7P008FLA232C15 [MICROSEMI]
Flash Card, 4MX16, 150ns, CARD-68;型号: | 7P008FLA232C15 |
厂家: | Microsemi |
描述: | Flash Card, 4MX16, 150ns, CARD-68 |
文件: | 总14页 (文件大小:184K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PCMCIA Flash Memory Card
FLA Series
White Electronic Designs
PCMCIA Flash Memory Card
1 MEGABYTE through 40 MEGABYTE (Intel/Sharp based)
ARCHITECTURE OVERVIEW
FEATURES
WEDC’s FLA series is designed to support from 2 to 20,
4Mb, 8Mb or 16Mb components, providing a wide range
of density options. Cards are based on the 28F008SA
(8Mb) for 12V VPP applications or on the 28F004S5
(4Mb), 28F008S5 (8Mb) and 28F016S5 (16Mb) devices
for 5V only applications. Devices codes for the 28F004S5,
28F008SA, 28F008S5 and the 28F016S5 are: A7H,
A2H, A6H and AAh respectively. Systems should be
able to recognize all four codes. Cards utilizing the 8Mb
components provide densities ranging from 2MB to 20MB
in 2MB increments, cards utilizing 16Mb components
provide densities ranging from 4MB to 40MB in 4MB
increments. 4 Mbit memory devices are used only for
smallest capacity cards (1MB).
ꢀ
Low cost High Density Linear Flash Card
Supports 5V only systems or 5V systems with
12V VPP
ꢀ
ꢀ
ꢀ
Based on Intel/Sharp FlashFile Components
Fast Read Performance
- 150ns or 200ns Maximum Access Time
x8 / x16 Data Interface
ꢀ
ꢀ
High Performance Random Writes
- 8µs Typical Word Write Time
ꢀ
Automated Write and Erase Algorithms
- Command User Interface
In support of the PC Card 95 standard for word wide
access devices are paired. Therefore, the Flash array is
structured in 64K word (128kBytes) blocks. Write, read
and block erase operations can be performed as either
a word or byte wide operation . By multiplexing A0, CE1#
and CE2,# 8-bit hosts can access all data on data lines
DQ0-DQ7.
ꢀ
ꢀ
ꢀ
100,000 Erase Cycles per Block
64K word symmetrical Block Architecture
PC Card Standard Type I Form Factor
GENERAL DESCRIPTION
WEDC’s FLASeries Flash memory cards offer high density
linear Flash solid state storage solutions for code and data
storage, high performance disk emulation and execute
in place (XIP) applications in mobile PC and dedicated
(embedded) equipment.
The FLA21-FLA36 series also supports the following
PCMCIAcompatible register functions: Soft Reset via the
Configuration Option Register, Power Down (sleep mode)
via the Configuration and Status Register and monitoring
of Ready/Busy, Soft Reset and Power Down via the Card
Status Register (cards without attribute memory and
versions FLA51 - FLA66 do not have registers).
FLA series cards conform to PCMCIA international
standard.
The card’s control logic provides the system interface
and controls the internal Flash memories. Card can be
read/written in byte-wide or word-wide mode which allows
for flexible integration into various systems. Combined
with file management software, such as Flash Translation
Layer (FTL), FLA Flash cards provide removable high-
performance disk emulation.
The FLAseries cards conform with the PC Card Standard
(PCMCIA) and JEIDA, providing electrical and physical
compatibility. The PC Card form factor offers an industry
standard pinout and mechanical outline, allowing density
upgrades without system design changes.
WEDC’s standard cards are shipped with WEDC’s Logo.
Cards are also available with blank housings (no Logo).
The blank housings are available in both a recessed
(for label) and flat housing. Please contact WEDC
sales representative for further information on Custom
artwork.
The FLA series offers low power modes controlled by
registers. Standard cards contain separate 2kB EEPROM
memory for Card Information Structure (CIS) which can be
used for easy identification of card characteristics.
The WEDC FLA series is based on Intel/Sharp Flash
memories.
Note: Standard options include attribute memory. Cards without attribute memory are
available. Cards are also available with or without a hardware write protect switch.
