AVA-183A-DF+ [MINI]
Monolithic Amplifier;型号: | AVA-183A-DF+ |
厂家: | MINI-CIRCUITS |
描述: | Monolithic Amplifier 射频 微波 |
文件: | 总6页 (文件大小:324K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Wideband, Microwave
Monolithic Amplifier Die
AVA-183A-D+
50Ω
5 to 20 GHz
The Big Deal
• Ultra-wideband, 5 to 20 GHz
• Integrated matching, DC blocks, bias circuits
• Unpackaged die form
Product Overview
The AVA-183A-D+ is an ultra-wideband microwave amplifier die fabricated using InGaAs PHEMT
technology operating over extremely wide frequency range from 5 to 20 GHz. This model integrates the
entire matching network with the majority of the bias circuit, reducing the need for complicated external
circuits and simplifying board layouts. These advantages make the AVA-183A-D+ extremely user friendly
and enable simple, straightforward use.
Key Features
Feature
Advantages
Very broad frequency range supports a wide array of applications from microwave radio and
radar to military communications and countermeasures, among others.
Ultra-wideband, 5 to 20 GHz
Minimizes the need for external equalizer networks and gain flattening components, making it
a great fit for instrumentation and EW applications.
Excellent gain flatness, 1.8 dꢀ
High isolation, 32 to 43 dꢀ
Single +5V supply
With high reverse isolation (20 – 32 dꢀ directivity), the AVA-123A-D+ is an excellent choice
for buffering broadband circuits. It is an ideal LO driver amplifier and provides designers
system flexibility and margin when integrating cascaded RF components.
• No hassle associated with amplifiers using dual supply such as power supply sequencing.
• Integrated output bias-tee simplifies layout and reduces cost.
Unpackaged die
Enables the user to integrate the amplifier directly into hybrids.
®
Mini-Circuits
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 1 of 6
Wideband, Microwave
Monolithic Amplifier Die
AVA-183A-D+
Product Features
• Gain, 13.5 dꢀ typ. & Flatness, 1.8 dꢀ
• Output Power, up to +19.0 dꢀm typ.
• Excellent isolation, 39 dꢀ typ. at 12 GHz
• Single Positive Supply Voltage, 5.0V
• Integrated DC blocks, ꢀias-Tee & Microwave bypass capacitor
• Unconditionally Stable
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
Typical Applications
• Military EW and Radar
• DꢀS
Ordering Information: Refer to Last Page
• Wideband Isolation amplifier
• Microwave point-to-point radios
• Satellite systems
General Description
The AVA-183A-D+ is a wideband monolithic amplifier die fabricated using InGaAs PHEMT technology with
outstanding gain flatness up to 20 GHz. It is manufactured using PHEMT technology and is unconditionally
stable. Its outstanding isolation enables it to be used as a wideband isolation amplifier or buffer amplifier
in a variety of microwave systems.
Simplified Schematic and Pad description
DC
RF-OUT
RF-IN
Function
RF-IN
Description
RF input pad
RF-OUT
DC (VD1, VD2)
GND
RF output pad
DC power supply
Connected to ground
REV. OR
M151772
AVA-183A-D+
RS/TH/CP
160915
®
Mini-Circuits
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 2 of 6
AVA-183A-D+
Wideband Monolithic PHEMT MMIC Amplifier
Electrical Specifications(1) at 25°C, Zo=50Ω, (refer to characterization circuit, Fig.1)
Parameter
Condition (GHz)
Min.
Typ.
Max.
Units
Frequency Range
DC Voltage (VD1, VD2
DC Current (ID1+ID2)
5.0
20.0
GHz
V
mA
)
5.0
131
11.4
15.1
14.5
13.9
13.6
13.5
12.1
8.2
17.2
12.9
12.0
12.2
12.8
9.3
104
166
5.0
8.0
10.0
12.0
14.0
16.0
20.0
5.0
Gain
dꢀ
dꢀ
8.0
10.0
12.0
14.0
16.0
20.0
5.0
Input Return Loss
Output Return Loss
Output IP3 (2)
6.2
8.0
15.1
11.8
10.3
9.8
10.0
12.0
14.0
16.0
20.0
5.0
dꢀ
9.8
14.8
25.5
28.4
27.0
25.8
34.9
25.2
27.8
15.2
17.9
18.2
18.3
18.9
19.2
15.8
8.0
4.1
4.3
4.8
5.8
6.3
6.2
25.0
0.002
51
8.0
10.0
12.0
14.0
16.0
20.0
5.0
dꢀm
dꢀm
dꢀ
8.0
10.0
12.0
14.0
16.0
20.0
5.0
Output Power @ 1 dꢀ compression
8.0
10.0
12.0
14.0
16.0
20.0
12
Noise Figure
Directivity (Isolation-Gain)
DC Current Variation vs. Voltage
Thermal Resistance
dꢀ
mA/mV
°C/W
(3)
Absolute Maximum Ratings
Parameter
Ratings
Operating Temperature
Channel Temperature
DC Voltage VD1, VD2 Pad (4)
DC Voltage RF-IN &RF OUT (4)
Power Dissipation
-40°C to 85°C
150°C
5.5 V
10 V
980 mW
180 mA
20 dꢀm
DC Current VD1 & VD2
Input Power (CW)
1. Measured on Mini-Circuits Die Characterization test board
See Characterization Test Circuit (Fig. 1)
2. At Pout=8 dꢀm/tone
3. Permanent damage may occur if any of these limits are exceeded.
These maximum ratings are not intended for continuous normal operation.
