SG7915AL/DESC 概述
NEGATIVE FIXED VOLTAGE REGULATOR 负的固定电压稳压器 线性稳压器IC
SG7915AL/DESC 规格参数
是否无铅: | 含铅 | 是否Rohs认证: | 不符合 |
生命周期: | Active | 零件包装代码: | QLCC |
包装说明: | QCCN, LCC20,.35SQ | 针数: | 20 |
Reach Compliance Code: | compliant | ECCN代码: | EAR99 |
HTS代码: | 8542.39.00.01 | 风险等级: | 5.37 |
可调性: | FIXED | 标称回动电压 1: | 2.3 V |
最大绝对输入电压: | 40 V | 最大输入电压: | 30 V |
最小输入电压: | 14.5 V | JESD-30 代码: | X-CQCC-N20 |
JESD-609代码: | e0 | 长度: | 8.89 mm |
最大电网调整率: | 0.075% | 最大负载调整率: | 0.1% |
功能数量: | 1 | 输出次数: | 1 |
端子数量: | 20 | 工作温度TJ-Max: | 150 °C |
工作温度TJ-Min: | -55 °C | 最大输出电流 1: | 1.5 A |
最大输出电压 1: | 12.2 V | 最小输出电压 1: | 11.8 V |
标称输出电压 1: | 12 V | 封装主体材料: | CERAMIC, METAL-SEALED COFIRED |
封装代码: | QCCN | 封装等效代码: | LCC20,.35SQ |
封装形状: | UNSPECIFIED | 封装形式: | CHIP CARRIER |
峰值回流温度(摄氏度): | NOT SPECIFIED | 认证状态: | Not Qualified |
调节器类型: | FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR | 筛选级别: | MIL-STD-883 |
座面最大高度: | 2.286 mm | 子类别: | Other Regulators |
表面贴装: | YES | 技术: | BIPOLAR |
端子面层: | TIN LEAD | 端子形式: | NO LEAD |
端子节距: | 1.27 mm | 端子位置: | QUAD |
处于峰值回流温度下的最长时间: | NOT SPECIFIED | 最大电压容差: | 2.6% |
宽度: | 8.89 mm | Base Number Matches: | 1 |
SG7915AL/DESC 数据手册
通过下载SG7915AL/DESC数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载SG7900A/SG7900
NEGATIVE FIXED VOLTAGE REGULATOR
DESCRIPTION
FEATURES
The SG7900A/SG7900 series of negative regulators offer self-contained,
fixed-voltage capability with up to 1.5A of load current. With a variety of
output voltages and four package options this regulator series is an
optimum complement to the SG7800A/SG7800, SG140 line of three
terminal regulators.
• Output voltage set internally to ±1.5% on SG7900A
• Output current to 1.5A
• Excellent line and load regulation
• Foldback current limiting
• Thermal overload protection
• Voltages available: -5V, -12V, -15V
• Contact factory for other voltage options
• Available in surface mount package
These units feature a unique band gap reference which allows the
SG7900A series to be specified with an output voltage tolerance of±1.5%.
TheSG7900Aversionsalsooffermuchimprovedlineregulationcharacter-
istics.
HIGH RELIABILITY FEATURES
- SG7900A/SG7900
All protective features of thermal shutdown, current limiting, and safe-area
control have been designed into these units and since these regulators
require only a single output capacitor (SG7900 series) or a capacitor and
5mA minimum load (SG120 series) for satisfactory performance, ease of
application is assured.
♦ Available to MIL-STD - 883
♦ MIL-M38510/11501BXA - JAN7905T
♦ MIL-M38510/11505BYA - JAN7905K
♦ MIL-M38510/11502BXA - JAN7912T
♦ MIL-M38510/11506BYA - JAN7912K
♦ MIL-M38510/11503BXA - JAN7915T
♦ MIL-M38510/11507BYA - JAN7915K
♦ LMI level "S" processing available
Although designed as fixed-voltage regulators, the output voltage can be
increased through the use of a simple voltage divider. The low quiescent
drain current of the device insures good regulation when this method is
used, especially for the SG120 series.
These devices are available in hermetically sealed TO-257, TO-3, TO-39
and LCC package.
SCHEMATIC DIAGRAM
**
**
For normal
operation the (VOS
)
Sense Pin must be
externally
connected to the
load.
05/01 Rev 1.5
LINFINITY Microelectronics Inc.
