概述
规格参数
数据手册1N753C 概述
SILICON 400 mW ZENER DIODES SILICON 400毫瓦齐纳二极管 齐纳二极管
1N753C 规格参数
| 是否Rohs认证： | 不符合 | 生命周期： | Obsolete |
| 零件包装代码： | DO-7 | 包装说明： | O-LALF-W2 |
| 针数： | 2 | Reach Compliance Code： | unknown |
| ECCN代码： | EAR99 | HTS代码： | 8541.10.00.50 |
| 风险等级： | 5.64 | Is Samacsys： | N |
| 其他特性： | METALLURGICALLY BONDED | 外壳连接： | ISOLATED |
| 配置： | SINGLE | 二极管元件材料： | SILICON |
| 二极管类型： | ZENER DIODE | 最大动态阻抗： | 7 Ω |
| JEDEC-95代码： | DO-204AA | JESD-30 代码： | O-LALF-W2 |
| JESD-609代码： | e0 | 湿度敏感等级： | 1 |
| 元件数量： | 1 | 端子数量： | 2 |
| 最高工作温度： | 175 °C | 最低工作温度： | -65 °C |
| 封装主体材料： | GLASS | 封装形状： | ROUND |
| 封装形式： | LONG FORM | 峰值回流温度（摄氏度）： | NOT SPECIFIED |
| 极性： | UNIDIRECTIONAL | 最大功率耗散： | 0.417 W |
| 认证状态： | Not Qualified | 标称参考电压： | 6.2 V |
| 最大反向电流： | 0.1 µA | 子类别： | Voltage Reference Diodes |
| 表面贴装： | NO | 技术： | ZENER |
| 端子面层： | TIN LEAD | 端子形式： | WIRE |
| 端子位置： | AXIAL | 处于峰值回流温度下的最长时间： | NOT SPECIFIED |
| 电压温度Coeff-Max： | 3.038 mV/°C | 最大电压容差： | 2% |
| 工作测试电流： | 20 mA | Base Number Matches： | 1 |
1N753C 数据手册
通过下载1N753C数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载1N746 thru 1N759A, -1 and
1N4370 thru 1N4372A, -1 DO-35
Silicon 500 mW Zener Diodes
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
DO-35
The popular 1N746 thru 1N759A and 1N4370 thru 1N4372A series of 0.5
watt Zener Voltage Regulators provides a selection from 2.4 to 12 volts in
standard 5% or 10% tolerances as well as tighter tolerances identified by
different suffix letters on the part number. These glass axial-leaded DO-35
Zeners are also available with an internal-metallurgical-bond option by
adding a “-1” suffix. These are also available in JAN, JANTX, and JANTXV
(DO-204AH)
military qualifications.
Microsemi also offers numerous other Zener
products to meet higher and lower power applications.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
• JEDEC registered 1N746 thru 1N759A and 1N4370
•
Regulates voltage over a broad operating
current and temperature range
Selection from 2.4 to 12 V
Standard voltage tolerances are plus/minus 5%
with A suffix identification and 10 % with no suffix
Tight tolerances available in plus or minus 2%
or 1% with C or D suffix respectively
Flexible axial-lead mounting terminals
thru 1N4372A series
• Internal metallurgical bond option available by adding
•
•
a “-1” suffix
• Also available in JAN, JANTX, and JANTXV
qualifications per MIL-PRF-19500/127 by adding the
JAN, JANTX, or JANTXV prefixes to part numbers for
desired level of screening as well as –1” suffix; (e.g.
JANTX1N751A-1, JANTXV1N758C-1, etc.)
•
•
•
• Military Surface Mount equivalents also available in
DO-213AA by adding a UR-1 suffix in addition to the
JAN, JANTX, and JANTXV prefix; e.g.
Nonsensitive to ESD per MIL-STD-750 Method
1020
•
•
Minimal capacitance (see Figure 3)
JANTX1N962BUR-1 (see separate data sheet)
Inherently radiation hard as described in Microsemi
• Commercial Surface Mount equivalents available as
MLL746 to MLL759A and MLL4370 to MLL4372A
including the “-1” suffix in the DO-213AA MELF style
package (consult factory for others)
MicroNote 050
• DO-7 glass body axial-leaded Zener equivalents are
also available
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
• Operating and Storage temperature: -65ºC to +175ºC
•
•
•
CASE: Hermetically sealed axial-lead glass
• Thermal Resistance: 250 ºC/W junction to lead at 3/8
(10 mm) lead length from body, or 310ºC/W junction to
ambient when mounted on FR4 PC board (1 oz Cu)
with 4 mm2 copper pads and track width 1 mm, length
25 mm
DO-35 (DO-204AH) package
TERMINALS: Leads, tin-lead plated solderable per
MIL-STD-750, method 2026
POLARITY: Cathode indicated by band. Diode to
be operated with the banded end positive with
respect to the opposite end for Zener regulation
• Steady-State Power: 0.5 watts at TL < 50oC 3/8 inch
(10 mm) from body or 0.48 W at TA < 25ºC when
mounted on FR4 PC board as described for thermal
resistance above (also see Figure1)
•
•
MARKING: Part number
TAPE & REEL option: Standard per EIA-296 (add
“TR” suffix to part number)
• Forward voltage @200 mA: 1.1 volts
•
•
WEIGHT: 0.2 grams
See package dimensions on last page
• Solder Temperatures: 260 ºC for 10 s (max)
Copyright 2003
10-31-2003 REV B
Microsemi
Page 1
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
1N746 thru 1N759A, -1 and
1N4370 thru 1N4372A, -1 DO-35
Silicon 500 mW Zener Diodes
S C O T T S D A L E D I V I S I O N
ELECTRICAL CHARACTERISTICS* @ 25oC
NOMINAL
ZENER
MAXIMUM
MAXIMUM REVERSE
CURRENT IR
MAXIMUM
ZENER
TYPICAL
TEMP COEFF.
