MLL822-1%
更新时间:2024-09-18 13:01:56
品牌:MICROSEMI
描述:6.2V, SILICON, VOLTAGE REFERENCE DIODE, DO-213AA, HERMETIC SEALED, GLASS PACKAGE-2
MLL822-1% 概述
6.2V, SILICON, VOLTAGE REFERENCE DIODE, DO-213AA, HERMETIC SEALED, GLASS PACKAGE-2 齐纳二极管
MLL822-1% 规格参数
是否无铅: | 含铅 | 是否Rohs认证: | 不符合 |
生命周期: | Active | 零件包装代码: | DO-213AA |
包装说明: | O-LELF-R2 | 针数: | 2 |
Reach Compliance Code: | unknown | 风险等级: | 5.16 |
外壳连接: | ISOLATED | 配置: | SINGLE |
二极管元件材料: | SILICON | 二极管类型: | ZENER DIODE |
JEDEC-95代码: | DO-213AA | JESD-30 代码: | O-LELF-R2 |
JESD-609代码: | e0 | 湿度敏感等级: | NOT SPECIFIED |
元件数量: | 1 | 端子数量: | 2 |
封装主体材料: | GLASS | 封装形状: | ROUND |
封装形式: | LONG FORM | 峰值回流温度(摄氏度): | NOT SPECIFIED |
最大功率耗散: | 0.5 W | 认证状态: | Not Qualified |
标称参考电压: | 6.2 V | 表面贴装: | YES |
技术: | ZENER | 端子面层: | TIN LEAD |
端子形式: | WRAP AROUND | 端子位置: | END |
处于峰值回流温度下的最长时间: | NOT SPECIFIED | 电压温度Coeff-Max: | 0.62 mV/°C |
最大电压容差: | 4.84% | Base Number Matches: | 1 |
MLL822-1% 数据手册
通过下载MLL822-1%数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载1N821UR thru 1N829AUR-1
(or MLL821 thru MLL829-1)
6.2 & 6.55 Volt Temperature Compensated
Surface Mount Zener Reference Diodes
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
The 1N821UR thru 1N829AUR-1 series of surface mount Zero-TC
Reference Diodes provides a selection of both 6.2 V and 6.55 V nominal
voltages and temperature coefficients to as low as 0.0005%/oC for minimal
voltage change with temperature when operated at 7.5 mA. These glass
surface mount DO-213AA (MELF) reference diodes are optionally available
with an internal-metallurgical-bond by adding a “-1” suffix. This type of
bonded Zener package construction is also available in JAN, JANTX, and
JANTXV military qualifications. Microsemi also offers numerous other
Zener Reference Diode products for a variety of other voltages up to 200 V.
DO-213AA
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
• Surface mount equivalent of JEDEC registered
• Provides minimal voltage changes over a broad
1N821 thru 1N829 series
temperature range
• Internal metallurgical bond option available by adding
• For instrumentation and other circuit designs
a “-1” suffix
requiring a stable voltage reference
• Reference voltage selection of 6.2 V & 6.55 V +/-5%
• Maximum temperature coefficient selections available
with further tight tolerance options at lower voltage
from 0.01%/ºC to 0.0005%/ºC
• 1N821, 823, 825, 827 and 829 also have surface
mount qualification to MIL-PRF-19500/159 by adding
the JAN, JANTX, or JANTXV prefixes to part
numbers a well as the “-1” suffix; e.g. JANTX1N829-
1, etc.
• Axial-leaded equivalents also available in DO-35 or
DO-7 without the UR suffix (see separate data sheet)
including military qualifications up to JANS for DO-7
(see separate data sheet)
• Tight reference voltage tolerances available with
center nominal value of 6.15 V by adding designated
tolerance such as 1%, 2%, 3%, etc. after the part
number for identification
e.g. 1N827UR-2%, 1N829AUR-1-1%, etc.
