ZHL-20W-202-S+ [MINI]
Coaxial High Power Amplifier;型号: | ZHL-20W-202-S+ |
厂家: | MINI-CIRCUITS |
描述: | Coaxial High Power Amplifier |
文件: | 总4页 (文件大小:401K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Coaxial
High Power Amplifier
ZHL-20W-202-S+
50Ω 20W 20 to 2000 MHz
The Big Deal
• Saturated power, 20W
• Wide bandwidth, 20 to 2000 MHz
• High gain, 53 dB typ.
• Self-protected from excessive drive, heat, and
reverse polarity
ZHL-20W-202-S+
ZHL-20W-202X-S+
• Withstands short and open circuit at output
while delivering up to 20W
Product Overview
TheZHL-20W-202-S+isaClassAB, high-poweramplifierproviding20Wsaturatedpoweroverthe20to2000
MHz band, ideal for a variety of high-power test setups as well as applications including communications,
radar and more. The ruggedly-designed amplifier provides unconditional stability and built-in self-protection
against reverse polarity, excessive drive and overheating. The amplifier’s output stage is further protected
in the event of a fault condition, allowing high power operation into an OPEN or SHORT load (refer to the
maximum input power specifications). Housed in a rugged aluminum alloy case measuring 4.3 x 6.7 x 1.2”,
the unit features SMA connectors and an optional heat sink and fan attachment for cooling.
Key Features
Feature
Advantages
Suitable for a broad range of high-power, wideband applications, including test
setups, communications and defense applications.
Ultra Wideband, usable from 20 to 2400 MHz
Enables signal amplification to 20W output without the need for multiple gain
stages.
High gain, 53 dB
In instances of potentially-damaging excessive drive current, heat buildup within
the housing, unshorting of DC supply, and short or open loads at the output, an
automatic sensing feature signals the unit to power down.
Built-in self-protection
Unconditional stability
Provides reliable performance independent of input and load conditions.
®
Mini-Circuits
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 1 of 4
Coaxial
High Power Amplifier
ZHL-20W-202-S+
50Ω 20W 20 to 2000 MHz
Features
• High power, 20 Watt at saturation
• Class AB amplifier
• High IP3, +45 dBm typ.
• Usable from 20 MHz to 2400 MHz
• Good gain flatness, 2.0 dB typ.
• No damage with an open or short output load while
delivering up to 20W
• Shuts off when base plate temperature exceeds +85°C
Model No.
Case Style
Connectors
ZHL-20W-202-S+
BT1689-1
SMA / Solderable pins/D-Sub Male
ZHL-20W-202X-S+▲
Applications
• Cellular
• PCN
• GSM
• ISM
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
• Lab Test
Electrical Specifications at 25°C
ZHL-20W-202-S+
ZHL-20W-202X-S+ ▲
Parameter
Min.
20
Typ.
Max.
2000
56
2.7
—
Min
20
Typ.
Max.
2000
56
2.7
—
Units
MHz
dB
Frequency Range
Gain1
44
53
2.0
+39
+45
10
44
53
2.0
+39
+45
10
Gain Flatness
—
dB
Output Power at 3 dB compression
Output Power at Saturation
Noise Figure
—
dBm
dBm
dB
+42
—
+42
—
—
—
Output third order intercept point
Input VSWR
+45
2.0
3.5
28
—
+45
2.0
3.5
28
—
dBm
:1
—
—
—
—
—
—
—
—
—
—
Output VSWR
—
—
:1
DC Supply Voltage
Supply Current2
30
7
30
7
V
4
4
A
▲ Heat sink and fan not included. Alternative heat sinking and heat
removal must be provided by the user to limit maximum base-plate
temperature to 85°C, in order to ensure proper performance. For ref-
erence, this requires thermal resistance of user’s external heat sink
to be 0.2°C/W max.
