JAN1N758BURTR-1

更新时间:2024-10-29 07:17:29
品牌:MICROSEMI
描述:SILICON 400 mW ZENER DIODES

JAN1N758BURTR-1 概述

SILICON 400 mW ZENER DIODES SILICON 400毫瓦齐纳二极管

JAN1N758BURTR-1 数据手册

通过下载JAN1N758BURTR-1数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
1N746 thru 1N759A, -1 and  
1N4370 thru 1N4372A, -1 DO-35  
Silicon 500 mW Zener Diodes  
S C O T T S D A L E D I V I S I O N  
DESCRIPTION  
APPEARANCE  
DO-35  
The popular 1N746 thru 1N759A and 1N4370 thru 1N4372A series of 0.5  
watt Zener Voltage Regulators provides a selection from 2.4 to 12 volts in  
standard 5% or 10% tolerances as well as tighter tolerances identified by  
different suffix letters on the part number. These glass axial-leaded DO-35  
Zeners are also available with an internal-metallurgical-bond option by  
adding a “-1” suffix. These are also available in JAN, JANTX, and JANTXV  
(DO-204AH)  
military qualifications.  
Microsemi also offers numerous other Zener  
products to meet higher and lower power applications.  
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com  
FEATURES  
APPLICATIONS / BENEFITS  
JEDEC registered 1N746 thru 1N759A and 1N4370  
Regulates voltage over a broad operating  
current and temperature range  
Selection from 2.4 to 12 V  
Standard voltage tolerances are plus/minus 5%  
with A suffix identification and 10 % with no suffix  
Tight tolerances available in plus or minus 2%  
or 1% with C or D suffix respectively  
Flexible axial-lead mounting terminals  
thru 1N4372A series  
Internal metallurgical bond option available by adding  
a “-1” suffix  
Also available in JAN, JANTX, and JANTXV  
qualifications per MIL-PRF-19500/127 by adding the  
JAN, JANTX, or JANTXV prefixes to part numbers for  
desired level of screening as well as –1” suffix; (e.g.  
JANTX1N751A-1, JANTXV1N758C-1, etc.)  
Military Surface Mount equivalents also available in  
DO-213AA by adding a UR-1 suffix in addition to the  
JAN, JANTX, and JANTXV prefix; e.g.  
Nonsensitive to ESD per MIL-STD-750 Method  
1020  
Minimal capacitance (see Figure 3)  
JANTX1N962BUR-1 (see separate data sheet)  
Inherently radiation hard as described in Microsemi  
Commercial Surface Mount equivalents available as  
MLL746 to MLL759A and MLL4370 to MLL4372A  
including the “-1” suffix in the DO-213AA MELF style  
package (consult factory for others)  
MicroNote 050  
DO-7 glass body axial-leaded Zener equivalents are  
also available  
MAXIMUM RATINGS  
MECHANICAL AND PACKAGING  
Operating and Storage temperature: -65ºC to +175ºC  
CASE: Hermetically sealed axial-lead glass  
Thermal Resistance: 250 ºC/W junction to lead at 3/8  
(10 mm) lead length from body, or 310ºC/W junction to  
ambient when mounted on FR4 PC board (1 oz Cu)  
with 4 mm2 copper pads and track width 1 mm, length  
25 mm  
DO-35 (DO-204AH) package  
TERMINALS: Leads, tin-lead plated solderable per  
MIL-STD-750, method 2026  
POLARITY: Cathode indicated by band. Diode to  
be operated with the banded end positive with  
respect to the opposite end for Zener regulation  
Steady-State Power: 0.5 watts at TL < 50oC 3/8 inch  
(10 mm) from body or 0.48 W at TA < 25ºC when  
mounted on FR4 PC board as described for thermal  
resistance above (also see Figure1)  
MARKING: Part number  
TAPE & REEL option: Standard per EIA-296 (add  
“TR” suffix to part number)  
Forward voltage @200 mA: 1.1 volts  
WEIGHT: 0.2 grams  
See package dimensions on last page  
Solder Temperatures: 260 ºC for 10 s (max)  
Copyright 2003  
10-31-2003 REV B  
Microsemi  
Page 1  
Scottsdale Division  
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503  
1N746 thru 1N759A, -1 and  
1N4370 thru 1N4372A, -1 DO-35  
Silicon 500 mW Zener Diodes  
S C O T T S D A L E D I V I S I O N  
ELECTRICAL CHARACTERISTICS* @ 25oC  
NOMINAL  
ZENER  
MAXIMUM  
MAXIMUM REVERSE  
CURRENT IR  
MAXIMUM  
ZENER  
TYPICAL  
TEMP COEFF.  
OF ZENER  
VOLTAGE  
ZENER  
TEST  
ZENER  
JEDEC  
VOLTAGE  
VZ @ IZT  
(NOTE 2)  
CURRENT  
IZT  
IMPEDANCE  
ZZT @ IZT  
(NOTE 3)  
CURRENT  
IZM  
TYPE NO.  
@ VR = 1 VOLT  
α
(NOTE1)  
(NOTE 4)  
@25ºC  
µA  
@+150ºC  
µA  
VZ  
VOLTS  
2.4  
mA  
20  
OHMS  
30  
mA  
150  
135  
120  
%/oC  
-.085  
-.080  
-.075  
1N4370  
1N4371  
1N4372  
100  
75  
200  
2.7  
20  
30  
150  
3.0  
20  
29  
50  
100  
1N746  
1N747  
1N748  
1N749  
1N750  
1N751  
1N752  
1N753  
1N754  
1N755  
1N756  
1N757  
1N758  
1N759  
3.3  
3.6  
3.9  
4.3  
4.7  
5.1  
5.6  
6.2  
6.8  
7.5  
8.2  
9.1  
10.0  
12.0  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
28  
24  
23  
22  
19  
17  
11  
7
10  
10  
10  
2
30  
30  
30  
30  
30  
20  
20  
20  
20  
20  
20  
20  
20  
20  
110  
100  
95  
85  
75  
70  
65  
60  
55  
50  
45  
40  
35  
30  
-.066  
-.058  
-.046  
-.033  
2
-.015  
1
+/-.010  
+.030  
+.049  
+.053  
+.057  
+.060  
+.061  
+.062  
+.062  
1
.1  
.1  
.1  
.1  
.1  
.1  
.1  
5
6
8
10  
17  
30  
* JEDEC Registered Data  
NOTE 1: Standard tolerance on JEDEC types shown is +/- 10%. Suffix letter A denotes +/- 5% tolerance; suffix  
letter C denotes +/- 2%; and suffix letter D denotes +/- 1% tolerance.  
NOTE 2: Voltage measurements to be performed 20 seconds after application of dc test current.  
NOTE 3: Zener impedance derived by superimposing on IZT, a 60 cps, rms ac current equal to 10% IZT (2mA ac). See MicroNote 202 for  
typical zener Impedance variation with different operating currents.  
NOTE 4: Allowance has been made for the increase in VZ due to ZZ and for the increase in junction temperature as the unit approaches  
thermal equilibrium at the power dissipation of 400 mW.  
GRAPHS  
TL – LEAD TEMPERATURE (oC) 3/8” FROM BODY or  
TA on FR4 PC BOARD  
NOMINAL ZENER VOLTAGE (VOLTS)  
FIGURE 1  
FIGURE 2  
POWER DERATING CURVE  
ZENER VOLTAGE TEMPERATURE  
COEFFICIENT vs. ZENER VOLTAGE  
Copyright 2003  
10-31-2003 REV B  
Microsemi  
Page 2  
Scottsdale Division  
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503  
1N746 thru 1N759A, -1 and  
1N4370 thru 1N4372A, -1 DO-35  
Silicon 500 mW Zener Diodes  
S C O T T S D A L E D I V I S I O N  
PACKAGE DIMENSIONS  
All dimensions in: INCH  
mm  
FIGURE 3  
CAPACITANCE vs. ZENER VOLTAGE  
(TYPICAL)  
Copyright 2003  
10-31-2003 REV B  
Microsemi  
Page 3  
Scottsdale Division  
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503  