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2007
Rev. 6
1
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
PCMCIA Flash Memory Card
FLA Series
White Electronic Designs
BLOCK DIAGRAM
Device Pair (N/2 - 1)
CSn
Device (N-1)
Device (N-2)
Array
Address
Bus
ADDRESS
BUFFER
ADDRESS BUS
A1-A25
Control
Address
Bus
M Res
WE#
OE#
WL#
RL#
WH#
RH#
Control Logic
PCMCIA Interface
CE2#
CE1#
Cn
C0
CSn
Device Pair 1
REG#
A0
WP
Device 2
Device 0
Device 3
Device 1
CS1
CS0
At/Reg enable
Ctrl
SR Clr
Reg C;r
/SR
/PD
CS0
Device Pair 0
Card
Management
Registers
4000h
0000h
VCC
RL#
WL#
RH#
WH#
DATA
BUS
Q8-Q15
DATA
BUS
Q0-Q7
VCC
attrib. mem
CIS
EEPROM 2kB
control
Q0-Q7
VCC
I/O buffer
DATA
BUS
D0-D7
DATA
BUS
D8-D15
Device type
28F004S5
28F008SA
28F008S5
28F016S5
Manuf ID
89H
Device ID
A7H
89H
A2H
89H
A6H
89H
AAH
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2007
Rev. 6
2
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
PCMCIA Flash Memory Card
FLA Series
White Electronic Designs
REGISTERS IN ATTRIBUTE MEMORY SPACE*
CSR
CONFIGURATION STATUS REGISTER: ADRS =
4002H WRITE ONLY
ADDRESS
4100h
REGISTER NAME
Status Register
4002h
4000h
Config. and Status Register
Configuration Option Register
Not Supported
PDwn Not Supported
D7
D6
D5
D4
D3
D2
D1
D0
*Cards without Att. Mem and FLA51- FLA66 do not have
registers
D2
Power Down, active High
1 = Place all memory devices in power down mode
0 = Normal Operation Power On
default = 0
COR
CONFIGURATION OPTION REGISTER: ADRS =
4000H WRITE ONLY
SR
SRES
D7
LREQ
D6
Configuration Index
STATUS REGISTER: ADRS = 4100H
READ ONLY
D5
D4
D3
D2
D1
D0
D7
Soft Reset, active High
1 = Reset State
Not Supported SReset
PDwn Not Supported R/BSY
D7
D6
D5
D4
D3
D2
D1
D0
D5
Represents the state of SRESET bit in COR (4000h)
1 = Reset
0 = End Reset State
Level Req (not supported)
D6
0 = Normal Operation
D5-D0 Configuration index (not supported)
Power On default D5 = 0
D3
Represents the state of Power Down bit (D2) in CSR
(4002h)
1 = Power Down
D0
by
Reflects the card's Ready/Busy signal (pin 16) driven
memory components Ready/
Busy outputs. This bit allows
card's Ready/Busy status.
software polling of the
1 = Ready
MECHANICAL
Interconnect area
1.6mm + 0.05
(0.063”)
3.0mm MIN
10.0mm MIN
(0.400”)
1.0mm + 0.05
(0.039”)
Substrate area
54.0mm + 0.10
(2.126”)
85.6mm + 0.20
(3.370”)
1.0mm + 0.05
(0.039”)
10.0mm MIN
(0.400”)
3.3mm + T1 (0.130”)
T1=0.10mm unterconnect area
T1=0.20mm substrate area
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2007
Rev. 6
3
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
PCMCIA Flash Memory Card
FLA Series
White Electronic Designs
PINOUT
Pin
1
Signal name
GND
DQ3
DQ4
DQ5
DQ6
DQ7
CE1#
A10
I/O
Function
Ground
Active
Pin
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
Signal name
GND
CD1#
DQ11#
DQ12
DQ13
DQ14
DQ15
CE2
I/O
Function
Ground
Active
2
I/O
Data bit 3
O
I/O
I/O
I/O
I/O
I
Card Detect 1
LOW
3
I/O
Data bit 4
Data bit 11
4
I/O
Data bit 5
Data bit 12
I/O
Data bit 6
5
6
Data bit 13
I/O
Data bit 7
Data bit 14
