835-93-048-10-001 [MILL-MAX]

Board Connector, 48 Contact(s), 2 Row(s), Female, Straight, Solder Terminal;


型号：	835-93-048-10-001
厂家：	MILL-MAX MFG. CORP.
描述：	Board Connector, 48 Contact(s), 2 Row(s), Female, Straight, Solder Terminal
文件：	总2页 (文件大小：245K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

INTERCONNECTS

OFP Pass Thru Sockets for Ø.030” & .025” pins

Single and Double Row

Series 834, 835

ꢀ

• 834/835 Series Pass Thru Sockets have a low

.130” profile and will accept Ø.030” round pin,

as well as industry standard .025” square pin

headers.

• They are typically used to interconnect two or

more parallel circuit boards.

• Sockets are designed for hand, wave or reflow*

soldering. The high temp. insulator is compati-

ble with all solder processes.

• Unique ORGANIC FIBRE PLUG barriers pre-

vent solder, paste or flux from contaminating

the internal spring contacts. After soldering, the

OFP barriers are pushed out of the socket

when the mating header is inserted.

• Mill-Max sockets use a precision machined

brass sleeve with a press-fit beryllium copper

“multi-finger” spring contact.

Typical Application

500%2

#)2#5)4

"/!2$

).4%2ꢆ#/..%#4)/.

0).

• Recommended mounting holes are Ø.046

ꢀꢁꢂꢁꢃ OR

ꢀꢀꢁꢄꢅꢃ 0).3

.003” PTH (1,2 mm drilled prior to plating).

ꢇꢈꢉ 302).'

#/.4!#4

*Intrusive reflow (also called "pin-in-paste") is a tech-

nique of using conventional thru-hole components

in a reflow soldering process. The pass thru socket

is placed into plated-thru-holes in the circuit board

(solder paste has previously been screen printed on

pads adjacent to the holes) and the board is

-)$$,%

#)2#5)4

"/!2$

3/#+%4

).35,!4/2

0!33 4(25

3/#+%43

3/#+%4

3,%%6%

reflowed in the same pass as other SMT compo-

nents. Solder will fill the plated-thru-holes and

achieve solder joints as reliable as wave soldering.

#)2#5)4

"/!2$

,/7%2

#)2#5)4

"/!2$

The OFP barrier prevents solder paste from being

picked-up inside the contact during assembly.

/2'!.)# &)"%2 0,5'

3/,$%2

*/).4

053(%$ /54 "9 ).4%2ꢆ#/..%#4

0). !&4%2 3/,$%2).'

Patent Pending

Ordering Information

Single Row OFP Pass Thru Socket

834-XX-0 _ _-10-001

Fig. 1

Fig. 2

Specify # of pins

01-64

Fig. 1

Double Row OFP Pass Thru Socket

835-XX-0 _ _-10-001

Specify # of pins

02-72

XX= Plating Code

See Below

SPECIFY PLATING CODE XX=

200μ” Sn/Pb 200μ”Sn/Pb

30μ” Au 200μ”Sn/Pb

Sleeve (Pin)

Fig. 2

Contact (Clip)

www.mill-max.com

ꢀ

516-922-6000

(6/04 - 550, 547, 535, 529)

PIN RECEPTACLES

With Organic Fibre Plug Solder Barrier

PINS

• These thru-hole (tubular) receptacles are designed for hand,

wave or reflow* soldering. The ORGANIC FIBRE PLUG

barrier prevents solder, paste or flux from contaminating the

spring contact.

• After soldering, the OFP barrier is pushed out of the recep-

tacle when the device is plugged in.

• All parts are available as discrete receptacles; but for SMT

assembly, certain receptacles are supplied on carrier tape

per EIA-481 to feed industry standard pick and place

machines.