•
Small surface-mount footprint
• Nonsensitive to ESD per MIL-STD-750 Method 1020
• Typical low capacitance of 100 pF or less
• JANS equivalent available in DO-213AA via SCD
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
•
•
Operating Temperatures: -65oC to +175oC
•
•
•
•
CASE: Hermetically sealed glass case. DO-213AA
Storage Temperatures: -65oC to +175oC
package
DC Power Dissipation: 500 mW @ TL = 25oC and
maximum current IZM of 70 mA. NOTE: For
optimum voltage-temperature stability, IZ = 7.5 mA
(less than 50 mW in dissipated power)
TERMINALS: Leads, tin-lead plated solderable per
MIL-STD-750, Method 2026
MARKING: Cathode band (except double anode
1N822 and 1N824)
•
Solder Temperatures: 260oC for 10 s (max)
POLARITY: Reference diode to be operated with
the banded end positive with respect to the
opposite end
TAPE & REEL option: Standard per EIA-481-B with
12 mm tape, 2000 per 7 inch reel or 5000 oer 13
inch reel (add “TR” suffix to part number)
•
•
•
WEIGHT: 0.04 grams.
See package dimensions on last page
Copyright 2003
Microsemi
Page 1
12-19-2003 REV A
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
1N821UR thru 1N829AUR-1
(or MLL821 thru MLL829-1)
6.2 & 6.55 Volt Temperature Compensated
Surface Mount Zener Reference Diodes
S C O T T S D A L E D I V I S I O N
*ELECTRICAL CHARACTERISTICS @ 25oC, unless otherwise specified
VOLTAGE
MAXIMUM
REVERSE
CURRENT
IR @ 3 V
MAXIMUM
ZENER
EFFECTIVE
TEMPERATURE
COEFFICIENT
TEMPERATURE
STABILITY
ZENER
VOLTAGE
(Note 1 and 4)
VZ @ IZT
ZENER
TEST
JEDEC
IMPEDANCE
(Note 2)
CURRENT
IZT
(∆VZT MAX)
TYPE NUMBER
(Notes 1, 5 & 6)
-55oC to +100oC
(Note 3 and 4)
α
VZ
ZZT @ IZT
VOLTS
5.9 – 6.5
5.9 – 6.5
5.9 – 6.5
5.9 – 6.5
5.9 – 6.5
5.9 – 6.5
5.9 – 6.5
5.9 – 6.5
6.2 – 6.9
5.9 – 6.5
5.9 – 6.5
6.2 – 6.9
5.9 – 6.5
5.9 – 6.5
mA
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
OHMS
15
µA
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
mV
96
96
96
48
48
48
19
19
20
9
%/oC
0.01
1N821UR
1N821AUR
1N822UR †
1N823UR
1N823AUR
1N824UR †
1N825UR
1N825AUR
1N826UR
1N827UR
1N827AUR
1N828UR
1N829UR
1N829AUR
10
0.01
15
0.01
15
0.005
0.005
0.005
0.002
0.002
0.002
0.001
0.001
0.001
0.0005
0.0005
10
15
15
10
15
15
10
9
15
10
5
15
10
5
*JEDEC Registered Data.
†Double Anode; electrical specifications apply under both bias polarities.
NOTES:
1.
Add a “-1” suffix for internal metallurgical bond. When ordering devices with tighter tolerances than specified for the VZ voltage nominal
of 6.15 V, add a further hyphened suffix number % to the part number for desired tolerance, e.g. 1N827UR-1-2%, 1N829UR-1-1%,
1N829AUR-1%, 1N829AUR-1-1%, etc.
2.
3.
Zener impedance is measured by superimposing 0.75 mA ac rms on 7.5 mA dc @ 25oC.
The maximum allowable change observed over the entire temperature range i.e., the diode voltage will not exceed the specified mV
change at any discrete temperature between the established limits.
4.
5.
Voltage measurements to be performed 15 seconds after application of dc current.
1N821UR-1, 1N823UR-1, 1N825UR-1, 1N827UR-1, and 1N829UR-1 also have qualification to MIL-PRF-19500/159 by adding the JAN,
JANTX, or JANTXV prefix to part numbers as well as the “-1” suffix; e.g. JANTX1N827UR-1, JANTXV1N829UR-1, etc.
This product series has also been previously identified as the MLL821 thru MLL829A-1. This alternate name may still be used.
6.
Copyright 2003
Microsemi
Scottsdale Division
Page 2
12-19-2003 REV A
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
1N821UR thru 1N829AUR-1
(or MLL821 thru MLL829-1)
6.2 & 6.55 Volt Temperature Compensated
Surface Mount Zener Reference Diodes
S C O T T S D A L E D I V I S I O N
GRAPHS
I – Operating Current (mA)
I – OpFerIaGtinUgRCEurr2ent (mA)
FIGURE 3
Z
Z
TYPICAL CHANGE OF TEMPERATURE COEFFICIENT
WITH CHANGE IN OPERATING CURRENT.