11861 Western Avenue ∞ Garden Grove, CA 92841
(714) 898-8121 ∞ FAX: (714) 893-2570
Copyright 1999
1
SG7900A/SG7900 SERIES
NEGATIVE REGULATOR
ABSOLUTE MAXIMUM RATINGS (Note 1)
Device
Output Voltage
-5V
Input Voltage Differential
(Output shorted to ground)
Input Voltage
-35V
35V
35V
35V
-12V
-15V
-35V
-40V
Operating Junction Temperature
Hermetic (K, T, IG & L - Packages) ........................
Storage Temperature Range .......................... -65°C to 150°C
Lead Temperature (Soldering, 10 Seconds) ................. 300°C
150°C
Note 1. Values beyond which damage may occur.
THERMAL DATA
K Package:
Note A. Junction Temperature Calculation: TJ = TA + (PD x θJA).
Note B. The above numbers forθJC aremaximumsforthelimitingthermal
resistance of the package in a standard mounting configuration.
The θJA numbers are meant to be guidelines for the thermal
performance of the device/pc-board system. All of the above
assume no ambient airflow.
Thermal Resistance-Junction to Case, θJC ................. 3.0°C/W
Thermal Resistance-Junction to Ambient, θJA ............... 35°C/W
T Package:
Thermal Resistance-Junction to Case, θJC .................. 15°C/W
Thermal Resistance-Junction to Ambient, θJA ............ 120°C/W
IG Package:
Thermal Resistance-Junction to Case, θJC ................. 3.5°C/W
Thermal Resistance-Junction to Ambient, θJA .............. 42°C/W
L Package:
Thermal Resistance-Junction to Case, θJC .................. 35°C/W
Thermal Resistance-Junction to Ambient, θJA ............ 120°C/W
RECOMMENDED OPERATING CONDITIONS (Note 2)
Operating Junction Temperature Range:
SG7900A/7900 ............................................. -55°C to 150°C
Note 2. Range over which the device is functional.
CHARACTERISTIC CURVES
FIGURE 1.
FIGURE 2.
FIGURE 3.
MAXIMUM AVERAGE POWER DISSIPATION
QUIESCENT CURRENT VS. LOAD
TEMPERATURE COEFFICIENT
05/01 Rev 1.5
LINFINITY Microelectronics Inc.
11861 Western Avenue ∞ Garden Grove, CA 92841
Copyright 1999
2
(714) 898-8121 ∞ FAX: (714) 893-2570
SG7900A/SG7900 SERIES
NEGATIVE REGULATOR
CHARACTERISTIC CURVES (continued)
FIGURE 6.
SHORT CIRCUIT CURRENT VS. VIN
FIGURE 4.
SHORTCIRCUIT CURRENT VS. VIN
FIGURE 5.
QUIESCENT CURRENT VS. VIN
FIGURE 7.
DROPOUT CHARACTERISTICS
FIGURE 8.
RIPPLE REJECTION VS. FREQUENCY
APPLICATIONS
FIGURE 10 - CIRCUIT FOR INCREASING OUTPUT VOLTAGE
FIGURE 9 - FIXED OUTPUT REGULATOR
NOTE: 1. C1isrequiredonlyifregulatorisseparatedfromrectifierfilter.
2. Both C1 and C2 should be low E.S.R. types such as solid
tantalum. Ifaluminumelectrolyticsareused,atleast10times
values shown should be selected.
NOTE: C3 optional for improved transient response and ripple rejec
R1 + R2
R1
V(REG)
15mA
VOUT = V (REGULATOR)
R2 =
3. If large output capacities are used, the regulators must be
protectedfrommomentaryinputshorts. Ahighcurrentdiode
05/01 Rev 1.5
LINFINITY Microelectronics Inc.
11861 Western Avenue ∞ Garden Grove, CA 92841
Copyright 1999
3
(714) 898-8121 ∞ FAX: (714) 893-2570
SG7900A/SG7900 SERIES
-5.0V NEGATIVE REGULATOR
ELECTRICAL SPECIFICATIONS (Note 1)
(Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG7905A/SG7905 with -55°C ≤ TA ≤ 150°C,
V
IN = -10V, IO = 500mA for the K and IG -Power Packages-, IO = 100mA for the T and L packages, CIN = 2µF, and COUT = 1.0µF. Low duty cycle pulse
testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.)
SG7905A/SG7905
SG7905A
Min. Typ. Max.