7
I
I
Card enable 1
Address bit 10
Output enable
Address bit 11
Address bit 9
Address bit 8
Address bit 13
Address bit 14
Write Enable
Ready/Busy
Supply Voltage
Prog. Voltage
Address bit 16
Address bit 15
Address bit 12
Address bit 7
Address bit 6
Address bit 5
Address bit 4
Address bit 3
Address bit 2
Address bit 1
Address bit 0
Data bit 0
LOW
LOW
Data bit 15
8
I
Card Enable 2
Voltage Sense 1
Reserved
LOW
NC
9
OE#
A11
I
VS1#
RFU
RFU
A17
O
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
Notes:
I
A9
I
Reserved
A8
I
I
I
I
I
I
Address bit 17
Address bit 18
Address bit 19
Address bit 20
Address bit 21
Supply Voltage
Prog. Voltage
Address bit 22
Address bit 23
Address bit 24
Address bit 25
Voltage Sense 2
Card Reset
A13
I
A18
A14
I
A19
WE#
RDY/BSY#
VCC
VPP1
A16
LOW
I
O
A20
2MB(3)
4MB(3)
LOW (4)
A21
VCC
NC
VPP2
A22
NC
I
I
I
8MB(3)
16MB(3)
32MB(3)
64MB(3)
NC
A15
I
A23
A12
I
A24
I
A7
I
A25
I
A6
I
VS2
O
I
A5
I
RST
Wait
RFU#
REG
BVD2#
BVD1
DQ8
HIGH (4)
Low(2,4)
A4
I
I
O
Extended Bus cycle
Reserved
A3
A2
I
I
Attrib Mem Select
Bat. Volt. Detect 2
Bat. Volt. Detect 1
Data bit 8
A1
I
(2)
(2)
O
O
A0
I
DQ0
DQ1
DQ2
WP
I/O
I/O
I/O
O
I/O
I/O
O
Data bit 1
Data bit 2
DQ9
Data bit 9
DQ10
CD2
Data bit 10
Write Potect
Ground
HIGH
O
Card Detect 2
Ground
LOW
GND
GND#
1. RDY/BSY signal is an “Open drain” type output, pull-up resistor on host side is required.
2. Wait#, BVD1 and BVD2 are driven high for compatibility.
3. Shows density for which specified address bit is MSB. Higher order address bits are no connects
(ie 4MB A21 is MSB A22 - A25 are NC).
4. NC - No Connection for FLA51 - FLA66.
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2007
Rev. 6
4
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
PCMCIA Flash Memory Card
FLA Series
White Electronic Designs
CARD SIGNAL DESCRIPTION
Symbol
Type
Name and Function
A0 - A25
INPUT
ADDRESS INPUTS: A0 through A25 enable direct addressing of up to 64MB of memory on the card. Signal A0 is not
used in word access mode. A25 is the most significant bit
DQ0 - DQ15 INPUT/OUTPUT DATA INPUT/OUTPUT: DQ0 THROUGH DQ15 constitute the bi-directional databus. DQ15 is the MSB.
CE1#, CE2#
INPUT
CARD ENABLE 1 AND 2: CE1# enables even byte accesses, CE2# enables odd byte accesses. Multiplexing A0, CE1#
and CE2# allows 8-bit hosts to access all data on DQ0 - DQ7.
OE#
WE#
INPUT
INPUT
OUTPUT ENABLE: Active low signal gating read data from the memory card.
WRITE ENABLE: Active low signal gating write data to the memory card.
RDY/
BSY#(*)
OUTPUT
READY/BUSY OUTPUT: Indicates status of internally timed erase or program algorithms. A high output indicates that
the card is ready to accept accesses. A low output indicates that one or more devices in the memory card are busy with
internally timed erase or write activities.
CD1#, CD2#
WP
OUTPUT
OUTPUT
CARD DETECT 1 and 2: Provide card insertion detection. These signals are internally connected to ground on the card.
The host shall monitor these signals to detect card insertion (pulled-up on host side).
