4064-0-18-01-03-27-40-0 [MILL-MAX]

PCB Terminal,;


型号：	4064-0-18-01-03-27-40-0
厂家：	MILL-MAX MFG. CORP.
描述：	PCB Terminal, PC 端子和端子排
文件：	总1页 (文件大小：83K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PIN RECEPTACLES

for .040” - .060” diameter pins (#03 contact)

and .059” - .063” diameter pins (#42 contact)

PINS

0433/8433

0435/0436

.111188 DDIIAA..

Basic Part

Number

Length

.005500

Basic Part

Number

043ꢀ-0

0436-0

Dia.

Length

0433-0

8433-0

.120

.330

.118

.12ꢀ

.0ꢀ0

.070

0435-0-15-XX-03-XX-10-0

Solder mount in .102 min. mounting hole

Also available on 24mm wide carrier

tape: 9ꢀ0 parts per 13” reel.

X433-0-15-XX-03-XX-04-0

Press-fit in .106 mounting hole

Order as: 043ꢀ-0-ꢀ7-XX-03-XX-10-0

0434

4064

0342

.156 DIA.

.200

• 0342 receptacle uses

.020

.162

.140 DIA.

Mill-Max’s new #42 Contact.

This receptacle will accept

the Ø.061 .002 power pins of

¼ brick DC/DC converters.

.078 DIA.

HOLE

.114

.090

• #42 contact can be ordered

in standard receptacles that

use #03 contact; or it can be

specified as the spring

element inside custom made

receptacles.

.107

4064-0-18-XX-03-XX-40-0

Surface mount

Also available on 16mm wide carrier

tape: 2,400 parts per 13” reel.

Order as: 4064-0-ꢀ8-XX-03-XX-40-0

0434-0-15-XX-03-XX-10-0

0342-0-15-XX-42-XX-10-0

Hex press-fit in .090 .002

plated thru hole

Press-fit in .106 mounting hole

Mechanical Data #42 Contact:

Insertion/Extraction Force with a Ø.061 (nominal) pin:

First Cycle

2nd & Subsequent Cycles

Insertion Force Extraction Force Insertion Force Extraction Force

20N

10N

Compliancy Test (the “spring back” characteristic of the contact to accept

Ø.0ꢀ9 small pin after insertion of a Ø.063 large pin) :

Initial Cycle with Ø.0ꢀ9 pin Second Cycle with Ø.063 pin Third Cycle with Ø.0ꢀ9 pin

Ins. Force Ext. Force Ins. Force Ext. Force Ins. Force Ext. Force

18N

22N

(Insertion/Extraction Forces are in Newtons and measured with polished

steel gage pins having elliptical shaped tips).

ORDER CODE: XXXX - X - 15 - XX - XX - XX - XX - 0

BASIC PART #

SPECIFICATIONS

SHELL MATERIAL:

Brass Alloy 360, 1/2 Hard

SPECIFY SHELL FINISH:

SPECIFY CONTACT FINISH:

01 200μ” TIN/LEAD OVER NICKEL

80 200μ” TIN OVER NICKEL ꢀ

27 30μ” GOLD OVER NICKEL ꢀ

01 200μ” TIN/LEAD OVER NICKEL

80 200μ” TIN OVER NICKEL ꢀ

15 10μ” GOLD OVER NICKEL ꢀ

CONTACT MATERIAL:

Beryllium Copper Alloy 172, HT

DIMENSION IN INCHES

TOLERANCES ON:

LENGTHS:

DIAMETERS: .002

ANGLES: 2ꢁ

.00ꢀ

SELECT CONTACT

#03 (DATA ON PAGE 224) or#42 CONTACT

RoHS

2002/95/EC

www.mill-max.com

ꢀ

516-922-6000

157

相关型号：