XR1019-QH-0G00 [MIMIX]
27.0-34.0 GHz GaAs Receiver QFN, 4x4mm; 27.0-34.0 GHz的砷化镓接收QFN封装，采用4x4mm
| 型号： | XR1019-QH-0G00 |
| 厂家： | 
MIMIX BROADBAND |
| 描述： | 27.0-34.0 GHz GaAs Receiver QFN, 4x4mm |
| 文件： | 总8页 (文件大小：926K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
27.0-34.0 GHz GaAs Receiver
QFN, 4x4mm
February 2010 - Rev 9-Feb-10
R1019-QH
Features
Integrated LNA, Mixer and LO Buffer Amplifier
2.5 dB Noise Figure
13.0 dB Conversion Gain
4x4mm QFN Package
100% RF, DC and NF Testing
Absolute Maximum Ratings1
Supply Voltage (Vd1,2,3)
Supply Current (Id1,2,3)
Gate Bias Voltage (Vg1,2,3)
Gate Bias Voltage (Vg4)
Input Power (RF)
+4.3V
General Description
200 mA
Mimix Broadband’s 27.0-34.0 GHz QFN packaged
receiver has a noise figure of 2.5 dB and 13.0 dB
conversion gain.The device integrates an LNA, image
reject mixer and LO buffer amplifier within a fully
molded 4x4mm QFN package.The image reject mixer
eliminates the need for a bandpass filter after the LNA
to remove thermal noise at the image frequency. I and Q
mixer outputs are provided and an external 90 degree
hybrid is required to select the desired sideband.This
device uses Mimix Broadband’s GaAs pHEMT device
model technology, and is based upon electron beam
lithography to ensure high repeatability and uniformity.
This device is well suited for Point-to-Point Radio, LMDS,
SATCOM and VSAT applications.
-1.7V min., 0V max.
-4 V
+5 dBm
LO Power (LO)
+13 dBm
-65 to +150 ºC
-55 to +85 ºC
150 ºC
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
ESD Min. Machine Model (MM)
Class A
ESD Min. Human Body Model (HBM) Class 1A
Moisture Sensitivity Level MSL3
(1) Operation of this device above any one of these parameters may cause
permanent damage.
(2) Channel temperature directly affects a device’s MTTF. Channel
temperature should be kept as low as possible to maximize lifetime.
Electrical Characteristics (AmbientTemperatureT = 25 oC)
Parameter
Frequency Range (RF)
Units
GHz
GHz
GHz
dB
Min.
27.0
12.5
DC
-
-
-
-
3.0
-
-
-
-
-
-
Typ.
-
-
-
13.0
2.5
-2
20.0
4.0
-50.0
10.0
10.0
12.0
3.0
-0.35
-3.0
7.5
30
Max.
34.0
18.0
2.0
-
-
-
-
9.0
-
-
-
-
-
-
Frequency Range (LO)
Frequency Range (IF)
Conversion Gain (CG)
Noise Figure (NF)
Input Third Order Intercept (IIP3)
Image Rejection
dB
dBm
dBc
dBm
dB
dB
dB
LO Input Drive
LO/RF Isolation
RF Input Return Loss
LO Input Return Loss
IF Return Loss
Drain Bias Voltage (Vd1,2,3)
Gate Bias Voltage (Vg1,2,3)*
Gate Bias Voltage (Vg4)**
Supply Current (Id1)
Supply Current (Id2)
Supply Current (Id3)
dB
VDC
VDC
VDC
mA
mA
mA
mA
-3.8
-2.0
-
-
-
-
-
-
-
-
90
10
Supply Current (Ig4)
*Vg1,2 and 3 are adjusted to achieve constant drain current regulation.