WRITE PROTECT: Write protect reflects the status of the Write Protect switch on the memory card. WP set to high =
write protected, providing internal hardware write lockout to the Flash array.If card does not include optional write protect
switch, this signal will be pulled low internally indicating write protect = “off”.
VPP1, VPP2
VCC
N.C.
PROGRAM/ERASE POWER SUPPLY: Provides programming voltages for card (12V). Not connected for 5V only card.
CARD POWER SUPPLY: (5.0V).
CARD GROUND
GND
REG#
INPUT
INPUT
ATTRIBUTE MEMORY SELECT : Active low signal, enables access to Attribute Memory Plane, occupied by Card
Information Structure and Card Registers.
RST(*)
RESET: Active high signal for placing card in Power-on default state. Reset can be used as a Power-Down signal for the
memory array.
WAIT#(*)
BVD1, BVD2
VS1, VS2
RFU
OUTPUT
OUTPUT
OUTPUT
WAIT: This signal is pulled high internally for compatibility. No wait states are generated.
BATTERY VOLTAGE DETECT: These signals are pulled high to maintain SRAM card compatibility.
VOLTAGE SENSE: Notifies the host socket of the card’s VCC requirements. VS1 and VS2 are open to indicate a 5V card .
RESERVED FOR FUTURE USE
NC
NO INTERNAL CONNECTION TO CARD: pin may be driven or left floating
(*) Signals not supported by FLA51-66 (N.C)
FUNCTIONAL TRUTH TABLE
READ function
Function Mode
Common Memory
Attribute Memory
D15-D8
CE2#
H
CE1#
H
A0
X
L
OE#
X
WE#
X
REG#
X
D15-D8
D7-D0
REG#
D7-D0
Standby Mode
Byte Access (8 bits)
High-Z
High-Z
X
L
L
L
L
High-Z
High-Z
H
L
L
H
H
High-Z
High-Z
Even-Byte
Odd-Byte
Even-Byte
High-Z
High-Z
High-Z
Even-Byte
Not Valid
Even-Byte
High-Z
H
L
H
X
X
L
H
H
Word Access (16 bits)
Odd-Byte Only Access
WRITE function
L
L
L
H
H
Odd-Byte
Odd-Byte
Not Valid
Not Valid
L
H
L
H
H
Standby Mode
H
H
H
L
H
L
X
L
X
H
H
H
H
X
L
L
L
L
X
H
H
H
H
X
X
X
L
L
L
L
X
X
X
X
X
X
Byte Access (8 bits)
X
Even-Byte
Odd-Byte
Even-Byte
X
Even-Byte
L
H
X
X
X
X
Even-Byte
X
Word Access (16 bits)
Odd-Byte Only Access
L
Odd-Byte
Odd-Byte
L
H
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2007
Rev. 6
5
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
PCMCIA Flash Memory Card
FLA Series
White Electronic Designs
ABSOLUTE MAXIMUM RATINGS (1)
Operating Temperature TA (ambient)
Commercial
0°C to +60 °C
Industrial
-40°C to +85 °C
Storage Temperature
Commercial
0°C to +60 °C
-40°C to +85 °C
-0.5V to VCC+0.5V
-0.5V to +7.0V
Industrial
Voltage on any pin relative to VSS
VCC supply Voltage relative to VSS
Note:
(1) Stress greater than those listed under “Absolute Maximum ratings” may cause permanent damage to the device.
This is a stress rating only and functional operation at these or any other conditions greater than those
indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
DC CHARACTERISTICS (1)
Symbol
Parameter
Density(Mbytes)
Notes
Typ(3)
Max
Units Test Conditions
ICCR
VCC Read Current
All
35
mA
mA
VCC = VCCmax
tcycle = 150ns,CMOS levels
ICCW
VCC Program Current
All
28F008S5
28F016S5
75
ICCW
IPPW
ICCE
VCC Program Current
VPP Program Current
VCC Erase Current
All
All
28F008SA
Vpp=12V
30
30
mA
mA
mA
µA
All
100
230
ICCS
(CMOS)
VCC Standby Current
2MB
20MB
2MB
20MB
4MB
40MB
2
110
900
600
420
60
VCC = VCCmax
Control Signals = VCC
Reset = VSS, CMOS levels
28F008SA
2
28F008S5
2
28F016S5
380
CMOS Test Conditions: VCC = 5V ± 5%, VIL = VSS ± 0.2V, VIH = VCC ± 0.2V
Notes:
1. All currents are RMS values unless otherwise specified. ICCR, ICCW and ICCE are based on Byte wide operations. For 16 bit operation values are double.
