XR1015-QH-EV1 [MIMIX]
10.0-16.0 GHz GaAs Receiver QFN, 4x4mm; 10.0-16.0 GHz的砷化镓接收QFN封装，采用4x4mm
| 型号： | XR1015-QH-EV1 |
| 厂家： | 
MIMIX BROADBAND |
| 描述： | 10.0-16.0 GHz GaAs Receiver QFN, 4x4mm |
| 文件： | 总9页 (文件大小：461K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
10.0-16.0 GHz GaAs Receiver
QFN, 4x4mm
August 2009 - Rev 28-Aug-09
R1015-QH
Features
Integrated LNA, Mixer and LO Buffer Amplifier
2.5 dB Noise Figure
12.0 dB Conversion Gain
4x4mm QFN Package
100% RF, DC and NF Testing
Absolute Maximum Ratings1
Supply Voltage (Vd1,2,3)
Supply Current (Id1,2,3)
Gate Bias Voltage (Vg1,2,3)
Gate Bias Voltage (Vg4)
Input Power (RF)
+4.3V
General Description
200 mA
Mimix Broadband’s 10.0-16.0 GHz QFN packaged
receiver has a noise figure of 2.5 dB and 12.0 dB
conversion gain.The device integrates an LNA, image
reject mixer and LO buffer amplifier within a fully
molded 4x4mm QFN package.The image reject mixer
eliminates the need for a bandpass filter after the LNA
to remove thermal noise at the image frequency. I and Q
mixer outputs are provided and an external 90 degree
hybrid is required to select the desired sideband.This
device uses Mimix Broadband’s GaAs PHEMT device
model technology, and is based upon electron beam
lithography to ensure high repeatability and uniformity.
This device is well suited for Point-to-Point Radio, LMDS,
SATCOM and VSAT applications.
-1.7V min., 0V max.
-4 V
+10 dBm
LO Power (LO)
+12 dBm
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
ESD Min. Machine Model (MM)
-65 to +150 ºC
-55 to +85 ºC
-40 to MTTF Graph2
Class A
ESD Min. Human Body Model (HBM) Class 1A
Moisture Sensitivity Level MSL3
(1) Operation of this device above any one of these parameters may cause
permanent damage.
(2) Channel temperature directly affects a device’s MTTF. Channel
temperature should be kept as low as possible to maximize lifetime.
Electrical Characteristics (AmbientTemperatureT = 25 oC)
Parameter
Frequency Range (RF)
Frequency Range (LO)
Frequency Range (IF)
Conversion Gain (CG)
Noise Figure (NF)
Input Third Order Intercept (IIP3)
Image Rejection
LO Input Drive
Units
GHz
GHz
GHz
dB
Min.
10.0
7.0
DC
10.0
Typ.
-
-
Max.
16.0
19.0
3.5
17.0
3.3
-
12.0
2.5
2
dB
dBm
dBc
dBm
dB
dB
dB
-7
15.0
0.0
20.0
5.0
-50.0
10.0
10.0
10.0
4.0
-0.3
-3.0
30
10.0
LO/RF Isolation
RF Input Return Loss
LO Input Return Loss
IF Return Loss
Drain Bias Voltage (Vd1,2,3)
Gate Bias Voltage (Vg1,2,3)*
Gate Bias Voltage (Vg4)**
Supply Current (Id1)
Supply Current (Id2)
Supply Current (Id3)
dB
VDC
VDC
VDC
mA
mA
mA
mA
3.7
-1.5
-3.8
4.0
-0.1
-2.0
60
80
1.5
Supply Current (Ig4)
*Vg1,2 and 3 are adjusted to achieve constant drain current regulation.
