NMA-2412-A1T [MICRONETICS]
Noise Source, 10MHz Min, 2000MHz Max, -93dBm/Hz, 81dB, Panel Mount,;
| 型号： | NMA-2412-A1T |
| 厂家： | 
MICRONETICS, INC. |
| 描述： | Noise Source, 10MHz Min, 2000MHz Max, -93dBm/Hz, 81dB, Panel Mount, 射频 微波 |
| 文件： | 总1页 (文件大小：243K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NMA 2400 SERIES
10 MHZ TO 8.5 GH
N
Z
OISE
MODULES
D
ESCRIPTION
The NMA 2400 Noise Module is
ideal for applications like jamming
and built-in-test where high power
and small size are required. The
internally regulated driver provides
long term highly stable noise out-
put. Optional TTL is available for
microprocessor control.
Each NMA 2400 model is designed
for easy integration into a wide
range of equipment, from test sets
to radar units.
NMA 2400 MODULES
RF SPECIFICATIONS BY MODEL NUMBER
NOISE OUTPUT LEVEL
MODEL
FREQUENCY
S
PECIFICATIONS
FLATNESS *
dBm/BAND dBm/Hz
ENR(dB)
(window)
(min)
(min)
(min)
?
Operating Temperature:
NMA-2410
10MHz - 1.0GHz
2.0dB
2.0dB
3.0dB
4.0dB
4.0dB
3.0dB
2.0dB
4.0dB
0
-90.0
84.0
82.2
81.0
78.0
74.0
78.0
74.0
74.0
o
-30 to +85 C
NMA-2411 10MHz - 1.5GHz
NMA-2412 10MHz - 2.0GHz
NMA-2413 10MHz - 4.0GHz
0
0
-91.8
-93.0
-96.0
-100.0
-96.0
-100.0
-100.0
?
?
Storage Temperature:
o
-65 to +125 C
Supply Voltage: +12 / +15 VDC
Internally regulated
0
NMA-2414
NMA-2415
100MHz - 6.0GHz
30MHz - 3.0GHz
-3
-1
-11
-2
?
?
?
Current Draw 350mA max
Output Impedance: 50 ohm
Peak Factor: 5:1
NMA-2416 7.8GHz - 8.5GHz
NMA-2417 2.0GHz - 8.0GHz
* Flatness is defined as the decibel ratio of the highest amplitude peak minus the lowest
across the frequency band.
specifications subject to change
based on technological advances
PERFORMANCE TEST DATA
Each unit ships standard with a spectrum analyzer plot of the noise
output.
Upon special request, Micronetics can supply tabular data
in text file format on CD-ROM or floppy disk. The data
points consist of power spectral density at discrete
A
PPLICATIONS
?
Frequency response built-in-test
(BIT) for communication receivers
Antenna/RF front end testing
70/140 MHz & L-Band modem
BER testing
frequency points across the frequency band.
HOW TO ORDER
?
?
USEFUL NOISE CONVERSIONS
0 dB ENR = -174 dBm/Hz
NMA-24xx-xxx
(equ 1)
(equ 2)
?
?
?
Noise and interference simulation
Jamming / jamming simulation
Power distribution calibration of
multiple receiver systems
Power (dBm) = N +10log (BW)
0
Model #
(see selection above)
where:
N
= Noise spectral density in dBm/Hz
0
Voltage
BW = Bandwidth in Hz
A
= 15V
= 12V
INSTALLATION NOTES
B
1) Should be mounted to a thermally conductive baseplate
2) Select style code T for mechanical clearance of
mating SMA (m) connector nut with respect to
thermally conductive baseplate
Option
1
2
= Stnd
= TTL
3) Warning: when using a narrow band filter following
the noise module, use a 3 dB or greater pad to
prevent damage caused by reflected power
Package
S
= Pkg Style S
= Pkg Style T
T
/
26 HAMPSHI RE DRI VE / HUDSON, NH03051 / TEL: 603- 883- 2900 / FAX: 603- 882- 8987
相关型号：
©2020 ICPDF网 联系我们和版权申明