channels (CH1 and CH2). Depending on
the product variant, two out of the three
magnetic field components are connected
to Channel 1 and Channel 2.
D/A
Analog
Output
X/Y/Z
Hall Plate
Converter
A/D
A/D
OUT
33 Setpoints
Linearization
DSP
X/Y/Z
Hall Plate
PWM/SENT
Module
The sensors can be used for angle mea-
surements in a range between 0° and 360°
(end-of-shaft and through-shaft setup), as
well as for robust position detection (linear
movement or position). The in-system cali-
bration can be utilized by the system
designer to optimize the performance for a
specific system. The calibration information
is stored in the on-chip EEPROM.
EEPROM Memory
Lock Control
Temperature
Sensor
A/D
Converter
Digital
Output
GND
The HAL 37xy is programmable by modu-
lating the output voltage. No additional pro-
gramming pin is needed.
Fig. 1: Block diagram of the HAL 37xy
All information and data contained in this product information are without any commitment, are not to be consid-
ered as an offer for conclusion of a contract, nor shall they be construed as to create any liability. Product or
development sample availability and delivery are exclusively subject to our respective order confirmation form. By
this publication, Micronas GmbH does not assume responsibility for patent infringements or other rights of third
parties which may result from its use.
No part of this publication may be reproduced, photo-
copied, stored on a retrieval system, or transmitted
without the express written consent of Micronas GmbH.
Edition May 15, 2014; Order No. PI000149_001EN
Micronas GmbH Hans-Bunte-Strasse 19D-79108 Freiburg (Germany)P.O. Box 840D-79008 Freiburg (Germany)
Tel. +49-761-517-0Fax +49-761-517-2174E-mail: docservice@micronas.comwww.micronas.com
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明