首页 |元器件品牌

JAN1N5640A [MICROSEMI]

1500 WATT UNIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR; 1500 WATT单向瞬态电压抑制器
JAN1N5640A
型号： JAN1N5640A
厂家： Microsemi    Microsemi
描述：

1500 WATT UNIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR
1500 WATT单向瞬态电压抑制器

瞬态抑制器 二极管 局域网
文件： 总4页 (文件大小：198K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
1N5629 thru 1N5665A  
1500 WATT UNIDIRECTIONAL  
TRANSIENT VOLTAGE SUPPRESSOR  
S C O T T S D A L E D I V I S I O N  
DESCRIPTION  
APPEARANCE  
This popular Transient Voltage Suppressor (TVS) series for 1N5629 thru  
1N5665A are JEDEC registered selections for unidirectional devices. All  
have the same high Peak Pulse Power rating of 1500 W with extremely fast  
response times. They are also available in military qualified selections as  
described in the Features section herein. They are most often used for  
protecting against transients from inductive switching environments,  
induced RF effects, or induced secondary lightning effects as found in  
lower surge levels of IEC61000-4-5. They are also very successful in  
protecting airborne avionics and electrical systems. Since their response  
time is virtually instantaneous, they can also protect from ESD and EFT per  
IEC61000-4-2 and IEC61000-4-4.  
DO-13  
(DO-202AA)  
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com  
FEATURES  
APPLICATIONS / BENEFITS  
•
•
Unidirectional TVS series for thru-hole mounting  
• Protection from switching transients and induced RF  
• ESD & EFT protection per IEC 61000-4-2 and -4-4  
Suppresses transients up to 1500 watts @ 10/1000 µs  
(see Figure 1)  
• Secondary lightning protection per IEC61000-4-5 with  
•
•
•
•
Clamps transient in less than 100 pico seconds  
Working voltage (VWM) range 5 V to 171 V  
Hermetic sealed DO-13 metal package  
JAN/TX/TXV military qualifications also available for  
the tighter tolerance “A” suffix devices per MIL-PRF-  
19500/500 by adding the JAN, JANTX, or JANTXV  
prefix, e.g. JANTXV1N5629A, etc.  
For bidirectional TVS in the same DO-13 package,  
see separate data sheet for the 1N6036 – 1N6072A  
series (also military qualified)  
Surface mount equivalent packages also available as  
SMCJ5.0 - SMCJ170CA or SMCG5.0 – SMCG170CA  
in separate data sheet (consult factory for other  
surface mount options)  
42 Ohms source impedance:  
Class 1: 1N5629 to 1N5665A  
Class 2: 1N5629 to 1N5663A  
Class 3: 1N5629 to 1N5655A  
Class 4: 1N5629 to 1N5648A  
• Secondary lightning protection per IEC61000-4-5 with  
12 Ohms source impedance:  
•
•
Class 1 : 1N5629 to 1N5658A  
Class 2: 1N5629 to 1N5651A  
Class 3: 1N5629 to 1N5643A  
Class 4: 1N5629 to 1N5636A  
• Secondary lightning protection per IEC61000-4-5 with  
2 Ohms source impedance:  
Class 2: 1N5629 to 1N5642A  
•
Plastic axial-leaded equivalents available in the  
Class 3: 1N5629 to 1N5635A  
1N6267 – 1N6303A series in separate data sheet  
• Inherently radiation hard per Microsemi MicroNote 050  
MAXIMUM RATINGS  
MECHANICAL AND PACKAGING  
• 1500 Watts for 10/1000 µs with repetition rate of 0.01% or  
•
•
CASE: DO-13 (DO-202AA), welded, hermetically  
less* at lead temperature (TL) 25oC (See Figs. 1, 2, & 4)  
sealed metal and glass  
• Operating & Storage Temperatures: -65o to +175oC  
FINISH: All external metal surfaces are Tin-Lead  
plated and solderable per MIL-STD-750 method  
2026  
• THERMAL RESISTANCE: 50oC/W junction to lead at  
0.375 inches (10 mm) from body or 110 oC/W junction to  
ambient when mounted on FR4 PC board with 4 mm2  
copper pads (1 oz) and track width 1 mm, length 25 mm  
•
POLARITY: Cathode connected to case and polarity  
indicated by diode symbol  
• DC Power Dissipation*: 1 Watt at TL < +125oC 3/8” (10  
•
•
•
MARKING: Part number and polarity diode symbol  
WEIGHT: 1.4 grams. (Approx)  
mm) from body (see derating in Fig 3 and note below)  
• Forward surge current: 200 Amps for 8.3ms half-sine  
TAPE & REEL option: Standard per EIA-296 (add  
wave at TA = +25oC  
“TR” suffix to part number)  
• Solder Temperatures: 260 o C for 10 s (maximum)  
•
See package dimension on last page  
* TVS devices are not typically used for dc power dissipation and are instead operated at or less than their rated standoff voltage  
(VWM) except for transients that briefly drive the device into avalanche breakdown (VBR to VC region).  
