XR1011-QH_09 [MIMIX]
4.5-10.5 GHz GaAs Receiver; 4.5-10.5 GHz的砷化镓接收器型号: | XR1011-QH_09 |
厂家: | MIMIX BROADBAND |
描述: | 4.5-10.5 GHz GaAs Receiver |
文件: | 总7页 (文件大小:813K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
4.5-10.5 GHz GaAs Receiver
QFN, 4x4mm
December 2009 - Rev 14-Dec-09
R1011-QH
Features
Integrated LNA, Mixer and LO Buffer Amplifier
1.8 dB Noise Figure
13.0 dB Conversion Gain
4x4mm QFN Package
100% RF, DC and NF Testing
Absolute Maximum Ratings1
General Description
Supply Voltage (Vdd)
Supply Current (Idd)
Gate Voltage (Vgg)
+4.3 VDC
Mimix Broadband’s 4.5-10.5 GHz QFN packaged receiver has
a noise figure of 1.8 dB and 13.0 dB conversion gain across
the band. The device integrates an LNA, image reject mixer
and LO buffer amplifier within a fully molded 4x4mm QFN
package.The image reject mixer eliminates the need for a
bandpass filter after the LNA to remove thermal noise at the
image frequency. I and Q mixer outputs are provided and an
external 90 degree hybrid is required to select the desired
sideband.This device uses Mimix Broadband’s GaAs PHEMT
device model technology, and is based upon electron beam
lithography to ensure high repeatability and uniformity.This
device is well suited for Point-to-Point Radio, LMDS, SATCOM
and VSAT applications.
180 mA
-3 V
Max Power Dissipation (Pdiss) 750 mW
RF Input Power (Pin)
LO Input Power (Pin)
+14 dBm
+15 dBm
Operating Temperature (Ta) -55 to +85 ºC
Storage Temperature (Tstg) -65 to +150 ºC
Channel Temperature (Tch) -40 to MTTF Graph2
MSL Level (MSL)
MSL3
ESD - Human Body Model
ESD - Machine Model
Class 1A
Class A
(1) Operation of this device above any one of these parameters
may cause permanent damage
(2) Channel temperature directly affects a device’s MTTF. Channel
temperature should be kept as low as possible to maximize lifetime
Electrical Characteristics (AmbientTemperatureT = 25 oC)
Parameter
Frequency Range (RF/LO)
Units
GHz
GHz
dB
Min.
4.5
DC
12.0
Typ.
-
-
13.0
1.8
+3.0
20.0
+5.0
-50
10
Max.
10.5
3.5
Frequency Range (IF)
Conversion Gain (CG)
Noise Figure (NF)
Input Third Order Intercept (IIP3)
Image Rejection
15.0
dB
dBm
dBc
dBm
dB
dB
dB
15.0
LO Input Drive
LO/RF Isolation
RF Input Return Loss
LO Input Return Loss
IF Return Loss
10
10
dB
Drain Bias Voltage (Vd1,2,3)
Gate Bias Voltage (Vg1,2,3)*
Gate Bias Voltage (Vg4)**
Supply Current (Id1)
Supply Current (Id2)
Supply Current (Id3)
VDC
VDC
VDC
mA
mA
mA
mA
+4.0
-0.3
-2.0
25
45
60
+4.0
0.2
-
-1.2
-
Supply Current (Ig4)
*Vg1,2 and 3 are adjusted to achieve constant drain current regulation.
2
**Vg4 provides mixer bias and is fixed at -2.0V.
Page 1 of 7
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
4.5-10.5 GHz GaAs Receiver
QFN, 4x4mm
December 2009 - Rev 14-Dec-09
R1011-QH
Receiver Measurements
XR1011-QH: USB Conversion Gain (dB)
4V @ 130mA, PLO=5dBm
XR1011-QH: USB Conversion Gain (dB)
4V @ 130mA, PLO=5dBm
20
18
16
14
20
18
16
14
12
10
8
12
USB +25C
LSB +25C
LSB -40C
LSB +80C
USB -40C
USB +80C
10
8
6
4
2
0
6
4
2
0
4
5
6
7
8
9
10
11
12
4
5
6
7
8
9
10
11
12
RF USB (GHz) [IF=1GHz]
RF LSB (GHz) [IF=1GHz]
XR1011-QH: USB Noise Figure
4V @ 130mA, PLO=5dBm
XR1011-QH: USB Noise Figure
4V @ 130mA, PLO=5dBm
10.0
10.0
9.0
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
9.0
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
+25C
-40C
+85C
+25C
-40C
+85C
4
5
6
7
8
9
10
11
12
4
5
6
7
8
9
10
11
12
RF USB (GHz) [IF=1GHz]
RF LSB (GHz) [IF=1GHz]
XR1011-QH: USB IIP3 (dBm).
