MDWI06-24S12 [MINMAX]
DC-DC CONVERTER 6W;
| 型号： | MDWI06-24S12 |
| 厂家： | 
MINMAX TECHNOLOGY CO., LTD. |
| 描述： | DC-DC CONVERTER 6W DC-DC转换器 |
| 文件： | 总4页 (文件大小：462K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
®
MDWI06 SERIES
DC-DC CONVERTER 6W, Regulated Output, DIP Package
FEATURES
►Smallest Encapsulated 6W Converter
►Industrial Standard DIP-16 Package
►Ultra-wide 4:1 Input Voltage Range
►Fully Regulated Output Voltage
►I/O Isolation 1500 VDC
►Operating Temp. Range -40℃ to +90℃
►Low No Load Power Consumption
►No Min. Load Requirement
►Under-voltage, Overload and Short Circuit Protection
►Shielded Metal Case with Insulated Baseplate
►Conducted EMI EN 55032 Class A & FCC Level A Approved
►UL/cUL/IEC/EN 62368-1 (60950-1) Safety Approval & CE Marking
PRODUCT OVERVIEW
The MINMAX MDWI06 series is the latest generation of high performance DC-DC converter modules setting a new standard concerning power density.
The product offers a full 6W isolated DC-DC converter within an encapsulated DIP-16 package which occupies only 0.5 in2 of PCB space. There are 14
models available for 24, 48VDC with wide 4:1 input voltage range. Further features include under-voltage protection, overload protection, short circuit
protection and no min. load requirement as well. An high efficiency allows operating temperatures range of -40℃ to +90℃.
These DC-DC converters offer a superior solution for many space-critical applications in battery-powered equipment, instrumentation, distributed power
architectures in communication, industrial electronics, energy facilities and many other critical applications where PCB space is limited.
Model Selection Guide
Model
Input
Voltage
(Range)
VDC
Output
Output
Current
Max.
mA
Input Current
Max. capacitive
Load
Efficiency
Number
Voltage
(typ.)
@Max. Load
@No Load
mA(typ.)
@Max. Load
VDC
3.3
5
mA(typ.)
264
305
291
291
287
291
287
132
152
145
145
144
144
144
μF
680
680
330
330
150
150#
150#
680
680
330
330
150
150#
150#
%
MDWI06-24S033
MDWI06-24S05
MDWI06-24S12
MDWI06-24S15
MDWI06-24S24
MDWI06-24D12
MDWI06-24D15
MDWI06-48S033
MDWI06-48S05
MDWI06-48S12
MDWI06-48S15
MDWI06-48S24
MDWI06-48D12
MDWI06-48D15
1500
1200
500
78
82
86
86
87
86
87
78
82
86
86
87
87
87
12
24
(9 ~ 36)
15
400
8
6
24
250
±12
±15
3.3
5
±250
±200
1500
1200
500
12
48
(18 ~ 75)
15
400
24
250
±12
±15
±250
±200
# For each output
E-mail:sales@minmax.com.tw Tel:886-6-2923150
2018/08/31 REV:3 Page 1 of 4
®
MDWI06 SERIES
DC-DC CONVERTER 6W, Regulated Output, DIP Package
Input Specifications
Parameter
Model
Min.
-0.7
-0.7
---
Typ.
---
---
---
---
8
Max.
50
100
9
Unit
24V Input Models
48V Input Models
24V Input Models
48V Input Models
24V Input Models
48V Input Models
All Models
Input Surge Voltage (1 sec. max.)
Start-Up Threshold Voltage
VDC
---
18
---
---
Under Voltage Shutdown
Input Filter
---
16
---
Internal Pi Type
Output Specifications
Parameter
Output Voltage Setting Accuracy
Output Voltage Balance
Line Regulation
Conditions
Min.
---
Typ.
---
Max.
±2.0
±2.0
±0.8
±1.0
Unit
%Vnom.
Dual Output, Balanced Loads
Vin=Min. to Max. @Full Load
Io=0% to 100%
---
±1.0
±0.2
±0.5
%
%
%
---
Load Regulation
---
Minimum Load
No minimum Load Requirement
Ripple & Noise
0-20 MHz Bandwidth
---
---
---
---
---
55
500
±5
mV P-P
μsec
%
Transient Recovery Time
Transient Response Deviation
Temperature Coefficient
Over Load Protection
Short Circuit Protection
25% Load Step Change
±3
---
---
±0.01
150
±0.02
---
%/℃
%
Hiccup
Hiccup Mode 0.5 Hz typ., Automatic Recovery
General Specifications
Parameter
Conditions
60 Seconds
1 Second
Min.
1500
1800
1000
---
Typ.
---
Max.
---
Unit
VDC
VDC
MΩ
I/O Isolation Voltage
---
---
I/O Isolation Resistance
I/O Isolation Capacitance
Switching Frequency
MTBF (calculated)
500 VDC
---
---
100KHz, 1V
500
370
---
---
pF
---
---
KHz
Hours
MIL-HDBK-217F@25℃, Ground Benign
2,951,470
---
UL/cUL 60950-1 recognition (UL certificate), IEC/EN 60950-1(CB-report)
UL/cUL 62368-1 recognition (UL certificate), IEC/EN 62368-1(CB-report)
Safety Approvals
Environmental Specifications
Parameter
Min.
Max.