2. Control Signals: CE1#, CE2#, OE#, WE#, REG#.
3. Typical: VCC = 5V, T = +25C.
Symbol
Parameter
Notes
Min
Max
Units
Test Conditions
ILI
Input Leakage Current
1
±20
µA
VCC = VCCMAX
VIN =VCC or VSS
ILO
Output Leakage Current
1
±20
µA
VCC = VCCMAX
VOUT =VCC or VSS
VIL
VIH
Input Low Voltage
Input High Voltage
1
1
1
1
1
0
0.8
VCC+0.5
0.4
V
V
V
V
V
0.7VCC
VOL
VOH
VLKO
Output Low Voltage
IOL = 3.2mA
IOH = -2.0mA
Output High Voltage
VCC-0.4
2.0
VCC
VCC Erase/Program Lock Voltage
Notes:
1. Values are the same for byte and word wide modes for all card densities.
2. Exceptions: Leakage currents on CE1, CE2, OE, REG and WE will be < 500 µA when VIN = GND due to internal pull-up resistors. Leakage currents on RST will be <150µA when
VIN=VCC due to internal pull-down resistor.
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2007
Rev. 6
6
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
PCMCIA Flash Memory Card
FLA Series
White Electronic Designs
AC CHARACTERISTICS - READ TIMING PARAMETERS
SYMBOL (PCMCIA)
Parameter
150ns
Min
Max
Unit
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
tC(R)
tA(A)
Read Cycle Time
Address Access Time
150
150
150
75
20
0
tA(CE)
tA(OE)
tSU(A)
Card Enable Access Time
Output Enable Access Time
Address Setup Time
tSU(CE)
tH(A)
Card Enable Setup Time
Address Hold Time
20
20
0
tH(CE)
tV(A)
Card Enable Hold Time
Output Hold from Address Change
Output Disable Time from CE#
Output Disable Time from OE#
Output Enable Time from CE#
Output Enable Time from OE#
Power Down recovery to Output Delay. VCC = 5V
tDIS(CE)
tDIS(OE)
tEN(CE)
tEN(OE)
tREC(RSR)
75
75
5
5
500
Note: AC timing diagrams and characteristics are guaranteed to meet or exceed PCMCIA 2.1 specifications.
READ TIMING DIAGRAM
tC(R)
tH(A)
tA(A)
A[25::0], REG#
tV
(A)
tA(CE)
tSU(CE)
CE1#, CE2#
NOTE 1
NOTE 1
tH(CE)
tA(OE)
tSU(A)
tDIS(CE)
OE#
tEN(OE)
tDIS(OE)
D[15::0]
DATA VALID
Note: Signal may be high or low in this area.
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2007
Rev. 6
7
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
PCMCIA Flash Memory Card
FLA Series
White Electronic Designs
AC CHARACTERISTICS - WRITE TIMING PARAMETERS
150ns
SYMBOL (PCMCIA)
Parameter
Unit
Min
150
80
Max
tCW
tW(WE)
Write Cycle Time
Write Pulse Width
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
tSU(A)
Address Setup Time
20
tSU(A-WEH)
tSU(CE-WEH)
tSU(D-WEH)
tH(D)
Address Setup Time for WE#
Card Enable Setup Time for WE#
Data Setup Time for WE#
Data Hold Time
100
100
50
20
tREC(WE)
tDIS(WE)
tDIS(OE)
Write Recover Time
20
Output Disable Time from WE#
Output Disable Time from OE#
Output Enable Time from WE#
Output Enable Time from OE#
Output Enable Setup from WE#
Output Enable Hold from WE#
Card Enable Setup Time from OE#
75
75
tEN(WE)
5
5
tEN(OE)
tSU(OE-WE)
tH(OE-WE)
tSU(CE)
10
10
0
Note: AC timing diagrams and characteristics are guaranteed to meet or exceed PCMCIA 2.1 specifications.