Copyright 2002  
Microsemi  
Page 1  
11-06-2003 REV A  
Scottsdale Division  
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503  
1N5629 thru 1N5665A  
1500 WATT UNIDIRECTIONAL  
TRANSIENT VOLTAGE SUPPRESSOR  
S C O T T S D A L E D I V I S I O N  
o
ELECTRICAL CHARACTERISTICS @ TA = 25 C  
Breakdown  
Breakdown  
Current  
I(BR)  
Rated  
Standoff  
Voltage  
VWM  
Maximum  
Standby  
Current  
Maximum  
Clamping  
Voltage  
Maximum  
Peak  
Maximum  
Temperature  
Voltage  
JEDEC  
Type  
No.*  
Pulse  
Current  
IPP  
V(BR) @ I(BR)  
Coefficient of V(BR)  
ID @ VWM  
VC @ IPP  
α
V(BR)  
Min.  
V
Max.  
V
mA  
10  
10  
10  
10  
10  
10  
1
V
V
A
%/oC  
.057  
.057  
.061  
.061  
.065  
.065  
.068  
.068  
.073  
.073  
.075  
.075  
.078  
.078  
.081  
.081  
.084  
.084  
.086  
.086  
.088  
.088  
.090  
.090  
.092  
.092  
.094  
.094  
.096  
.096  
.097  
.097  
.098  
.098  
.099  
.099  
.100  
.100  
.101  
.101  
.101  
.101  
.102  
.102  
.103  
.103  
.104  
.104  
.104  
.104  
.105  
.105  
.105  
.105  
.106  
.106  
.106  
.106  
.107  
.107  
.107  
.107  
.107  
.107  
µA  
1000  
1000  
500  
500  
200  
200  
50  
50  
10  
10  
5
1N5629  
1N5629A  
1N5630  
1N5630A  
1N5631  
1N5631A  
1N5632  
1N5632A  
1N5633  
1N5633A  
1N5634  
1N5634A  
1N5635  
1N5635A  
1N5636  
1N5636A  
1N5637  
1N5637A  
1N5638  
1N5638A  
1N5639  
1N5639A  
1N5640  
1N5640A  
1N5641  
1N5641A  
1N5642  
1N5642A  
1N5643  
1N5643A  
1N5644  
1N5644A  
1N5645  
1N5645A  
1N5646  
1N5646A  
1N5647  
1N5647A  
1N5648  
1N5648A  
1N5649  
1N5649A  
1N5650  
1N5650A  
1N5651  
1N5651A  
1N5652  
1N5652A  
1N5653  
1N5653A  
1N5654  
1N5654A  
1N5655  
1N5655A  
1N5656  
1N5656A  
1N5657  
1N5657A  
1N5658  
1N5658A  
1N5659  
1N5659A  
1N5660  
1N5660A  
6.12  
6.45  
6.75  
7.13  
7.38  
7.79  
8.19  
8.65  
9.00  
9.5  
7.48  
7.14  
8.25  
7.88  
9.02  
8.61  
10.0  
9.55  
11.0  
10.5  
12.1  
11.6  
13.2  
12.6  
14.3  
13.7  
16.5  
15.8  
17.6  
16.8  
19.8  
18.9  
22.0  
21.0  
24.2  
23.1  
26.4  
25.2  
29.7  
28.4  
33.0  
31.5  
36.3  
34.7  
39.6  
37.8  
42.9  
41.0  
47.3  
45.2  
51.7  
49.4  
56.1  
53.6  
61.6  
58.8  
68.2  
65.1  
74.8  
71.4  
82.5  
78.8  
90.2  
86.1  
100.0  
95.5  
110  
5.50  
5.80  
6.05  
6.40  
6.63  
7.02  
7.37  
7.78  
8.10  
8.55  
8.92  
9.40  
9.72  
10.2  
10.5  
