MTFDDAT064MAM-1J11ABES

C400v mSATA NAND Flash SSD

Features

C400v mSATA NAND Flash SSD

MTFDDAT032MAM, MTFDDAT064MAM

• Reliability

Features

– MTTF: 1.2 million device hours³

– Static and dynamic wear leveling

– Uncorrectable bit error rate (UBER): <1 sector

per 10¹⁵bits read

• Micron^®25nm MLC NAND Flash

• RoHS-compliant package

• SATA 6 Gb/s interface

• ATA modes supported

– PIO mode 3, 4

• Low power consumption

– <150mW TYP⁴

– Multiword DMA mode 0, 1, 2

– Ultra DMA mode 0, 1, 2, 3, 4, 5

• Industry-standard, 512-byte sector size support

• Native command queuing support with 32-com-

mand slot support

• ATA-8 ACS2 command set compliant

• ATA security feature command set and password

login support

• Endurance: Total bytes written (TBW) – 36TB

• Capacity⁵(unformatted): 32GB, 64GB

• Mechanical – 5mm height

– mSATA connector: 3.3V ±5%

– Caseless design: 50.80mm x 29.85mm x 3.75mm

– Weight: 10g (MAX)

• Field-updateable firmware

• Operating temperature

– Commercial (0°C to +70°C)⁶

• Secure erase (data page) command set: fast and se-

cure erase

1. Typical I/O performance numbers as meas-

ured using Iometer with a queue depth of

32 and write cache enabled.

Notes:

• Self-monitoring, analysis, and reporting technology

(SMART) command set

• Performance^{1, 2}

2. 4K transfers used for READ/WRITE latency

values.

3. The product achieves a mean time between

failure (MTTF) based on population statis-

tics not relevant to individual units.

4. Active power measured during execution of

MobileMark^®2007 with DIPM (device-initi-

ated power management) enabled.

– Sequential 128k READ: up to 500 MB/s

– Sequential 128k WRITE: up to 95 MB/s

– Random 4k READ: up to 45,000 IOPS

– Random 4k WRITE: up to 20,000 IOPS

– PCMark^®Vantage (HDD test suite score): up to

65,000

– READ/WRITE latency: 55µs (TYP)

5. 1GB = 1 billion bytes; formatted capacity is

less.

6. Drive case temperature.

Warranty: Contact your Micron sales representative

for further information regarding the product,

including product warranties.

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

1

Products and specifications discussed herein are subject to change by Micron without notice.

C400v mSATA NAND Flash SSD

Features

Part Numbering Information

Micron’s RealSSD™ C400 SSD is available in different configurations and densities. Visit www.micron.com for a

list of valid part numbers.

Figure 1: Part Number Chart

MT FD

D

AT 032 M AM - 1

J

x

xx

ES

Production Status

Blank = Production

Micron Technology

ES = Engineering sample

Product Family

FD = Flash drive

Operating Temperature Range

Blank = Commercial (0°C to +70°C)

Drive Interface

D = SATA 6.0 Gb/s

Hardware Feature Set

Blank = Null

Drive Form Factor

AT = mSATA

AA = Contact factory

AB = Contact factory

AC = Contact factory

Drive Density

032 = 32GB

Firmware Feature Set

Blank = Null

064 = 64GB

1 = Contact factory

2 = Contact factory

NAND Flash Type

M = MLC

BOM Revision

For example:

1 = 1st generation

Product Family

AM = C400

Sector Size

1 = 512-byte

NAND Flash Component

J = 32Gb, MLC, x8, 3.3V (25nm)

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

2

C400v mSATA NAND Flash SSD

General Description

Micron’s RealSSD solid state drive (SSD) uses a single-chip controller with a SATA inter-

face on the system side and n-channels of Micron NAND Flash internally. Packaged in

an JEDEC-standard mSATA form factor, the SSD integrates easily in existing storage in-

frastructures.

The SSD is designed to use the SATA interface efficiently during both READs and

WRITEs while delivering bandwidth-focused performance. SSD technology enables en-

hanced boot times, faster application load times, reduced power consumption, and ex-

tended reliability.

Figure 2: Functional Block Diagram

NAND

SSD

controller

SATA

NAND

DRAM

buffer

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

3

C400v mSATA NAND Flash SSD

Logical Block Address Configuration

The drive is set to report the number of logical block addresses (LBA) that will ensure

sufficient storage space for the specified density. Standard LBA settings, based on the

IDEMA standard (LBA1-02), are shown below.

Table 1: Standard LBA Settings

Total LBA

Hexadecimal

Max LBA

Hexadecimal

User Available Bytes

(Unformatted)

32,017,047,552

Drive Size

32GB

Decimal

62,533,296

125,045,424

Decimal

62,533,295

125,045,423

3BA2EB0

7740AB0

3BA2EAF

7740AAF

64GB

64,023,257,088

Physical Configuration

Table 2: mSATA Dimensions and Weight

Value

Unit

Width

29.85

50.80

10

mm (NOM)

g (MAX)

Length

Unit weight

Height

3.75

mm (MAX)