-4.92 -5.00 -5.08 -4.8 -5.0 -5.2
SG7905
Min. Typ. Max.
Parameter
Output Voltage
Units
Test Conditions
TJ = 25°C
V
Line Regulation (Note 1)
VIN = -7.5V to -25V, TJ = 25°C
VIN = -8V to -12V, TJ = 25°C
Power Pkgs: IO = 5mA to 1.5A, TJ = 25°C
IO = 250mA to 750mA, TJ = 25°C
T - Pkg: IO = 5mA to 500mA, TJ = 25°C
VIN = -8V to -20V
Power Pkgs: IO = 5mA to 1.0A, P ≤ 20W
T - Pkg: IO = 5mA to 500mA, P ≤ 2W
Over Temperature Range
TJ = 25°C
with Line: VIN = -8V to -25V
with Load: IO = 5mA to 1.0A (Power Packages)
IO = 5mA to 500mA (T)
5
3
15
15
5
25
12
75
25
30
3
1
15
15
5
50
25
100
25
mV
mV
mV
mV
mV
Load Regulation (Note 1)
100
Total Output Voltage
Tolerance
-4.85 -5.00 -5.15 -4.70 -5.00 -5.30
-4.85 -5.00 -5.15 -4.70 -5.00 -5.30
V
V
Quiescent Current
2.5
2.0
1.3
0.5
0.5
2.5
2.0
1.3
0.5
0.5
mA
mA
mA
mA
mA
Quiescent Current Change
Dropout Voltage
∆VO = 100mV, TJ = 25°C
Power Pkgs: IO = 1.0A, T - Pkg: IO = 500mA
Power Pkgs: TJ = 25°C
T - Pkg: TJ = 25°C
Power Pkgs: VIN = -35V, TJ = 25°C
T - Pkg: VIN = -35V, TJ = 25°C
∆VIN = 10V, f = 120Hz, TJ = 25°C
1.1
2.3
3.3
1.4
1.2
0.6
1.1
2.3
3.3
1.4
1.2
0.6
V
A
A
A
A
dB
µV/V
mV
°C
Peak Output Current
Short Circuit Current
Ripple Rejection
1.5
0.5
1.5
0.5
54
54
Output Noise Voltage (rms) f = 10Hz to 100KHz (Note 2)
25
20
175
80
25
20
175
80
Long Term Stability
Thermal Shutdown
1000hrs. at TJ = 125°C
IO = 5mA
Note 1. All regulation tests are made at constant junction temperature with low duty cycle testing.
2. This test is guaranteed but is not tested in production.
05/01 Rev 1.5
Copyright 1999
4
LINFINITY Microelectronics Inc.
11861 Western Avenue ∞ Garden Grove, CA 92841
(714) 898-8121 ∞ FAX: (714) 893-2570
SG7900A/SG7900 SERIES
-12V NEGATIVE REGULATOR
ELECTRICAL SPECIFICATIONS (Note 1)
(Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG7912A/SG7912 with -55°C ≤ TA ≤ 150°C,
V
IN = -19V, IO = 500mA for the K and IG -Power Packages-, IO = 100mA for the T and L packages, CIN = 2µF, and COUT = 1.0µF. Low duty cycle pulse
testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.)
SG7912A/SG7912
SG7912A
SG7912
Min. Typ. Max. Min. Typ. Max.
