首页 |元器件品牌

MXLCE9.0TR [MICROSEMI]

Trans Voltage Suppressor Diode, 1500W, 9V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE 1, 2 PIN;
MXLCE9.0TR
型号： MXLCE9.0TR
厂家： Microsemi    Microsemi
描述：

Trans Voltage Suppressor Diode, 1500W, 9V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE 1, 2 PIN

局域网 二极管
文件： 总4页 (文件大小：225K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
LCE6.5 thru LCE170A, e3  
1500 WATT LOW CAPACITANCE  
TRANSIENT VOLTAGE SUPPRESSOR  
S C O T T S D A L E D I V I S I O N  
DESCRIPTION  
APPEARANCE  
This Transient Voltage Suppressor (TVS) product family includes a rectifier  
diode element in series and opposite direction to achieve low capacitance  
performance below 100 pF (see Figure 2). The low level of TVS capacitance  
may be used for protecting higher frequency applications in inductive  
switching environments or electrical systems involving secondary lightning  
effects per IEC61000-4-5 as well as RTCA/DO-160D or ARINC 429 for  
airborne avionics. With virtually instantaneous response, they also protect  
from ESD and EFT per IEC61000-4-2 and IEC61000-4-4. If bipolar transient  
capability is required, two of these low capacitance TVS devices may be used  
in parallel in opposite directions (anti-parallel) for complete ac protection as  
shown in Figure 4.  
CASE 1  
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com  
FEATURES  
APPLICATIONS / BENEFITS  
•
•
•
Unidirectional low-capacitance TVS (for bidirectional see  
Figure 4)  
•
•
•
Protection from switching transients and induced RF  
Low capacitance for data line protection to 1 MHz  
Economical plastic encapsulated TVS series for thru-  
hole mounting  
Protection for aircraft fast data rate lines up to Level 5  
Waveform 4 and Level 2 Waveform 5A in RTCA/DO-  
160D (also see MicroNote 130) & ARINC 429 with bit  
rates of 100 kb/s (per ARINC 429, Part 1, par 2.4.1.1)  
Suppresses transients up to 1500 watts @ 10/1000 µs  
(see Figure 1)*  
•
•
•
Clamps transient in less than 100 pico seconds  
Working voltage (VWM) range 6.5 V to 170 V  
•
•
Protection from ESD and EFT per IEC 61000-4-2 and  
IEC 61000-4-4  
Secondary lightning protection per IEC61000-4-5 with  
42 Ohms source impedance:  
Class 1: LCE6.5 to LCE170A  
Class 2: LCE6.5 to LCE150A  
Class 3: LCE6.5 to LCE70A  
Class 4: LCE6.5 to LCE36A  
Options for screening in accordance with MIL-PRF-  
19500 for JAN, JANTX, JANTXV, and JANS are also  
available by adding MQ, MX, MV, MSP prefixes  
respectively to part numbers, e.g. MXLCE6.5A,  
MVLCE45A, etc.  
•
Surface mount equivalent packages also available as  
SMCJLCE6.5 - SMCJLCE170A or SMCGLCE6.5 -  
SMCGLCE170A in separate data sheet (consult factory  
for other surface mount options)  
•
•
Secondary lightning protection per IEC61000-4-5 with  
12 Ohms source impedance:  
Class 1 : LCE6.5 to LCE90A  
Class 2: LCE6.5 to LCE45 A  
Class 3: LCE6.5 to LCE22A  
Class 4: LCE6.5 to LCE11A  
•
•
RoHS Compliant devices available by adding “e3” suffix  
Metal hermetically sealed DO-13 axial-leaded  
equivalents available in the LC6.5 - LC170A series in  
separate data sheet  
Secondary lightning protection per IEC61000-4-5 with  
2 Ohms source impedance:  
Class 2: LCE6.5 to LCE20A  
Class 3: LCE6.5 to LCE10A  
MAXIMUM RATINGS  
MECHANICAL AND PACKAGING  
•
1500 Watts for 10/1000 μs with repetition rate of 0.01% or  
•
•
CASE: Void-free transfer molded thermosetting  
epoxy body meeting UL94V-0  
less* at lead temperature (TL) 25oC (See Figs. 1, 2, & 4)  
•
•
Operating & Storage Temperatures: -65o to +150oC  
TERMINATIONS: Tin-lead or RoHS Compliant  
annealed matte-Tin plating readily solderable per  
MIL-STD-750 method 2026  
Thermal Resistance: 22ºC/W junction to lead at 3/8  
inch (10 mm) from body, or 82ºC/W junction to ambient  
when mounted on FR4 PC board with 4 mm2 copper  
pads (1oz) and track width 1 mm, length 25 mm  
•
•
•
•
POLARITY: Cathode indicated by band  
MARKING: Part number and polarity band  
WEIGHT: 1.5 grams. (Approx)  
•
•
Steady-State Power dissipation*: 5 watts at TL = 40oC,  
or 1.52 watts at TA = 25ºC when mounted on FR4 PC  
board described for thermal resistance  
TAPE & REEL option: Standard per EIA-296 (add  
“TR” suffix to part number)  
Solder Temperatures: 260 o C for 10 s (maximum)  
•
See “CASE 1” package dimensions on last page  
* TVS devices are not typically used for dc power dissipation and are instead operated < VWM (rated standoff voltage) except for transients that briefly  
drive the device into avalanche breakdown (VBR to VC region) of the TVS element. Also see Figures 3 and 4 for further protection details in rated peak  
pulse power for unidirectional and bidirectional configurations respectively.  