1. Small signal input power -50 dBm typ.
2. Power Supply should be capable of delivering 4A at start up.
Maximum Ratings3
Parameter
Ratings
Operating Temperature
Storage Temperature
Base Plate Temperature
-20°C to 60°C
-55°C to 100°C
85°C
+5 dBm4
-13 dBm5
Input RF Power (no damage)
3. Specifications apply to CW signals only permanent damage may occur if any of these
limits are exceeded.
4. Into 50 ohm load.
5. Into open or short load
REV. OR
M169358
ZHL-20W-202-S+
®
Mini-Circuits
MM/SK/CP/AM
190404
Page 2 of 4
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
ZHL-20W-202-S+
Outline Drawing for models with heatsink
MOUNTING INFORMATION FOR MODELS WITHOUT HEATSINK
inch
Outline Dimensions (
)
mm
A
9.85
B
7.30
C
6.50
D
6.00
E
0.98
F
3.75
G
0.13
J
0.47
K
3.34
L
0.71
M
P
4.33
110.00
Q
0.20
R
6.69
S
5.10
T
wt
0.14 grams*
3.45 4565
*880 grams without heatsink
--
--
250.19 185.42 167.64 152.4 24.89 95.25
3.30 12.00 84.80 18.00
5.08 170.00 129.54
®
Mini-Circuits
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 3 of 4
Typical Performance Data/Curves
ZHL-20W-202-S+
NOISE
FIGURE
(dB)
POUT
at 3 dB
COMPR.
(dBm)
POUT
FREQUENCY
GAIN
(dB)
DIRECTIVITY
VSWR
(:1)
OUTPUT
IP3
(dBm)
at SAT
(MHz)
(dB)
(dBm)
28V
28V
IN
OUT
28V
28V
28V
28V
20
100
52.72
53.49
54.40
53.36
51.51
52.78
54.02
51.86
51.68
54.45
53.44
52.20
23.56
44.24
42.84
51.13
51.54
41.59
39.25
37.33
47.11
49.28
38.84
46.50
1.10
1.14
1.14
1.05
1.02
1.01
1.03
1.05
1.04
1.22
1.30
1.19
5.18
4.17
5.21
4.72
4.23
3.67
1.77
1.15
1.18
1.63
2.25
3.10
10.77
10.32
10.08
10.05
10.13
10.21
10.20
10.19
10.18
10.20
10.21
10.23
42.22
41.84
42.04
41.61
41.50
42.74
44.11
43.90
44.73
44.36
43.63
42.77
43.78
43.79
44.61
44.91
44.58
45.28
46.44
45.13
46.67
46.83
45.85
44.47
48.43
48.05
48.84
48.49
48.41
50.12
51.41
52.40
53.08
51.56
50.37
49.86
200
400
600
800
1000
1200
1400
1600
1800
2000
ZHL-20W-202-S+
GAIN
ZHL-20W-202-S+
DIRECTIVITY
ZHL-20W-202-S+
VSWR
at 28V
at 28V
at 28V
6.0
5.0
4.0
3.0
2.0
1.0
55
54
53
52
51
50
60
50
40
30
20
10
IN
OUT
0
500
1000
1500
2000
0
500
1000
1500
2000
0
500
1000
1500
2000
FREQUENCY (MHz)
FREQUENCY (MHz)
FREQUENCY (MHz)
ZHL-20W-202-S+
OUTPUT POWER
ZHL-20W-202-S+
NOISE FIGURE
ZHL-20W-202-S+
OIP3
at 28V
at 28V
at 28V
11.5
11.0
10.5
10.0
9.5
56
54
52
50
48
46
55
Pout at 3 dB COMPRESSION
Pout at SATURATION
50
45
40
35
9.0
0
500
1000
1500
2000
0
500
1000
1500
2000
0
500
1000
1500
2000
FREQUENCY (MHz)
FREQUENCY (MHz)
FREQUENCY (MHz)
Additional Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended
to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s
applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms
and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits
contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder,
please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
®
Mini-Circuits
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 4 of 4
相关型号:
©2020 ICPDF网 联系我们和版权申明