+90
Unit
Operating Ambient Temperature Range
(See Power Derating Curve)
Case Temperature
-40
℃
---
-50
---
+105
+125
95
℃
℃
% rel. H
Storage Temperature Range
Humidity (non condensing)
Lead Temperature (1.5mm from case for 10Sec.)
---
260
℃
EMC Specifications
Parameter
Standards & Level
Performance
Class A
EMI
Conduction
EN 55024
EN 55032, FCC part 15
A
A
A
A
A
A
ESD
EN 61000-4-2 Air ± 8kV, Contact ± 6kV
EN 61000-4-3 10V/m
Radiated immunity
Fast transient (5)
Surge (5)
EMS
EN 61000-4-4 ±2kV
EN 61000-4-5 ±1kV
EN 61000-4-6 10Vrms
Conducted immunity
PFMF
EN 61000-4-8 100A/m, 1000A/m(1sec.)
E-mail:sales@minmax.com.tw Tel:886-6-2923150
2018/08/31 REV:3 Page 2 of 4
®
MDWI06 SERIES
DC-DC CONVERTER 6W, Regulated Output, DIP Package
Power Derating Curve
100
80
20 LFM
60
40
20
0
~
-40
0
20
40
60
80
100 110
Ambient Temperature
C
Notes
1
2
3
4
5
6
Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%
We recommend to protect the converter by a slow blow fuse in the input supply line.
Other input and output voltage may be available, please contact factory.
To meet EN 61000-4-4 & EN 61000-4-5 an external capacitor across the input pins is required.Suggested capacitor: 220μF/100V.
Specifications are subject to change without notice.
Package Specifications
Mechanical Dimensions
Pin Connections
Pin
1
Single Output
Dual Output
-Vin
-Vin
7
NC
NC
8
NC
Common
+Vout
-Vout
9
+Vout
-Vout
10
16
0.5 [0.02]
+Vin
+Vin
NC: No Connection
1
7
8
9
Bottom View
►All dimensions in mm (inches)
►Tolerance: X.X±0.5 (X.XX±0.02)
16
10
X.XX±0.25 ( X.XXX±0.01)
15.24
[0.60]
3.0
[0.12]
2.54
[0.10]
►Pin diameter 0.5 ±0.05 (0.02±0.002)
23.8 [0.94]
Physical Characteristics
Case Size
Case Material
Pin Material
Weight
:
:
:
:
23.8x13.7x8.0 mm (0.94x0.54x0.31 inches)
Aluminium Alloy, Black Anodized Coating
Tinned Copper
6.1g
E-mail:sales@minmax.com.tw Tel:886-6-2923150
2018/08/31 REV:3 Page 3 of 4
®
MDWI06 SERIES
DC-DC CONVERTER 6W, Regulated Output, DIP Package
Test Setup
Peak-to-Peak Output Noise Measurement Test
Use a Cout 0.47μF ceramic capacitor. Scope measurement should be made by using a BNC socket, measurement bandwidth is 0-20 MHz. Position the load between
50 mm and 75 mm from the DC-DC Converter.
Copper Strip
Cout
+Vin
+Out
-Out
Copper Strip
Cout
+Vin
+Out
Com.
-Out
Scope
Scope
Single Output
DC / DC
Converter
Dual Output
DC / DC
Converter
Resistive
Load
Resistive
Load
Scope
Copper Strip
Cout
-Vin
Copper Strip
-Vin
Copper Strip
Technical Notes
Overload Protection
To provide protection in a fault (output overload) condition, the unit is equipped with internal current limiting circuitry and can endure current limiting for an unlimited
duration. At the point of current-limit inception, the unit shifts from voltage control to current control. The unit operates normally once the output current is brought back
into its specified range.
Input Source Impedance
The power module should be connected to a low ac-impedance input source. Highly inductive source impedances can affect the stability of the power module.
In applications where power is supplied over long lines and output loading is high, it may be necessary to use a capacitor at the input to ensure startup.
Capacitor mounted close to the power module helps ensure stability of the unit, it is recommended to use a good quality low Equivalent Series Resistance (ESR <
1.0Ω at 100 KHz) capacitor of a 2.2μF for the 24V and 48V devices.
+
+Vin
+Out
+
DC / DC
Converter
DC Power
Source
Load
Cin
-
-Vin
-Out
Output Ripple Reduction
A good quality low ESR capacitor placed as close as practicable across the load will give the best ripple and noise performance. To reduce output ripple, it is
recommended to use 3.3μF capacitors at the output.
+
+Vin
+Out
+
+Vin
+Out
Load
Load
Single Output
DC / DC
Converter
Dual Output
DC / DC Com.
Converter
Cout
Cout
DC Power
Source
DC Power
Source
Cout
Load
-
-Vin
-Out
-
-Vin
-Out
Maximum Capacitive Load
The MDWI06 series has limitation of maximum connected capacitance at the output. The power module may be operated in current limiting mode during start-up,
affecting the ramp-up and the startup time. The maximum capacitance can be found in the data sheet.
Thermal Considerations
Many conditions affect the thermal performance of the power module, such as orientation, airflow over the module and board spacing. To avoid exceeding the
maximum temperature rating of the components inside the power module, the case temperature must be kept below 105℃.
The derating curves are determined from measurements obtained in a test setup.
Position of air velocity
probe and thermocouple
Air Flow
50mm / 2in
15mm / 0.6in
DUT
Minmax Technology Co., Ltd.
18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan
Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: sales@minmax.com.tw
2018/08/31 REV:3
Page 4 of 4
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明