XP1080-QU-EV1 [MIMIX]
37.0-40.0 GHz GaAs Power Amplifier QFN, 7x7mm; 37.0-40.0 GHz的砷化镓功率放大器QFN封装, 7x7毫米型号: | XP1080-QU-EV1 |
厂家: | MIMIX BROADBAND |
描述: | 37.0-40.0 GHz GaAs Power Amplifier QFN, 7x7mm |
文件: | 总6页 (文件大小:925K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
37.0-40.0 GHz GaAs Power Amplifier
QFN, 7x7mm
January 2010 - Rev 22-Jan-10
P1080-QU
Features
Linear Power Amplifier
On-Chip Power Detector
Output Power Adjust
25.0 dB Small Signal Gain
+27.0 dBm P1dB Compression Point
+38.0 dBm OIP3
Absolute Maximum Ratings1,2
General Description
Supply Voltage (Vd)
+4.3V
Mimix Broadband’s four stage 37.0-40.0 GHz
packaged GaAs MMIC power amplifier has a small
signal gain of 25.0 dB with a +38.0 dBm Output
Third Order Intercept.The amplifier contains an
integrated, temperature compensated, on-chip
power detector.This MMIC uses Mimix
Gate Bias Voltage (Vg)
Input Power (Pin)
-1.5V < Vg < 0V
15 dBm
Abs. Max. Junction/Channel Temp
See MTTF Graph 1
Max. Operating Junction/Channel Temp 175 ºC
Continuous Power Dissipation (Pdiss) at 85 ºC 7.0 W
Thermal Resistance (Tchannel=150 ºC)
Operating Temperature (Ta)
Storage Temperature (Tstg)
Mounting Temperature
ESD Min. - Machine Model (MM)
ESD Min. - Human Body Model (HBM)
MSL Level
12 ºC/W
-40 to +85 ºC
-65 to +150 ºC
See solder reflow profile
Class A
Class 1A
MSL3
Broadband’s GaAs pHEMT device model
technology, and is based upon electron beam
lithography to ensure high repeatability and
uniformity.The device comes in a RoHS compliant
7x7mm QFN Surface Mount Package offering
excellent RF and thermal properties.This device is
well suited for Millimeter-wave Point-to-Point
Radio, LMDS, SATCOM and VSAT applications.
(1) Channel temperature directly affects a device's MTTF. Channel temperature should
be kept as low as possible to maximize lifetime.
(2) For saturated performance it recommended that the sum of (2*Vdd + abs(Vgg)) <9V
Electrical Characteristics for 37 - 40 GHz
(AmbientTemperatureT = 25 oC)
Parameter
Frequency Range (f)
Input Return Loss (S11)
Output Return Loss (S22)
Small Signal Gain (S21)
Units
GHz
dB
dB
dB
Min.
37.0
10.0
4.0
21.0
-
Typ.
-
14.0
8.0
25.0
+/-1.0
50
Max.
40.0
-
-
30.0
-
-
Gain Flatness ( S21)
Reverse Isolation (S12)
dB
dB
-
Output Power for 1dB Compression (P1dB)
Output IMD3 with Pout (scl) = 14 dBm
Output IP3
Drain Bias Voltage (Vd)
Gate Bias Voltage (Vg)
dBm
dBc
dBm
VDC
VDC
mA
-
27.0
48.0
+38.0
4.0
-0.3
1000
-
-
-
43.0
35.5
-
-1.0
-
4.0
-0.1
1200
Supply Current (Id1) (Vd=4.0V,Vg=-0.3V)
Page 1 of 6
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
37.0-40.0 GHz GaAs Power Amplifier
QFN, 7x7mm
January 2010 - Rev 22-Jan-10
P1080-QU
Power Amplifier Measurements
XP1080-QU-0N00: Small signal Gain (S21)
Vd=4.0V, Id=1000mA
XP1080-QU-0N00: Input Return Loss (S11)
Vd=4.0V, Id=1000mA
30
28
26
24
22
20
18
16
14
12
10
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-22
-24
-26
-28
-30
37
37.5
38
38.5
39
39.5
40
37
37.5
38
38.5
39
39.5
40
Frequency (GHz)
Frequency (GHz)
XP1080-QU-0N00: Output Return Loss (S22)
Vd=4.0V, Id=1000mA
XP1080-QU-0N00: Reverse Isolation (S12)
Vd=4.0V, Id=1000mA
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-22
-24
-26
-28
-30
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
-50
-55
-60
-65
-70
37
37.5
38
38.5
39
39.5
40
37
37.5
38
38.5
39
39.5
40
Frequency (GHz)
Frequency (GHz)
XP1080-QU-0N00; Output IP3 vs Freq
Vd=4V, Id=1000mA
XP1080-QU-0N00; C/I3 vs Freq
Pscl=14dBm, Vd=4V, Id=1000mA
60
58
56
54
52
50
48
46
44
42
40
46
44
42
40
38
36
34
32
30
37
37.5
38
38.5
39
39.5
40
37
37.5
38
38.5
39
39.5
40
Frequency (GHz)
Frequency (GHz)
Page 2 of 6
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
37.0-40.0 GHz GaAs Power Amplifier
QFN, 7x7mm
January 2010 - Rev 22-Jan-10
P1080-QU
Power Amplifier Measurements (cont.)