-11.8 -12.0 -12.2 -11.5 -12.0 -12.5
Parameter
Output Voltage
Test Conditions
Units
TJ = 25°C
V
VIN = -14.5V to -30V, TJ = 25°C
VIN = -16V to -22V, TJ = 25°C
Power Pkgs: IO = 5mA to 1.5A, TJ = 25°C
IO = 250mA to 750mA, TJ = 25°C
T - Pkg: IO = 5mA to 500mA, TJ = 25°C
VIN = -14.5V to -27V
Power Pkgs: IO = 5mA to 1.0A, P ≤ 20W
T - Pkg: IO = 5mA to 500mA, P ≤ 2W
Over Temperature Range
4
3
20
10
10
60
30
90
40
40
10
3
12
4
120
60
120
60
mV
mV
mV
mV
mV
Line Regulation (Note 1)
Load Regulation (Note 1)
10
240
Total Output Voltage
Tolerance
-11.7 -12.0 -12.3 -11.4 -12.0 -12.6
-11.7 -12.0 -12.3 -11.4 -12.0 -12.6
V
V
4
3
1.0
0.5
0.5
4
3
1.0
0.5
0.5
mA
mA
mA
mA
mA
Quiescent Current
TJ = 25°C
with Line: VIN = -14.5V to -30V
with Load: IO = 5mA to 1.0A (Power Packages)
IO = 5mA to 500mA (T)
Quiescent Current Change
∆VO = 100mV, TJ = 25°C
Dropout Voltage
Power Pkgs: IO = 1.0A, T - Pkg: IO = 500mA
Power Pkgs: TJ = 25°C
T - Pkg: TJ = 25°C
Power Pkgs: VIN = -35V, TJ = 25°C
T - Pkg: VIN = -35V, TJ = 25°C
∆VIN = 10V, f = 120Hz, TJ = 25°C
f = 10Hz to 100KHz (Note 2)
1000hrs. at TJ = 125°C
1.1
2.3
3.3
1.4
1.2
0.6
1.1
2.3
3.3
1.4
0.2
0.6
V
A
A
A
A
dB
µV/V
mV
°C
1.5
0.5
1.5
0.5
Peak Output Current
Short Circuit Current
54
54
Ripple Rejection
25
60
175
80
25
60
175
80
Output Noise Voltage (rms)
Long Term Stability
Thermal Shutdown
IO = 5mA
Note 1. All regulation tests are made at constant junction temperature with low duty cycle testing.
2. This test is guaranteed but is not tested in production.
05/01 Rev 1.5
Copyright 1999
5
LINFINITY Microelectronics Inc.
11861 Western Avenue ∞ Garden Grove, CA 92841
(714) 898-8121 ∞ FAX: (714) 893-2570
SG7900A/SG7900 SERIES
-15V NEGATIVE REGULATOR
ELECTRICAL SPECIFICATIONS (Note 1)
(Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG7915A/SG7915 with -55°C ≤ TA ≤ 150°C,
V
IN = -23V, IO = 500mA for the K and IG -Power Packages-, IO = 100mA for the T and L packages, CIN = 2µF, and COUT = 1.0µF. Low duty cycle pulse
testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.)
SG7915A/SG7915
SG7915A
SG7915
Min. Typ. Max. Min. Typ. Max.
-14.8 -15.0 -15.2 -14.4 -15.0 -15.6
Parameter
Output Voltage
Test Conditions
Units
TJ = 25°C
V
VIN = -17.5V to -30V, TJ = 25°C
VIN = -20V to -25V, TJ = 25°C
Power Pkgs: IO = 5mA to 1.5A, TJ = 25°C
IO = 250mA to 750mA, TJ = 25°C
T - Pkg: IO = 5mA to 500mA, TJ = 25°C
VIN = -18.5V to -30V
Power Pkgs: IO = 5mA to 1.0A, P ≤ 20W
T - Pkg: IO = 5mA to 500mA, P ≤ 2W
Over Temperature Range
5
3
30
4
75
40
100
50
11
3
12
4
150
75
150
75
mV
mV
mV
mV
mV
Line Regulation (Note 1)
Load Regulation (Note 1)
10
50
10
240
Total Output Voltage
Tolerance
-14.6 -15.0 -15.4 -14.25-15.00-15.75
-14.6 -15.0 -15.4 -14.25-15.00-15.75
V
V
4
3
1.0
0.5
0.5
4
3
1.0
0.5
0.5
mA
mA
mA
mA
mA
Quiescent Current
TJ = 25°C
with Line: VIN = -18.5V to -30V
with Load: IO = 5mA to 1.0A (Power Packages)
IO = 5mA to 500mA (T)
Quiescent Current Change
∆VO = 100mV, TJ = 25°C
Dropout Voltage
Power Pkgs: IO = 1.0A, T - Pkg: IO = 500mA
Power Pkgs: TJ = 25°C
T - Pkg: TJ = 25°C
Power Pkgs: VIN = -35V, TJ = 25°C
T - Pkg: VIN = -35V, TJ = 25°C
∆VIN = 10V, f = 120Hz, TJ = 25°C
f = 10Hz to 100KHz (Note 2)
1000hrs. at TJ = 125°C
1.1
2.3
3.3
1.4
1.2
0.6
1.1
2.3
3.3
1.4
1.2
0.6
V
A
A
A
A
dB
µV/V
mV
°C
1.5
0.5
1.5
0.5
Peak Output Current
Short Circuit Current
54
54
Ripple Rejection
25
60
175
80
25
60
175
80
Output Noise Voltage (rms)
Long Term Stability
Thermal Shutdown
IO = 5mA
Note 1. All regulation tests are made at constant junction temperature with low duty cycle testing.