Measured in industry standard 3x3 min 8-lead MCLP package
4. For continuous operation do not exceed 5.2V
®
Mini-Circuits
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 3 of 6
Wideband Monolithic PHEMT MMIC Amplifier
AVA-183A-D+
45
40
35
30
25
20
15
10
Pout
-5dBm
-3dBm
0dBm
3dBm
5dBm
6dBm
7dBm
8dBm
9dBm
10dBm
4000
6000
8000 10000 12000 14000 16000 18000 20000
FREQUENCY (MHz)
Figure 1: Test Circuit used for characterization. Gain, Return loss, Output power at 1dꢀ compression
(P1 dꢀ), output IP3 (OIP3) and noise figure measured using Agilent’s N5242A PNA-X microwave network analyzer.
Conditions:
1. Gain and Return loss: Pin= -25dꢀm
2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 8 dꢀm/tone at output.
Die Layout
Bonding Pad Position
(Dimensions in µm, Typical)
Fig 2. Die Layout
Fig 3. ꢀonding Pad Positions
Critical Dimensions
Parameter
Values
100
Die Thickness, µm
Die Width, µm
1240
Die Length, µm
1240
ꢀond Pad Size, µm
80 x 80
®
Mini-Circuits
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 4 of 6
AVA-183A-D+
Wideband Monolithic PHEMT MMIC Amplifier
Assembly and Handling Procedure
1. Storage
Dice should be stored in a dry nitrogen purged desiccators or equivalent.
2. ESD
MMIC PHEMT amplifier dice are susceptible to electrostatic and mechanical damage. Die are supplied in
antistatic protected material, which should be opened in clean room conditions at an appropriately grounded anti-static worksta
tion. Devices need careful handling using correctly designed collets, vacuum pickup tips or sharp antistatic tweezers to deter
ESD damage to dice.
3. Die Attach
The die mounting surface must be clean and flat. Using conductive silver filled epoxy, recommended epoxies are DieMat
DM6030HK-PT/H579 or Ablestik 84-1LMISR4. Apply sufficient epoxy to meet required epoxy bond line thickness, epoxy fillet
height and epoxy coverage around total die periphery. Parts shall be cured in a nitrogen filled atmosphere per manufacturer’s
cure condition. It is recommended to use antistatic die pick up tools only.
4. Wire ꢀonding
ꢀond pad openings in the surface passivation above the bond pads are provided to allow wire bonding to the dice gold bond
pads. Thermosonic bonding is used with minimized ultrasonic content. ꢀond force, time, ultrasonic power and temperature are
all critical parameters. Suggested wire is pure gold, 1 mil diameter. ꢀonds must be made from the bond pads on the die to
the package or substrate. All bond wires should be kept as short as low as reasonable to minimize performance degradation due
to undesirable series inductance.
Assembly Diagram
Figure 1 & Assembly Diagram
VD1 , VD2
100 pF
RF-IN
RF-Out
Ground
Recommended Wire Length, Typical
Wire Length
(mm)
Wire Loop Height
Wire
(mm)
0.15
0.15
0.15
RF-In, RF-Out
VD1, VD2
Ground
0.25
0.50
0.25
®
Mini-Circuits
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 5 of 6
Wideband Monolithic PHEMT MMIC Amplifier
AVA-183A-D+
Additional Detailed Technical Information
additional information is available on our dash board.
Data Table
Performance Data
Case Style
Swept Graphs
S-Parameter (S2P Files) Data Set with and without port extension(.zip file)
Die
Quantity, Package
Model No.
Small, Gel - Pak: 10,50,100 KGD*
Medium†, Partial wafer: KGD*<5K
Large†, Full Wafer
†Available upon request contact sales representative
AVA-183A-DG+
AVA-183A-DP+
AVA-183A-DF+
Die Ordering and packaging
information
Refer to AN-60-067
Environmental Ratings
ENV-80
*Known Good Dice (“KGD”) means that the dice in question have been subjected to Mini-Circuits DC test performance criteria and measurement
instructions and that the parametric data of such dice fall within a predefined range. While DC testing is not definitive, it does help to provide a higher
degree of confidence that dice are capable of meeting typical RF electrical parameters specified by Mini-Circuits.
ESD Rating**
Human ꢀody Model (HꢀM): Class 1A (250 to <500V) in accordance with ANSI/ESD STM 5.1 - 2001
Machine Model (MM): Class M1 (25V) in accordance with ANSI/ESD STM5.2-1999
** Tested in industry standard 3x3 mm 8-lead MCLP package.
Additional Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended
to be excluded and do not form a part of this specification document.
ꢀ. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s
applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms
and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits
contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder,
please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
D. Mini-Circuits does not warrant the accuracy or completeness of the information, text, graphics and other items
contained within this document and same are provided as an accommodation and on an “As is” basis, with all faults.
E. Purchasers of this part are solely responsible for proper storing, handling, assembly and processing of Known
Good Dice (including, without limitation, proper ESD preventative measures, die preparation, die attach, wire bond
ing and related assembly and test activities), and Mini-Circuits assumes no responsibility therefor or for environmental
effects on Known Good Dice.
F. Mini-Circuits and the Mini-Circuits logo are registered trademarks of Scientific Components Corporation d/b/a Mini-
Circuits. All other third-party trademarks are the property of their respective owners. A reference to any third-party
trademark does not constitute or imply any endorsement, affiliation, sponsorship, or recommendation by any such
third-party of Mini-Circuits or its products.
®
Mini-Circuits
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 6 of 6
相关型号:
AVA-24+
Wide Band Low Power Amplifier, 5000MHz Min, 20000MHz Max, 1 Func, 3 X 3 MM, ROHS COMPLIANT, PLASTIC, CASE DQ849, MCLP, SMT, QFN-8
MINI
©2020 ICPDF网 联系我们和版权申明