**Vg4 provides mixer bias and is fixed at -3.0V.
Page 1 of 8
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
27.0-34.0 GHz GaAs Receiver
QFN, 4x4mm
February 2010 - Rev 9-Feb-10
R1019-QH
Receiver Measurements
XR1019-QH: LSB Conv. Gain vs. Freq (GHz), Over Temp
Vd1,2,3=3 V;Id1=7.5mA,Id2=30mA,Id3=90mA,Vg4=-3V
XR1019-QH: USB Conv. Gain vs. Freq (GHz), Over Temp
Vd1,2,3=3 V;Id1=7.5mA,Id2=30mA,Id3=90mA,Vg4=-3V
20
20
18
16
14
12
10
8
18
16
14
12
10
8
+25C
6
6
+25C
+85C
-40C
+85C
4
4
-40C
2
0
2
0
27
28
29
30
31
32
33
34
27
28
29
30
31
32
33
34
RF Input (GHz) [IF = 1 GHz]
RF Input (GHz) [IF = 1 GHz]
XR1019-QH: LSB Noise Figure vs. Freq (GHz), Over Temp
Vd1,2,3=3 V;Id1=7.5mA,Id2=30mA,Id3=90mA,Vg4=-3V
XR1019-QH: USB Noise Figure vs. Freq (GHz), Over Temp
Vd1,2,3=3 V;Id1=7.5mA,Id2=30mA,Id3=90mA,Vg4=-3V
5
4.5
4
5
+25C
+85C
-40C
+25C
+85C
-40C
4.5
4
3.5
3
3.5
3
2.5
2
2.5
2
1.5
1
1.5
1
0.5
0
0.5
0
27
28
29
30
31
32
33
34
27
28
29
30
31
32
33
34
RF Input (GHz) [IF = 1 GHz]
RF Input (GHz) [IF = 1 GHz]
XR1019-QH: LSB IIP3 vs. Freq (GHz), Over Temp
XR1019-QH: USB IIP3 vs. Freq (GHz), Over Temp
Vd1,2,3=3 V;Id1=7.5mA,Id2=30mA,Id3=90mA,Vg4=-3V
Vd1,2,3=3 V;Id1=7.5mA,Id2=30mA,Id3=90mA,Vg4=-3V
4
2
4
2
0
0
-2
-4
-6
-8
-10
-2
-4
-6
+25C
+85C
-40C
+25C
+85C
-40C
-8
-10
27
28
29
30
31
32
33
34
27
28
29
30
31
32
33
34
RF Input (GHz) [IF = 1 GHz]
RF Input (GHz) [IF = 1 GHz]
Page 2 of 8
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
27.0-34.0 GHz GaAs Receiver
QFN, 4x4mm
February 2010 - Rev 9-Feb-10
R1019-QH
Receiver Measurements (cont.)
XR1019-QH: LSB Image Rejection vs. Freq (GHz), Over Temp
Vd1,2,3=3 V; Id1=7.5mA, Id2=30mA, Id3=90mA, Vg4=-3V
XR1019-QH: USB Image Rejection vs. Freq (GHz), Over Temp
Vd1,2,3=3 V; Id1=7.5mA, Id2=30mA, Id3=90mA, Vg4=-3V
0
0
-5
USB +25C
USB +85C
USB -40C
-5
LSB +25C
LSB +85C
-10
-10
-15
-20
-25
-30
-35
-40
-45
LSB -40C
-15
-20
-25
-30
-35
-40
-45
27
28
29
30
31
32
33
34
27
28
29
30
31
32
33
34
RF Freq (GHz) [IF = 1 GHz]
RF Freq (GHz) [IF = 1 GHz]
XR1019-QH: Conv. Gain vs IF Freq (GHz)
Vd1,2,3=3 V; Id1=7.5mA, Id2=30mA, Id3=90mA, Vg4=-3V
XR1019-QH: RF and LO Return Loss vs. Freq (GHz)
Vd1,2,3=3 V; Id1=7.5mA, Id2=30mA, Id3=90mA, Vg4=-3V
12
11
10
9
0
-5
8
-10
-15
-20
-25
-30
7
6
5
4
IF1
IF2
3
RF Return Loss
LO Return Loss
2
1
0
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44
RF Input (GHz) [IF = 1 GHz]
0
0.5
1
1.5
2
2.5
3
3.5
4
IF Freq (GHz)
XR1019-QH: USB Conv. Gain vs Freq (GHz), Varying LO Power
Vd1,2,3=3 V; Id1=7.5mA, Id2=30mA, Id3=90mA, Vg4=-3V
XR1019-QH: USB IIP3 vs Freq (GHz), Varying LO Power
Vd1,2,3=3 V; Id1=7.5mA, Id2=30mA, Id3=90mA, Vg4=-3V
16
14
12
10
8
4
2
0
-2
-4
-6
-8
PLO = 4 dBm
PLO = 6 dBm
PLO = 8 dBm
6
PLO = 4 dBm
PLO = 6 dBm
PLO = 8 dBm
4
2
0
-10
27
28
29
30
31
32
33
34
27
28
29
30
31
32
33
34
RF Freq (GHz) [IF = 1 GHz]
RF Freq (GHz) [IF = 1 GHz]
Page 3 of 8
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
27.0-34.0 GHz GaAs Receiver
QFN, 4x4mm
February 2010 - Rev 9-Feb-10
R1019-QH
Receiver Measurements (cont.)
XR1019-QH: IF Return Loss vs. Freq (GHz)
Vd1,2,3=3V; Id1=7.5mA, Id2=30mA, Id3=90mA, Vg4=-3V
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
1
1.2 1.4 1.6 1.8
2
2.2 2.4 2.6 2.8
Frequency (GHz)
3
3.2 3.4 3.6 3.8
4
Page 4 of 8
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
27.0-34.0 GHz GaAs Receiver
QFN, 4x4mm
February 2010 - Rev 9-Feb-10
R1019-QH
MTTF
XR1019-QH: MTTF vs. Backside Temp,
VD1,2,3 = 3 V, ID1,2,3 = 7.5, 30 & 90 mA. VG3 = - 3 V
1.0E+18
1.0E+17
1.0E+16
1.0E+15
1.0E+14
1.0E+13
1.0E+12
1.0E+11
1.0E+10
1.0E+09
1.0E+08
1.0E+07
0
20
40
60
80
100
120
140
Backside Temp (ºC)
XR1019-QH: Tch_max vs. Backside Temp,
VD1,2,3 = 3 V, ID1,2,3 = 7.5, 30 & 90 mA. VG3 = - 3 V
200
180
160
140
120
100
80
60
40
20
0
0
20
40
60
80
100
120
140
Backside Temp (ºC)
MTTF is calculated from accelerated life-time data of single devices and assumes an isothermal back-plate.