Copyright © 2008  
Microsemi  
Page 1  
10-29-2008 REV F  
Scottsdale Division  
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503  
LCE6.5 thru LCE170A, e3  
1500 WATT LOW CAPACITANCE  
TRANSIENT VOLTAGE SUPPRESSOR  
S C O T T S D A L E D I V I S I O N  
ELECTRICAL CHARACTERISTICS @ 25oC  
MAXIMUM  
PEAK PULSE  
CURRENT  
WORKING  
INVERSE  
BLOCKING  
VOLTAGE  
INVERSE  
BLOCKING  
LEAKAGE  
CURRENT  
PEAK  
INVERSE  
BLOCKING  
VOLTAGE  
VOLTS  
MAXIMUM  
CLAMPING  
VOLTAGE  
MAXIMUM  
STANDBY  
CURRENT  
MAXIMUM  
CAPACITANCE  
@ 0 V  
f = 1 MHz  
BREAKDOWN VOLTAGE  
REVERSE  
STANDOFF  
VOLTAGE  
IPP  
@ 10/1000 µs  
@
I(BR)  
VC @ IPP  
ID @VWM  
VWIB  
IIB @ VWIB  
MICROSEMI  
PART  
NUMBER  
V(BR)  
VWM  
VOLTS  
6.5  
6.5  
7.0  
7.0  
7.5  
7.5  
8.0  
8.0  
8.5  
8.5  
9.0  
9.0  
10  
10  
11  
11  
12  
12  
13  
13  
14  
14  
15  
15  
16  
16  
17  
17  
18  
18  
20  
20  
22  
22  
24  
24  
26  
26  
28  
28  
30  
30  
33  
33  
36  
36  
40  
40  
43  
43  
45  
45  
48  
VPIB  
VOLTS  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
200  
200  
200  
200  
200  
200  
200  
200  
VOLTS  
μA  
1000  
1000  
500  
500  
250  
250  
100  
100  
50  
50  
10  
10  
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
VOLTS  
12.3  
11.2  
13.3  
12.0  
14.3  
12.9  
15.0  
13.6  
15.9  
14.4  
16.9  
15.4  
18.8  
17.0  
20.1  
18.2  
22.0  
19.9  
23.8  
21.5  
25.8  
23.2  
26.9  
24.4  
28.8  
26.0  
30.5  
27.6  
32.2  
29.2  
35.8  
32.4  
39.4  
35.5  
43.0  
38.9  
46.6  
42.1  
50.1  
45.4  
53.5  
48.4  
58.0  
53.3  
64.3  
58.1  
71.4  
64.5  
76.7  
69.4  
80.3  
72.7  
85.5  
77.4  
91.1  
82.4  
pF  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
mA  
10  
10  
10  
10  
10  
10  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
AMPS  
100  
100  
100  
100  
100  
100  
100  
100  
94  
100  
89  
97  
80  
88  
74  
82  
68  
75  
63  
70  
58  
65  
56  
61  
52  
57  
49  
54  
46  
51  
42  
46  
38  
42  
35  
39  
32  
36  
VOLTS  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
75  
150  
150  
150  
150  
150  
150  
150  
150  
µA  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
MIN  
MAX  
8.82  
7.98  
9.51  
8.60  
10.2  
9.21  
10.9  
9.83  
11.5  
10.4  
12.2  
11.1  
13.6  
12.3  
14.9  
13.5  
16.3  
14.7  
17.6  
15.9  
19.1  
17.2  
20.4  
18.5  
21.8  
19.7  
23.1  
20.9  
24.4  
22.1  
27.1  
24.5  
29.8  
26.9  
32.6  
29.5  
35.3  
31.9  
38.0  
34.4  
40.7  
36.8  
44.9  
40.6  
48.9  
44.2  
54.3  
49.1  
58.4  
52.8  
61.1  
55.3  
65.1  
58.9  
69.3  
62.7  
LCE6.5  
LCE6.5A  
LCE7.0  
LCE7.0A  
LCE7.5  
LCE7.5A  
LCE8.0  
LCE8.0A  
LCE8.5  
LCE8.5A  
LCE9.0  
LCE9.0A  
LCE10  
LCE10A  
LCE11  
LCE11A  
LCE12  
LCE12A  
LCE13  