TYPICAL CHANGE OF ZENER VOLTAGE
WITH CHANGE IN OPERATING CURRENT
The curve shown in Figure 2 is typical of the diode series and greatly simplifies
the estimation of the Temperature Coefficient (TC) when the diode is operated at
currents other than 7.5mA.
EXAMPLE: A diode in this series is operated at a current of 7.5mA and has
specified Temperature Coefficient (TC) limits of +/-0.005%/oC. To obtain the
typical Temperature Coefficient limits for this same diode operated at a current of
6.0mA, the new TC limits (%/oC) can be estimated using the graph in FIGURE 2.
At a test current of 6.0mA the change in Temperature Coefficient (TC) is
approximately –0.0006%.oC. The algebraic sum of +/-0.005%oC and –
0.0006%/oC gives the new estimated limits of +0.0044%/oC and -0.0056%/oC.
This curve in Figure 3 illustrates the change of diode
voltage arising from the effect of impedance. It is in effect
an exploded view of the zener operating region of the I-V
characteristic.
In conjunction with Figure 2, this curve can be used to
estimate total voltage regulation under conditions of both
varying temperature and current.
INCHES
MILLIMETERS
MIN MAX
DIM
A
MIN
MAX
0.067
0.146
0.022
0.063
0.130
0.016
1.60
1.70
3.30
0.41
3.70
0.55
B
PAD LAYOUT
C
INCHES
.200
mm
5.08
1.40
2.03
A
B
C
.055
.080
Copyright 2003
Microsemi
Page 3
12-19-2003 REV A
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
MLL822-1% 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
MLL822-1%E3 | MICROSEMI | 6.2 V, SILICON, VOLTAGE REFERENCE DIODE, DO-213AA, ROHS COMPLIANT, HERMETIC SEALED, GLASS PACKAGE-2 | 获取价格 | |
MLL822-1%E3TR | MICROSEMI | 6.2 V, SILICON, VOLTAGE REFERENCE DIODE, DO-213AA, ROHS COMPLIANT, HERMETIC SEALED, GLASS PACKAGE-2 | 获取价格 | |
MLL822-1%TR | MICROSEMI | 6.2V, SILICON, VOLTAGE REFERENCE DIODE, DO-213AA, HERMETIC SEALED, GLASS PACKAGE-2 | 获取价格 | |
MLL822-1-1% | MICROSEMI | Zener Diode, 6.2V V(Z), 4.84%, 0.5W, Silicon, DO-213AA, HERMETIC SEALED, GLASS PACKAGE-2 | 获取价格 | |
MLL822-1-1%E3 | MICROSEMI | Zener Diode, 6.2V V(Z), 4.84%, 0.5W, Silicon, DO-213AA, ROHS COMPLIANT, HERMETIC SEALED, GLASS PACKAGE-2 | 获取价格 | |
MLL822-1-1%E3TR | MICROSEMI | Zener Diode, 6.2V V(Z), 4.84%, 0.5W, Silicon, DO-213AA, ROHS COMPLIANT, HERMETIC SEALED, GLASS PACKAGE-2 | 获取价格 | |
MLL822-1-1%TR | MICROSEMI | Zener Diode, 6.2V V(Z), 4.84%, 0.5W, Silicon, DO-213AA, HERMETIC SEALED, GLASS PACKAGE-2 | 获取价格 | |
MLL822-1-2%E3 | MICROSEMI | Zener Diode, 6.2V V(Z), 4.84%, 0.5W, Silicon, DO-213AA, ROHS COMPLIANT, HERMETIC SEALED, GLASS PACKAGE-2 | 获取价格 | |
MLL822-1-2%E3TR | MICROSEMI | Zener Diode, 6.2V V(Z), 4.84%, 0.5W, Silicon, DO-213AA, ROHS COMPLIANT, HERMETIC SEALED, GLASS PACKAGE-2 | 获取价格 | |
MLL822-1-2%TR | MICROSEMI | Zener Diode, 6.2V V(Z), 4.84%, 0.5W, Silicon, DO-213AA, HERMETIC SEALED, GLASS PACKAGE-2 | 获取价格 |
MLL822-1% 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6