WRITE TIMING DIAGRAM
tC(W)
A[25::0], REG#
t
SU(A-WEH)
SU(CE-WEH)
SU(CE)
t
REC(WE)
t
H(CE)
t
t
CE1#, CE2#
NOTE 1
NOTE 1
OE#
WE#
tH(OE-WE)
t
SU(A)
tW(WE)
tH(D)
t
SU(OE-WE)
tSU(D-WEH)
NOTE 2
D[15::0](DIN
)
DATA INPUT
tDIS(WE)
tEN(OE)
tDIS(OE)
tEN(WE)
NOTE 2
D[15::0](DOUT
)
Note:
1.
2.
Signal may be high or low in this area.
When the data I/O pins are in the output state, no signals shall be applied to the data pins (D15-D0) by the host system.
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2007
Rev. 6
8
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
PCMCIA Flash Memory Card
FLA Series
White Electronic Designs
DATA WRITE AND ERASE PERFORMANCE (1,3)
VCC = 5V ± 5%, TA = 0C TO + 70C
Symbol
tWHQV1
tEHQV1
Parameter
Word/Byte Program time
Notes
4
Min
Typ(1)
8
Max
Units
µs
tWHQV2
tEHQV2
Block Program Time
Block Erase Time
device SA
device S5
device SA
0.6
0.5
1.6
2.1
10
sec
0.4
sec
Notes:
1. Typical: Nominal voltages and TA = 25C.
2. Excludes system overhead.
3. Valid for all speed options.
4. To maximize system performance RDY/BSY# signal should be polled.
PRODUCT MARKING
EDI
WED 7P016FLA6200C15 C995 9915
COMPANY NAME
PART NUMBER
LOT CODE/TRACE NUMBER
DATE CODE
Note:
Some products are currently marked with our pre-merger company name/acronym (EDI). During our
transition period, some products will also be marked with our new company name/acronym (WED).
Starting October 2000 all PCMCIA products will be marked only with the WED prefix.
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2007
Rev. 6
9
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
PCMCIA Flash Memory Card
FLA Series
White Electronic Designs
PART NUMBERING
7 P 016 FLA62 00 C 15
CARD TECHNOLOGY
7
8
FLASH
SRAM
PC CARD
P
R
Standard PCMCIA
Ruggedized PCMCIA
CARD CAPACITY
016
16MB
CARD FAMILY AND VERSION
- See Card Family and Version Info. for details (next page)
PACKAGING OPTION
00
Standard, type 1
TEMPERATURE RANGE
C
I
=
=
Commercial
Industrial -40°C to +85°C
0°C to +70°C
CARD ACCESS TIME
15
25
150ns
250ns
FLA30 With Attribute Memory, no Write Protect
FLA31 No Attribute Memory, with Write Protect
FLA32 With Attribute Memory, with Write Protect
Example P/N 7P004FLA3000C15
CARD FAMILY AND VERSION
INFORMATION
FLA21-FLA24
for programming and erase functions)
FLA21 No Attribute Memory, no Write Protect
Based on 28F008SA (requires 12V VPP
FLA33-FLA36
Based on 28F004S5 for 5V only
applications
FLA22 With Attribute Memory, no Write Protect
FLA23 No Attribute Memory, with Write Protect
FLA24 With Attribute Memory, with Write Protect
FLA33 No Attribute Memory, no Write Protect
FLA34 With Attribute Memory, no Write Protect
FLA35 No Attribute Memory, with Write Protect
Example P/N
7P004FLA2200C15
FLA36
With Attribute Memory, with Write Protect
7P004FLA3600C15
Example P/N
FLA25-FLA28
Based on 28F008S5 for 5V only
applications
FLA25 No Attribute Memory, no Write Protect
FLA26 With Attribute Memory, no Write Protect