OF ZENER
VOLTAGE
ZENER
TEST
ZENER
JEDEC
VOLTAGE
VZ @ IZT
(NOTE 2)
CURRENT
IZT
IMPEDANCE
ZZT @ IZT
(NOTE 3)
CURRENT
IZM
TYPE NO.
@ VR = 1 VOLT
α
(NOTE1)
(NOTE 4)
@25ºC
µA
@+150ºC
µA
VZ
VOLTS
2.4
mA
20
OHMS
30
mA
150
135
120
%/oC
-.085
-.080
-.075
1N4370
1N4371
1N4372
100
75
200
2.7
20
30
150
3.0
20
29
50
100
1N746
1N747
1N748
1N749
1N750
1N751
1N752
1N753
1N754
1N755
1N756
1N757
1N758
1N759
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10.0
12.0
20
20
20
20
20
20
20
20
20
20
20
20
20
20
28
24
23
22
19
17
11
7
10
10
10
2
30
30
30
30
30
20
20
20
20
20
20
20
20
20
110
100
95
85
75
70
65
60
55
50
45
40
35
30
-.066
-.058
-.046
-.033
2
-.015
1
+/-.010
+.030
+.049
+.053
+.057
+.060
+.061
+.062
+.062
1
.1
.1
.1
.1
.1
.1
.1
5
6
8
10
17
30
* JEDEC Registered Data
NOTE 1: Standard tolerance on JEDEC types shown is +/- 10%. Suffix letter A denotes +/- 5% tolerance; suffix
letter C denotes +/- 2%; and suffix letter D denotes +/- 1% tolerance.
NOTE 2: Voltage measurements to be performed 20 seconds after application of dc test current.
NOTE 3: Zener impedance derived by superimposing on IZT, a 60 cps, rms ac current equal to 10% IZT (2mA ac). See MicroNote 202 for
typical zener Impedance variation with different operating currents.
NOTE 4: Allowance has been made for the increase in VZ due to ZZ and for the increase in junction temperature as the unit approaches
thermal equilibrium at the power dissipation of 400 mW.
GRAPHS
TL – LEAD TEMPERATURE (oC) 3/8” FROM BODY or
TA on FR4 PC BOARD
NOMINAL ZENER VOLTAGE (VOLTS)
FIGURE 1
FIGURE 2
POWER DERATING CURVE
ZENER VOLTAGE TEMPERATURE
COEFFICIENT vs. ZENER VOLTAGE
Copyright 2003
10-31-2003 REV B
Microsemi
Page 2
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
1N746 thru 1N759A, -1 and
1N4370 thru 1N4372A, -1 DO-35
Silicon 500 mW Zener Diodes
S C O T T S D A L E D I V I S I O N
PACKAGE DIMENSIONS
All dimensions in: INCH
mm
FIGURE 3
CAPACITANCE vs. ZENER VOLTAGE
(TYPICAL)
Copyright 2003
10-31-2003 REV B
Microsemi
Page 3
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
1N753C 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| 1N753C-1 | MICROSEMI | SILICON 400 mW ZENER DIODES | 获取价格 |
|
| 1N753C-1E3 | MICROSEMI | Zener Diode, 6.2V V(Z), 2%, 0.4W, Silicon, Unidirectional, DO-204AH, ROHS COMPLIANT, HERMETIC SEALED, GLASS, DO-35, 2 PIN | 获取价格 |
|
| 1N753C-1TR | MICROSEMI | Zener Diode, 6.2V V(Z), 2%, 0.48W, Silicon, Unidirectional, DO-204AH, HERMETIC SEALED, GLASS, DO-35, 2 PIN | 获取价格 |
|
| 1N753C-PBF | DIGITRON | Zener Diode | 获取价格 |
|
| 1N753C-T | MCC | Zener Diode, | 获取价格 |
|
| 1N753CD7 | MICROSEMI | Zener Diode, 6.2V V(Z), 2%, 0.4W, Silicon, Unidirectional | 获取价格 |
|
| 1N753CRL | MOTOROLA | Zener Diode, 6.2V V(Z), 2%, 0.5W, Silicon, Unidirectional, DO-204AH, HERMETIC SEALED, GLASS, DO-35, 2 PIN | 获取价格 |
|
| 1N753CRL2 | ONSEMI | ZENER DIODE,SINGLE, TWO TERMINAL,6.2V V(Z),2%,DO-35 | 获取价格 |
|
| 1N753CRL2 | MOTOROLA | 6.2V, 0.5W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-204AH, HERMETIC SEALED, GLASS, DO-35, 2 PIN | 获取价格 |
|
| 1N753CTA | ONSEMI | ZENER DIODE,SINGLE, TWO TERMINAL,6.2V V(Z),2%,DO-35 | 获取价格 |
|
1N753C 相关文章
Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
- 2024-09-20
- 6
Bourns 精密环境传感器产品选型手册(英文版)
- 2024-09-20
- 9
Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
- 2024-09-20
- 8
Bourns GMOV 混合过压保护组件产品选型手册(英文版)
- 2024-09-20
- 6
