AVSMBJ16AE3 [MICROSEMI]
Trans Voltage Suppressor Diode, 600W, 16V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AA, ROHS COMPLIANT, PLASTIC PACKAGE-2;型号: | AVSMBJ16AE3 |
厂家: | Microsemi |
描述: | Trans Voltage Suppressor Diode, 600W, 16V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AA, ROHS COMPLIANT, PLASTIC PACKAGE-2 |
文件: | 总3页 (文件大小:116K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AVSMBJ5.0A thru AVSMBJ170A, CA e3 and
AVSMBG5.0A thru AVSMBG170A, CA, e3
SURFACE MOUNT 600 Watt
Transient Voltage Suppressor
S C O T T S D A L E D I V I S I O N
DESCRIPTION
PACKAGE
This AVSMBJ5.0A-170A or AVSMBG5.0A-170A series of surface mount 600 W Transient
Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components from
destruction or degradation. It is available in J-bend design (AVSMBJ) with the DO-214AA
package for greater PC board mounting density or in a Gull-wing design (AVSMBG) in the
DO-215AA for visible solder connections.
It is available in both unidirectional and
bidirectional configurations with an A or CA suffix part number as well as RoHS Compliant
designated by an “e3”suffix. Their clamping response time is virtually instantaneous. As a
result, they can be used for protection from ESD or EFT per IEC61000-4-2 and IEC61000-
4-4, or for inductive switching environments and induced RF protection. They can also
protect from secondary lightning effects per IEC61000-4-5 and class levels defined herein.
Microsemi also offers numerous other TVS products to meet higher and lower power
demands and special applications.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
Compliant to IEC61000-4-2 and IEC61000-4-4 for ESD
and EFT protection respectively
Selections for 5.0 to 170 volts standoff voltages (VWM)
100% screened as follows for avionics applications:
1. Temperature Cycle (thermal shock) 20 Cycles -55°C to 125°C
2. Solder Capability: Stress Tested at 260°C for 10 sec.
3. Surge 1 pulse at 110% Ipp (Both Directions for Bidirectional)
4. Surge 1 pulse at 100% Ipp (Both Directions for Bidirectional)
5. Electrical Test
Secondary lightning protection per IEC61000-4-5 with 42
Ohms source impedance:
Class 1: AVSMB 5.0 to AVSMB 120A or CA
Class 2: AVSMB 5.0 to AVSMB 60A or CA
Class 3: AVSMB 5.0 to AVSMB 30A or CA
Class 4: AVSMB 5.0 to AVSMB 15A or CA
6. Burn-in (HTRB) 48 hrs 125°C Polarity A for Bidirectional (96 hrs
for Unidirectional)
Secondary lightning protection per IEC61000-4-5 with 12
Ohms source impedance:
7. Electrical Test Delta ID and V(BR) Polarity A
Class 1: AVSMB 5.0 to AVSMB 36A or CA
Class 2: AVSMB 5.0 to AVSMB 18A or CA
8. Burn-in (HTRB) 48 hrs 125°C Polarity B for bidirectional (not
required for Unidirectional)
Compliant to RTCA/DO-160E Waveform 4, Levels 1 & 2
9. Electrical Test Delta ID and V(BR) Polarity B (Not required for
Unidirectional)
Compliant to RTCA/DO-160E Waveform 4, Level 3 for
AVSMB5.0 to AVSMB20A or CA
10. Electrical Test GO-NO-GO
Compliant to RTCA/DO-160E Waveform 4, Level 4 for
AVSMB5.0 to AVSMB7.5
RoHS Compliant devices available and designated by
adding an “e3” suffix
Economical surface mount design in both J-bend or Gull-wing
terminations.
Compliant to RTCA/DO-160E Waveform 5A, Level 1
Compliant to RTCA/DO-160E Waveform 5A, Level 2 for
AVSMB5.0 to AVSMB6.0A or CA
Protects sensitive components such as IC’s, CMOS, Bipolar,
BiCMOS, ECL, DTL, T2L, etc.
Protection from switching transients & induced RF
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
2-Stage: Robust, High Reliability Lead Frame
Peak Pulse Power dissipation at 25ºC: 600 watts at 10/1000 μs
(also see Fig 1,2, and 3)
CASE: Void-free transfer molded thermosetting epoxy
body meeting UL94V-0
Impulse repetition rate (duty factor): 0.01%
tclamping (0 volts to V(BR) min.): < 100 ps theoretical for
unidirectional and < 5 ns for bidirectional
TERMINALS: Gull-wing or C-bend (modified J-bend)
leads Tin-Lead or RoHS compliant annealed matte-Tin
plating solderable per MIL-STD-750, method 2026
Operating and Storage temperature: -65ºC to +150ºC
Thermal resistance: 25 ºC/W junction to lead or 90ºC/W junction
to ambient when mounted on FR4 PC board (1oz Cu) with
recommended footprint (see last page)
Steady-State Power dissipation: 5 watts at TL = 25oC, or 1.38
watts at TA = 25ºC when mounted on FR4 PC board with
recommended footprint
POLARITY: Cathode indicated by band. No band on bi-
directional devices.
MARKING: See Page 2 marking column.
TAPE & REEL option: Standard per EIA-481-1-A with 12
mm tape, 750 per 7 inch reel or 2500 per 13 inch reel.
