NMA-2413-B2T [MICRONETICS]

Noise Source, 10MHz Min, 4000MHz Max, -96dBm/Hz, 78dB, Panel Mount,;


型号：	NMA-2413-B2T
厂家：	MICRONETICS, INC.
描述：	Noise Source, 10MHz Min, 4000MHz Max, -96dBm/Hz, 78dB, Panel Mount,
文件：	总1页 (文件大小：243K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

NMA 2400 SERIES

10 MHZ TO 8.5 GH

OISE

MODULES

ESCRIPTION

The NMA 2400 Noise Module is

ideal for applications like jamming

and built-in-test where high power

and small size are required. The

internally regulated driver provides

long term highly stable noise out-

put. Optional TTL is available for

microprocessor control.

Each NMA 2400 model is designed

for easy integration into a wide

range of equipment, from test sets

to radar units.

NMA 2400 MODULES

RF SPECIFICATIONS BY MODEL NUMBER

NOISE OUTPUT LEVEL

MODEL

FREQUENCY

PECIFICATIONS

FLATNESS *

dBm/BAND dBm/Hz

ENR(dB)

(window)

(min)

Operating Temperature:

NMA-2410

10MHz - 1.0GHz

2.0dB

3.0dB

4.0dB

3.0dB

2.0dB

4.0dB

-90.0

84.0

82.2

81.0

78.0

74.0

78.0

74.0

-30 to +85 C

NMA-2411 10MHz - 1.5GHz

NMA-2412 10MHz - 2.0GHz

NMA-2413 10MHz - 4.0GHz

-91.8

-93.0

-96.0

-100.0

-96.0

-100.0

Storage Temperature:

-65 to +125 C

Supply Voltage: +12 / +15 VDC

Internally regulated

NMA-2414

NMA-2415

100MHz - 6.0GHz

30MHz - 3.0GHz

-3

-1

-11

-2

Current Draw 350mA max

Output Impedance: 50 ohm

Peak Factor: 5:1

NMA-2416 7.8GHz - 8.5GHz

NMA-2417 2.0GHz - 8.0GHz

* Flatness is defined as the decibel ratio of the highest amplitude peak minus the lowest

across the frequency band.

specifications subject to change

based on technological advances

PERFORMANCE TEST DATA

Each unit ships standard with a spectrum analyzer plot of the noise

output.

Upon special request, Micronetics can supply tabular data

in text file format on CD-ROM or floppy disk. The data

points consist of power spectral density at discrete

PPLICATIONS

Frequency response built-in-test

(BIT) for communication receivers

Antenna/RF front end testing

70/140 MHz & L-Band modem

BER testing

frequency points across the frequency band.

HOW TO ORDER

USEFUL NOISE CONVERSIONS

0 dB ENR = -174 dBm/Hz

NMA-24xx-xxx

(equ 1)

(equ 2)

Noise and interference simulation

Jamming / jamming simulation

Power distribution calibration of

multiple receiver systems

Power (dBm) = N +10_log(BW)

Model #

(see selection above)

where:

= Noise spectral density in dBm/Hz

Voltage

BW = Bandwidth in Hz

= 15V

= 12V

INSTALLATION NOTES

1) Should be mounted to a thermally conductive baseplate

2) Select style code T for mechanical clearance of

mating SMA (m) connector nut with respect to

thermally conductive baseplate

Option

= Stnd

= TTL

3) Warning: when using a narrow band filter following

the noise module, use a 3 dB or greater pad to

prevent damage caused by reflected power

Package

= Pkg Style S

= Pkg Style T

26 HAMPSHI RE DRI VE / HUDSON, NH03051 / TEL: 603- 883- 2900 / FAX: 603- 882- 8987

相关型号：