LCE13A  
LCE14  
LCE14A  
LCE15  
LCE15A  
LCE16  
LCE16A  
LCE17  
LCE17A  
LCE18  
LCE18A  
LCE20  
LCE20A  
LCE22  
LCE22A  
LCE24  
LCE24A  
LCE26  
LCE26A  
LCE28  
LCE28A  
LCE30  
LCE30A  
LCE33  
LCE33A  
LCE36  
LCE36A  
LCE40  
LCE40A  
LCE43  
LCE43A  
LCE45  
7.22  
7.22  
7.78  
7.78  
8.33  
8.33  
8.89  
8.89  
9.44  
9.44  
10.0  
10.0  
11.1  
11.1  
12.2  
12.2  
13.3  
13.3  
14.4  
14.4  
15.6  
15.6  
16.7  
16.7  
17.8  
17.8  
18.9  
18.9  
20.0  
20.0  
22.2  
22.2  
24.4  
24.4  
26.7  
26.7  
28.9  
28.9  
31.1  
31.1  
33.3  
33.3  
36.7  
36.7  
40.0  
40.0  
44.4  
44.4  
47.8  
47.8  
50.0  
50.0  
53.3  
53.3  
56.7  
56.7  
30  
33  
28  
31  
25.4  
28.1  
23.3  
25.8  
21.0  
23.3  
19.5  
21.6  
18.7  
20.6  
17.5  
19.4  
16.5  
18.2  
LCE45A  
LCE48  
LCE48A  
LCE51  
LCE51A  
1
1
1
1
48  
51  
51  
5
5
5
1
Copyright © 2008  
10-29-2008 REV F  
Microsemi  
Page 2  
Scottsdale Division  
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503  
LCE6.5 thru LCE170A, e3  
1500 WATT LOW CAPACITANCE  
TRANSIENT VOLTAGE SUPPRESSOR  
S C O T T S D A L E D I V I S I O N  
MAXIMUM  
PEAK  
PULSE  
WORKING  
INVERSE  
BLOCKING  
VOLTAGE  
INVERSE  
BLOCKING  
LEAKAGE  
CURRENT  
PEAK  
INVERSE  
BLOCKING  
VOLTAGE  
VOLTS  
MAXIMUM  
CLAMPING  
VOLTAGE  
MAXIMUM  
STANDBY  
CURRENT  
CAPACI-  
TANCE  
@ 0  
BREAKDOWN VOLTAGE  
REVERSE  
STANDOFF  
VOLTAGE  
VWM  
VOLTS  
54  
CURRENT  
@
I(BR)  
VC @ IPP  
ID @VWM  
Volts  
IPP  
@
VWIB  
IIB @ VWIB  
MICROSEMI  
PART  
NUMBER  
V(BR)  
VOLTS  
VPIB  
VOLTS  
200  
200  
200  
200  
200  
200  
200  
200  
200  
200  
200  
200  
200  
200  
200  
200  
200  
200  
400  
400  
400  
400  
400  
400  
400  
400  
400  
400  
400  
400  
10/1000 µs  
AMPS  
15.6  
17.2  
14.6  
16.0  
14.0  
15.5  
13.2  
14.6  
12.0  
13.3  
11.2  
12.4  
10.6  
11.6  
9.4  
μA  
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
VOLTS  
96.3  
87.1  
103.0  
93.6  
107.0  
96.8  
114.0  
103.0  
125  
113  
134  
121  
142  
129  
160  
146  
179  
162  
196  
178  
214  
193  
231  
209  
268  
243  
287  
259  
304  
pF  
100  
100  
100  
100  
90  
90  
90  
90  
90  
90  
90  
90  
90  
90  
90  
90  
90  
90  
90  
90  
90  
90  
90  
90  
90  
90  
90  
90  
90  
90  
mA  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
VOLTS  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
300  
300  
300  
300  
300  
300  
300  
300  
300  
300  
300  
300  
300  
300  
300  
300  
µA  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
MIN  
MAX  
73.3  
66.3  
78.7  
71.2  
81.5  
73.7  
86.9  
78.6  
95.1  
86.0  
102.0  
92.1  
108  
98.0  
122  
111  
136  
123  
149  
135  
163  
147  
176  
159  
204  
185  
218  
197  
231  
209  
LCE54  