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

4

C400v mSATA NAND Flash SSD

Interface Connectors

Figure 3: SSD Interface Connections

Primary side

Secondary side

P1

P17

P15

P51

P52

P18

P16

P2

Table 3: Signal Assignments

Primary Side

Secondary Side

Pin #

1

Signal Name

Reserved

GND

Description

No connect

Ground

Pin #

Signal Name

3V3

Description

+3.3V

2

3

4

GND

Ground

5

6

1V5

No connect

Ground

7

8

Reserved

GND

9

10

12

14

16

18

20

22

24

26

28

30

32

34

36

38

40

42

44

46

48

50

52

11

13

15

17

19

21

23

25

27

29

31

33

35

37

39

41

43

45

47

49

51

Reserved

GND

No connect

Ground

Reserved

GND

No connect

Ground

Reserved

3V3

No connect

+3.3V

+B

Differential signal pair +B

and -B

-B

GND

Ground

GND

Ground

1V5

No connect

Two-wire interface

GND

TWI

-A

Differential signal pair +A

and -A

TWI

+A

GND

Ground

GND

Ground

Reserved

GND

No connect

Ground

GND

Ground

3V3

+3.3V

3V3

+3.3V

Reserved

1V5

No connect

Ground

NC

No connect

Drive activity LED

Presence detection

Optional

DA/DSS

Presence

GND

3V3

+3.3V

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

5

C400v mSATA NAND Flash SSD

Performance

Measured performance can vary for a number of reasons. The major factors affecting

drive performance are the density of the drive and the interface of the host. Additional-

ly, overall system performance can affect the measured drive performance. When com-

paring drives, it is recommended that all system variables are the same, and only the

drive being tested varies.

Performance numbers will vary depending on the host system configuration.

Table 4: Drive Performance

Density

Interface Speed

32GB

6 Gb/s

440

64GB

6 Gb/s

500

Unit

MB/s

IOPS

Sequential read (128k transfer)

Sequential write (128k transfer)

Random read (4k transfer)

Random write (4k transfer)

Read latency

50

95

45,000

15,000

55

45,000

20,000

55

IOPS

µs

Write latency

55

µs

PCMark vantage

55,000

65,000

HDD score

1. Typical I/O performance numbers as measured using IOMeter with a queue depth of 32

and write cache enabled.

Notes:

2. IOMeter measurements are performed on an 8GB span.

3. 4k transfers used for READ/WRITE latency values.

4. System variations may affect measured results.

5. Performance numbers are indicative of C400 firmware version 0009 and newer.

Cache Drive Performance

Micron's RealSSD C400 mSATA drive has been tested with Intel^®Smart Response Tech-

nology and has passed the performance benchmarks for the 'While Using' portion of

the responsiveness requirements provided in the 2012 Ultrabook™ Definition.

Table 5: PCMark Vantage Scores (with 7200 rpm Notebook HDD)

Overall HDD

Suite Score

Windows Movie

Maker Score

C400 RealSSD Devices

32GB as cache

24,000

56,500

80 MB/s

64GB as cache

115 MB/s

1. Disclaimer: Intel Smart Response Technology requires a select Intel^®processor, enabled

chipset, Intel^®Rapid Storage Technology software, and a properly configured storage

solution (HDD + small SSD). Depending on system configuration, results may vary. Con-

tact your system manufacturer for more information.

Note:

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

6

C400v mSATA NAND Flash SSD

Reliability

Micron’s SSDs incorporate advanced technology for defect and error management.

They use various combinations of hardware-based error correction algorithms and

firmware-based static and dynamic wear-leveling algorithms.

Over the life of the SSD, uncorrectable errors may occur. An uncorrectable error is de-

fined as data that is reported as successfully programmed to the SSD but when it is read

out of the SSD, the data differs from what was programmed.

Table 6: Uncorrectable Bit Error Rate

Uncorrectable Bit Error Rate

Operation

<1 sector per 10¹⁵bits read

READ

Mean Time to Failure

Mean time to failure (MTTF) for the SSD can be predicted based on the component reli-

ability data using the methods referenced in the Telcordia SR-332 reliability prediction

procedures for electronic equipment.

Table 7: MTTF

Density

32GB

MTTF (Operating Hours)¹

1.2 million

64GB

1.2 million

1. The product achieves a mean time to failure (MTTF) of 1.2 million hours, based on popu-

lation statistics not relevant to individual units.

Note:

Endurance

Endurance for the SSD can be predicted based on the usage conditions applied to the

device, the internal NAND component cycles, the write amplification factor, and the

wear-leveling efficiency of the drive. The table below shows the drive lifetime for each

SSD density based on predefined usage conditions.

Table 8: Drive Lifetime

Density

32GB

Drive Lifetime (Total Bytes Written)

36TB

64GB

1. Total bytes written calculated with the drive 90% full.

Notes:

2. Access patterns are 50% sequential and 50% random and consist of the following: 5%

are 4k; 5% are 8k; 10% are 16k; 10% are 32k; 35% are 64K; and 35% are 128k.

3. GB/day can be calculated by dividing the total bytes written value by (365 × number of

years). For example: 36 TB/5 years/365 days = 20 GB/day for 5 years.

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

7

C400v mSATA NAND Flash SSD

Electrical Characteristics

Stresses greater than those listed may cause permanent damage to the device. This is a

stress rating only, and functional operation of the device at these or any other condi-

tions above those indicated in the operational sections of this specification is not im-

plied. Exposure to absolute maximum rating conditions for extended periods may affect

reliability.

Table 9: mSATA Power Consumption

Sequential Write/Read Maximum

(128k transfer)

Density

32GB

Idle Average

Active Average

Unit

<65

150

1900

2400

1600

1700

64GB

mW

1. Data taken at 25°C using a 6 Gb/s SATA interface.

Notes:

2. Active average power measured while running MobileMark^®2007 Productivity Suite.

3. DIPM (device-initiated power management) enabled.

4. Sequential power measured in IOMETER MAX with 128KB transfer size.

Table 10: Maximum Ratings

Parameter/Condition

Voltage input

Symbol

3V3

Min

3.14

0

Max

3.46

70

Unit

V

Operating temperature

Non-operating temperature

Rate of temperature change

Relative humidity (non-condensing)

T_C

°C

–40

–

85

°C

20

°C/hour

%

5

95

1. Temperature is best measured with a thermocouple attached to the center point of the

drive controller ASIC package. This is the larger package closest to the interface connec-

tor on the primary side. Refer to the Package Dimensions for details.