FLA27 No Attribute Memory, with Write Protect
FLA28 With Attribute Memory, with Write Protect
FLA51-FLA54
Based on 28F008SA; the same as
FLA21-FLA24 with exception:
- no registers
- signals RST, RDY/BSY, Wait are not connected
FLA51 No Attribute Memory, no Write
FLA52 With Attribute Memory, no Write
FLA53 No Attribute Memory, with Write
Example P/N
7P004FLA2600C15
Protect
Protect
FLA29-FLA32
Based on 28F016S5 for 5V only
applications
FLA29 No Attribute Memory, no Write Protect
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2007
Rev. 6
10
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
PCMCIA Flash Memory Card
FLA Series
White Electronic Designs
Protect
FLA60 With Attribute Memory, no Write
FLA61 No Attribute Memory, with Write
FLA62 With Attribute Memory, with
Protect
FLA54 With Attribute Memory, with Write Protect
Example P/N
7P004FLA5200C15
Protect
FLA55-FLA58
Based on 28F008S5; the same as FLA25-
FLA28 with exception:
Write Protect
- no registers
Example P/N
7P004FLA6000C15
- signals RST, RDY/BSY, Wait are not connected
FLA55 No Attribute Memory, no Write Protect
FLA56 With Attribute Memory, no Write Protect
FLA57 No Attribute Memory, with Write Protect
FLA58 With Attribute Memory, with Write Protect
FLA63-FLA66
Based on 28F004S5; the same as FLA33-
FLA36 with exception:
- no registers
- signals RST, RDY/BSY, Wait are not connected
Example P/N
7P004FLA5600C15
FLA63 No Attribute Memory, no Write
FLA59-FLA62 Based on 28F016S5; the same as FLA29-
Protect
Protect
FLA32 with exception:
- no registers
FLA64 With Attribute Memory, no Write
FLA65 No Attribute Memory, with Write Protect
FLA66 With Attribute Memory, with Write Protect
- signals RST, RDY/BSY, Wait are not connected
FLA59 No Attribute Memory, no Write
Protect
Example P/N
7P004FLA6600C15
ORDERING INFORMATION
7P XXX FLAYY SS T ZZ
XXX
0021)
004
2MB
0181)
4MB
0242)
8MB
0322)
12MB
0402)
16MB
18MB
020
20MB
28MB
36MB
0061)
008
6MB
24MB
0282)
32MB
0362)
40MB
0101)
012
0141)
016
10MB
14MB
1)
2)
Available only for FLA21-FLA24, FLA25-FLA28, FLA51-FLA54, and FLA55-FLA59
Available only for FLA29-FLA32 and FLA59-FLA62
FLAYY
SS
Card Family and Version (See Card Family and Version Information)
00
01
02
WEDC Logo Silkscreen
Blank Housing, Type I
Blank Housing, Type I Recessed
T
C
=
Commercial
0°C to +70°C
I**
=
Industrial -40°C to +85°C
ZZ
15
150ns
Notes: Options without attribute memory and with hardware write protect switch are available.
** Denotes advanced information.
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2007
Rev. 6
11
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
PCMCIA Flash Memory Card
FLA Series
White Electronic Designs
CIS INFORMATION FOR FLA SERIES CARDS
ADDRESS
VALUE
DESCRIPTION
ADDRESS
00H
VALUE
01H
DESCRIPTION
44H
49H
I
CISTPL_DEVICE
46H
37H
7
P
0
x
02H
03H
TPL_LINK
48H
50H
04H
53H
FLASH = 150ns (device writable)
4AH
30H
06H
06H
0EH
16H
1EH
26H
2EH
36H
3EH
46H