**Vg4 provides mixer bias and is fixed at -3.0V.
Page 1 of 9
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
10.0-16.0 GHz GaAs Receiver
QFN, 4x4mm
August 2009 - Rev 28-Aug-09
R1015-QH
Receiver Measurements
XR1015-QH: LSB Conv. Gain vs Freq , Over Temp
Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm
XR1015-QH: USB Conv. Gain vs Freq , Over Temp
Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm
22
22
20
18
16
14
12
10
8
20
+25C
-40C
+85C
+25C
18
16
14
12
10
8
-40C
+85C
6
6
4
4
2
2
0
0
8
10
12
14
16
18
8
10
12
14
16
18
Frequency (GHz)
Frequency (GHz)
XR1015-QH: LSB Noise figure vs Freq , Over Temp
XR1015-QH: USB Noise figure vs Freq , Over Temp
Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm
Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm
8
7
6
5
4
3
2
1
0
8
7
6
5
4
3
2
1
0
+25C
-40C
+85C
+25C
-40C
+85C
8
10
12
14
16
18
8
10
12
14
16
18
Frequency (GHz)
Frequency (GHz)
XR1015-QH: LSB IIP3 vs Freq , Over Temp
XR1015-QH: USB IIP3 vs Freq , Over Temp
Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm
Pin/tone=-20dBm
Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm
Pin/tone=-20dBm
14
14
12
10
8
12
10
8
+25C
-40C
+85C
+25C
-40C
+85C
6
6
4
4
2
2
0
0
-2
-4
-6
-8
-10
-2
-4
-6
-8
-10
8
10
12
14
16
18
8
10
12
14
16
18
Frequency (GHz)
Frequency (GHz)
Page 2 of 9
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
10.0-16.0 GHz GaAs Receiver
QFN, 4x4mm
August 2009 - Rev 28-Aug-09
R1015-QH
Receiver Measurements (cont.)
XR1015-QH: LSB Image Rejection vs Freq , Over Temp
Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm
0
XR1015-QH: USB Image Rejection vs Freq , Over Temp
Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm
0
-5
-5
+25C
+25C
-40C
+85C
-40C
+85C
-10
-15
-10
-15
-20
-25
-30
-35
-20
-25
-30
-35
8
10
12
14
16
18
8
10
12
14
16
18
Frequency (GHz)
Frequency (GHz)
XR1015-QH: LSB Conv. Gain vs IF Freq , 25degC
XR1015-QH: USB Conv. Gain vs IF Freq , 25degC
Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,LO=5dBm
Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,LO=5dBm
20
18
16
14
12
10
8
20
1GHz
2GHz
3GHz
18
16
14
12
10
8
1GHz
2GHz
3GHz
6
6
4
4
2
2
0
0
8
10
12
14
16
18
8
10
12
14
16
18
Frequency (GHz)
Frequency (GHz)
XR1015-QH: USB Conv. Gain vs LO Power , 25degC
Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz
XR1015-QH: LO & RF Return Loss (dB) vs. RF (GHz).
VD1,2,3 = 4 V, ID1+ID2 = 80 mA , ID3 = 70 mA, VG4 = - 3 V
0
20
18
16
14
12
10
8
-2.5
-5
LO=0dBm
LO=5dBm
LO=10dBm
-7.5
-10
-12.5
-15
RF RL
LO RL
-17.5
-20
6
4
-22.5
-25
2
0
5
10
15
20
RF (GHz)
25
30
35
40
8
10
12
14
16
18
Frequency (GHz)
Page 3 of 9
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
10.0-16.0 GHz GaAs Receiver
QFN, 4x4mm
August 2009 - Rev 28-Aug-09
R1015-QH
Receiver Measurements (cont.)
XR1015-QH: USB Noise Figure vs Freq, Varying Vd1,2,3
XR1015-QH: Port Leakage vs Freq
Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm
22
Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz
LO=+5dBm,Pin=-20dBm
0
-10
-20
-30
-40
-50
-60
20
18
RF-IF
LO-IF
LO-RF
Vd1,2,3=3V
16
Vd1,2,3=4V
14
Vd1,2,3=5V
12
10
8
6
4
2
0
8
10
12
14
16
18
8
10
12
14
16
18
Frequency (GHz)
Frequency (GHz)
XR1015-QH: USB Conv. Gain vs Freq, Varying Vd1,2,3
Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm
XR1015-QH: USB Conv. Gain vs Freq, Varying Id1,2,3
Vd1,2,3=4V,Vg4=-3V,IF=2GHz,LO=+5dBm
22
20
18
16
14
12
10
8
22
20
18
16
14
12
10
8
Id=40/80/110mA
Id=30/60/80mA
Id=20/40/55mA
Vd1,2,3=3V
Vd1,2,3=4V
Vd1,2,3=5V
6
6
4
4
2
2
0
0
8
10
12
14
16
18
8
10
12
14
16
18
Frequency (GHz)
Frequency (GHz)
XR1015-QH: USB IIP3 vs Freq, Varying Vd1,2,3
Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm
Pin=-20dBm/tone
XR1015-QH: USB IIP3 vs Freq, Varying Id1,2,3
Vd1,2,3=4V,Vg4=-3V,IF=2GHz,LO=+5dBm,Pin=-20dBm/tone
14
14
12
10
8
12
10
8
6
6
4
4
2
2
0
0
-2
-4
-6
-8
-10
-2
-4
-6
-8
-10
Vd1,2,3=3V
Vd1,2,3=4V
Vd1,2,3=5V
Id=40/80/110mA
Id=30/60/80mA
Id=20/40/55mA
8
10
12
14
16
18
8
10
12
14
16
18
Frequency (GHz)
Frequency (GHz)
Page 4 of 9
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
10.0-16.0 GHz GaAs Receiver
QFN, 4x4mm
August 2009 - Rev 28-Aug-09
R1015-QH
Receiver Measurements (cont.)