Page 5 of 8
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
27.0-34.0 GHz GaAs Receiver
QFN, 4x4mm
February 2010 - Rev 9-Feb-10
R1019-QH
Package Dimensions / Layout
Pin Designations
Pin Number
Pin Name
Pin Function
Nominal Value
To Hybrid 0° (USB)
To Hybrid 90° (LSB)
2
IF1
IF1 output
Functional Block Diagram
(1.4
)
GND LO GND NC VG3
To Hybrid 90° (USB)
To Hybrid 0° (LSB)
NC
5
IF2
IF2 output
(1.4
)
8
9
GND
RF IN
GND
Ground
RF input
Ground
(1
)
10
1
2
3
4
5
6
18
17
16
15
14
13
NC
IF1
NC
NC
IF2
NC
VD3
VG4
NC
-0.35V
12
13
14
15
VG1
VD1
VG2
VD2
Gate, LNA Stage 1
Drain, LNA Stage 1
Gate, LNA Stage 2
Drain, LNA Stage 2
BUF
x2
BUF
(1.2M
)
3V, 7.5mA
(145
)
I
IRM
-0.35V
Q
(1.2M
)
VD2
3V, 30mA
VG2
VD1
(17
)
LNA
-3V,10mA
(295
17
VG4
Mixer Bias
)
3V, 90mA
(4.3
-0.35V
7
8
9
18
19
VD3
VG3
Drain, LO Buffer
Gate, LO Buffer
)
NC GND RF GND NC VG1
(1.1M
)
21
22
23
GND
LO IN
GND
Ground
LO input
Ground
(1.4
)
1,3,4,6,7,11,16,20,24
NC
Not Connected
Page 6 of 8
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
27.0-34.0 GHz GaAs Receiver
QFN, 4x4mm
February 2010 - Rev 9-Feb-10
R1019-QH
App Note [1] Biasing - As shown in the Pin Designations table, the device is operated by biasing VD1,2,3 at 3.0V with 7.5, 30, 90mA respectively.
Additionally, a fixed voltage bias of -3V is required for mixer bias. It is recommended to use active bias to keep the currents constant in order to
maintain the best performance over temperature. Depending on the supply voltage available and the power dissipation constraints, the bias circuit
may be a single transistor or a low power operational amplifier, with a low value resistor in series with the drain supply used to sense the current.
The gate of the pHEMT is controlled to maintain correct drain current and thus drain voltage.The typical gate voltage needed to do this is -0.35V.
Make sure to sequence the applied voltage to ensure negative gate bias is available before applying the positive drain supply.
App Note [2] Board Layout - As shown in the board layout, it is recommended to provide 100pF decoupling caps as close to the bias pins as
possible, with additional 10µF decoupling caps.
Recommended Board Layout
Page 7 of 8
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
27.0-34.0 GHz GaAs Receiver
QFN, 4x4mm
February 2010 - Rev 9-Feb-10
R1019-QH
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the
environment. For safety, observe the following procedures:
• Do not ingest.
• Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these
by-products are dangerous to the human body if inhaled, ingested, or swallowed.
• Observe government laws and company regulations when discarding this product.This product must be discarded in
accordance with methods specified by applicable hazardous waste procedures.
Electrostatic Sensitive Device -
Observe all necessary precautions when handling.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or
systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life
support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain
life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or
system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its
safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible
with high volume solder installation. Vacuum tools or other suitable pick and place equipment may be used to pick and place this
part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground
connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and
life of the product due to thermal stress.
Typical Reflow Profiles
Reflow Profile
SnPb
Pb Free
Ramp Up Rate
3-4 ºC/sec
60-120 sec @ 140-160 ºC
60-150 sec
240 ºC
3-4 ºC/sec
Activation Time and Temperature
Time Above Melting Point
Max Peak Temperature
Time Within 5 ºC of Peak
Ramp Down Rate
60-180 sec @ 170-200 ºC
60-150 sec
265 ºC
10-20 sec
10-20 sec
4-6 ºC/sec
4-6 ºC/sec
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant
components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is
100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as
well as higher temperature (260°C reflow) “Pb Free” processes.
Part Number for Ordering
XR1019-QH-0G00
XR1019-QH-0G0T
Description
Matte Tin plated RoHS compliant 4x4 24L QFN surface mount package in bulk quantity
Matte Tin plated RoHS compliant 4x4 24L QFN surface mount package in tape and reel
XR1019-QH evaluation board
XR1019-QH-EV1
Caution: ESD Sensitive
Appropriate precautions in handling, packaging
and testing devices must be observed.
Proper ESD procedures should be followed when handling this device.
Page 8 of 8
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
相关型号：
©2020 ICPDF网 联系我们和版权申明