60.0  
60.0  
64.4  
64.4  
66.7  
66.7  
71.1  
71.1  
77.8  
77.8  
83.3  
83.3  
88.7  
88.7  
100  
100  
111  
111  
122  
122  
133  
133  
144  
144  
167  
167  
178  
178  
189  
189  
LCE54A  
LCE58  
54  
58  
LCE58A  
58  
LCE60  
60  
LCE60A  
LCE64  
60  
64  
LCE64A  
64  
LCE70  
70  
LCE70A  
LCE75  
70  
75  
LCE75A  
75  
LCE80  
80  
LCE80A  
LCE90  
80  
90  
LCE90A  
LCE100  
LCE100A  
LCE110  
LCE110A  
LCE120  
LCE120A  
LCE130  
LCE130A  
LCE150  
LCE150A  
LCE160  
LCE160A  
LCE170  
LCE170A  
90  
10.3  
8.4  
9.3  
7.7  
8.4  
7.0  
7.8  
6.5  
7.2  
5.6  
6.2  
5.2  
5.8  
4.9  
5.4  
100  
100  
110  
110  
120  
120  
130  
130  
150  
150  
160  
160  
170  
170  
275  
NOTE: TVS are normally selected according to the reverse “Standoff Voltage” (VWM) that should be equal to or greater than the dc or continuous  
peak operating voltage level.  
GRAPHS  
FIGURE 1  
Peak Pulse Power vs.  
Pulse Time (tW) in μs  
Pulse Time (tw) in μs  
Copyright © 2008  
10-29-2008 REV F  
Microsemi  
Page 3  
Scottsdale Division  
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503  
LCE6.5 thru LCE170A, e3  
1500 WATT LOW CAPACITANCE  
TRANSIENT VOLTAGE SUPPRESSOR  
S C O T T S D A L E D I V I S I O N  
SCHEMATIC APPLICATIONS  
The TVS low capacitance device configuration is shown in Figure 2. As a further option for unidirectional applications, an additional low  
capacitance rectifier diode may be used in parallel in the same polarity direction as the TVS as shown in Figure 3. In applications where random  
high voltage transients occur, this will prevent reverse transients from damaging the internal low capacitance rectifier diode and also provide a  
low voltage conducting direction. The added rectifier diode should be of similar low capacitance and also have a higher reverse voltage rating  
than the TVS clamping voltage VC. The Microsemi recommended rectifier part number is the “ELCR80” for the application in Figure 5. If using  
two (2) low capacitance TVS devices in anti-parallel for bidirectional applications, this added protective feature for both directions (including the  
reverse of each rectifier diode) is also provided. The unidirectional and bidirectional configurations in Figure 3 and 4 will both result in twice the  
capacitance of Figure 2.  
FIGURE 2  
FIGURE 3  
FIGURE 4  
TVS with internal Low  
Capacitance Diode  
Optional Unidirectional  
configuration (TVS and  
separate rectifier diode)  
in parallel)  
Optional Bidirectional  
configuration (two TVS  
devices in anti-parallel)  
PACKAGE DIMENSIONS  
Dimensions in inches (mm)  
CASE 1  
Copyright © 2008  
10-29-2008 REV F  
Microsemi  
Page 4  
Scottsdale Division  
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明