Notes:

2. Supply voltage slew rate during asynchronous power-down should follow a slope of no

steeper than 60 mV/ms.

3. Power-off sequence: When the Micron C400 SSD is shut down, the ATA STANDBY IMME-

DIATE (STBI) command should be the last command sent by the host and acknowledged

by the SSD. Failure to follow this process could result in a longer than normal time-to-

ready(TTR) during the subsequent power-on sequence. TTR is the time from power-on

to drive ready to accept SATA commands.

Table 11: Shock and Vibration

Parameter/Condition

Operating shock

Specification

1500 G/1.0ms

Operating vibration

2–500Hz at 3.1G

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

8

C400v mSATA NAND Flash SSD

Device ID

Table 12: Identity Device

See Note 1 for setting definitions

Word

Bit(s)

Setting

Default Value Description

General configuration bit-significant information

0 = ATA device

0

15

14–8

7

F

X

F

0b

0000100b

0b

Retired

1 = removable media device

6

F

1b

Obsolete

5–3

2

X

V

X

F

000b

Retired

0b

Response incomplete

1

0b

Retired

0

0b

Reserved

1

2

3FFFh

C837h

0010h

0000h 0000h

003Fh

0000h 0000h

0000h

varies

Obsolete

F

Specific configuration

3

Obsolete

4

F

Retired

6

F

Obsolete

7

(O)V

( )X

(M)F

( )X

Reserved for assignment by the CompactFlash™ Association

9

Retired

10

20

Serial number (20 ASCII characters)

Retired/Obsolete

0000h 0000h

0000h

23

27

47

(M)F

F

varies

80h

Firmware revision (8 ASCII characters)

Model number (40 ASCII characters)

80h

15–8

7–0

F

10h

00h = Reserved

01h-FFh = Maximum number of logical sectors that shall be

transferred per DRQ data block on READ/WRITE MULTIPLE

commands

48

Trusted Computing feature set options

Shall be cleared to zero

15

14

F

0b

1b

Shall be set to one

13–1

0

0000000000000b Reserved for the Trusted Computing Group

0b

1=Trusted Computing feature set is support

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

9

C400v mSATA NAND Flash SSD

Device ID

Table 12: Identity Device (Continued)

See Note 1 for setting definitions

Word

Bit(s)

Setting

Default Value Description

49

Capabilities

15–14

13

F

00b

1b

Reserved for the IDENTIFY PACKET DEVICE command.

1 = Standby timer values as specified in this standard are

supported

0 = Standby timer values shall be managed by the device

Reserved for the IDENTIFY PACKET DEVICE command.

1= IORDY supported

12

11

F

0b

1b

0 = IORDY may be supported

1 = IORDY may be disabled

1 = LBA supported

10

9

F

1b

8

F

1b

1 = DMA supported.

7–0

00000000b

Retired

50

Capabilities

15

14

13–2

1

F

X

F

0b

1b

Shall be cleared to zero

Shall be set to one

000000000000b Reserved

0b

1b

Obsolete

0

Shall be set to one to indicate a vendor specific standby tim-

er value minimum.

51

53

( )X

F

0000h 0000h

Obsolete

15–3

2

0000000000000b Reserved

F

1b

1 = the fields reported in word 88 are valid

0 = the fields reported in word 88 are not valid

1

0

F

1 = the fields reported in words (70:64) are valid

0 = the fields reported in words (70:64) are not valid

X

Obsolete

54

59

()X

3FFFh 0010h

003Fh FC10h

00FBh

15

14

F

0b

1 = The BLOCK ERASE EXT command is supported

1 = The OVERWRITE EXT command is supported

1 = The CRYPTO SCRAMBLE EXT command is supported

1 = The Sanitize feature set is supported

Reserved

13

F

0b

12

F

0b

11–9

8

F

000b

1b

V

1 = Multiple sector setting is valid

7–0

00000001b

xxh = Current setting for number of logical sectors that shall

be transferred per DRQ data block on READ/WRITE MULTI-

PLE commands

60

M(F)

Varies by capacity Total number of user addressable logical sectors

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

10

C400v mSATA NAND Flash SSD

Device ID

Table 12: Identity Device (Continued)

See Note 1 for setting definitions

Word

62

Bit(s)

Setting

Default Value Description

()X

F

0000h

00000b

0b

Obsolete

Reserved

63

15–11

10

V

1 = Multiword DMA mode 2 is selected

0 = Multiword DMA mode 2 is not selected

9

8

V

0b

1 = Multiword DMA mode 1 is selected

0 = Multiword DMA mode 1 is not selected

1 = Multiword DMA mode 0 is selected

0 = Multiword DMA mode 0 is not selected

7–3

2

F

0000b

1b

Reserved

1 = Multiword DMA mode 2 and below are supported

1 = Multiword DMA mode 1 and below are supported

1 = Multiword DMA mode 0 is supported

Reserved

1

1b

0

1b

64

15–8

7–0

0

03h

0078h

PIO modes supported

65

66

Minimum Multiword DMA transfer cycle time per word

Cycle time in nanoseconds

F

0078h

Manufacturer's recommended Multiword DMA transfer cy-

cle time

Cycle time in nanoseconds

67

68

69

F

0078h

Minimum PIO transfer cycle time without flow control

Cycle time in nanoseconds

Minimum PIO transfer cycle time with IORDY flow control

Cycle time in nanoseconds

F

Additional Supported

15

14

13

0b

1b

0b

1 = CFast Specification Support

1 = Deterministic read after Trim is supported

1 = Long Physical Sector Alignment Error Reporting Control

is supported

12

F

0b

1 = DEVICE CONFIGURATION IDENTIFY DMA and DEVICE

CONFIGURATION SET DMA are supported

11

10

9

F

0b

1 = READ BUFFER DMA is supported

1 = WRITE BUFFER DMA is supported

1 = SET MAX PASSWORD DMA and SET MAX UNLOCK DMA

are supported

8

7

F

0b

1 = DOWNLOAD MICROCODE DMA is supported

Reserved for IEEE-1667

6

0b

1 = Optional ATA device 28-bit commands supported

1 = Read zero after Trim is supported

Reserved

5

0b

4–0

00000b

0000h

70

Reserved

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

11

C400v mSATA NAND Flash SSD

Device ID

Table 12: Identity Device (Continued)