WEIGHT: 0.1 grams
Forward Surge at 25ºC: 100 amps peak impulse of 8.3 ms half-
sine wave (unidirectional only)
See package dimension on last page
Solder temperatures: 260 ºC for 10 s (maximum)
Copyright 2008
1-29-2008 REV D; AVSMB5-170
Microsemi
Page 1
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
AVSMBJ5.0A thru AVSMBJ170A, CA e3 and
AVSMBG5.0A thru AVSMBG170A, CA, e3
SURFACE MOUNT 600 Watt
Transient Voltage Suppressor
S C O T T S D A L E D I V I S I O N
ELECTRICAL CHARACTERISTICS @ 25oC UNLESS OTHER WISE SPECIFIED
REVERSE
STANDOFF
VOLTAGE
VWM
BREAKDOWN
VOLTAGE
VBR @ I(BR)
MAXIMUM
CLAMPING
VOLTAGE
@ IPP
PEAK PULSE MAXIMUM
MICROSEMI PART NUMBER
CURRENT
(See Fig. 2)
IPP
STANDBY
CURRENT
ID @ VWM
Volts
Gull-Wing
Lead
Modified “J”
Bend Lead
Marking
MIN.
I(BR)
mA
Volts
5.0
6.0
7.5
10
Volts
9.2
Amps
65.2
58.3
46.5
35.3
33.0
30.2
23.1
21.7
18.5
8.6
A
100
500
100
1
AVSMBG5.0A
AVSMBJ5.0A
AVSMBJ6.0A
AVSMBJ7.5A
AVSMBJ10A
AVSMBJ11A
AVSMBJ12A
AVSMBJ16A
AVSMBJ17A
AVSMBJ20A
AVSMBJ43A
AVSMBJ45A
AVSMBJ48A
AVSMBJ170A
AV5.0A
AV6.0A
AV7.5A
AV10A
AV11A
AV12A
AV16A
AV17A
AV20A
AV43A
AV45A
AV48A
AV170A
6.40
6.67
8.33
11.1
12.2
13.3
17.8
18.9
22.2
47.8
50.0
53.3
189
10
AVSMBG6.0A
AVSMBG7.5A
AVSMBG10A
AVSMBG11A
AVSMBG12A
AVSMBG16A
AVSMBG17A
AVSMBG20A
AVSMBG43A
AVSMBG45A
AVSMBG48A
AVSMBG170A
10
1
1
1
1
1
1
1
1
1
1
1
10.3
12.9
17.0
18.2
19.9
26.0
27.6
32.4
69.4
72.7
77.4
275
11
.5
12
.5
16
.5
17
.5
20
.5
43
.5
45
8.3
.5
48
7.7
.5
170
2.2
.5
“FOR OTHER VOLTAGES CONTACT THE FACTORY”
Bidirectional device types are indicated by a CA suffix after the part number. (e.g.: AVSMBG170CA).
Bidirectional capacitance is half that shown in figure 4 at zero volts.
Microsemi Corp’s AVSMB series (600 W) surface mountable packages are designed specifically for transient voltage suppression. The
wide leads assure a large surface contact for good heat dissipation, and a low resistance path for surge current flow to ground. These
high speed transient voltage suppressors can be used to effectively protect sensitive components such as integrated circuits and MOS
devices.
SYMBOLS & DEFINITIONS
Symbol
VWM
PPP
Definition
Working Peak (Standoff) Voltage
Peak Pulse Power
Symbol
Definition
Peak Pulse Current
Clamping Voltage
IPP
VC
V(BR)
ID
Breakdown Voltage
Standby Current
I(BR)
Breakdown Current for V(BR)
Copyright 2008
1-29-2008 REV D; AVSMB5-170
Microsemi
Page 2
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
AVSMBJ5.0A thru AVSMBJ170A, CA e3 and
AVSMBG5.0A thru AVSMBG170A, CA, e3
SURFACE MOUNT 600 Watt
Transient Voltage Suppressor
S C O T T S D A L E D I V I S I O N
GRAPHS
50
30
TC = 25oC
10
5.0
3.0
2.0
1.0
0.5
0.3
0.2
0.1
0.1 0.2
0.5 1.0 2.0
5.0 10
20
50 100 200
1000
10,000
Test waveform parameters: tr=10 s, tw=1000 s
FIGURE 2
tw – Pulse Width - s
FIGURE 1
Peak Pulse Power vs. Pulse Time
Pulse Waveform for
Exponential Surge
PAD LAYOUT
SMBJ
INCHES
.260
.085
mm
6.60
2.16
2.79
A
B
C
.110
SMBG
INCHES
0.320
0.085
mm
8.13
2.16
2.79
TL Lead Temperature oC
V(BR) - Breakdown Voltage – Volts
FIGURE 4
Typical Capacitance vs Breakdown Voltage
A
B
C
FIGURE 3 - Derating Curve
0.110
PACKAGE DIMENSIONS
A
B
C
D
E
F
K
L
MIN
MAX
.077 .160
.083 .180
.130 .205 .077
.155 .220 .104
.235
.255
.015
.030
.030
.060
DIMENSIONS IN MILLIMETERS
MIN
MAX
1.96 4.06
2.10 4.57
3.30 5.21 1.95
3.94 5.59 2.65
5.97
6.48
.381
.762
.760
1.520
Copyright 2008
1-29-2008 REV D; AVSMB5-170
Microsemi
Page 3
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明