4V @ 130mA, PLO=5dBm, RF = -18 dBm per Tone
XR1011-QH: LSB IIP3 (dBm)
4V @ 130mA, PLO=5dBm, RF = -18 dBm per Tone
20.0
15.0
10.0
5.0
20.0
15.0
10.0
5.0
USB +25C
USB +80C
USB -40C
LSB +25C
LSB +80C
LSB -40C
0.0
0.0
-5.0
-10.0
-5.0
-10.0
4
5
6
7
8
9
10
11
12
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
RF USB (GHz) [IF=1GHz]
RF LSB (GHz) [IF=1GHz]
Page 2 of 7
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
4.5-10.5 GHz GaAs Receiver
QFN, 4x4mm
December 2009 - Rev 14-Dec-09
R1011-QH
Receiver Measurements (cont.)
XR1011-QH : Conversion Gain (dB) vs IF (GHz) at LO=7.5 GHz
4V @ 130mA, PLO=5dBm
XR1011-QH: USB and LSB Image Rejection (dBc)
4V @ 130mA, PLO=5dBm
20
18
16
14
12
10
8
0
-5
-10
LSB +25C
-15
LSB -40C
USB
LSB
LSB +80C
-20
USB +25C
USB -40C
-25
USB +80C
6
-30
-35
-40
4
2
0
0.5
1.0
1.5
2.0
2.5
3.0
4
5
6
7
8
9
10
11
12
IF (GHz)
RF (GHz) [IF=1GHz]
XR1011-QH : Noise Figure (dB) vs IF (GHz) at LO=7.5 GHz
4V @ 130mA, PLO=5dBm
XR1011-QH: LSB Conversion Gain (dB) vs. RF (GHz).
4 V @ 130 mA
10.0
9.0
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
20
18
16
14
12
10
8
PLO = 3 dBm
PLO = 5 dBm
PLO = 7 dBm
USB +25C
LSB +25C
6
4
2
0
5
5.5
6
6.5
7
7.5
8
8.5
9
9.5
10
RF (GHz) [IF = 1 GHz]
0.5
1.0
1.5
2.0
2.5
3.0
3.5
IF (GHz)
XR1011-QH: LSB IIP3 (dBm) vs. RF (GHz).
4 V @ 130 mA
XR1011-QH: USB Conversion Gain (dB) vs. RF (GHz).
4 V @ 130 mA
16
20
18
16
14
12
10
8
14
12
10
8
PLO = 3 dBm
PLO = 5 dBm
PLO = 7 dBm
PLO = 3 dBm
PLO = 5 dBm
PLO = 7 dBm
6
4
2
6
0
4
-2
-4
2
0
5
5.5
6
6.5
7
7.5
8
8.5
9
9.5
10
5
5.5
6
6.5
7
7.5
8
8.5
9
9.5
10
RF (GHz) [IF = 1 GHz]
RF (GHz) [IF = 1 GHz]
Page 3 of 7
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
4.5-10.5 GHz GaAs Receiver
QFN, 4x4mm
December 2009 - Rev 14-Dec-09
R1011-QH
Receiver Measurements (cont.)
XR1011-QH: LO/RF Isolation (dB) vs. RF (GHz).
4V @ 130mA, PLO = 5dBm
XR1011-QH: USB IIP3 (dBm) vs. RF (GHz).
4 V @ 130 mA
0
-10
-20
-30
-40
-50
-60
-70
-80
16
14
12
10
8
PLO = 3 dBm
PLO = 5 dBm
PLO = 7 dBm
6
4
2
0
-2
-4
5
7
9
11
13
15
17
19
21
23
25
5
5.5
6
6.5
7
7.5
8
8.5
9
9.5
10
RF (GHz)
RF (GHz) [IF = 1 GHz]
LO Harmonics
MxN Spurious Outputs
nLO
2
nLO Spur, RF Port
LO Freq
(GHz)
0
-
1
33
0
65
105
>110
3
4
61
-
72
79
45
1
2
70
71
66
102
74
54
45
40
3
4
0
1
2
3
4
38
71
17
79
108
49
74
80
30
88
4
5
6
7
8
53
57
54
50
49
51
50
48
70
79
67
61
61
71
72
62
88
64
64
81
67
70
80
64
48
30
66
97
>110
mRF
9
RF=7.5GHz @ -10dBm
LO=6.5GHz @ +5dBm
10
11
12
Data measured without 90deg hybrid
All values in dBc below IF power level
53
42
64
LO = +5 dBm
Values in dBc relative to LO input level, measured at RF IN port
MTTF
XR1011-QH: MTTF (hours) vs. Backplate Temp (°C)
1.0E+12
1.0E+11
1.0E+10
1.0E+09
1.0E+08
1.0E+07
1.0E+06
1.0E+05
0
20
40
60
80
100
120
140
Backplate Temp (°C)
MTTF is calculated from accelerated life-time data of single devices and
assumes an isothermal back-plate.
