MQSMBGP6KE43E3TR [MICROSEMI]
Trans Voltage Suppressor Diode, 600W, 34.8V V(RWM), Unidirectional, 1 Element, Silicon, DO-215AA, ROHS COMPLIANT, PLASTIC, SMBG, 2 PIN;
| 型号： | MQSMBGP6KE43E3TR |
| 厂家： | 
Microsemi |
| 描述： | Trans Voltage Suppressor Diode, 600W, 34.8V V(RWM), Unidirectional, 1 Element, Silicon, DO-215AA, ROHS COMPLIANT, PLASTIC, SMBG, 2 PIN 局域网 光电二极管 |
| 文件： | 总4页 (文件大小：222K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SMBJP6KE6.8 thru SMBJP6KE200CA, e3 and
SMBGP6KE6.8 thru SMBGP6KE200CA, e3
600 Watt TRANSIENT VOLTAGE
SUPPRESSOR
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
This SMBJP6KE and SMBGP6KE series is an economical surface mount version of
the popular P6KE axial-leaded series of 600 W Transient Voltage Suppressors
(TVSs). It is available in both unidirectional and bi-directional configurations for
protecting voltage-sensitive components from destruction or degradation. Response
time of clamping action is virtually instantaneous. As a result, they may also be used
effectively for protection from ESD or EFT per IEC61000-4-2 and IEC61000-4-4 or for
inductive switching environments and induced RF. They can also be used for
protecting other sensitive components from secondary lightning effects per IEC61000-
4-5 and class levels defined herein. Microsemi also offers numerous other TVS
products to meet higher and lower power demands and special applications.
NOTE: All SMB series are
equivalent to prior SMS package
identifications.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
•
Economical TVS series for surface mount
•
Suppresses transients up to 600 watts @ 10/1000
µs (see Figure 1)
Available in both unidirectional and bidirectional
(add C or CA suffix to part number for bidirectional)
•
Protects sensitive components such as IC’s,
CMOS, Bipolar, BiCMOS, ECL, DTL, T2L, etc.
•
•
•
Selections for 6.8 to 200 volts breakdown (VBR
)
•
•
Protection from switching transients & induced RF
Fast response
Compliant to IEC61000-4-2 and IEC61000-4-4 for
ESD and EFT protection respectively
Optional 100% screening for avionics grade is
available by adding MA prefix to part number for added
100% temperature cycle -55oC to +125oC (10X) as well
as surge (3X) and 24 hours HTRB with post test VZ &
IR (in the operating direction for unidirectional or both
directions for bidirectional)
•
•
Secondary lightning protection per IEC61000-4-5
with 42 Ohms source impedance:
Class 1: SMBJ(G)P6KE6.8 to 130A or CA
Class 2: SMBJ(G)P6KE6.8 to 68A or CA
Class 3: SMBJ(G)P6KE6.8 to 36A or CA
Class 4: SMBJ(G)P6KE6.8 to 18A or CA
•
Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, and JANTXV are available by
adding MQ, MX, or MV prefixes respectively to part
numbers.
Secondary lightning protection per IEC61000-4-5
with 12 Ohms source impedance:
•
•
•
Axial-lead (thru-hole) equivalents available as P6KE6.8
to P6KE200CA (consult factory for other options)
Class 1: SMBJ(G)P6KE6.8 to 43A or CA
Class 2: SMBJ(G)P6KE6.8 to 22A or CA
Moisture classification is Level 1 with no dry pack
required per IPC/JEDEC J-STD-020B
RoHS Compliant devices available by adding an “e3”
suffix.
MAXIMUM RATINGS
• Peak Pulse Power dissipation at 25oC: 600 watts at
10/1000 μs (also see Fig 1,2, and 3).
MECHANICAL AND PACKAGING
•
CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
• Impulse repetition rate (duty factor): 0.01%
•
•
FINISH: Tin-Lead plated or RoHS Compliant
annealed matte-tin plating over copper and readily
solderable per MIL-STD-750, method 2026
• tclamping (0 volts to V(BR) min.): < 100 ps theoretical for
unidirectional and < 5 ns for bidirectional
• Operating and Storage temperature: -65oC to +150oC
MARKING: Body marked without SMBJ or SMBG
part number prefix, e.g. P6KE6.8A, P6KE6.8Ae3,
P6KE36, P6KE200CA, P6KE200CAe3, etc.