See Note 1 for setting definitions

Word

Bit(s)

Setting

Default Value Description

71

F

0000h 0000h

Reserved for the IDENTIFY PACKET DEVICE command

75

76

Queue depth

15–5

4–0

F

00000000000b Reserved

11111b

Maximum queue depth - 1

Serial ATA Capabilities

15–13

12

F

000b

1b

Reserved

Supports Native Command Queuing priority information

Supports Unload while NCQ commands outstanding

Supports Phy event counters

11

0b

10

1b

9

1b

Supports receipt of host initiated interface power manage-

ment requests

NOTE: HIPM is disabled (bit 9 = 0) for firmware versions

000G and newer

8

7–4

3

F

1b

0000b

1b

Supports native Command Queueing

Reserved for future Serial ATA signaling speed grades

1 = Supports Serial ATA Gen-3 speed (6.0 Gb/s)

1 = Supports Serial ATA Gen-2 speed (3.0 Gb/s)

1 = Supports Serial ATA Gen-1 speed (1.5 Gb/s)

Reserved (set to 0)

2

1b

1

1b

0

0b

77

Serial ATA Additional capabilities

15–6

5

F

0000000000b

Reserved for future Serial ATA definition

Supports NCQ Queue Management Command

Supports NCQ Streaming

0b

4

F

3–1

V

010b

Coded value indicating current negotiated Serial ATA signal

speed

0

F

0b

Shall be cleared to zero

78

Serial ATA features Supported

Reserved

15–7

F

000000000b

6

5

4

3

2

1

0

1b

0b

1b

0b

1 = supports software settings preservation

Reserved

1 = supports in-order data delivery

1 = supports dev initiate interface power management

1 = supports DMA Setup Auto-Activate optimization

1 = supports non-zero buffer offsets in DMA Setup FIS

Reserved (set to 0)

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

12

C400v mSATA NAND Flash SSD

Device ID

Table 12: Identity Device (Continued)

See Note 1 for setting definitions

Word

Bit(s)

Setting

Default Value Description

Serial ATA features Enabled

Reserved

79

15–7

V

000000000b

6

5

4

3

2

1

0

1b

0b

1 = software settings preservation enabled

1 = Asynchronous notification enabled

1 = in-order data delivery enabled

1 = device initiating interface power management enabled

1 = DMA Setup Auto-Activate optimization enabled

1 = non-zero buffer offsets in DMA Setup FIS enabled

Reserved (set to 0)

80

Major revision number

15–10

F

S

F

000000b

1b

Reserved

9

8

7

6

5

4

3

2

1

0

1 = supports ATA8-ACS2

1b

1 = supports ATA8-ACS

1b

1 = supports ATA/ATAPI-7

1 = supports ATA/ATAPI-6

1 = supports ATA/ATAPI-5

1 = supports ATA/ATAPI-4

Obsolete

1b

0b

Obsolete

0b

Obsolete

0b

Reserved

81

0028h

Minor revision number

0028h = ATA8-ACS version 6

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

13

C400v mSATA NAND Flash SSD

Device ID

Table 12: Identity Device (Continued)

See Note 1 for setting definitions

Word

Bit(s)

Setting

Default Value Description

Command set supported

Obsolete

82

15

14

13

12

11

10

9

X

F

X

F

0b

1b

0b

1b

0b

1b

0b

1 = NOP command supported

1 = READ BUFFER command supported

1 = WRITE BUFFER command supported

Obsolete

1 = Host Protected Area feature set supported

1 = DEVICE RESET command supported

1 = SERVICE interrupt supported

1 = release interrupt supported

1 = read look-ahead supported

1 = write cache supported

8

7

6

5

4

Shall be cleared to zero to indicate that the PACKET feature

set is not supported.

3

2

1

0

F

1b

0b

1b

1 = mandatory Power Management feature set supported

Obsolete

1 = Security feature set supported

1 = SMART feature set supported

83

Command set supported

15

14

13

12

11

10

9

F

0b

1b

0b

1b

0b

Shall be cleared to zero

Shall be set to one

1 = FLUSH CACHE EXT command supported

1 = mandatory FLUSH CACHE command supported

1 = Device Configuration Overlay feature set supported

1 = 48-bit Address feature set supported

1 = Automatic Acoustic Management feature set supported

1 = SET MAX security extension supported

See Address Offset Reserved Area Boot INCITS TR27:2001

8

7

6

1 = SET FEATURES subcommand required to spin-up after

power-up

5

4

3

2

1

0

F

0b

1b

0b

1b

1 = Power-Up In Standby feature set supported

Obsolete

1 = Advanced Power Management feature set supported

1 = CFA feature set supported

1 = READ/WRITE DMA QUEUED supported

1 = DOWNLOAD MICROCODE command supported

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

14

C400v mSATA NAND Flash SSD

Device ID

Table 12: Identity Device (Continued)

See Note 1 for setting definitions

Word

Bit(s)

Setting

Default Value Description

Command set/feature supported extension

Shall be cleared to zero

84

15

14

13

12

11

10–9

8

F

0b

1b

0b

00b

1b

0b

1b

Shall be set to one

1 = IDLE IMMEDIATE with UNLOAD FEATURE supported

Reserved for technical report INCITS TR-37-2004 (TLC)

Obsolete

1 = 64-bit Word wide name supported

1 = WRITE DMA QUEUED FUA EXT command supported

7

6

1 = WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT

commands supported

5

4

3

F

1b

0b

1 = General Purpose Logging feature set supported

1 = Streaming feature set supported

1 = Media Card Pass Through Command feature set suppor-

ted

2

1

0

F

0b

1b

1 = Media serial number supported

1 = SMART self-test supported

1 = SMART error logging supported

Command set/feature enabled.