Page 4 of 7
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
4.5-10.5 GHz GaAs Receiver
QFN, 4x4mm
December 2009 - Rev 14-Dec-09
R1011-QH
Package Dimensions / Layout
Functional Block Diagram
NC
NC
LO
NC
NC VG3
Pin Designations
Pin Number Pin Name Pin Function
Nominal Value
To Hybrid 0º (LSB)
To Hybrid 90º (USB)
To Hybrid 90º (LSB)
To Hybrid 0º (USB)
2
IF1
IF1 Output
1
2
3
4
5
6
18
17
16
15
14
13
NC
IF1
NC
NC
IF2
NC
VD3
VG4
NC
5
IF2
IF2 Output
BUF
9
12
13
14
15
17
18
19
22
RF
RF Input
Gate 1 Bias
Drain 1 Bias
Gate 2 Bias
Drain 2 Bias
Gate 4 Bias
Drain 3 Bias
Gate 3 Bias
LO Input
VG1
VD1
VG2
VD2
VG4
VD3
VG3
LO
-0.3V
4.0V, 25 mA
-0.3V
4.0V, 45 mA
-2.0V, 2 mA
4.0V, 60 mA
-0.3V
IRM
I
Q
VD2
VG2
VD1
LNA
+5.0 dBm
1,3,4,6,7,8,10,
11,16,20,21,
23,24
N/C*
No Connect
7
8
9
*It is recommended to externally ground all N/C pins.
NC
NC
RF
NC
NC
VG1
Page 5 of 7
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
4.5-10.5 GHz GaAs Receiver
QFN, 4x4mm
December 2009 - Rev 14-Dec-09
R1011-QH
App Note [1] Biasing - As shown in the Pin Designations table, the device is operated by biasing VD1,2,3 at 4.0V with 25, 45, 60mA respectively.
Additionally, a fixed voltage bias of -2V is required for mixer bias. It is recommended to use active bias to keep the currents constant in order to
maintain the best performance over temperature. Depending on the supply voltage available and the power dissipation constraints, the bias circuit
may be a single transistor or a low power operational amplifier, with a low value resistor in series with the drain supply used to sense the current.
The gate of the pHEMT is controlled to maintain correct drain current and thus drain voltage.The typical gate voltage needed to do this is -0.3V.
Make sure to sequence the applied voltage to ensure negative gate bias is available before applying the positive drain supply.
App Note [2] Board Layout - As shown in the board layout, it is recommended to provide 100pF decoupling caps as close to the bias pins as
possible, with additional 10µF decoupling caps.
Recommended Board Layout
Recommended Decoupling Capacitors:
100pF 0402,
10µF 0805
Recommend to externally ground all N/C pins
Page 6 of 7
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
4.5-10.5 GHz GaAs Receiver
QFN, 4x4mm
December 2009 - Rev 14-Dec-09
R1011-QH
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the
environment. For safety, observe the following procedures:
• Do not ingest.
• Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these
by-products are dangerous to the human body if inhaled, ingested, or swallowed.
• Observe government laws and company regulations when discarding this product.This product must be discarded in
accordance with methods specified by applicable hazardous waste procedures.
Electrostatic Sensitive Device -
Observe all necessary precautions when handling.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or
systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life
support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain
life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or
system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its
safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible
with high volume solder installation. Vacuum tools or other suitable pick and place equipment may be used to pick and place this
part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground
connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and
life of the product due to thermal stress.
Typical Reflow Profiles
Reflow Profile
SnPb
Pb Free
Ramp Up Rate
3-4 ºC/sec
60-120 sec @ 140-160 ºC
60-150 sec
240 ºC
3-4 ºC/sec
Activation Time and Temperature
Time Above Melting Point
Max Peak Temperature
Time Within 5 ºC of Peak
Ramp Down Rate
60-180 sec @ 170-200 ºC
60-150 sec
265 ºC
10-20 sec
10-20 sec
4-6 ºC/sec
4-6 ºC/sec
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant
components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is
100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as
well as higher temperature (260°C reflow) “Pb Free” processes.
Part Number for Ordering
XR1011-QH-0GP0
XR1011-QH-0GPT
Description
Matte Tin plated RoHS compliant 4x4 24L QFN surface mount package in bulk quantity
Matte Tin plated RoHS compliant 4x4 24L QFN surface mount package in tape and reel
XR1011-QH evaluation board
XR1011-QH-EV1
Caution: ESD Sensitive
Appropriate precautions in handling, packaging
and testing devices must be observed.
Proper ESD procedures should be followed when handling this device.
Page 7 of 7
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
相关型号:
©2020 ICPDF网 联系我们和版权申明