• Thermal resistance: 25 ºC/W junction to lead, or 90ºC/W
junction to ambient when mounted on FR4 PC board (1oz
Cu) with recommended footprint (see last page)
•
•
POLARITY: Band denotes cathode. Bidirectional
not marked
• Steady-State Power dissipation: 5 watts at TL = 25oC, or
1.38 watts at TA = 25ºC when mounted on FR4 PC board
with recommended footprint
• Forward Voltage at 25oC: 3.5 Volts maximum @ 50 Amp
peak impulse of 8.3 ms half-sine wave (unidirectional
only)
• Solder temperatures: 260oC for 10 s (maximum)
WEIGHT: 0.1 grams (approximate)
•
TAPE & REEL option: Standard per EIA-481-1-A
with 12 mm tape, 750 per 7 inch reel or 2500 per
13 inch reel (add “TR” suffix to part number)
•
See package dimensions on last page
Copyright © 2007
6-21-2007 Rev C
Microsemi
Page 1
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
SMBJP6KE6.8 thru SMBJP6KE200CA, e3 and
SMBGP6KE6.8 thru SMBGP6KE200CA, e3
600 Watt TRANSIENT VOLTAGE
SUPPRESSOR
S C O T T S D A L E D I V I S I O N
ELECTRICAL CHARACTERISTICS
BREAKDOWN VOLTAGE
TEST
CURRENT
RATED
STANDOFF
VOLTAGE
MAX
STANDBY
CURRENT
MAX
CLAMPING
VOLTAGE
PEAK PULSE
CURRENT
TEMPERATURE
COEFFICIANT
of V(BR)
MICROSEMI
PART
NUMBER
(add SMBJ or
SMBG prefix)
V(BR)
Nom.
VDC
I(BR)
mA
VWM
V
5.5
5.8
6.05
6.4
6.63
7.02
7.37
7.78
8.1
8.55
8.92
9.4
I
D @ VWM
V
C @ IPP
V
IPP
A
56
57
51
53
48
50
44
45
40
41
37
38
35
36
32
33
27
28
26
27
23
24
21
22
19
20
17
18
15
16
14
Min.
VDC
Max.
VDC
αV(BR)
% / oC
.057
.057
.061
.061
.065
.065
.068
.068
.073
.073
.075
.075
.078
.078
.081
.081
.084
.084
.086
.086
.088
.088
.090
.090
.092
.092
.094
.094
.096
.096
.097
.097
.098
.098
.099
.099
.100
.100
.101
.101
.101
.101
.102
.102
.103
.103
.104
.104
.104
.104
.105
.105
.105
.105
.106
.106
μA
1000
1000
500
500
200
200
50
50
10
10
5
5
5
5
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
P6KE6.8
P6KE6.8A
P6KE7.5
P6KE7.5A
P6KE8.2
P6KE8.2A
P6KE9.1
P6KE9.1A
P6KE10
P6KE10A
P6KE11
P6KE11A
P6KE12
P6KE12A
P6KE13
P6KE13A
P6KE15
P6KE15A
P6KE16
P6KE16A
P6KE18
P6KE18A
P6KE20
P6KE20A
P6KE22
P6KE22A
P6KE24
P6KE24A
P6KE27
P6KE27A
P6KE30
P6KE30A
P6KE33
P6KE33A
P6KE36
P6KE36A
P6KE39
P6KE39A
P6KE43
P6KE43A
P6KE47
P6KE47A
P6KE51
P6KE51A
P6KE56
P6KE56A
P6KE62
6.12
6.45
6.75
7.13
7.38
7.79
8.19
8.65
9.0
6.8
6.8
7.5
7.5
8.2
8.2
9.1
9.1
10
10
11
11
12
12
13
13
15
15
16
16
18
18
20
20
22
22
24
24
27
27
30
30
33
33
36
36
39
39
43
43
47
47
51
51
56
56
62
62
68
68
75
75
82
82
91
91
7.48
7.14
8.25
7.88
9.02
8.61
10
10
10
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10.8
10.5
11.7
11.3
12.5
12.1
13.8
13.4
15
14.5
16.2
15.6
17.3
16.7
19
9.55
11
9.5
9.9
10.5
12.1
11.6
13.2
12.6
14.3
13.7
16.5
15.8
17.6
16.8
19.8
18.9
22
10.5
10.8
11.4
11.7
12.4
13.5
14.3
14.4
15.2
16.2
17.1
18
9.72
10.2
10.5
11.1
12.1
12.8
12.9
13.6
14.5
15.3
16.2
17.1
17.8
18.8
19.4
20.5
21.8
23.1
24.3
25.6
26.8
28.2
29.1
30.8
31.6
33.3
34.8
36.8
38.1
40.2
41.3
43.6
45.4
47.8
50.2
53
18.2
22
21.2
23.5
22.5
26.5
25.2
29.1
27.7
31.9
30.6
34.7
33.2
39.1
37.5
43.5
41.4
47.7
45.7
52
49.9
56.4
53.9
61.9
59.3
67.8
64.8
73.5
70.1
80.5
77
19
21
19.8
20.9
21.6
22.8
24.3
25.7
27
24.2
23.1
26.4
25.2
29.7
28.4
33
31.5
36.3
34.7
39.6
37.8
42.9
41
47.3
45.2
51.7
49.4
56.1
53.6
61.6
58.8
68.2
65.1
74.8
71.4
82.5
78.8
90.2
86.1
100
28.5
29.7
31.4
32.4
34.2
35.1
37.1
38.7
40.9
42.3
44.7
45.9
48.5
50.4
53.2
55.8
58.9
61.2
64.6
67.5
71.3
73.8
77.9
81.9
86.5
14.4
12.6
13.2
11.6
12
10.6
11.2
9.6
10.1
8.8
9.3
8.2
8.6
7.4
7.8
6.8
7.1
6.1
6.5
5.5
5.8
5.1
5.3
4.5
4.8
89
85
98
92
108
103
118
113
131
125
P6KE62A
P6KE68
P6KE68A
P6KE75
P6KE75A
P6KE82
P6KE82A
P6KE91
55.1
58.1
60.7
64.1
66.4
70.1
73.7
77.8
1
1
1
1
1
1
1
1
P6KE91A
95.5
1
1
Copyright © 2007
6-21-2007 Rev C
Microsemi
Page 2
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
SMBJP6KE6.8 thru SMBJP6KE200CA, e3 and
SMBGP6KE6.8 thru SMBGP6KE200CA, e3
600 Watt TRANSIENT VOLTAGE
SUPPRESSOR
S C O T T S D A L E D I V I S I O N
BREAKDOWN VOLTAGE
V(BR)
TEST
CURRENT
RATED
STANDOFF
VOLTAGE
MAX
STANDBY
CURRENT
MAX
CLAMPING
VOLTAGE
PEAK PULSE
CURRENT
TEMPERATURE
COEFFICIANT
of V(BR)
MICROSEMI
PART
NUMBER
(add SMBJ or
SMBG prefix)
I(BR)
mA
VWM
V
81
85.5
89.2
94
97.2
102
105
111
121
128
130
136
138
145
146
154
162
171
I
D @ VWM
V
C @ IPP
V
IPP
A
Min.