11.1  
12.1  
12.8  
12.9  
13.6  
14.5  
15.3  
16.2  
17.1  
17.8  
18.8  
19.4  
20.5  
21.8  
23.1  
24.3  
25.6  
26.8  
28.2  
29.1  
30.8  
31.6  
33.3  
34.8  
36.8  
38.1  
40.2  
41.3  
43.6  
45.4  
47.8  
50.2  
53.0  
55.1  
58.1  
60.7  
64.1  
66.4  
70.1  
73.7  
77.8  
81.0  
85.5  
89.2  
94.0  
97.2  
102  
10.8  
10.5  
11.7  
11.3  
12.5  
12.1  
13.8  
13.4  
15.0  
14.5  
16.2  
15.6  
17.3  
16.7  
19.0  
18.2  
22.0  
21.2  
23.5  
22.5  
26.5  
25.2  
29.1  
27.7  
31.9  
30.6  
34.7  
33.2  
39.1  
37.5  
43.5  
41.4  
47.7  
45.7  
52.0  
49.9  
56.4  
53.9  
61.9  
59.3  
67.8  
64.8  
73.5  
70.1  
80.5  
77.0  
89.0  
85.0  
98.0  
92.0  
108  
139  
143  
128  
132  
120  
124  
109  
112  
100  
103  
93  
1
1
1
9.9  
1
10.5  
10.8  
11.4  
11.7  
12.4  
13.5  
14.3  
14.4  
15.2  
16.2  
17.1  
18.0  
19.0  
19.8  
20.9  
21.6  
22.8  
24.3  
25.7  
27.0  
28.5  
29.7  
31.4  
32.4  
34.2  
35.1  
37.1  
38.7  
40.9  
42.3  
44.7  
45.9  
48.5  
50.4  
53.2  
55.8  
58.9  
61.2  
64.6  
67.5  
71.3  
73.8  
77.9  
81.9  
86.5  
90  
1
5
96  
1
5
87  
1
5
90  
1
5
79  
1
5
82  
1
5
68  
1
5
71  
1
5
64  
1
5
67  
1
5
56.5  
59.5  
51.5  
54  
1
5
1
5
1
5
1
5
47  
1
5
49  
1
5
43  
1
5
45  
1
5
38.5  
40  
1
5
1
5
34.5  
36  
1
5
1
5
31.5  
33  
1
5
1
5
29  
1
5
30  
1
5
26.5  
28  
1
5
1
5
24  
1
5
25.3  
22.2  
23.2  
20.4  
21.4  
18.6  
19.5  
16.9  
17.7  
15.3  
16.3  
13.9  
14.6  
12.7  
13.3  
11.4  
12.0  
10.4  
11.0  
9.5  
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
103  
1
5
118  
1
5
113  
1
5
131  
1
5
125  
1
5
144  
95  
105  
1
5
137  
99  
121  
1
5
158  
105  
116  
1
5
152  
9.9  
108  
132  
1
5
173  
8.7  
114  
126  
1
5
165  
9.1  
117  
143  
1
105  
5
187  
8.0  
124  
137  
1
111  
5
179  
8.4  
Copyright 2002  
Microsemi  
Page 2  
11-06-2003 REV A  
Scottsdale Division  
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503  
1N5629 thru 1N5665A  
1500 WATT UNIDIRECTIONAL  
TRANSIENT VOLTAGE SUPPRESSOR  
S C O T T S D A L E D I V I S I O N  
Breakdown  
Breakdown  
Current  
I(BR)  
Rated  
Maximum  
Standby  
Current  
Maximum  
Clamping  
Voltage  
Maximum  
Peak  
Maximum  
Temperature  
Voltage  
Standoff  
Voltage  
VWM  
JEDEC  
Type  
No.*  
Pulse  
Current  
IPP  
V
(BR) @ I(BR)  
Coefficient of V(BR)  
ID @ VWM  
VC @ IPP  
α
V(BR)  
Min.  
