1N4580A-1E3 [MICROSEMI]
Zener Diode, 6.4V V(Z), 5%, 0.5W, Silicon, DO-35, HERMETIC SEALED, GLASS, DO-7, 2 PIN;
| 型号： | 1N4580A-1E3 |
| 厂家： | 
Microsemi |
| 描述： | Zener Diode, 6.4V V(Z), 5%, 0.5W, Silicon, DO-35, HERMETIC SEALED, GLASS, DO-7, 2 PIN |
| 文件： | 总4页 (文件大小：321K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
1N4565 thru 1N4584A-1 DO-35
6.4 Volt Temperature Compensated Zener
Reference Diodes
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
The popular 1N4565 thru 1N4584A-1 series of Zero-TC Reference Diodes
provides a selection of both 6.4 V nominal voltages and temperature
coefficients to as low as 0.0005%/oC for minimal voltage change with
temperature. Four different operating currents are available for selection at
0.5 mA, 1.0 mA, 2.00 mA, and 4.00 mA. These glass axial-leaded DO-35
reference diodes are optionally available with an internal-metallurgical-bond
by adding a “-1” suffix. This same “-1” bonded Zener package construction
is also available in JAN, JANTX, and JANTXV military qualifications.
Microsemi also offers numerous other Zener Reference Diode products for a
variety of other voltages up to 200 V.
DO-35
(DO-204AH)
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
•
JEDEC registered 1N4565 thru 1N4584 series
• Provides minimal voltage changes over a broad
temperature range for instrumentation and other
circuit designs requiring a voltage reference
Internal metallurgical bond option available by
adding a “-1” suffix
• Temperature coefficient selections available from
•
•
Zener reference voltage of 6.4 V +/- 5% with tighter
tolerance available at lower voltage
1N4565 thru 1N4584 also have qualification to MIL-
PRF-19500/452 by adding the JAN, JANTX, or
JANTXV prefixes to part numbers a well as the “-1”
suffix; e.g. JANTX1N4574A-1, etc.
0.01%/ºC to 0.0005%/ºC
• Tight reference voltage tolerances available with
nominal value centered at 6.2 V by adding tolerance
1%, 2%, 3%, etc. after the part number for
identification, e.g. 1N4569-2%, 1N4579A-1%,
1N4574A-1-1%, etc.
•
Military surface mount equivalents also available in
DO-213AA by adding UR-1 suffix and the JAN,
JANTX, and JANTXV prefix, e.g.
•
Flexible axial-leaded mounting terminals
• Nonsensitive to ESD per MIL-STD-750 Method 1020
• Typical low capacitance of 100 pF or less
JANTX1N4569AUR-1 (see separate data sheet)
•
•
Also available in DO-7 package including military
qualifications up to JANS (see separate data sheet)
JANS equivalent available in DO-35 via SCD
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
•
•
Operating Temperatures: -65oC to +175oC
•
•
CASE: Hermetically sealed glass case. DO-35
Storage Temperatures: -65oC to +175oC
(DO-204AH) package
DC Power Dissipation: 500 mW @ TL = 25oC with
maximum current IZM 70 mA. NOTE: For optimum
voltage-temperature stability, the operating test
current (IZT) should be as specified in the Electrical
Characteristics Table (power less than 30 mW)
TERMINALS: Leads, tin-lead plated solderable per
MIL-STD-750, Method 2026
MARKING: Part number and cathode band
POLARITY: Reference diode to be operated with
the banded end positive with respect to the
opposite end
•
•
•
Solder Temperatures: 260oC for 10 s (max)
•
TAPE & REEL option: Standard per EIA-296 (add
“TR” suffix to part number)
•
•
WEIGHT: 0.2 grams.