XP1080-QU: P1dB vs Freq
Vd=4V, Id=1000mA
XP1080-QU: Psat vs Freq
Vd=4V, Id=1000mA
30
29.5
29
28.5
30
29.5
29
28.5
28
27.5
27
28
27.5
27
26.5
26
26.5
26
25.5
25
25.5
25
37
37.5
38
38.5
39
39.5
40
37
37.5
38
38.5
39
39.5
40
Frequency (GHz)
Frequency (GHz)
XP1080-QU: Detector Output (Diff) vs Freq
Vd=4V, Id=1000mA, Vdet/ref Bias = +5V/100k
10000
1000
100
37GHz
38.25GHz
39.5GHz
10
0
5
10
15
20
25
30
Pout (dBm)
Page 3 of 6
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
37.0-40.0 GHz GaAs Power Amplifier
QFN, 7x7mm
January 2010 - Rev 22-Jan-10
P1080-QU
Physical Dimensions/Layout
Pin
Pin
Pin Function
Nominal Value
Number Name
1
2
3
4
RF IN RF Input
0
QU
VG1 Gate bias, Stage 1
VG2 Gate bias, Stage 2
VG3 Gate bias, Stage 3
-0.3 V, 700k
-0.3 V, 700k
-0.3 V, 600k
.
.
.
5,6
7
NC
Not Connected
+5.0 V thru
Detector reference
output
Vref
100k (2.5M
)
+5.0 V thru
100k (2.5M
8
Vdet Detector output
)
RF
9
RF Output
OUT
>1M
+4.0 V, 533mA,
0.9
10
11
12
VD3 Drain bias for stage 3
VD2 Drain bias for stage 2
VD1 Drain bias for stage 1
+4.0 V, 267mA,
1.1
+4.0 V, 200mA,
1.6
13,14
15
NC
Not Connected
Not Connected
Not Connected
PDC
PDA
16
Functional Block Diagram/Board Layout
PDA PDC NC NC
Bypass Capacitors - See App Note [2]
VD1 VD2 VD3
1
9
RF IN
RF OUT
NC
NC
VG1 VG2 VG3
Vref Vdet
Page 4 of 6
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
37.0-40.0 GHz GaAs Power Amplifier
QFN, 7x7mm
January 2010 - Rev 22-Jan-10
P1080-QU
App Note [1] Biasing - It is recommended to bias the amplifier with Vd=4.0V and Id=1000mA. It is also recommended to use active biasing
to keep the currents constant as the RF power and temperature vary; this gives the most reproducible results. Depending on the supply
voltage available and the power dissipation constraints, the bias circuit may be a single transistor or a low power operational amplifier, with a
low value resistor in series with the drain supply used to sense the current.The gate of the pHEMT is controlled to maintain correct drain
current and thus drain voltage.The typical gate voltage needed to do this is -0.3V.Typically the gate is protected with Silicon diodes to limit
the applied voltage. Also, make sure to sequence the applied voltage to ensure negative gate bias is available before applying the positive
drain supply.
App Note [2] Bias Arrangement -
Each DC pin (Vd1,2,3 and Vg1,2,3) needs to have DC bypass capacitance (10 nF/1 uF) as close to the package as possible.