JAN1N758BURTR-1 相关器件

型号 制造商 描述 价格 文档
JAN1N758C MICROSEMI SILICON 400 mW ZENER DIODES 获取价格
JAN1N758C-1 MICROSEMI SILICON 400 mW ZENER DIODES 获取价格
JAN1N758CTR MICROSEMI SILICON 400 mW ZENER DIODES 获取价格
JAN1N758CTR-1 MICROSEMI SILICON 400 mW ZENER DIODES 获取价格
JAN1N758CUR MICROSEMI SILICON 400 mW ZENER DIODES 获取价格
JAN1N758CUR-1 MICROSEMI SILICON 400 mW ZENER DIODES 获取价格
JAN1N758CURTR MICROSEMI SILICON 400 mW ZENER DIODES 获取价格
JAN1N758CURTR-1 MICROSEMI SILICON 400 mW ZENER DIODES 获取价格
JAN1N758D MICROSEMI SILICON 400 mW ZENER DIODES 获取价格
JAN1N758D-1 MICROSEMI SILICON 400 mW ZENER DIODES 获取价格

JAN1N758BURTR-1 相关文章

  • HARTING(浩亭)圆形连接器产品选型手册
    2024-10-31
    6
  • HYCON(宏康科技)产品选型手册
    2024-10-31
    6
  • GREEGOO整流二极管和晶闸管产品选型手册
    2024-10-31
    7
  • 西门子豪掷106亿美元,战略收购工程软件巨头Altair
    2024-10-31
    8