See package dimensions on last page
Copyright 2003
Microsemi
Page 1
10-27-2003 REV B
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
1N4565 thru 1N4584A-1 DO-35
6.4 Volt Temperature Compensated Zener
Reference Diodes
S C O T T S D A L E D I V I S I O N
*ELECTRICAL CHARACTERISTICS @ 25oC, unless otherwise specified
ZENER TEST
MAX. DYNAMIC
MAXIMUM
REVERSE
CURRENT
IR @ 3 V
µA
JEDEC TYPE
Number
CURRENT
(Note 3)
IZT
IMPEDANCE
(Note 2)
ZZT @ IZT
OHMS
200
200
200
200
200
200
200
200
200
200
100
100
100
100
100
100
100
100
100
100
50
MAXIMUM VOLTAGE TEMPERATURE
COEFFICIENT
(Notes 1 & 4)
mA
.5
αVZ +/- %/oC
+/- mV/oC
.64
.64
.32
.32
.13
.13
.06
.06
.03
.03
.64
.64
.32
.32
.13
.13
.06
.06
.03
.03
.64
.64
.32
.32
.13
.13
.06
.06
.03
.03
.64
.64
.32
.32
.13
.13
.06
.06
.03
.03
Temp. Range
1N4565
1N4565A
1N4566
1N4566A
1N4567
1N4567A
1N4568
1N4568A
1N4569
1N4569A
1N4570
1N4570A
1N4571
1N4571A
1N4572
1N4572A
1N4573
1N4573A
1N4574
1N4574A
1N4575
1N4575A
1N4576
1N4576A
1N4577
1N4577A
1N4578
1N4578A
1N4579
1N4579A
1N4580
1N4580A
1N4581
1N4581A
1N4582
1N4582A
1N4583
1N4583A
1N4584
1N4584A
.01
.01
0 to +75oC
-55 to +100oC
0 to +75oC
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
.5
.5
.005
.005
.002
.002
.001
.001
.0005
.0005
.01
.5
-55 to +100oC
0 to +75oC
.5
.5
-55 to +100oC
0 to +75oC
.5
.5
-55 to +100oC
0 to +75oC
.5
.5
-55 to +100oC
0 to +75oC
.5
.5
.01
-55 to +100oC
0 to +75oC
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
.005
.005
.002
.002
.001
.001
.0005
.0005
.01
-55 to +100oC
0 to +75oC
-55 to +100oC
0 to +75oC
-55 to +100oC
0 to +75oC
-55 to +100oC
0 to +75oC
.01
-55 to +100oC
0 to +75oC
50
.005
.005
.002
.002
.001
.001
.0005
.0005
.01
50
-55 to +100oC
0 to +75oC
50
50
-55 to +100oC
0 to +75oC
50
50
-55 to +100oC
0 to +75oC
50
50
-55 to +100oC
0 to +75oC
50
25
.01
-55 to +100oC
0 to +75oC
25
.005
.005
.002
.002
.001
.001
.0005
.0005
25
-55 to +100oC
0 to +75oC
25
25
-55 to +100oC
0 to +75oC
25
25
-55 to +100oC
0 to +75oC
25
25
-55 to +100oC
25
*JEDEC Registered Data.
NOTES:
1. When ordering devices with tighter tolerances than specified for the VZ voltage nominal of 6.2V, add a hyphened suffix to the
part number for desired tolerance, e.g. 1N4569A-2%, 1N4574A-1-1%, 1N4579-1-2%, 1N4584A-1-3%, etc.
2. Zener impedance is measured by superimposing 0.75 mA ac rms on 7.5 mA dc @ 25oC.
3. Voltage measurements to be performed 15 seconds after application of dc current.
4. 1N4565A thru 1N4584A also have qualification to MIL-PRF-19500/452 by adding the JAN, JANTX, JANTXV, or
JANS prefixes to part numbers as well as the “-1” suffix; e.g. JANTX1N4569A-1, JANTXV1N4574A-1, etc.
Copyright 2003
10-27-2003 REV B
Microsemi
Page 2
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
1N4565 thru 1N4584A-1 DO-35
6.4 Volt Temperature Compensated Zener
Reference Diodes
S C O T T S D A L E D I V I S I O N
GRAPHS
Typical change of
Temperature Coefficient
with change in
Typical Change
in Zener Voltage
with change in
Operating Current
Operating Current
IZ – Operating Current (mA)
IZ – Operating Current (mA)
1N4565 – 1N4569A
IZ – Operating Current (mA)
IZ – Operating Current (mA)
1N4570 – 1N4574A
IZ – Operating Current (mA)
IZ – Operating Current (mA)
1N4575 – 1N4579A
Copyright 2003
Microsemi
Page 3
10-27-2003 REV B
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
1N4565 thru 1N4584A-1 DO-35
6.4 Volt Temperature Compensated Zener
Reference Diodes
S C O T T S D A L E D I V I S I O N
IZ – Operating Current (mA)
IZ – Operating Current (mA)
1N4580 – 1N4584A
PACKAGE DIMENSIONS
All dimensions in INCH
mm
Copyright 2003
Microsemi
Scottsdale Division
Page 4
10-27-2003 REV B
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明