XR1015-QH: LO/RF Isolation (dB) vs. RF (GHz).
VD1,2,3 = 4 V, ID1+ID2 = 80 mA , ID3 = 70 mA, VG4 = - 3 V (1.5 mA)
0
-5
-10
-15
-20
-25
LO-RF
-30
-35
-40
-45
-50
-55
-60
5
10
15
20
25
30
35
40
RF (GHz)
MTTF
XR1015-QH: MTTF (hours) vs. Backplate Temp (°C)
1.00E+13
1.00E+12
1.00E+11
1.00E+10
1.00E+09
1.00E+08
1.00E+07
1.00E+06
MTTF (hours)
0
20
40
60
80
100
120
140
Backplate Temp (°C)
MTTF is calculated from accelerated life-time data of single devices and assumes an isothermal back-plate.
Page 5 of 9
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
10.0-16.0 GHz GaAs Receiver
QFN, 4x4mm
August 2009 - Rev 28-Aug-09
R1015-QH
Package Dimensions / Layout
Pin Designations
Functional Block Diagram
Pin Number Pin Name Pin Function
Nominal Value
To Hybrid 90º (LSB)
To Hybrid 0º (USB)
NC GND
LO GND NC VG3
2
IF1
IF1 Output
(1.8 )
To Hybrid 0º (LSB)
To Hybrid 90º (USB)
1
2
3
4
5
6
18
17
16
15
14
13
GND
IF1
VD3
VG4
NC
5
9
12
13
14
15
17
18
19
IF2
RF
IF2 Output
RF Input
Gate 1 Bias
Drain 1 Bias
Gate 2 Bias
Drain 2 Bias
(1.8 )
(>2M )
-0.3V (1M
4.0V, 30 mA (27.5
-0.3V (1M
4.0V, 60 mA (14
BUF
VG1
VD1
VG2
VD2
VG4
VD3
VG3
LO
)
)
)
)
IRM
I
NC
)
Gate 4 Bias -3.0V, 1.5 mA (1980
)
Q
Drain 3 Bias
Gate 3 Bias
LO Input
4.0V, 80 mA (14.4
VD2
NC
-0.3V (1M )
(>2M )
22
IF2
VG2
VD1
3,4,7,11,16,
20,24
1,6,8,10,21,
23
LNA
N/C* Not Connected
GND Ground
GND
*It is recommended to externally ground all N/C pins.
7
8
9
NC GND
RF GND NC
VG1
Page 6 of 9
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
10.0-16.0 GHz GaAs Receiver
QFN, 4x4mm
August 2009 - Rev 28-Aug-09
R1015-QH
App Note [1] Biasing - As shown in the Pin Designations table, the device is operated by biasing VD1,2,3 at 4.0V with 30, 60, 80mA respectively.
Additionally, a fixed voltage bias of -3V is required for mixer bias. It is recommended to use active bias to keep the currents constant in order to
maintain the best performance over temperature. Depending on the supply voltage available and the power dissipation constraints, the bias circuit
may be a single transistor or a low power operational amplifier, with a low value resistor in series with the drain supply used to sense the current.