V
Max.  
V
mA  
1
V
V
A
%/oC  
.108  
.108  
.108  
.108  
.108  
.108  
.108  
.108  
.108  
.108  
µA  
5
1N5661  
1N5661A  
1N5662  
1N5662A  
1N5663  
1N5663A  
1N5664  
1N5664A  
1N5665  
1N5665A  
135  
143  
144  
152  
153  
162  
162  
171  
180  
190  
165  
158  
176  
168  
187  
179  
198  
189  
220  
210  
121  
128  
130  
136  
138  
145  
146  
154  
162  
171  
215  
207  
230  
219  
244  
234  
258  
246  
287  
274  
7.0  
7.2  
6.5  
6.8  
6.2  
6.4  
5.8  
6.1  
5.2  
5.5  
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
* No suffix = 10% tolerance, suffix A = 5% tolerance. Suffix A also available in military qualified types with a JAN, JANTX, or JANTXV prefix.  
NOTES:  
V
is measured after I  
has been applied for < 300ms.  
(BR)  
(BR)  
Forward voltage VF at 100 amps peak 8.3 ms is 3.5 volts max.  
SYMBOLS & DEFINITIONS  
Symbol  
VWM  
Definition  
Standoff Voltage: Applied Reverse Voltage to assure a nonconductive condition. (See Note 1.)  
V(BR)  
Breakdown Voltage: This is the Breakdown Voltage the device will exhibit at 25oC  
Maximum Clamping Voltage: The maximum peak voltage appearing across the TVS when subjected to the  
peak pulse current in a one millisecond time interval. The peak pulse voltage is the combination of voltage rise  
VC  
due to both the series resistance and thermal rise and positive temperature coefficient (α  
Peak Pulse Current: The peak current during the impulse (See Figure 2)  
)
V(BR)  
IPP  
PPP  
ID  
Peak Pulse Power: The pulse power as determined by the product of VC and IPP  
Standby Current: The current at the standoff voltage (VWM  
)
I(BR)  
Breakdown Current: The current used for measuring Breakdown Voltage (V(BR))  
NOTE 1: A TVS is normally selected according to the rated “Standoff Voltage” VWM that should be equal to or greater than the dc or  
continuous peak operating voltage level.  
GRAPHS  
100  
Exponential wave-form  
(See FIG. 2)  
10  
Pulse time duration (tp) is  
defined as that point where  
Peak Value  
IPP  
Square-wave pulse  
I
P decays to 50% of peak  
value (IPP).  
1.0  
0.1Kw  
100ns  
1µs  
10µs  
100µs  
1ms  
10ms  
time (t) in milliseconds  
Pulse Time (tp)  
FIG. 2 Pulse wave form for exponential surge  
FIG. 1 – Non-repetive peak pulse power rating curve  
NOTE: Peak power defined as peak voltage times peak current  
Copyright 2002  
11-06-2003 REV A  
Microsemi  
Page 3  
Scottsdale Division  
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503  
1N5629 thru 1N5665A  
1500 WATT UNIDIRECTIONAL  
TRANSIENT VOLTAGE SUPPRESSOR  
S C O T T S D A L E D I V I S I O N  
TL – lead Temperature oC  
FIG. 3 Steady-state power derating curve  
TA Ambient Temperature oC  
FIG. 4 Derating Curve  
PACKAGE DIMENSIONS  
DIM  
INCHES  
MILLIMETERS  
MIN  
MAX  
.235  
.350  
--  
MIN  
--  
MAX  
5.97  
8.890  
--  
A
B
C
D
E
F
--  
.315  
1.250  
1.250  
--  
8.001  
31.750  
31.750  
--  
--  
--  
.210  
.090  
.035  
5.334  
2.286  
.889  
--  
--  
G
.026  
.660  
DO-13  
(DO-202AA)  
Copyright 2002  
Microsemi  
Page 4  
11-06-2003 REV A  
Scottsdale Division  
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明