Obsolete

85

15

14

13

12

11

10

9

X

F

0b

1b

0b

1b

0b

1b

0b

1 = NOP command supported

1 = READ BUFFER command supported

1 = WRITE BUFFER command supported

Obsolete

F

X

V

F

1 = Host Protected Area feature set enabled

1 = DEVICE RESET command supported

1 = SERVICE interrupt enabled

1 = release interrupt enabled

1 = look-ahead enabled

8

V

F

7

6

5

1 = write cache enabled

4

Shall be cleared to zero to indicate that the PACKET feature

set is not supported.

3

2

1

0

F

1b

0b

1b

Power Management feature set is enabled

Obsolete

V

1 = Security Mode feature set enabled

1 = SMART feature set enabled

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

15

C400v mSATA NAND Flash SSD

Device ID

Table 12: Identity Device (Continued)

See Note 1 for setting definitions

Word

Bit(s)

Setting

Default Value Description

Command set/feature enabled.

1 = Words 120-119 are valid

86

15

14

13

12

11

10

9

1b

0b

1b

0b

F

V

F

1 = Reserved

1 = FLUSH CACHE EXT command supported

1 = FLUSH CACHE command supported

1 = Device Configuration Overlay supported

1 = 48-bit Address features set supported

1 = Automatic Acoustic Management feature set enabled

1 = SET MAX security enabled by SET MAX SET PASSWORD

8

7

Reserved for address Offset Reserved Area Boot, INCITS

TR27:2001

6

F

0b

1 = SET FEATURES subcommand required to spin-up after

power-up

5

4

3

2

1

0

V

F

0b

1b

0b

1b

1 = Power-Up In Standby feature set enabled

Obsolete

1 = Advanced Power Management feature set enabled

1 = CFA feature set supported

F

1 = READ/WRITE DMA QUEUED command supported

1 = DOWNLOAD MICROCODE command supported

Command set/feature enabled/supported

Shall be cleared to zero

F

87

15

14

13

12

11

10–9

8

F

V

F

0b

1b

0b

00b

1b

0b

1b

Shall be set to one

1 = IDLE IMMEDIATE with UNLOAD FEATURE supported

Reserved for technical report- INCITS tr-37-2004 (TLC)

Reserved for technical report- INCITS TR-37-2004 (TLC)

Obsolete

1 = 64-bit Word wide name supported

1 = WRITE DMA QUEUED FUA EXT command supported

7

6

1 = WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT

commands supported

5

4

3

F

V

1b

0b

1 = General Purpose Logging feature set supported

Obsolete

1 = Media Card Pass Through Command feature set suppor-

ted

2

1

0

V

F

0b

1b

1 = Media serial number is valid

1 = SMART self-test supported

1 = SMART error logging supported

F

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

16

C400v mSATA NAND Flash SSD

Device ID

Table 12: Identity Device (Continued)

See Note 1 for setting definitions

Word

Bit(s)

Setting

Default Value Description

88

0b

Ultra DMA modes

Reserved

15

14

1 = Ultra DMA mode 6 is selected

0 = Ultra DMA mode 6 is not selected

13

12

11

10

9

0b

1 = Ultra DMA mode 5 is selected

0 = Ultra DMA mode 5 is not selected

1 = Ultra DMA mode 4 is selected

0 = Ultra DMA mode 4 is not selected

1 = Ultra DMA mode 3 is selected

0 = Ultra DMA mode 3 is not selected

1 = Ultra DMA mode 2 is selected

0 = Ultra DMA mode 2 is not selected

1 = Ultra DMA mode 1 is selected

0 = Ultra DMA mode 1 is not selected

8

1 = Ultra DMA mode 0 is selected

0 = Ultra DMA mode 0 is not selected

7

6

5

4

3

2

1

0

0b

Reserved

1 = Ultra DMA mode 6 and below are supported

1 = Ultra DMA mode 5 and below are supported

1 = Ultra DMA mode 4 and below are supported

1 = Ultra DMA mode 3 and below are supported

1 = Ultra DMA mode 2 and below are supported

1 = Ultra DMA mode 1 and below are supported

1 = Ultra DMA mode 0 IS supported

1b

89

90

91

92

(O)F

(O)V

0001h

00FEh

FFFEh

Time required for security erase unit completion

Time required for Enhanced security erase completion

Current advanced power management value

Master Password Revision Code

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

17

C400v mSATA NAND Flash SSD

Device ID

Table 12: Identity Device (Continued)

See Note 1 for setting definitions

Word

Bit(s)

Setting

Default Value Description

Shall be 0000h for SATA devices

Shall be cleared to zero

93

15

14

13

0b

Shall be set to one

1 = device detected CBLID-above V_IH

0 = device detected CBLID-below V_IL

Device 1 hardware reset result

Device 0 shall clear these bits to zero

Device 1 shall set these bits as follows:

12

11

0b

Reserved

0 = Device 1 did not assert PDIAG-

1 = Device 1 asserted PDIAG-

10–9

These bits indicate how Device 1 determined the device

number:

00 = Reserved

01 = a jumper was used

10 = the CSEL signal was used

11 = some other method was used or the method is un-

known

8

0b

Shall be set to one

Device 0 hardware reset result. Device 1 shall clear these

bits to zero.

Device 0 shall set these bits as follows:

7

6

0b

Reserved

0 = Device 0 does not respond when Device 1 is selected.