*Intrusive reflow (also called "pin-in-paste") is a technique of using conven-

tional thru-hole components in a reflow soldering process. The receptacles

are placed into plated-thru-holes in the circuit board (solder paste has previously been screen printed on pads adjacent to the

holes) and the board is reflowed in the same pass as other SMT components. Solder will fill the plated-thru-holes and achieve

solder joints as reliable as wave soldering. The OFP barrier prevents solder paste from being picked-up inside the contact

during pick ‘n place assembly. "Overprinting" paste on the solder mask can be used to adjust the volume of paste required to fill

each hole.

5359

0577

4015

4280

.048 DIA.

.038 DIA.

.078 DIA.

.062 DIA.

.068 DIA.

.052 DIA.

.010

ꢀꢁꢂꢃ $)!ꢀ

ꢀꢁꢄꢁ $)!ꢀ

.020

.089

.020

.089

ꢀꢁꢇꢂ

ꢀꢁꢁꢈ

.060

ꢀꢁꢃꢉ

.100

.071

ꢀꢆꢁꢁ

.056 DIA.

.051 DIA.

.009

.043 DIA.

.009

.028 DIA.

.009

ꢀꢁꢅꢆ $)!ꢀ

5359-0-43-01-10-27-10-0

0577-0-43-01-21-27-10-0

4015-0-XX-01-30-27-10-0 4280-0-XX-01-16-27-10-0

Solder mount in Ø.043 .003 PTH. Solder mount in Ø.045 .003 PTH. Solder mount in Ø.057 .003 PTH. Solder mount in Ø.067 .003 PTH.

#10 Contact for Ø.012-.017 pins.

#21 Contact for Ø.015-.022 pins.

#30 Contact for Ø.015-.025 pins.

#16 Contact for Ø.022-.034 pins.

Also available on 8mm wide carrier Also available on 8mm wide carrier

tape: 5,500 parts per 13” reel.

9873

5364

0479

0379

.090 DIA.

.120 DIA.

ꢀꢁꢈꢁ $)!ꢀ

.100 DIA.

.030

.110

.093

.018

.125

.150

ꢀꢁꢆꢃ

.098 DIA.

ꢀꢆꢄꢁ

.072 DIA.

.125

ꢀꢁꢊꢇ $)!ꢀ

.078 DIA.

.068 DIA.

.206

.075 DIA.

.067 DIA.

ꢀꢁꢉꢄ $)!ꢀ

ꢀꢁꢁꢈ

.009

.064 DIA.

.009

9873-0-XX-01-02-27-10-0

5364-0-XX-01-23-27-10-0

0479-0-XX-01-34-27-10-0

0379-0-43-01-34-27-10-0

Solder mount in Ø.083 .003 PTH. Solder mount in Ø.103 .003 PTH.

#02 Contact for Ø.040-.050 pins. #23 Contact for Ø.045-.065 pins.

Also available on 12mm wide carrier Also available on 12mm wide carrier

Solder mount in Ø.077 .003 PTH. Solder mount in Ø.077 .003 PTH.

#34 Contact for Ø.032-.046 pins.

Also available on 16mm wide carrier

tape: 2,500 parts per 13” reel.

#34 Contact for Ø.032-.046 pins.

tape: 4,500 parts per 13” reel.

tape: 2,000 parts per 13” reel.

SPECIFICATIONS

SHELL MATERIAL:

ORDER CODE: XXXX - 0 - XX - 01 - XX - XX -10 - 0

BASIC PART #

Brass Alloy 360, 1/2 Hard

CONTACT MATERIAL:

Beryllium Copper Alloy 172, HT

SOLDER BARRIER:

Organic Fibre Plug™

DIMENSION IN INCHES

TOLERANCES ON:

SPECIFY CONTACT FINISH:

SPECIFY PACKAGING:

43 Discrete receptacles

67 Tape & Reel for SMT

SHELL FINISH:

01 200μ" TIN/LEAD OVER NICKEL

27 30μ" GOLD OVER NICKEL

CONTACT #

Receptacles can be assembled with a choice of

LENGTHS:

DIAMETERS: .002

ANGLES: 2ꢀ

.005

01 200μ" TIN/LEAD OVER NICKEL

contacts, see page 203 for alternates available.

www.mill-max.com

ꢀ

516-922-6000

相关型号：