2. This test is guaranteed but is not tested in production.
05/01 Rev 1.5
Copyright 1999
6
LINFINITY Microelectronics Inc.
11861 Western Avenue ∞ Garden Grove, CA 92841
(714) 898-8121 ∞ FAX: (714) 893-2570
SG7900A/SG7900 SERIES
NEGATIVE REGULATOR
CONNECTION DIAGRAMS & ORDERING INFORMATION (See Notes Below)
Ambient
Temperature Range
Package
Part No.
Connection Diagram
3-TERMINAL TO-3
METAL CAN
K-PACKAGE
SG79XXAK/883B
SG7905AK/DESC
SG7912AK/DESC
SG7915AK/DESC
SG79XXAK
SG79XXK/883B
JAN7905K
JAN7912K
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
0°C to 125°C
GROUND
1
2
CASE IS VIN
VOUT
JAN7915K
SG79XXK
SG79XXK
3-PIN TO-39 METAL CAN
T-PACKAGE
SG79XXAT/883B
SG7905AT/DESC
SG7912AT/DESC
SG7915AT/DESC
SG79XXAT
SG79XXT/883B
JAN7905T
JAN7912T
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
GROUND
VOUT
1
2
3
VIN
CASE IS VIN
JAN7915T
SG79XXT
3-PIN HERMETIC TO-257
IG-PACKAGE (Isolated)
SG79XXAIG/883B
SG7905AIG/DESC
SG7912AIG/DESC
SG7915AIG/DESC
SG79XXAIG
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
VOUT
VIN
GROUND
SG79XXIG/883B
SG79XXIG
(See Notes 5 & 6)
20-PIN CERAMIC
LEADLESS CHIP CARRIER
L- PACKAGE
SG79XXL/883B
SG79XXL
SG7905AL/DESC
SG7912AL/DESC
SG7915AL/DESC
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
3
2
1
20 19
1. N.C.
2. VIN
11. N.C.
12. N.C.
13. N.C.
14. N.C.
15. GND
16. N.C.
17. GND
18. N.C.
19. N.C.
20. VIN
3. N.C.
4. VO
5. VO
6. N.C.
7. VO SENSE
8. N.C.
9. N.C.
10. N.C.
4
18
5
6
7
8
17
16
15
14
9
10 11 12 13
Note 1. Contact factory for JAN and DESC product availability.
2. All parts are viewed from the top.
3. "XX" to be replaced by output voltage of specific fixed regulator.
4. Some products will be available in hermetic flat pack (F). Consult factory for price and availability.
5. Both inputs and outputs must be externally connected together at the device terminals.
6. For normal operation, the VO SENSE pin must be externally connected to the load.
05/01 Rev 1.5
LINFINITY Microelectronics Inc.
11861 Western Avenue ∞ Garden Grove, CA 92841
Copyright 1999
7
(714) 898-8121 ∞ FAX: (714) 893-2570
SG7915AL/DESC 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
SG7915AR/883B | MICROSEMI | Regulator, 1 Output, BIPolar, | 获取价格 | |
SG7915AT | MICROSEMI | NEGATIVE FIXED VOLTAGE REGULATOR | 获取价格 | |
SG7915AT | MICRO-ELECTRONICS | NEGATIVE FIXED VOLTAGE REGULATOR | 获取价格 | |
SG7915AT-DESC | MICROSEMI | Negative Fixed Voltage Regulator | 获取价格 | |
SG7915AT/883B | MICROSEMI | NEGATIVE FIXED VOLTAGE REGULATOR | 获取价格 | |
SG7915AT/883B | MICRO-ELECTRONICS | NEGATIVE FIXED VOLTAGE REGULATOR | 获取价格 | |
SG7915AT/DESC | MICROSEMI | NEGATIVE FIXED VOLTAGE REGULATOR | 获取价格 | |
SG7915AT/DESC | MICRO-ELECTRONICS | NEGATIVE FIXED VOLTAGE REGULATOR | 获取价格 | |
SG7915ATDESC | MICROSEMI | Negative Fixed Voltage Regulator | 获取价格 | |
SG7915IG | MICROSEMI | NEGATIVE FIXED VOLTAGE REGULATOR | 获取价格 |
SG7915AL/DESC 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6