Nom.
Max.
αV(BR)
% / oC
.106
.106
.107
.107
.107
.107
.107
.107
.108
.108
.108
.108
.108
.108
.108
.108
.108
.108
VDC
VDC
VDC
μA
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
P6KE100
P6KE100A
P6KE110
P6KE110A
P6KE120
P6KE120A
P6KE130
P6KE130A
P6KE150
P6KE150A
P6KE160
P6KE160A
P6KE170
P6KE170A
P6KE180
P6KE180A
P6KE200
P6KE200A
90
95
99
100
100
110
110
120
120
130
130
150
150
160
160
170
170
180
180
200
200
110
105
121
116
132
126
143
137
165
158
176
168
187
179
198
189
220
210
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
144
137
158
152
173
165
187
179
215
207
230
219
244
234
258
246
287
274
4.2
4.4
3.8
3.4
3.5
3.6
3.2
3.3
2.8
2.9
2.6
2.7
2.5
2.6
2.3
2.4
2.1
2.2
105
108
114
117
124
135
143
144
152
153
161
162
171
180
190
Consult factory for higher voltages.
For Bidirectional construction, indicate a C or CA suffix after part number, i.e. SMBJP6KE200CA. For RoHS compliant construction, indicate an “e3”
suffix after part number, i.e. SMBJP6KE200CAe3. Capacitance will be one-half that shown in Figure 4.
SYMBOLS & DEFINITIONS
Symbol
VWM
PPP
Definition
Working Peak (Standoff) Voltage
Peak Pulse Power
Symbol
Definition
Peak Pulse Current
IPP
VC
Clamping Voltage
V(BR)
ID
Breakdown Voltage
Standby Current
I(BR)
Breakdown Current for V(BR)
GRAPHS
50
30
20
TC = 25oC
10
7.0
5.0
3.0
2.0
1.0
0.7
0.5
0.3
0.2
0.1
0.1
0.2
0.5
1.0
2.0
5.0
10
20
50
100
200
1000
10,000
Test waveform parmeters: tr=10 μs, tp=1000 μs
tw – Pulse Width - μs
FIGURE 2
FIGURE 1
Peak Pulse Power vs. Pulse Time
Pulse Waveform for
Exponential Surge
Copyright © 2007
6-21-2007 Rev C
Microsemi
Page 3
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
SMBJP6KE6.8 thru SMBJP6KE200CA, e3 and
SMBGP6KE6.8 thru SMBGP6KE200CA, e3
600 Watt TRANSIENT VOLTAGE
SUPPRESSOR
S C O T T S D A L E D I V I S I O N
TL Lead Temperature oC
V(BR) - Breakdown Voltage – Volts
FIGURE 4 – SMBJ(G)P6KE series Typical Capacitance vs.
Breakdown Voltage
FIGURE 3 - Derating Curve
PACKAGE DIMENSIONS
SMBJ
SMBG
A
B
C
D
E
F
K
L
MIN
MAX
.077 .160
.083 .180
.130 .205
.155 .220
.077
.104
.235
.255
.015
.030
.030
.060
DIMENSIONS IN MILLIMETERS
MIN
MAX
1.96 4.06
2.10 4.57
3.30 5.21
3.94 5.59
1.95
2.65
5.97
6.48
.381
.762
.760
1.520
SMBJ
INCHES
.260
.085
.110
mm
6.60
2.16
2.79
A
B
C
SMBG
INCHES
0.320
0.085
0.110
mm
8.13
2.16
2.79
A
B
C
Copyright © 2007
6-21-2007 Rev C
Microsemi
Page 4
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明