0531-0-15-80-31-01-10-0 [MILL-MAX]

Connector Accessory;


型号：	0531-0-15-80-31-01-10-0
厂家：	MILL-MAX MFG. CORP.
描述：	Connector Accessory
文件：	总2页 (文件大小：152K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MAXIMUM SOLUTIONS

New Receptacle from Mill-Max Oﬀers Zero Proﬁle & Dual Entry

Mill-Max is pleased to announce a new option in our receptacle line-up with the introduction of a

new receptacle providing ﬂush mount PCB assembly and dual entry capability.

The 0531-0-15-15-31-27-10-0 receptacle is a zero proﬁle, solderless press-ﬁt receptacle with an over-

all length of .068”(1,73mm). When pressed in, the 0531 sits ﬂush with the PCB surface to achieve

the lowest possible component height above board. The hexagon shaped head is designed to be

press-ﬁt into a .045”(1,14mm) ø plated through-hole. The open bottom design allows for mating pin

entry from either end. The minimum mating pin length for bottom entry is .045”(1,14mm); for top

entry insertion the minimum length is .054”(1,37mm). This dual entry feature allows for ﬂexibility in

component placement and assembly of boards and modules.

The 0531 also provides early engagement contact, minimal overall length and accepts lead diam-

eters from .018”- .023”(0,46 – 0,58mm). The internal contact allows for short receptacle designs due

to its .062”(1,57mm) length and the fact its design does not require excess protrusion through the

ﬁngers of the contact for electrical connection. The ability to use shorter mating pins provides sev-

eral advantages such as compressed packaging, shorter electrical signal paths and lower potential

RF signal interference.

The receptacle shell is made from brass alloy and, like all Mill-Max pins, are high-speed machined to

precision tolerances. The contact is press-ﬁt into each receptacle shell forming a gas-tight connec-

tion. It is a four ﬁnger contact, precision stamped from beryllium copper strip and heat treated to

provide excellent spring and electrical properties. The receptacle current rating is 3 amps (@10°C

temp. rise in free air). The receptacle shell and contact are gold-plated providing the highest inter-

connect reliability, corrosion protection and wear resistance. Gold plating on the shell of the 0531 is

recommended to yield the best results during the press-ﬁtting operation.

For more information, please visit: www.mill-max.com/PR647.

(8/14 -- PR647)

Mill-Max Mfg. Corp. • 190 Pine Hollow Road, Oyster Bay, NY 11771

516-922-6000 • Fax: 516-922-9253 • www.mill-max.com

PIN RECEPTACLES

FOR .018” - .023” DIAMETER PINS

0507

Solder mount in .042 min. mounting hole

0531

0531-0-15-XX-31-XX-10-0

Hex press-ﬁt in .045 plated through-hole

(Top or Bottom entry capable)

0507-0-15-XX-31-XX-10-0

.020

.038 DIA.

.052 DIA.

.020

.066

.068

.066

.073

.039 DIA.

.090

.031 DIA.

HOLE

.048 DIA.

ORDER CODE: 05XX - 0 - 15 - XX - 31 - XX - 10 - 0

BASIC PART #

SPECIFICATIONS:

Shell Material: Brass Alloy 360, 1/2 Hard

SPECIFY CONTACT FINISH:

SPECIFY SHELL FINISH:

Contact Material: Beryllium Copper Alloy 172, HT

Dimensions: Inches

01 200 P” TIN/LEAD OVER NICKEL

80 200 P” TIN OVER NICKEL (RoHS)

27 30 P” GOLD OVER NICKEL (RoHS)

01 200 P” TIN/LEAD OVER NICKEL

80 200 P” TIN OVER NICKEL (RoHS)

15 10 P” GOLD OVER NICKEL (RoHS)

Tolerances On: Lengths:

Diameters: .002

Angles: 2 °

.005

SELECT CONTACT:

#31 CONTACT

(For alternate contact choices, see group A on page 248)

RoHS-2

2011/65/EU

相关型号：