App Note [3] Power Detector - As shown in the schematic below, the power detector is implemented by providing +5V bias and measuring
the difference in output voltage with standard op-amp in a differential mode configuration.
MTTF
XP1080-QK-0N00: MTTF hours vs Package Base Temperature
XP1080-QK-0N00: Tch(max) vs Package Base Temperature
XP1080-QK-0N00: Operating Power De-rating Curve
(continuous)
Vd=4V, Id=1000mA
Vd=4V, Id=1000mA
200
1.0E+14
8
7
6
5
4
3
2
1
0
1.0E+13
1.0E+12
1.0E+11
1.0E+10
1.0E+09
1.0E+08
1.0E+07
1.0E+06
1.0E+05
1.0E+04
1.0E+03
175
150
125
100
75
50
25
50
75
100
125
150
175
20
30
40
50
60
70
80
90
100 110
120
130
20
30
40
50
60
70
80
90
100 110 120 130
Package Base Temp (ºC)
Package Base Temp (ºC)
Package Base Temp (ºC)
Typical Application
IF IN
PA + DET
TX
DRIVER
DIPLEXER
DET
TX Filter
(if required)
X2
XU1019-QH
XB1014-QT
XP1080-QU
LO
Page 5 of 6
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
37.0-40.0 GHz GaAs Power Amplifier
QFN, 7x7mm
January 2010 - Rev 22-Jan-10
P1080-QU
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the
environment. For safety, observe the following procedures:
• Do not ingest.
• Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these
by-products are dangerous to the human body if inhaled, ingested, or swallowed.
• Observe government laws and company regulations when discarding this product.This product must be discarded in
accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or
systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life
support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain
life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or
system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its
safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible
with high volume solder installation.Vacuum tools or other suitable pick and place equipment may be used to pick and place this
part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground
connections are maintained.Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and
life of the product due to thermal stress.
Typical Reflow Profiles
Reflow Profile
SnPb
Pb Free
Ramp Up Rate
3-4 ºC/sec
60-120 sec @ 140-160 ºC
60-150 sec
240 ºC
3-4 ºC/sec
Activation Time and Temperature
Time Above Melting Point
Max Peak Temperature
Time Within 5 ºC of Peak
Ramp Down Rate
60-180 sec @ 170-200 ºC
60-150 sec
265 ºC
10-20 sec
10-20 sec
4-6 ºC/sec
4-6 ºC/sec
Factory Automation and Identification
Mimix
Designator
Package
Type
Number of
leads offered
W Tape
Width
P1 Component P0 Hole
Reel
Diameter
Units
per Reel
Pitch
Pitch
-QU
QFN (7x7mm)
16mm
28
12mm
4mm
329mm (13in)
1000
Component Orientation:
Parts are to be oriented with the PIN 1 closest to the tape's round sprocket holes on the tape’s trailing edge.
Note:Tape and Reel packaging is ordered with a -0N0T suffix. Package is available in 500 unit reels through designated sales channels.
Minimum order quantities should be discussed with your local sales representative.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant
components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is
100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as
well as higher temperature (260°C reflow)“Pb Free”processes.
Ordering Information
Part Number for Ordering
XP1080-QU-0N00
Description
Ni/Au plated RoHS compliant 7x7 28L surface mount package in bulk quantity
Ni/Au plated RoHS compliant 7x7 28L surface mount package in tape and reel
XP1080-QU evaluation board
XP1080-QU-0N0T
XP1080-QU-EV1
Caution: ESD Sensitive
Appropriate precautions in handling, packaging
and testing devices must be observed.
Proper ESD procedures should be followed when handling this device.
Page 6 of 6
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
相关型号:
XP1101
Small Signal Bipolar Transistor, 0.03A I(C), 40V V(BR)CEO, 2-Element, PNP, Silicon,
PANASONIC
XP1101TX
Small Signal Bipolar Transistor, 0.03A I(C), 40V V(BR)CEO, 2-Element, PNP, Silicon,
PANASONIC
XP1110TX
Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 2-Element, PNP, Silicon
PANASONIC
XP1111TX
Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 2-Element, PNP, Silicon
PANASONIC
XP1112TX
Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 2-Element, PNP, Silicon
PANASONIC
XP1113TX
Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 2-Element, PNP, Silicon
PANASONIC
©2020 ICPDF网 联系我们和版权申明