The gate of the pHEMT is controlled to maintain correct drain current and thus drain voltage.The typical gate voltage needed to do this is -0.3V.
Make sure to sequence the applied voltage to ensure negative gate bias is available before applying the positive drain supply.
App Note [2] Board Layout - As shown in the board layout, it is recommended to provide 100pF decoupling caps as close to the bias pins as
possible, with additional 10µF decoupling caps.
Recommended Board Layout
Recommended Decoupling Capacitors:
100pF 0402,
10µF 0805
Recommend to externally ground all N/C pins
Page 7 of 9
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
10.0-16.0 GHz GaAs Receiver
QFN, 4x4mm
August 2009 - Rev 28-Aug-09
R1015-QH
MxN SpuriousTables
nLO
0
1
2
3
4
mRF
0
1
2
3
4
-
-32
0
-50
-65
-56
-42
-28
-13
-56
-49
-48
-56
-13
-28
-43
-55
-66
-50
0
-26
-62
-64
-71
-33
RF=10 GHz @ -10 dBm
LO=8 GHz @ +5 dBm
Data measured without 90deg hybrid
All values in dBc below IF power level
nLO
0
1
2
3
4
mRF
0
1
2
3
4
-
-40
0
-45
-65
-64
-35
-58
-17
-35
-55
-55
-62
-55
-35
-17
-57
-71
-64
-65
-45
-27
-59
-67
-77
Data measured without 90deg hybrid
All values in dBc below IF power level
RF=10 GHz @ -10 dBm
LO=12 GHz @ +5 dBm
nLO
0
-
-28
-81
-
1
-31
0
-63
-78
-
2
3
4
mRF
0
1
2
3
4
-28
-63
-20
-71
-
-56
-62
-65
-48
-78
-
-80
-78
-69
-69
-
Data measured without 90deg hybrid
All values in dBc below IF power level
RF=16 GHz @ -10 dBm
LO=14 GHz @ +5 dBm
nLO
0
-
-26
-64
-
1
-18
0
-62
-74
-
2
3
4
-
-
-77
-68
-67
mRF
0
1
2
3
4
-42
-53
-17
-62
-76
-
-58
-66
-43
-68
-
Data measured without 90deg hybrid
All values in dBc below IF power level
RF=16 GHz @ -10 dBm
LO=18 GHz @ +5 dBm
Page 8 of 9
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
10.0-16.0 GHz GaAs Receiver
QFN, 4x4mm
August 2009 - Rev 28-Aug-09
R1015-QH
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the
environment. For safety, observe the following procedures:
• Do not ingest.
• Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these
by-products are dangerous to the human body if inhaled, ingested, or swallowed.
• Observe government laws and company regulations when discarding this product.This product must be discarded in
accordance with methods specified by applicable hazardous waste procedures.
Electrostatic Sensitive Device -
Observe all necessary precautions when handling.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or
systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life
support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain
life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or
system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its
safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible
with high volume solder installation. Vacuum tools or other suitable pick and place equipment may be used to pick and place this
part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground
connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and
life of the product due to thermal stress.
Typical Reflow Profiles
Reflow Profile
SnPb
Pb Free
Ramp Up Rate
3-4 ºC/sec
60-120 sec @ 140-160 ºC
60-150 sec
240 ºC
3-4 ºC/sec
Activation Time and Temperature
Time Above Melting Point
Max Peak Temperature
Time Within 5 ºC of Peak
Ramp Down Rate
60-180 sec @ 170-200 ºC
60-150 sec
265 ºC
10-20 sec
10-20 sec
4-6 ºC/sec
4-6 ºC/sec
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant
components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is
100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as
well as higher temperature (260°C reflow) “Pb Free” processes.
Part Number for Ordering
XR1015-QH-0G00
XR1015-QH-0G0T
Description
Matte Tin plated RoHS compliant 4x4 24L QFN surface mount package in bulk quantity
Matte Tin plated RoHS compliant 4x4 24L QFN surface mount package in tape and reel
XR1015-QH evaluation board
XR1015-QH-EV1
Caution: ESD Sensitive
Appropriate precautions in handling, packaging
and testing devices must be observed.
Proper ESD procedures should be followed when handling this device.
Page 9 of 9
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
相关型号：
©2020 ICPDF网 联系我们和版权申明