1 = Device 0 responds when Device 1 is selected.

5

4

0b

0 = Device 0 did not detect the assertion of DASP-

1 = Device 0 detected the assertion of DASP-

0 = Device 0 did not detect the assertion of PDIAG-

1 = Device 0 detected the assertion of PDIAG-

3

0b

0 = Device 0 failed diagnostics.

1 = Device 0 passed diagnostics.

2–1

00b

These bits indicate how Device 0 determined the device

number:

00 = Reserved

01 = a jumper was used

10 = the CSEL signal was used

11 = some other method was used or the method is un-

known

0

0b

00h

Shall be set to one

94

95

15–8

7–0

F

V

Vendor's recommended acoustic management value

Current automatic acoustic management value

Stream Minimum Request Size

00h

(O)V

0000h

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

18

C400v mSATA NAND Flash SSD

Device ID

Table 12: Identity Device (Continued)

See Note 1 for setting definitions

Word

96

Bit(s)

Setting

(O)V

(O)F

V

Default Value Description

0000h

Streaming Transfer Time - DMA

Streaming Access Latency - DMA and PIO

Streaming Performance Granularity(98-99)

97

98

0000h 0000h

100

104

105

Varies by capacity Maximum user LBA for 48-bit Address feature set

(O)V

( )F

0000h

0008h

Streaming Transfer Time - PIO

Maximum number of 512-byte blocks of LBA Range Entries

per DATA SET MANAGEMENT command

106

Physical sector size / Logical Sector Size

Shall be cleared to zero

15

14

F

0b

1b

Shall be set to one

13

F

0b

1 = Device has multiple logical sectors per physical sector

1 = Device Logical Sector Longer than 256 Words

Reserved

12

F

0b

11–4

3–0

F

00000000b

0000b

0000h

F

2^x logical sectors per physical sector

107

108

(O)F

Inter-seek delay for ISO-7779 acoustic testing in microsec-

onds

15–12

11–0

15–4

3–0

F

0101b

NAA (3-0)

000000001010b IEEE OUI (23-12)

000001110101b IEEE OUI (11-0)

109

Varies

Unique ID (35-32)

110

111

112

(M)F

(O)F

5-0 Unique ID (31-16)

Unique ID (15-0)

0000h 0000h

Reserved for 128 bit world wide name extension to 128 bits

116

117

(O)V

(O)F

0000h

Reserved for INCITS TR-37-2004

Words per Logical Sector

0000h 0000h

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

19

C400v mSATA NAND Flash SSD

Device ID

Table 12: Identity Device (Continued)

See Note 1 for setting definitions

Word

Bit(s)

Setting

Default Value Description

119

Commands and feature sets supported (Continued from

words 84-82)

15

14

13–6

5

F

0b

Shall be cleared to zero

Shall be set to one

1b

00000001b

0b

Reserved

1 = Free-fall Control feature set is supported

4

1b

1 = The DOWNLOAD MICROCODE command with mode 3 is

supported

3

F

1b

1 = READ LOG DMA EXT and WRITE LOG DMA EXT com-

mands are supported

2

1

F

1b

1 = The Write-Read-Verify feature set is supported

1 = Feature set "Disable Data Transfer After Error Detec-

tion" is supported

0

F

0b

Reserved for DDT

120

Commands and feature sets supported or enabled (Contin-

ued from words 87-85)

15

14

13–6

5

0b

Shall be cleared to zero

Shall be set to one

1b

00000000b

0b

Reserved

1 = Free-fall Control feature set is enabled

4

1b

1 = The DOWNLOAD MICROCODE command with mode 3 is

supported

3

1b

1 = The READ LOG DMA EXT and WRITE LOG DMA EXT

commands are supported

2

1

0

1b

0b

1 = The WRITE UNCORRECTABLE EXT command is supported

1 = The Write-Read-Verify feature set is enabled

1= Feature set "Disable Data Transfer After Error Detection"

is enabled

0 = Feature set "Disable Data Transfer After Error Detec-

tion" is disabled

121

127

F

0000h 0000h

Reserved for expanded supported and enabled settings

(O)

0000h

Obsolete

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

20

C400v mSATA NAND Flash SSD

Device ID

Table 12: Identity Device (Continued)

See Note 1 for setting definitions

Word

Bit(s)

Setting

Default Value Description

128

Security status

15–9

F

V

0000000b

Reserved

8

7–6

5

0b

00b

1b

0b

1b

Security level 0 = High, 1 = Maximum

Reserved

F

1 = Enhanced security erase supported

1 = Security count expired

1 = Security frozen

4

V

3

V

2

V

1 = Security locked

1

V

1 = Security enabled

0

F

1 = Security supported

129

160

( )X

Vendor specific Vendor specific

data

CFA power mode 1

15

14

13

F

0b

Word 160 supported

Reserved

CFA power mode 1 is required for one or more commands

implemented by the device

12

V

F

0b

CFA power mode 1 disabled

11–0

000000000000b Maximum current in ma

161

X

0000h 0000h

0000h

Reserved for assignment by the CompactFlash Association

168

169

15–4

3-0

F

000h

5h

Reserved

Device Nominal Form Factor

DATA SET MANAGEMENT command support

15–1

0

F

000000000000000 Reserved

b

1b

1 = the Trim bit in the DATA SET MANAGEMENT command

is supported

170

0000h 0000h

Additional Product Identifier

174

176

F

0000h 0000h

Varies

Reserved

(O)V

Current media serial number (60 ASCII characters)

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

21

C400v mSATA NAND Flash SSD

Device ID

Table 12: Identity Device (Continued)

See Note 1 for setting definitions

Word

Bit(s)

Setting

Default Value Description

SCT Command Transport

Vendor Specific

206

15–12

X

F

0000b

11–6

000000b

Reserved

5

4

3

2

1

0

F

1b

SCT Command Transport Data Tables supported

CT Command Transport Features Control supported

SCT Command Transport Error Recovery Control supported

SCT Command Transport Write Same supported

SCT Command Transport Long Sector Access supported

SCT Command Transport supported

Reserved for CE-ATA

F

1b

F

1b

F

1b

F

0b

1b

F

207

209

( )F

(O)

F

0000h 0000h

Alignment of logical blocks within a larger physical block

Shall be cleared to zero

15

14

0b

1b

F

Shall be set to one

13–0

F

00000000000000b 'Logical sector' offset within the first physical sector where

the first logical

sector is placed.