4EH
5EH
6EH
7EH
8EH
9EH
CARD SIZE: 2MB
4MB
4CH
4EH
6MB
8MB
x
50H
46H
4CH
41H
F
L
A
10MB
12MB
14MB
16MB
18MB
20MB
24MB
28MB
32MB
36MB
40MB
52H
54H
56H
58H
32H
32H
2
2
based on 28F008SA
with Att. Mem. no WP
32H
36H
2
6
based on 28F008S5
with Att. Mem. no WP
33H
30H
3
0
based on 28F016S5
with Att. Mem. no WP
5AH
5CH
5EH
60H
62H
64H
66H
68H
6AH
6CH
6EH
70H
72H
74H
76H
78H
7AH
66H
68H
6AH
6CH
6EH
70H
72H
74H
76H
78H
7AH
7CH
7EH
80H
82H
84H
2DH
2DH
2DH
31H
35H
20H
00H
43H
4FH
50H
59H
52H
49H
47H
48H
54H
20H
00H
43H
4FH
50H
59H
52H
49H
47H
48H
54H
20H
45H
4CH
45H
43H
54H
-
08H
0AH
0CH
0EH
10H
FFH
18H
02H
89H
END OF DEVICE
CISTPL_JEDEC_C
TPL_LINK
-
-
1
INTEL - ID
5
A2H
A6H
AAH
INTEL
INTEL
INTEL
28F008SA - ID
28F008S5 - ID
28F016S5 - ID
SPACE
END TEXT
C
12H
14H
16H
18H
1AH
1CH
1EH
20H
22H
24H
26H
28H
2AH
17H
03H
42H
01H
FFH
1EH
06H
02H
11H
01H
01H
01H
01H
CISTPL_DEVICE_A
TPL_LINK
O
P
EEPROM - 200ns
Device Size = 2KBytes
END OF TUPLE
CISTPL_DEVICEGEO
TPL_LINK
Y
R
I
G
H
DGTPL_BUS
T
DGTPL_EBS
SPACE
DGTPL_RBS
END TEXT
DGTPL_WBS
C
DGTPL_PART
O
FLASH DEVICE
NON-INTERLEAVED
P
2CH
2EH
30H
32H
34H
36H
38H
3AH
3CH
3EH
40H
42H
20H
04H
F6H
01H
00H
00H
15H
47H
05H
00H
45H
44H
CISTPL_MANFID
TPL_LINK(04H)
Y
R
EDI TPLMID_MANF: LSB
EDI TPLMID_MANF: MSB
LSB: Number Not Assigned
MSB: Number Not Assigned
CISTPL_VERS1
I
G
H
T
SPACE
TPL_LINK
E
L
TPLLV1_MAJOR
TPLLV1_MINOR
E
C
T
E
D
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2007
Rev. 6
12
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
PCMCIA Flash Memory Card
FLA Series
White Electronic Designs
CIS INFORMATION FOR FLA SERIES CARDS (CONT.)
ADDRESS
86H
VALUE
52H
4FH
4EH
49H
43H
20H
44H
45H
53H
49H
47H
4EH
53H
20H
49H
4EH
43H
4FH
52H
50H
4FH
52H
41H
54H
45H
44H
20H
00H
31H
39H
39H
37H
00H
FFH
1AH
05H
01H
00H
00H
40H
03H
00H
FFH
00H
DESCRIPTION
R
88H
O
8AH
8CH
8EH
90H
N
I
C
SPACE
92H
D
94H
E
96H
S
98H
I
9AH
9CH
9EH
A0H
A2H
A4H
A6H
A8H
AAH
ACH
AEH
B0H
B2H
B4H
B6H
B8H
BAH
BCH
BEH
C0H
C2H
C4H
C6H
C8H
CAH
CCH
CEH
D0H
D2H
D4H
D6H
D8H
DAH
DCH
G
N
S
SPACE
I
N
C
O
R
P
O
R
A
T
E
D
SPACE
END TEXT
1
9
9
7
END TEXT
END OF LIST
CISTPL_CONF
TPL_LINK
TPCC_SZ
TPCC_LAST
TPCC_RADR
TPCC_RADR
TPCC_RMSK
NULL CONTROL TUPLE
CISTPL_END
INVALID ADDRESS
The shaded area (addresses BEH C0H C2H C4H) can be different. It represents the
year of introducing the version of the card.
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2007
Rev. 6
13
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
PCMCIA Flash Memory Card
FLA Series
White Electronic Designs
Document Title
PCMCIA Flash Memory Card FLA Series
Revision History
Rev #
History
Release Date Status
Rev 0
Rev 6
Initial Release
April 2007
July 2007
Final
Final
1.0 Update absolute maximum ratings commercial
temperature to 0°C to +60 °C from 30°C to +80 °C
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2007
Rev. 6
14
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
相关型号:
©2020 ICPDF网 联系我们和版权申明