210

212

214

(O)V

(O)F

(O)

F

0000h 0000h

0000h 0001h

Write-Read-Verify Sector Count Mode 3 Only

Verify Sector Count Mode 2 Only

NV Cache Capabilities

15–12

11–8

7–5

4

0000b

000b

0b

NV Cache feature set version

F

NV Cache Power Mode feature set version

Reserved

F

V

1 = NV Cache feature set enabled

Reserved

3–2

1

F

00b

V

0b

1 = NV Cache Power Mode feature set enabled

1 = NV Cache Power Mode feature set supported

NV Cache Size in Logical Blocks (LSW)

NV Cache Size in Logical Blocks (MSW)

Nominal media rotation rate (ATA8-ACS 1699-D Revision 6)

0

F

0b

215

216

217

(O)V

(M)F

0000h

0001h

NV Cache Read Transfer Speed in MB/s (ATA8-ACS 1699-D

Revision 3f)

218

219

(O)V

0000h

NV Cache Write Transfer Speed in MB/s

NV Cache Options

15–8

7–0

F

00h

Reserved

Device Estimated Time to Spin Up in Seconds

Reserved

220

221

15–8

7–0

F

00h

V

00h

Write-Read-Verify feature set current mode

Reserved

0000h

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

22

C400v mSATA NAND Flash SSD

Device ID

Table 12: Identity Device (Continued)

See Note 1 for setting definitions

Word

Bit(s)

Setting

Default Value Description

222

Transport Major revision number. 0000h or FFFFh = device

does not report version

15–12

0001b

Transport Type - 0 = Parallel, 1 = Serial, 2-15 = Reserved

Parallel (Type = 0) Serial (Type = 1)

11–6

000000b

1b

Reserved Reserved

5

4

3

2

1

0

Reserved SATA Rev 3.0

Reserved SATA Rev 2.6

Reserved SATA Rev 2.5

Reserved SATA II: Extensions

Reserved SATA 1.0a

1b

ATA8-APT ATA8-AST

223

224

(M)F

( )F

0000h

Transport Minor revision number

Reserved for CE-ATA

0000h 0000h

234

235

236

(O)F

0001h

Minimum number of 512 byte units per DOWNLOAD MI-

CROCODE command for mode 3

00FFh

Maximum number of 512 byte units per DOWNLOAD MI-

CROCODE command for mode 3

0000h 0000h

0000h

Reserved

255

(M)F

Integrity word

Checksum

15–8

7–0

varies

A5h

Signature

1. F = The content of the word is fixed and does not change.

V = The content of the word is variable and may change depending on the state of the

device or the commands executed by the device.

Note:

X = The content of the word may be fixed or variable.

R = The content of the word is reserved and will be zero.

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

23

C400v mSATA NAND Flash SSD

Commands

Table 13: Supported ATA Command Set

See ATA-8 standard for command details

Command Name

Command Code (hex)

CHECK POWER MODE

DEVICE CONFIGURATION RESTORE

DEVICE CONFIGURATION FREEZE LOCK

DEVICE CONFIGURATION IDENTIFY

DEVICE CONFIGURATION SET

DOWNLOAD MICROCODE

EXECUTE DEVICE DIAGNOSTIC

FLUSH CACHE

98h or E5h

B1h/C1h

B1h/C3h

B1h/C1h

B1h/C3h

92h

90h

E7h

FLUSH CACHE EXT

EAh

IDENTIFY DEVICE

ECh

IDLE

E3h or 97h

E1h or 95h

91h

IDLE IMMEDIATE

INITIALIZE DEVICE PARAMETERS

NOP

00h

READ BUFFER

E4h

READ DMA (with retry)

READ DMA (without retry)

READ DMA EXT

C8h

C9h

25h

READ FPDMA QUEUED

READ LOG EXT

60h

2Fh

READ MULTIPLE

C4h

READ MULTIPLE EXT

29h

READ NATIVE MAX ADDRESS

READ NATIVE MAX ADDRESS EXT

READ SECTOR(S) EXT

F8h

27h

24h

READ SECTOR(S) (with retry)

READ SECTOR(S) (without retry)

READ VERIFY SECTOR EXT

READ VERIFY SECTOR(S) (with retry)

SCT WRITE SAME

20h

21h

42h

40h

02h/0001h

02h/0002h

02h/0101h

02h/0102h

SCT RETURN ERROR RECOVERY CONTROL

SCT SET ERROR RECOVERY CONTROL

SCT SET FEATURE CONTROL

030h/01h

03h/01h

04h/01h

04h/02h

SCT RETURN FEATURE CONTROL

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

24

C400v mSATA NAND Flash SSD

Commands

Table 13: Supported ATA Command Set (Continued)

See ATA-8 standard for command details

Command Name

Command Code (hex)

04h/03h

05h/01h

F6h

SCT RETURN FEATURE OPTION FLAG

SCT RETURN SCT DATA TABLE

SECURITY DISABLE PASSWORD

SECURITY ERASE PREPARE

SECURITY ERASE UNIT

SECURITY FREEZE LOCK

SECURITY SET PASSWORD

SECURITY UNLOCK

F3h

F4h

F5h

F1h

F2h

SEEK

7xh

SET FEATURES

EFh

SET MAX ADDRESS

F9h

SET MAX – FREEZE LOCK

SET MAX – LOCK

F9h/04h

F9h/02h

37h

SET MAX ADDRESS EXT

SET MULTIPLE MODE

SET MAX – SET PASSWORD

SET MAX – UNLOCK

C6h

F9h/01h

F9h/03h

E6h or 99h

B0h/D9h

B0h/D8h

B0h/D2h

B0h/D4h

B0h/D0h

B0h/D5h

B0h/DAh

B0h/D6h

E2h or 96h

E0h or 94h

E8h

SLEEP

SMART DISABLE OPERATIONS

SMART ENABLE OPERATIONS

SMART ENABLE/DISABLE AUTOSAVE

SMART EXECUTE OFF-LINE IMMEDIATE

SMART READ DATA

SMART READ LOG SECTOR

SMART RETURN STATUS

SMART WRITE LOG

STANDBY

STANDBY IMMEDIATE

WRITE BUFFER

WRITE DMA (with retry)

WRITE DMA (without retry)

WRITE DMA EXT

CAh

CBh

35h

WRITE DMA FUA EXT

WRITE FPDMA QUEUED

WRITE LOG EXT

3Dh

61h

3Fh

WRITE MULTIPLE

C5h

WRITE MULTIPLE EXT

39h

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

25

C400v mSATA NAND Flash SSD

Commands

Table 13: Supported ATA Command Set (Continued)

See ATA-8 standard for command details

Command Name

Command Code (hex)

WRITE MULTIPLE FUA EXT

WRITE SECTOR(S) (with retry)

WRITE SECTOR(S) EXT

CEh

30h

34h

45h

WRITE UNCORRECTABLE EXT

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

26

C400v mSATA NAND Flash SSD

Compliance

Micron SSDs comply with the following:

• RoHS “green”

• CE (Europe): EN55022, 2006 Class B and EN55024, 1998 + A1: 2001 + A2:2003

• FCC: CFR Title 47, Part 15, ICES-003, all Class B

• UL (US): approval to UL-60950-1, 2nd Edition, 2007-03-27, IEC 60950-1:2005, 2nd Ed-

ition

• BSMI (Taiwan): approval to CNS 13438

• C-TICK (Australia, New Zealand): approval to AS/NZS CISPR22

• KCC RRL (Korea): approval to KCC MU2-C30025, KCC MU2-C30018 Class B

• W.E.E.E.: Compliance with EU WEEE directive 2002/96/EC. Additional obligations

may apply to customers who place these products in the markets where WEEE is en-

forced.

• TUV (Germany): approval to IEC60950/EN60950

• V_CCI

• IC (Canada):

- This Class B digital apparatus complies with Canadian ICES-003.

- Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

FCC Rules

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-

sonable protection against harmful interference in a residential installation. This equip-

ment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio com-

munications. However, there is no guarantee that interference will not occur in a partic-

ular installation. If this equipment does cause harmful interference to radio or televi-

sion reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following meas-

ures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the re-

ceiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

27

C400v mSATA NAND Flash SSD

Package Dimensions

Figure 4: mSATA Package – 50.80mm

2.60mm

0.102in

(2 PLCS)

DIA THRU

3.11mm

0.122in

P1

0.75mm

0.030in

1.00mm

RAD

0.039in

5.69mm

0.224in

(2 PLCS)

3.75mm

0.148in

1.40mm

0.055in

1.00mm

0.039in

1.35mm

0.053in

4.34mm

0.171in

3.53mm

0.139in

(2 PLCS)

2.08mm

0.082in

2.83mm

0.111in

11.08mm

0.436in

29.85mm

1.175in

2.08mm

0.082in

2.83mm

0.111in

2.75mm

0.108in

5.27mm

0.207in

50.80mm

2.000in

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

28

C400v mSATA NAND Flash SSD

References

• Serial ATA: High-speed serialized AT attachment, Serial ATA working group, available

at www.sata-io.org

• SATA 3.0 GOLD

• ATA-8 ACS2

• JEDEC MO-300B (mSATA SSD Assembly)

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

29

C400v mSATA NAND Flash SSD

Revision History

Rev. E – 8/12

• Changed MTBF to MTTF.

• Added new power-off sequence note to Maximum Ratings table.

• Added new note to Word 76 in Device ID table.

Rev. D – 4/12

• In Features section, removed reference to hot-plug-capable and changed caseless de-

sign height from 3.80mm to 3.75mm.

• In Physical Configuration section, changed height from 3.80mm to 3.75mm.

• Updated package dimensions figure (mSATA Package – 50.80mm):

– 3.80mm to 3.75mm

– 0.150in to 0.148in

– 1.40mm to 1.35mm

– 0.055in to 0.053in

Rev. C – 3/12

Rev. B – 1/12

Rev. A – 10/11

• Added Cache Drive Performance table to Performance.

• Added 32GB.

• Initial release.

8000 S. Federal Way, P.O. Box 6, Boise, ID 83707-0006, Tel: 208-368-3900

www.micron.com/productsupport Customer Comment Line: 800-932-4992

Micron and the Micron logo are trademarks of Micron Technology, Inc.

All other trademarks are the property of their respective owners.

This data sheet contains minimum and maximum limits specified over the power supply and temperature range set forth herein.

Although considered final, these specifications are subject to change, as further product development and data characterization some-

times occur.

PDF: 09005aef8485be28

realssd_c400v_msata.pdf - Rev. E 8/12 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

30


型号：	MTFDDAT064MAM-1J11ABES
厂家：	MICRON TECHNOLOGY
描述：	C400v mSATA NAND Flash SSD
文件：	总30页 (文件大小：327K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MTFDDAT064MAM-1J11ABES [MICRON]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E